Pull gpio fixes from Bartosz Golaszewski:
- fix a build error in gpio-vf610
- fix a null-pointer dereference in the GPIO character device code
* tag 'gpio-fixes-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: fix null pointer dereference in linereq_free()
gpio: vf610: fix compilation error
Pull block fixes from Jens Axboe:
"NVMe pull request with another id quirk addition, and a tracing fix"
* tag 'block-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
Pull io_uring tweak from Jens Axboe:
"Just a minor tweak to an addition made in this release cycle: padding
a 32-bit value that's in a 64-bit union to avoid any potential
funkiness from that"
* tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
io_uring: explicit sqe padding for ioctl commands
Pull fbdev fixes from Helge Deller:
- fbcon now prevents switching to screen resolutions which are smaller
than the font size, and prevents enabling a font which is bigger than
the current screen resolution. This fixes vmalloc-out-of-bounds
accesses found by KASAN.
- Guiling Deng fixed a bug where the centered fbdev logo wasn't
displayed correctly if the screen size matched the logo size.
- Hsin-Yi Wang provided a patch to include errno.h to fix build when
CONFIG_OF isn't enabled.
* tag 'for-5.19/fbdev-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Use fbcon_info_from_console() in fbcon_modechange_possible()
fbmem: Check virtual screen sizes in fb_set_var()
fbcon: Prevent that screen size is smaller than font size
fbcon: Disallow setting font bigger than screen size
video: of_display_timing.h: include errno.h
fbdev: fbmem: Fix logo center image dx issue
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.19
- another bogus identifier quirk (Keith Busch)
- use struct group in the tracer to avoid a gcc warning (Keith Busch)"
* tag 'nvme-5.19-2022-07-07' of git://git.infradead.org/nvme:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
Pull LoongArch fixes from Huacai Chen:
"A fix for tinyconfig build error, a fix for section mismatch warning,
and two cleanups of obsolete code"
* tag 'loongarch-fixes-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix section mismatch warning
LoongArch: Fix build errors for tinyconfig
LoongArch: Remove obsolete mentions of vcsr
LoongArch: Drop these obsolete selects in Kconfig
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter, can, and bluetooth.
Current release - regressions:
- bluetooth: fix deadlock on hci_power_on_sync
Previous releases - regressions:
- sched: act_police: allow 'continue' action offload
- eth: usbnet: fix memory leak in error case
- eth: ibmvnic: properly dispose of all skbs during a failover
Previous releases - always broken:
- bpf:
- fix insufficient bounds propagation from
adjust_scalar_min_max_vals
- clear page contiguity bit when unmapping pool
- netfilter: nft_set_pipapo: release elements in clone from
abort path
- mptcp: netlink: issue MP_PRIO signals from userspace PMs
- can:
- rcar_canfd: fix data transmission failed on R-Car V3U
- gs_usb: gs_usb_open/close(): fix memory leak
Misc:
- add Wenjia as SMC maintainer"
* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
wireguard: Kconfig: select CRYPTO_CHACHA_S390
crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
wireguard: selftests: use microvm on x86
wireguard: selftests: always call kernel makefile
wireguard: selftests: use virt machine on m68k
wireguard: selftests: set fake real time in init
r8169: fix accessing unset transport header
net: rose: fix UAF bug caused by rose_t0timer_expiry
usbnet: fix memory leak in error case
Revert "tls: rx: move counting TlsDecryptErrors for sync"
mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
mptcp: fix local endpoint accounting
selftests: mptcp: userspace PM support for MP_PRIO signals
mptcp: netlink: issue MP_PRIO signals from userspace PMs
mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
mptcp: Avoid acquiring PM lock for subflow priority changes
mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
net/mlx5e: Fix matchall police parameters validation
net/sched: act_police: allow 'continue' action offload
net: lan966x: hardcode the number of external ports
...
