Adjust the loop limit to prevent out-of-bounds access when iterating over
PI structures. The loop should not reach the index pcdev->nr_lines since
we allocate exactly pcdev->nr_lines number of PI structures. This fix
ensures proper bounds are maintained during iterations.
Fixes: 9be9567a7c ("net: pse-pd: Add support for PSE PIs")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Message-ID: <20241015130255.125508-1-kory.maincent@bootlin.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
Tariq Toukan says:
====================
mlx5 misc fixes 2024-10-15
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
Series generated against:
commit 174714f0e5 ("selftests: drivers: net: fix name not defined")
====================
Link: https://patch.msgid.link/20241015093208.197603-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: 9b98d395b8 ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, mlx5 driver does not enforce vector index to be lower than
the maximum number of supported completion vectors when requesting a
new completion EQ. Thus, mlx5_comp_eqn_get() fails when trying to
acquire an IRQ with an improper vector index.
To prevent the case above, enforce that vector index value is
valid and lower than maximum in mlx5_comp_eqn_get() before handling the
request.
Fixes: f14c1a14e6 ("net/mlx5: Allocate completion EQs dynamically")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The HWS BWC API uses one lock per queue and usually acquires one of
them, except when doing changes which require locking all queues in
order. Naturally, lockdep isn't too happy about acquiring the same lock
class multiple times, so inform it that each queue lock is a different
class to avoid false positives.
Fixes: 2ca62599aa ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hws_send_queues_bwc_locks_destroy destroyed more queue locks than
allocated, leading to memory corruption (occasionally) and warnings such
as DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) in __mutex_destroy because
sometimes, the 'mutex' being destroyed was random memory.
The severity of this problem is proportional to the number of queues
configured because the code overreaches beyond the end of the
bwc_send_queue_locks array by 2x its length.
Fix that by using the correct number of bwc queues.
Fixes: 2ca62599aa ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix error flow bug that could lead to double free of a buffer
during a failure to calculate a suitable definer layout.
Fixes: 74a778b4a6 ("net/mlx5: HWS, added definers handling")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Removed wrong access to the num_of_rules field of the matcher.
This is a usual u32 variable, but the access was as if it was atomic.
This fixes the following CI warnings:
mlx5hws_bwc.c:708:17: warning: large atomic operation may incur significant performance penalty;
the access size (4 bytes) exceeds the max lock-free size (0 bytes) [-Watomic-alignment]
Fixes: 510f9f61a1 ("net/mlx5: HWS, added API and enabled HWS support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409291101.6NdtMFVC-lkp@intel.com/
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must
only touch as many descriptors, otherwise it ends up corrupting unrelated
memory. Fix the loop iteration count accordingly.
Fixes: c57e558194 ("net: ethernet: mtk_eth_soc: handle dma buffer size soc specific")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241015081755.31060-1-nbd@nbd.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.
If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.
vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:
page = virt_to_page(xdpf->data);
tbi->dma_addr = page_pool_get_dma_addr(page) +
VMXNET3_XDP_HEADROOM;
dma_sync_single_for_device(&adapter->pdev->dev,
tbi->dma_addr, buf_size,
DMA_TO_DEVICE);
The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start.
Fixes: 54f00cce11 ("vmxnet3: Add XDP support.")
Reported-by: Andrew Sauber <andrew.sauber@isovalent.com>
Reported-by: Nikolay Nikolaev <nikolay.nikolaev@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nikolay Nikolaev <nikolay.nikolaev@isovalent.com>
Acked-by: Anton Protopopov <aspsk@isovalent.com>
Cc: William Tu <witu@nvidia.com>
Cc: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://patch.msgid.link/a0888656d7f09028f9984498cc698bb5364d89fc.1728931137.git.daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull rdma fixes from Jason Gunthorpe:
"Several miscellaneous fixes. A lot of bnxt_re activity, there will be
more rc patches there coming.
