As suggested by Vlastimil Babka [1], kfree_rcu_sheaf() can be used
on PREEMPT_RT if we always assume spinning is not allowed on PREEMPT_RT.
This is because local_trylock and spinlock_t are safe to use with
trylock and unlock as long as the kernel does not spin and the context
is not NMI and not hardirq.
Now that __kfree_rcu_sheaf() knows how to handle SLAB_FREE_NOLOCK,
relax the limitation and try the sheaves path on PREEMPT_RT as well.
Keep the lockdep map on non RT kernels. However, do not use the lockdep
map on PREEMPT_RT to avoid suppressing valid lockdep warnings.
As pointed by Vlastimil Babka [2], on PREEMPT_RT it is unnecessary to
defer call_rcu() under IRQ-disabled section or raw spinlock. However,
let us avoid adding more complexity as the scenario is not supposed
to be common on PREEMPT_RT, with a hope that call_rcu_nolock() will be
soon supported in RCU.
Link: https://lore.kernel.org/linux-mm/6811cc17-8ee4-48c8-8cbf-6bf4d9f98162@kernel.org [1]
Link: https://lore.kernel.org/linux-mm/40591888-3a87-433e-b3d2-cda1cab543be@kernel.org [2]
Suggested-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260729-kfree_rcu_nolock-v5-5-a28cdcda9673@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
__kfree_rcu_sheaf() cannot invoke call_rcu() when spinning is not
allowed and IRQs are disabled. To relax the limitation, extend the
deferred free fallback so that a full rcu sheaf can be submitted to
call_rcu() via the existing IRQ work.
Since the deferred mechanism does more than deferred freeing of objects,
rename the struct to deferred_percpu_work and adjust names accordingly.
When a sheaf is queued on an IRQ work, it is detached from
pcs->rcu_free but call_rcu() is not invoked until the irq_work runs.
To keep the kvfree_rcu barrier's promise, call irq_work_sync() on each
CPU before calling rcu_barrier().
In the meantime, remove the TODO item as apparently there is no simple
and effective way to achieve that. This is because, unlike sheaves,
kfree_rcu() batches objects from different caches together.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260729-kfree_rcu_nolock-v5-4-a28cdcda9673@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Teach kfree_rcu_sheaf() how to handle the !allow_spin case. Try to get
an empty sheaf from pcs->spare or the barn even when spinning is not
allowed. Unlike __pcs_replace_full_main(), try harder to allocate
an empty sheaf because the fallback path will be more expensive than
kfree_nolock().
Now that slab has internal alloc_flags to describe context, introduce
free_flags analogously and convert free_flags to alloc_flags when
allocating memory in the free path.
When trylock fails or the kernel observes non-NULL pcs->rcu_free after
lock acquisition, free the sheaf instead of putting it to the barn.
This is rare and not worth complicating the code.
Since call_rcu() cannot be called in an unknown context,
kfree_rcu_sheaf() fails when the rcu sheaf becomes full.
Link: https://lore.kernel.org/linux-mm/872bd673-3d45-4111-8a41-31185db3ece5@kernel.org
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260729-kfree_rcu_nolock-v5-2-a28cdcda9673@kernel.org
Reviewed-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Since kmalloc_nolock() always fails in NMI and hardirq contexts on
PREEMPT_RT, slub_kunit cannot properly test _nolock() APIs.
Register a kprobe pre-handler to invoke kmalloc_nolock() and
kfree_nolock() in the middle of the slab allocator. However, do not
register the handler on UP kernels because that use case is not
well supported [1] in the kernel.
To attach the pre-handler while s->cpu_sheaves->lock or n->list_lock
is held, add a wrapper function for lockdep_assert_held() that calls
a no-op function slab_attach_kprobe_locked() on debug builds. The
function is optimized away when neither CONFIG_PROVE_LOCKING nor
CONFIG_DEBUG_VM is selected and register_kprobe() fails.
The function calls barrier() to prevent the compiler from optimizing
away its callsites. Otherwise, the compiler may consider the function
does not have any side effect and remove callsites.
Compared to using plain kprobe, this has two advantages: 1) it avoids
hardcoding function names in the test, and 2) it can trigger those APIs
in the middle of a function, where the lock is expected to be held as
annotated with lockdep.
While it was proposed [2] to use kunit function redirection to test
this, it is currently infeasible as some lock helpers don't have
symbols.