Pull pin control fixes from Linus Walleij:
- Tag Intel pin control as supported in MAINTAINERS
- Fix a NULL pointer exception in the Aspeed driver
- Correct some NAND functions in the Sunxi A83T driver
- Use the right offset for some Sunxi pins
- Fix a zero base offset in the Freescale (NXP) i.MX93
- Fix the IRQ support in the STM32 driver
* tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: fix optional IRQ support to gpios
pinctrl: imx: Add the zero base flag for imx93
pinctrl: sunxi: sunxi_pconf_set: use correct offset
pinctrl: sunxi: a83t: Fix NAND function name for some pins
pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
MAINTAINERS: Update Intel pin control to Supported
These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.
It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".
Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running. Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a kernel NULL pointer dereference reported by gpio kselftests.
linereq_free() can be called as part of the cleanup of a failed request,
at which time the desc for a line may not have been determined, so it
is unsafe to dereference without a check.
Add a check prior to dereferencing the line desc.
Fixes: 2068339a6c ("gpiolib: cdev: Add hardware timestamp clock type")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
init_numa_memory() is annotated __init and not used by any module,
thus don't export it.
Remove not needed EXPORT_SYMBOL for init_numa_memory() to fix the
following section mismatch warning:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab+init_numa_memory+0x0): Section mismatch in reference
from the variable __ksymtab_init_numa_memory to the function .init.text:init_numa_memory()
The symbol init_numa_memory is exported and annotated __init
Fix this by removing the __init annotation of init_numa_memory or drop the export.
This is build on Linux 5.19-rc4.
Fixes: d4b6f1562a ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Building loongarch:tinyconfig fails with the following error.
./arch/loongarch/include/asm/page.h: In function 'pfn_valid':
./arch/loongarch/include/asm/page.h:42:32: error: 'PHYS_OFFSET' undeclared
Add the missing include file and fix succeeding vdso errors.
Fixes: 09cfefb7fa ("LoongArch: Add memory management")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The `vcsr` only exists in the old hardware design, it isn't used in any
shipped hardware from Loongson-3A5000 on. Both scalar FP and LSX/LASX
instructions use the `fcsr` as their control and status registers now.
For example, the RM control bit in fcsr0 is shared by FP, LSX and LASX
instructions.
Particularly, fcsr16 to fcsr31 are reserved for LSX/LASX now, access to
these registers has no visible effect if LSX/LASX is enabled, and will
cause SXD/ASXD exceptions if LSX/LASX is not enabled.
So, mentions of vcsr are obsolete in the first place (it was just used
for debugging), let's remove them.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit fa96b57c14 ("LoongArch: Add build infrastructure") adds the new
file arch/loongarch/Kconfig.
As the work on LoongArch was probably quite some time under development,
various config symbols have changed and disappeared from the time of
initial writing of the Kconfig file and its inclusion in the repository.
The following four commits:
commit c126a53c27 ("arch: remove GENERIC_FIND_FIRST_BIT entirely")
commit 140c8180eb ("arch: remove HAVE_COPY_THREAD_TLS")
commit aca52c3983 ("mm: remove CONFIG_HAVE_MEMBLOCK")
commit 3f08a302f5 ("mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option")
remove the mentioned config symbol, and enable the intended setup by
default without configuration.
Drop these obsolete selects in loongarch's Kconfig.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Use the fbcon_info_from_console() wrapper which was added to kernel
v5.19 with commit 409d6c95f9 ("fbcon: Introduce wrapper for console->fb_info lookup").
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Verify that the fbdev or drm driver correctly adjusted the virtual
screen sizes. On failure report the failing driver and reject the screen
size change.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
We need to prevent that users configure a screen size which is smaller than the
currently selected font size. Otherwise rendering chars on the screen will
access memory outside the graphics memory region.