- Many bnxt_re bug fixes - Memory leaks, kasn, NULL pointer deref,
soft lockups, error unwinding and some small functional issues
- Error unwind bug in rdma netlink
- Two issues with incorrect VLAN detection for iWarp
- skb_splice_from_iter() splat in siw
- Give SRP slab caches unique names to resolve the merge window
WARN_ON regression"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Fix the GID table length
RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages
RDMA/bnxt_re: Change the sequence of updating the CQ toggle value
RDMA/bnxt_re: Fix an error path in bnxt_re_add_device
RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop
RDMA/bnxt_re: Fix a possible NULL pointer dereference
RDMA/bnxt_re: Return more meaningful error
RDMA/bnxt_re: Fix incorrect dereference of srq in async event
RDMA/bnxt_re: Fix out of bound check
RDMA/bnxt_re: Fix the max CQ WQEs for older adapters
RDMA/srpt: Make slab cache names unique
RDMA/irdma: Fix misspelling of "accept*"
RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP
RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES
RDMA/core: Fix ENODEV error for iWARP test over vlan
RDMA/nldev: Fix NULL pointer dereferences issue in rdma_nl_notify_event
RDMA/bnxt_re: Fix the max WQEs used in Static WQE mode
RDMA/bnxt_re: Add a check for memory allocation
RDMA/bnxt_re: Fix incorrect AVID type in WQE structure
RDMA/bnxt_re: Fix a possible memory leak
Pull btrfs fixes from David Sterba:
- regression fix: dirty extents tracked in xarray for qgroups must be
adjusted for 32bit platforms
- fix potentially freeing uninitialized name in fscrypt structure
- fix warning about unneeded variable in a send callback
* tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
btrfs: send: cleanup unneeded return variable in changed_verity()
btrfs: fix uninitialized pointer free in add_inode_ref()
btrfs: use sector numbers as keys for the dirty extents xarray
Pull smb server fixes from Steve French:
- fix race between session setup and session logoff
- add supplementary group support
* tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for supplementary groups
ksmbd: fix user-after-free from session log off
Pull crypto fixes from Herbert Xu:
- Remove bogus testmgr ENOENT error messages
- Ensure algorithm is still alive before marking it as tested
- Disable buggy hash algorithms in marvell/cesa
* tag 'v6.12-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: marvell/cesa - Disable hash algorithms
crypto: testmgr - Hide ENOENT errors better
crypto: api - Fix liveliness check in crypto_alg_tested
Pull sched_ext fixes from Tejun Heo:
- More issues reported in the enable/disable paths on large machines
with many tasks due to scx_tasks_lock being held too long. Break up
the task iterations
- Remove ops.select_cpu() dependency in bypass mode so that a
misbehaving implementation can't live-lock the machine by pushing all
tasks to few CPUs in bypass mode
- Other misc fixes
* tag 'sched_ext-for-6.12-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove unnecessary cpu_relax()
sched_ext: Don't hold scx_tasks_lock for too long
sched_ext: Move scx_tasks_lock handling into scx_task_iter helpers
sched_ext: bypass mode shouldn't depend on ops.select_cpu()
sched_ext: Move scx_buildin_idle_enabled check to scx_bpf_select_cpu_dfl()
sched_ext: Start schedulers with consistent p->scx.slice values
Revert "sched_ext: Use shorter slice while bypassing"
sched_ext: use correct function name in pick_task_scx() warning message
selftests: sched_ext: Add sched_ext as proper selftest target
Similar to the situation described for sja1105 in commit 1f9fc48fd3
("net: dsa: sja1105: fix reception from VLAN-unaware bridges"), the
vsc73xx driver uses tag_8021q and doesn't need the ds->untag_bridge_pvid
request. In fact, this option breaks packet reception.
The ds->untag_bridge_pvid option strips VLANs from packets received on
VLAN-unaware bridge ports. But those VLANs should already be stripped
by tag_vsc73xx_8021q.c as part of vsc73xx_rcv() - they are not VLANs in
VLAN-unaware mode, but DSA tags. Thus, dsa_software_vlan_untag() tries
to untag a VLAN that doesn't exist, corrupting the packet.
Fixes: 93e4649efa ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20241014153041.1110364-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent work moving the reporting of Rx software timestamps to the core
[1] highlighted an issue where hardware time stamping was advertised
for the platforms where it is not supported.
Fix this by covering advertising support for hardware timestamps only if
the hardware supports it. Due to the Tx implementation in RAVB software
Tx timestamping is also only considered if the hardware supports
hardware timestamps. This should be addressed in future, but this fix
only reflects what the driver currently implements.