Factor out the nested loop that calls kmalloc and friends to
test_kmalloc_kfree(), and call them in
test_kmalloc_kfree_nolock_{perf,kprobe}(), each being an independent
test case. During the refactoring, drop alloc_fail handling as it
doesn't provide much benefits.
Link: https://lore.kernel.org/linux-mm/20260427-nolock-api-fix-v2-0-a6b83a92d9a4@kernel.org [1]
Link: https://lore.kernel.org/linux-mm/6edebc2b-5f5a-4b9c-9a4c-564310acee1b@kernel.org [2]
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260729-kfree_rcu_nolock-v5-1-a28cdcda9673@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Commit 280ea9c315 ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
BUG: TASK stack guard page was hit
Oops: stack guard page
RIP: 0010:kfree+0x8/0x5d0
Call Trace:
__free_slab+0x66/0xc0
kfree+0x3f0/0x5d0
... ( ~125x __free_slab <-> kfree ) ...
<kernel driver freeing a resource>
do_syscall_64
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-kmalloc-normal caches can now have a valid tag.
Do not call mark_obj_codetag_empty() when freeing an obj_exts array to
avoid false warnings. KMALLOC_NO_OBJ_EXT don't need this as they never
allocate those arrays.
Reported-by: Danielle Costantino <dcostantino@meta.com>
Reported-by: Shakeel Butt <shakeel.butt@linux.dev>
Closes: https://lore.kernel.org/linux-mm/20260625230029.703750-1-shakeel.butt@linux.dev [1]
Fixes: 4b87369646 ("mm/slab: add allocation accounting into slab allocation and free paths")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mm/c5c4208d-a6f0-413e-bad9-49be12f12d55@kernel.org [2]
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-4-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
mem_alloc_profiling_enabled() tells whether memalloc profiling is
currently enabled. However, even when this function returns false,
it can be enabled later.
However, this is not enough. Some optimizations can be applied only when
memalloc profiling is permanently disabled. For example, to skip the
creation of KMALLOC_NO_OBJ_EXT caches at boot time, mem_profiling must
be set to "never", "0" w/ debugging on, or have been shutdown so that
it can no longer be enabled.
Introduce mem_alloc_profiling_permanently_disabled() for this purpose.
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-3-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
When kmalloc caches are aliased, multiple cache pointers reference
the same kmem_cache. As a result, iterating over kmalloc indices and
bootstrapping sheaves can bootstrap the same cache more than once and
leak memory.
Currently, this could happen when the architecture specifies
minimum alignment for slab caches that is larger than
ARCH_KMALLOC_MINALIGN.
Bootstrap sheaves only when the cache does not have them already.
Add a warning when bootstrap_cache_sheaves() is called for a cache
that already has sheaves enabled.
Fixes: 913ffd3a1b ("slab: handle kmalloc sheaves bootstrap")
Cc: stable@vger.kernel.org
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-1-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
In free_to_pcs_bulk(), when remote_objects[] fills to PCS_BATCH_MAX,
the code jumps to flush_remote to free the batch. If all remote entries
have already been compacted out of p[] via tail swaps while local objects
remain, the flush_remote path returns early since `i < size` no longer
holds. The leftover local objects are then neither cached in the sheaf
nor returned to the slab freelist, causing a memory leak.
For illustration:
size = 64, local objects at p[0..31], remote objects at p[32..63]
After scanning all remotes: i = 32, size = 32
p[0..31] local objects are dropped.
Harry pointed out that, although the logic contains a real leak, it does
not appear to be triggerable with the current in-tree users. To hit this
path, at least PCS_BATCH_MAX objects, currently hardcoded to 32, need to
be collected in remote_objects[]. Looking at current kmem_cache_free_bulk()
users:
* maple_node has sheaf_capacity = 32
* skbuff_head_cache has sheaf_capacity = 28
* panthor and msm drivers have sheaf_capacity = 4
The sheaf capacity is, at least for now, derived purely from the object
size, with the user-requested capacity used as a minimum. Therefore, among
the current users, only maple_node has a sheaf_capacity large enough to
reach PCS_BATCH_MAX.
However, for the bug to trigger in maple_node, all objects in the sheaf
would have to be from remote nodes. In that case, there would be no local
objects left to leak. So this issue was found by code review rather than
from a runtime report, and it does not seem to be triggerable by current
users.