This patch adds a new function fbcon_modechange_possible() which
implements this check and which later may be extended with other checks
if necessary. The new function is called from the FBIOPUT_VSCREENINFO
ioctl handler in fbmem.c, which will return -EINVAL if userspace asked
for a too small screen size.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
Prevent that users set a font size which is bigger than the physical screen.
It's unlikely this may happen (because screens are usually much larger than the
fonts and each font char is limited to 32x32 pixels), but it may happen on
smaller screens/LCD displays.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v4.14+
Jason A. Donenfeld says:
====================
wireguard patches for 5.19-rc6
1) A few small fixups to the selftests, per usual. Of particular note is
a fix for a test flake that occurred on especially fast systems that
boot in less than a second.
2) An addition during this cycle of some s390 crypto interacted with the
way wireguard selects dependencies, resulting in linker errors
reported by the kernel test robot. So Vladis sent in a patch for
that, which also required a small preparatory fix moving some Kconfig
symbols around.
====================
Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various accelerated software implementation Kconfig values for S390 were
mistakenly placed into drivers/crypto/Kconfig, even though they're
mainly just SIMD code and live in arch/s390/crypto/ like usual. This
gives them the very unusual dependency on CRYPTO_HW, which leads to
problems elsewhere.
This patch fixes the issue by moving the Kconfig values for non-hardware
drivers into the usual place in crypto/Kconfig.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes for faster tests, faster compile time, and allows us to ditch
ACPI finally.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all platforms have an RTC, and rather than trying to force one into
each, it's much easier to just set a fixed time. This is necessary
because WireGuard's latest handshakes parameter is returned in wallclock
time, and if the system time isn't set, and the system is really fast,
then this returns 0, which trips the test.
Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl
doesn't support settimeofday without it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are UAF bugs caused by rose_t0timer_expiry(). The
root cause is that del_timer() could not stop the timer
handler that is running and there is no synchronization.
One of the race conditions is shown below:
(thread 1) | (thread 2)
| rose_device_event
| rose_rt_device_down
| rose_remove_neigh
rose_t0timer_expiry | rose_stop_t0timer(rose_neigh)
... | del_timer(&neigh->t0timer)
| kfree(rose_neigh) //[1]FREE
neigh->dce_mode //[2]USE |
The rose_neigh is deallocated in position [1] and use in
position [2].
The crash trace triggered by POC is like below:
BUG: KASAN: use-after-free in expire_timers+0x144/0x320
Write of size 8 at addr ffff888009b19658 by task swapper/0/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0xbf/0xee
print_address_description+0x7b/0x440
print_report+0x101/0x230
? expire_timers+0x144/0x320
kasan_report+0xed/0x120
? expire_timers+0x144/0x320
expire_timers+0x144/0x320
__run_timers+0x3ff/0x4d0
run_timer_softirq+0x41/0x80
__do_softirq+0x233/0x544
...
This patch changes rose_stop_ftimer() and rose_stop_t0timer()
in rose_remove_neigh() to del_timer_sync() in order that the
timer handler could be finished before the resources such as
rose_neigh and so on are deallocated. As a result, the UAF
bugs could be mitigated.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull OpenRISC fixes from Stafford Horne:
"Fixups for OpenRISC found during recent testing:
- An OpenRISC irqchip fix to stop acking level interrupts which was
causing issues on SMP platforms
- A comment typo fix in our unwinder code"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: unwinder: Fix grammar issue in comment
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
Pull sound fixes from Takashi Iwai:
"This became largish as it includes the pending ASoC fixes.