1. Commit 277901ee3a ("ravb: Remove setting of RX software timestamp")
Fixes: 7e09a052dc ("ravb: Exclude gPTP feature support for RZ/G2L")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/20241014124343.3875285-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If:
1) the user requested USO, but
2) there is not enough payload for GSO to kick in, and
3) the egress device doesn't offer checksum offload, then
we want to compute the L4 checksum in software early on.
In the case when we are not taking the GSO path, but it has been requested,
the software checksum fallback in skb_segment doesn't get a chance to
compute the full checksum, if the egress device can't do it. As a result we
end up sending UDP datagrams with only a partial checksum filled in, which
the peer will discard.
Fixes: 10154dbded ("udp: Allow GSO transmit from devices with no checksum offload")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241011-uso-swcsum-fixup-v2-1-6e1ddc199af9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the Marvell datasheet the 88E6361 has two VTU pages
(4k VIDs per page) so the max_vid should be 8191, not 4095.
In the current implementation mv88e6xxx_vtu_walk() gives unexpected
results because of this error. I verified that mv88e6xxx_vtu_walk()
works correctly on the MV88E6361 with this patch in place.
Fixes: 12899f2998 ("net: dsa: mv88e6xxx: enable support for 88E6361 switch")
Signed-off-by: Peter Rashleigh <peter@rashleigh.ca>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241014204342.5852-1-peter@rashleigh.ca
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc394 ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()d
5. reqsk timer is executed again, and BPF touches req->sk
Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().
Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]
[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0
Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6
allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
Fixes: 83fccfc394 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Closes: https://lore.kernel.org/netdev/eb6684d0-ffd9-4bdc-9196-33f690c25824@linux.dev/
Link: https://lore.kernel.org/netdev/b55e2ca0-42f2-4b7c-b445-6ffd87ca74a0@linux.dev/ [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241014223312.4254-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ring-buffer fixes from Steven Rostedt:
- Fix ref counter of buffers assigned at boot up
A tracing instance can be created from the kernel command line. If it
maps to memory, it is considered permanent and should not be deleted,
or bad things can happen. If it is not mapped to memory, then the
user is fine to delete it via rmdir from the instances directory. But
the ref counts assumed 0 was free to remove and greater than zero was
not. But this was not the case. When an instance is created, it
should have the reference of 1, and if it should not be removed, it
must be greater than 1. The boot up code set normal instances with a
ref count of 0, which could get removed if something accessed it and
then released it. And memory mapped instances had a ref count of 1
which meant it could be deleted, and bad things happen. Keep normal
instances ref count as 1, and set memory mapped instances ref count
to 2.
- Protect sub buffer size (order) updates from other modifications
When a ring buffer is changing the size of its sub-buffers, no other
operations should be performed on the ring buffer. That includes
reading it. But the locking only grabbed the buffer->mutex that keeps
some operations from touching the ring buffer. It also must hold the
cpu_buffer->reader_lock as well when updates happen as other paths
use that to do some operations on the ring buffer.
* tag 'trace-ringbuffer-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix reader locking when changing the sub buffer order
ring-buffer: Fix refcount setting of boot mapped buffers
Pull bcachefs fixes from Kent Overstreet:
- New metadata version inode_has_child_snapshots
This fixes bugs with handling of unlinked inodes + snapshots, in
particular when an inode is reattached after taking a snapshot;
deleted inodes now get correctly cleaned up across snapshots.