Still, the bug could become reachable with future users, a different sheaf
capacity, or a change to PCS_BATCH_MAX. Fix the logic by freeing a full
remote batch in place during the scan and then continuing to process the
compacted array. This keeps all local objects on the normal fast path,
while the tail path only handles any leftover partial remote batch. The
redundant next_remote_batch jump label is removed as well.
Fixes: 989b09b739 ("slab: skip percpu sheaves for remote object freeing")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Link: https://patch.msgid.link/202607062139095043SOsLi6TIf403tcjPf8fm@zte.com.cn
Cc: stable@vger.kernel.org
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
Pull more input updates from Dmitry Torokhov:
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in F30
and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
* tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gscps2 - advance receive buffer write index
Input: rmi4 - tolerate short register descriptor structure
Revert "Input: rmi4 - fix register descriptor address calculation"
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
Pull pwm fixes from Uwe Kleine-König:
"Two more fixes that I managed to put into the public branch merged
into next before my first pull request but missed to include them in
it.
The first change is a relevant change that fixes misconfigurations due
to a variable overflow. The second is only cosmetic but very obviously
an improvement"
* tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: rzg2l-gpt: Add missing newlines to dev_err_probe() messages
pwm: rzg2l-gpt: Fix period_ticks type from u32 to u64
Pull more fbdev updates from Helge Deller:
"Fixes for generic fbdev & fbcon code for the handling of modelists
and preventing a potential NULL ptr dereference in the console code.
Fix missed cleanups in the error path of various fbdev drivers.
And Uwe Kleine-König contributed a cleanup patch to use named
initializers in the vga16fb driver"
* tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
fbcon: fix NULL pointer dereference for a console without vc_data
fbdev: fix use-after-free in store_modes()
fbdev: viafb: return an error when DMA copy times out
fbdev: goldfishfb: fail pan display on base-update timeout
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
fbdev: pm2fb: unwind WC setup on probe failure
fbdev: vga16fb: Drop unused assignment of platform_device_id driver data
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
Pull fscrypt fixes from Eric Biggers:
- Fix a bug where in a specific edge case, file contents en/decryption
could be done with the wrong data unit size
- Fix the data structure used for keeping track of users that have
added an fscrypt key to be a simple list instead of a 'struct key'
keyring
This fixes issues such as a lockdep report found by syzbot and
possible unintended interactions with the keyctl() system calls
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace mk_users keyring with simple list
fscrypt: Fix key setup in edge case with multiple data unit sizes
Commit 44f9200699 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f9200699 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some touchpads (e.g. ThinkPad T14 Gen 1) have buggy firmware that reports
a register descriptor structure size that is too small for the number of
registers it claims to have in the presence map. The remaining bytes in
the structure are 0, which with the new strict bounds checking causes the
parser to fail with -EIO, aborting the device probe.
Tolerate such short reads by dropping the remaining (unparseable or
0-size) registers from the list instead of failing the probe,
preventing the driver from trying to use them.
Fixes: 0adb483fbf ("Input: rmi4 - refactor register descriptor parsing")
Reported-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The register descriptor presence register is a packet register, which
means its bytes share a single RMI address. It does not occupy
consecutive addresses, and the register structure that follows it
is located at the next RMI address (presence_address + 1), not
(presence_address + presence_size).
Revert the incorrect address calculation introduced in commit
a98518e724.
Reported-by: "Barry K. Nathan" <barryn@pobox.com>
Tested-by: "Barry K. Nathan" <barryn@pobox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current list initialisation depends on the well hidden two zeros in
the PCI_VDEVICE macro. Instead use a named initialisation that is more
robust and easier to understand.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Correct a function name and function parameter name to avoid
kernel-doc warnings:
Warning: include/linux/ntb.h:575 expecting prototype for
ntb_default_port_count(). Prototype was for ntb_default_peer_port_count()
instead
Warning: include/linux/ntb.h:590 function parameter 'pidx' not
described in 'ntb_default_peer_port_number'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars.
Cc: stable@vger.kernel.org
Fixes: e75d5ae8ab ("NTB: epf: Allow more flexibility in the memory BAR map method")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
amd_ntb_link_disable() prints "Enabling Link" which is misleading.
Update the message to reflect that the link is being disabled.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Pull drm merge window fixes from Dave Airlie:
"This is the merge window fixes from our next tree, i915/xe and amdgpu
make up all of it.