Almost all changes are device-specific small fixes, while many of them
are coverage for mixer issues that were detected by selftest. In
addition, usual suspects for HD/USB-audio are there"
* tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (43 commits)
ALSA: cs46xx: Fix missing snd_card_free() call at probe error
ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
ALSA: usb-audio: Add quirk for Fiero SC-01
ALSA: hda/realtek: Add quirk for Clevo L140PU
ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
ASoC: madera: Fix event generation for rate controls
ASoC: madera: Fix event generation for OUT1 demux
ASoC: cs47l15: Fix event generation for low power mux control
ASoC: cs35l41: Add ASP TX3/4 source to register patch
ASoC: dapm: Initialise kcontrol data for mux/demux controls
ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
ASoC: cs35l41: Correct some control names
ASoC: wm5110: Fix DRE control
ASoC: wm_adsp: Fix event for preloader
MAINTAINERS: update ASoC Qualcomm maintainer email-id
ASoC: rockchip: i2s: switch BCLK to GPIO
ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states
ASoC: SOF: pm: add definitions for S4 and S5 states
ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2
ASoC: SOF: Intel: hda: Fix compressed stream position tracking
...
If CONFIG_OF is not enabled, default of_get_display_timing() returns an
errno, so include the header.
Fixes: 422b67e0b3 ("videomode: provide dummy inline functions for !CONFIG_OF")
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Image.dx gets wrong value because of missing '()'.
If xres == logo->width and n == 1, image.dx = -16.
Signed-off-by: Guiling Deng <greens9@163.com>
Fixes: 3d8b1933eb ("fbdev: fbmem: add config option to center the bootup logo")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Helge Deller <deller@gmx.de>
This reverts commit 284b4d93da.
When using TLS device offload and coming from tls_device_reencrypt()
flow, -EBADMSG error in tls_do_decryption() should not be counted
towards the TLSTlsDecryptError counter.
Move the counter increase back to the decrypt_internal() call site in
decrypt_skb_update().
This also fixes an issue where:
if (n_sgin < 1)
return -EBADMSG;
Errors in decrypt_internal() were not counted after the cited patch.
Fixes: 284b4d93da ("tls: rx: move counting TlsDecryptErrors for sync")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Path manager fixes for 5.19
The MPTCP userspace path manager is new in 5.19, and these patches fix
some issues in that new code.
Patches 1-3 fix path manager locking issues.
Patches 4 and 5 allow userspace path managers to change priority of
established subflows using the existing MPTCP_PM_CMD_SET_FLAGS generic
netlink command. Includes corresponding self test update.
Patches 6 and 7 fix accounting of available endpoint IDs and the
MPTCP_MIB_RMSUBFLOW counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm
destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow.
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available
the id corresponding to the just removed address.
The used bitmap actually tracks only the local IDs: we must
restrict the operation when a (local) subflow is removed.
Fixes: a88c9e4969 ("mptcp: do not block subflows creation on errors")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the testing sample (pm_nl_ctl) to exercise
the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to
issue MP_PRIO signals over the selected subflow.
E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003
userspace_pm.sh has a new selftest that invokes this command.
Fixes: 259a834fad ("selftests: mptcp: functional tests for the userspace PM type")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting up a subflow's flags for sending MP_PRIO MPTCP options, the
subflow socket lock was not held while reading and modifying several
struct members that are also read and modified in mptcp_write_options().
Acquire the subflow socket lock earlier and send the MP_PRIO ACK with
that lock already acquired. Add a new variant of the
mptcp_subflow_send_ack() helper to use with the subflow lock held.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The in-kernel path manager code for changing subflow flags acquired both
the msk socket lock and the PM lock when possibly changing the "backup"
and "fullmesh" flags. mptcp_pm_nl_mp_prio_send_ack() does not access
anything protected by the PM lock, and it must release and reacquire
the PM lock.
By pushing the PM lock to where it is needed in mptcp_pm_nl_fullmesh(),
the lock is only acquired when the fullmesh flag is changed and the
backup flag code no longer has to release and reacquire the PM lock. The
change in locking context requires the MIB update to be modified - move
that to a better location instead.
This change also makes it possible to call
mptcp_pm_nl_mp_prio_send_ack() for the userspace PM commands without
manipulating the in-kernel PM lock.
Fixes: 0f9f696a50 ("mptcp: add set_flags command in PM netlink")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The user-space PM subflow removal path uses a couple of helpers
that must be called under the msk socket lock and the current
code lacks such requirement.