- Disk accounting rewrite fixes
- validation fixes for when a device has been removed
- fix journal replay failing with "journal_reclaim_would_deadlock"
- Some more small fixes for erasure coding + device removal
- Assorted small syzbot fixes
* tag 'bcachefs-2024-10-14' of git://evilpiepirate.org/bcachefs: (27 commits)
bcachefs: Fix sysfs warning in fstests generic/730,731
bcachefs: Handle race between stripe reuse, invalidate_stripe_to_dev
bcachefs: Fix kasan splat in new_stripe_alloc_buckets()
bcachefs: Add missing validation for bch_stripe.csum_granularity_bits
bcachefs: Fix missing bounds checks in bch2_alloc_read()
bcachefs: fix uaf in bch2_dio_write_done()
bcachefs: Improve check_snapshot_exists()
bcachefs: Fix bkey_nocow_lock()
bcachefs: Fix accounting replay flags
bcachefs: Fix invalid shift in member_to_text()
bcachefs: Fix bch2_have_enough_devs() for BCH_SB_MEMBER_INVALID
bcachefs: __wait_for_freeing_inode: Switch to wait_bit_queue_entry
bcachefs: Check if stuck in journal_res_get()
closures: Add closure_wait_event_timeout()
bcachefs: Fix state lock involved deadlock
bcachefs: Fix NULL pointer dereference in bch2_opt_to_text
bcachefs: Release transaction before wake up
bcachefs: add check for btree id against max in try read node
bcachefs: Disk accounting device validation fixes
bcachefs: bch2_inode_or_descendents_is_open()
...
Explicitly verify that MPC connection attempts towards a port-based
signal endpoint fail with a reset.
Note that this new test is a bit different from the other ones, not
using 'run_tests'. It is then needed to add the capture capability, and
the picking the right port which have been extracted into three new
helpers. The info about the capture can also be printed from a single
point, which simplifies the exit paths in do_transfer().
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 1729cf186d ("mptcp: create the listening socket for new port")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A boot delay was introduced by commit 79540d133e ("net: macb: Fix
handling of fixed-link node"). This delay was caused by the call to
`mdiobus_register()` in cases where a fixed-link PHY was present. The
MDIO bus registration triggered unnecessary PHY address scans, leading
to a 20-second delay due to attempts to detect Clause 45 (C45)
compatible PHYs, despite no MDIO bus being attached.
The commit 79540d133e ("net: macb: Fix handling of fixed-link node")
was originally introduced to fix a regression caused by commit
7897b071ac ("net: macb: convert to phylink"), which caused the driver
to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings
like:
mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31
This patch reworks the logic to avoid registering and allocation of the
MDIO bus when:
- The device tree contains a fixed-link node.
- There is no "mdio" child node in the device tree.
If a child node named "mdio" exists, the MDIO bus will be registered to
support PHYs attached to the MACB's MDIO bus. Otherwise, with only a
fixed-link, the MDIO bus is skipped.
Tested on a sama5d35 based system with a ksz8863 switch attached to
macb0.
Fixes: 79540d133e ("net: macb: Fix handling of fixed-link node")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On RX, we shouldn't be incrementing the stats for an arbitrary SA in
case the actual SA hasn't been set up. Those counters are intended to
track packets for their respective AN when the SA isn't currently
configured. Due to the way MACsec is implemented, we don't keep
counters unless the SA is configured, so we can't track those packets,
and those counters will remain at 0.
The RXSC's stats keeps track of those packets without telling us which
AN they belonged to. We could add counters for non-existent SAs, and
then find a way to integrate them in the dump to userspace, but I
don't think it's worth the effort.
Fixes: 91ec9bd57f ("macsec: Fix traffic counters/statistics")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/f5ac92aaa5b89343232615f4c03f9f95042c6aa0.1728657709.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Tegra MGBE driver sometimes fails to initialize, reporting the
following error, and as a result, it is unable to acquire an IP
address with DHCP:
tegra-mgbe 6800000.ethernet: timeout waiting for link to become ready
As per the recommendation from the Tegra hardware design team, fix this
issue by:
- clearing the PHY_RDY bit before setting the CDR_RESET bit and then
setting PHY_RDY bit before clearing CDR_RESET bit. This ensures valid
data is present at UPHY RX inputs before starting the CDR lock.
- adding the required delays when bringing up the UPHY lane. Note we
need to use delays here because there is no alternative, such as
polling, for these cases. Using the usleep_range() instead of ndelay()
as sleeping is preferred over busy wait loop.
Without this change we would see link failures on boot sometimes as
often as 1 in 5 boots. With this fix we have not observed any failures
in over 1000 boots.
Fixes: d8ca113724 ("net: stmmac: tegra: Add MGBE support")
Signed-off-by: Paritosh Dixit <paritoshd@nvidia.com>
Link: https://patch.msgid.link/20241010142908.602712-1-paritoshd@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
