U-Boot doesn't have cells at hardcoded addresses. They are stored in
internal format. It's still important to define relevant cells in DT so
NVMEM consumers can reference them.
Update binding to allow including basic cells as NVMEM device subnodes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/r/20220703084843.21922-1-zajec5@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
SMD edge contains subnodes representing devices related to the remote
processor. With limietd number of remote processors, there is a limited
set of such devices.
List all of them in smd-edge bindings so schema can strictly check for
subnodes.
Additional benefit is requirement of "qcom,smd-channels" for such
subnodes, because their schema cannot enforce it (few devices like APR
or FastRPC can be part of either SMD or GLINK edge).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
GLINK edge contains subnodes representing devices related to the remote
processor. Each of such device (e.g. APR or FastRPC) must have
a "qcom,glink-channels" property. However the APR or FastRPC device can
be also part of other communication - SMD - thus their schema does not
require "qcom,glink-channels".
To make the GLINK edge bindings strict, require "qcom,glink-channels"
for its children.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
If the properties 'linux,initrd-start' and 'linux,initrd-end' of
the chosen node populated from the bootloader, eg. U-Boot, are so that
start > end, then the phys_initrd_size calculated from end - start is
negative that subsequently gets converted to a high positive value for
being unsigned long long. Then, the memory region with the (invalid)
size is added to the bootmem and attempted being paged in paging_init()
that results in the kernel fault.
For example, on the FVP ARM64 system I'm running, the U-Boot populates
the 'linux,initrd-start' with 8800_0000 and 'linux,initrd-end' with 0.
The phys_initrd_size calculated is then ffff_ffff_7800_0000
(= 0 - 8800_0000 = -8800_0000 + ULLONG_MAX + 1). paging_init() then
attempts to map the address 8800_0000 + ffff_ffff_7800_0000 and oops'es
as below.
It should be stressed, it is generally a fault of the bootloader's with
the kernel relying on it, however we should not allow the bootloader's
misconfiguration to lead to the kernel oops. Not only the kernel should be
bullet proof against it but also finding the root cause of the paging
fault spanning over the bootloader, DT, and kernel may happen is not so
easy.
Unable to handle kernel paging request at virtual address fffffffefe43c000
Mem abort info:
ESR = 0x96000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000007
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
[fffffffefe43c000] pgd=0000000080de9003, pud=0000000080de9003
Unable to handle kernel paging request at virtual address ffffff8000de9f90
Mem abort info:
ESR = 0x96000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
[ffffff8000de9f90] pgd=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.51-yocto-standard #1
Hardware name: FVP Base (DT)
pstate: 60000085 (nZCv daIf -PAN -UAO)
pc : show_pte+0x12c/0x1b4
lr : show_pte+0x100/0x1b4
sp : ffffffc010ce3b30
x29: ffffffc010ce3b30 x28: ffffffc010ceed80
x27: fffffffefe43c000 x26: fffffffefe43a028
x25: 0000000080bf0000 x24: 0000000000000025
x23: ffffffc010b8d000 x22: ffffffc010e3d000
x23: ffffffc010b8d000 x22: ffffffc010e3d000
x21: 0000000080de9000 x20: ffffff7f80000f90
x19: fffffffefe43c000 x18: 0000000000000030
x17: 0000000000001400 x16: 0000000000001c00
x15: ffffffc010cef1b8 x14: ffffffffffffffff
x13: ffffffc010df1f40 x12: ffffffc010df1b70
x11: ffffffc010ce3b30 x10: ffffffc010ce3b30
x9 : 00000000ffffffc8 x8 : 0000000000000000
x7 : 000000000000000f x6 : ffffffc010df16e8
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 00000000ffffffff x2 : 0000000000000000
x1 : 0000008080000000 x0 : ffffffc010af1d68
Call trace:
show_pte+0x12c/0x1b4
die_kernel_fault+0x54/0x78
__do_kernel_fault+0x11c/0x128
do_translation_fault+0x58/0xac
do_mem_abort+0x50/0xb0
el1_da+0x1c/0x90
__create_pgd_mapping+0x348/0x598
paging_init+0x3f0/0x70d0
setup_arch+0x2c0/0x5d4
start_kernel+0x94/0x49c
Code: 92748eb5 900052a0 9135a000 cb010294 (f8756a96)
Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
Link: https://lore.kernel.org/r/20220909023358.76881-1-marek.bykowski@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
For K3 devices the clock fed into the RNG module is shared with the rest
of the Crypto module, it is not dedicated to the RNG module and cannot be
controlled by the RNG driver. The driver does not require this clock to
always be defined and the DT binding should not force it either.
Remove this so we can start dropping out the clock properties as needed.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20220901171041.32056-1-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Qualcomm FastRPC bindings to yaml format, so that we could validate
dt-entries correctly and any future additions can go into yaml format.
Use compute-cb@ subnodes instead of just cb@. Add qcom,glink-channels and
qcom,smd-channels missing properties to make sure dtbs_check doesn't fail
right off the bat. Correct the name of the parent node in the example from
smd-edge to glink-edge.
Since now the qcom,fastrpc bindings document is yaml, update the
reference to it in qcom,glink-edge and also use $ref.
Also update the MAINTAINERS file to point to the yaml version.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220907074301.3996021-1-abel.vesa@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Make OF unittest trigger the new TAINT_TEST taint when OF unittest runs.
Due to OF unittest not being intended to run on production systems, and
potentially causing problems (or security issues like leaking kernel
addresses), the kernel's state should not be considered safe for
production use after OF unittest runs.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20220823200152.3465751-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
A GICv3 implementation without virtualization, such as the base QEMU
virt machine (without -M virtualization=on), does not issue maintenance
interrupts. Therefore its device-tree node does not need an 'interrupts'
property. Currently, validating the QEMU virt device-tree throws a
warning that 'interrupts' is missing. Make it optional.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220822152224.507497-3-jean-philippe@linaro.org
Even PSCI v1.0 compliant implementations may support v0.1 clients
(i.e. "arm,psci"). Relax the compatible schema such that an
implementation can claim 1.0, 0.2, and 0.1 compatibility.
In the process, the schema can be simplified a bit by using 'minItems'
instead of separate 'oneOf' entries.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220803201639.2552581-1-robh@kernel.org
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.
Fixes: 868941b144 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