Change the existing lock scope so that the relevant code is under
its protection.
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/287
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
net: Fix police 'continue' action offload
TC act_police with 'continue' action had been supported by mlx5 matchall
classifier offload implementation for some time. However, 'continue' was
assumed implicitly and recently got broken in multiple places. Fix it in
both TC hardware offload validation code and mlx5 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Referenced commit prepared the code for upcoming extension that allows mlx5
to offload police action attached to flower classifier. However, with
regard to existing matchall classifier offload validation should be
reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police
action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police
action and extend scan_tc_matchall_fdb_actions() to only allow such actions
with matchall classifier.
Fixes: d97b4b105c ("flow_offload: reject offload for all drivers with invalid police parameters")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even
though it was supported by mlx5 matchall offload implementation, which
didn't verify the action type but instead assumed that any single police
action attached to matchall classifier is a 'continue' action. Lack of
action type check made it non-obvious what mlx5 matchall implementation
actually supports and caused implementers and reviewers of referenced
commits to disallow it as a part of improved validation code.
Fixes: b8cd5831c6 ("net: flow_offload: add tc police action parameters")
Fixes: b50e462bc2 ("net/sched: act_police: Add extack messages for offload failure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of counting the child nodes in the device tree, hardcode the
number of ports in the driver itself. The counting won't work at all
if an ethernet port is marked as disabled, e.g. because it is not
connected on the board at all.
It turns out that the LAN9662 and LAN9668 use the same switching IP
with the same synthesis parameters. The only difference is that the
output ports are not connected. Thus, we can just hardcode the
number of physical ports to 8.
Fixes: db8bcaad53 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220704153654.1167886-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix deadlock when powering on.
* tag 'for-net-2022-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: core: Fix deadlock on hci_power_on_sync.
====================
Link: https://lore.kernel.org/r/20220705202700.1689796-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`cancel_work_sync(&hdev->power_on)` was moved to hci_dev_close_sync in
commit [1] to ensure that power_on work is canceled after HCI interface
down.
But, in certain cases power_on work function may call hci_dev_close_sync
itself: hci_power_on -> hci_dev_do_close -> hci_dev_close_sync ->
cancel_work_sync(&hdev->power_on), causing deadlock. In particular, this
happens when device is rfkilled on boot. To avoid deadlock, move
power_on work canceling out of hci_dev_do_close/hci_dev_close_sync.
Deadlock introduced by commit [1] was reported in [2,3] as broken
suspend. Suspend did not work because `hdev->req_lock` held as result of
`power_on` work deadlock. In fact, other BT features were not working.
It was not observed when testing [1] since it was verified without
rfkill in place.
NOTE: It is not needed to cancel power_on work from other places where
hci_dev_do_close/hci_dev_close_sync is called in case:
* Requests were serialized due to `hdev->req_workqueue`. The power_on
work is first in that workqueue.
* hci_rfkill_set_block which won't close device anyway until HCI_SETUP
is on.
* hci_sock_release which runs after hci_sock_bind which ensures
HCI_SETUP was cleared.
As result, behaviour is the same as in pre-dd06ed7 commit, except
power_on work cancel added to hci_dev_close.
[1]: commit ff7f292611 ("Bluetooth: core: Fix missing power_on work cancel on HCI close")
[2]: https://lore.kernel.org/lkml/20220614181706.26513-1-max.oss.09@gmail.com/
[2]: https://lore.kernel.org/lkml/1236061d-95dd-c3ad-a38f-2dae7aae51ef@o2.pl/
Fixes: ff7f292611 ("Bluetooth: core: Fix missing power_on work cancel on HCI close")
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reported-by: Max Krummenacher <max.krummenacher@toradex.com>
Reported-by: Mateusz Jonczyk <mat.jonczyk@o2.pl>
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