I've got a separate fixes pull from our fixes branch arriving after
this.
i915:
- Fix corrupted display output on GLK, #16209
- Add missing Spectre mitigation for parallel submit IOCTL
- MTL+ fix for DP resume
- clear CRTC blobs after dropping refs
- fix sharpness filter on DP MST
xe:
- Set TTM beneficial order to 9 in Xe
- Several error path cleanups
- Fix TDR for unstarted jobs on kernel queues
- Several TLB invalidation fixes related to suspending LR queues
- Some small RAS fixes
- Multi-queue suspend fix for LR queues
- Revert inclusion of NVL_S firmware
amdgpu:
- devcoredump fixes
- SMU15 fix
- Various irq put/get imbalance cleanup fixes
- 8K panel fix
- DCN3.5 fix
- lockdep fix
- Cleaner shader sysfs IB overflow fix
- Async flip fixes
- GET_MAPPING_INFO fix
- CP_GFX_SHADOW fix
- Ctx pstate handling fix
- GTT bo move handling fixes
- Old UVD BO placement fixes
- GC9 mode2 reset fix
- IH6.1 version fix
- Soft IH ring fix
amdkfd:
- Fix doorbell/mmio double unpin on free
- CRIU fixes
- SMI event fixes
- Sysfs teardown fix
- Various boundary checking fixes
- Various error checking fixes
- SVM fix"
* tag 'drm-next-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel: (52 commits)
drm/i915/cdclk: Fix up CDCLK_FREQ_DECIMAL without a full PLL re-enable
drm/i915/gem: Add missing nospec on parallel submit slot
drm/amdgpu: Use system unbound workqueue for soft IH ring
amdgpu/ih6.1: Fix minor version
drm/amdkfd: Use exclusive bounds for SVM split alignment checks
drm/amdgpu/gfx9: Fix Ring and IB test fail after mode2
drm/amdgpu/uvd: Fix forcing MSG, FB BOs into VCPU segment when it isn't at 0 (v2)
drm/amdgpu/uvd: Place VCPU BO only in VRAM for UVD 4.x and older
drm/amdgpu: Fix amdgpu_bo_move() when old_mem and new_mem are both GTT
drm/amdgpu: Respect placement requirements in amdgpu_gtt_mgr functions
drm/amdgpu: Fix context pstate override handling
drm/amdkfd: Use memdup_array_user to copy data from/to user space at kfd ioctls
drm/amdkfd: check find_first_zero_bit before __set_bit on kfd->doorbell_bitmap
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format
drm/amdgpu: convert amdgpu_vm_lock_by_pasid() to drm_exec
drm/amdgpu: Don't use UTS_RELEASE directly
drm/amdkfd: Fix NULL deref during sysfs teardown
drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1
drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO
...
Pull ceph updates from Ilya Dryomov:
"This adds support for manual client session reset in CephFS, allowing
operators to get out of tricky livelock situations involving caps and
file locks without evicting the problematic client instance on the MDS
side or rebooting the client node both of which can be disruptive"
* tag 'ceph-for-7.2-rc1' of https://github.com/ceph/ceph-client:
ceph: add manual reset debugfs control and tracepoints
ceph: add client reset state machine and session teardown
ceph: add diagnostic timeout loop to wait_caps_flush()
ceph: harden send_mds_reconnect and handle active-MDS peer reset
ceph: use proper endian conversion for flock_len in reconnect
ceph: convert inode flags to named bit positions and atomic bitops
rbd: switch to dynamic root device
Pull thermal control fixes from Rafael Wysocki:
"These fix a failure path in an Intel thermal driver and prevent
thermal testing module code from being executed after it has been
freed:
- Fix dangling resources on thermal_throttle_online() failure in the
Intel thermal_throttle driver (Ricardo Neri)
- Eliminate a possibility of running thermal testing module code
after that module has been removed (Rafael Wysocki)"
* tag 'thermal-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: testing: zone: Flush work items during cleanup
thermal: intel: Fix dangling resources on thermal_throttle_online() failure
Pull power management fixes from Rafael Wysocki:
"These fix the schedutil cpufreq governor and drop a bogus warning
from the cpuidle core:
- Remove a misguided warning along with an inaccurate comment
next to it from the cpuidle core (Rafael Wysocki)
- Clear need_freq_update as appropriate in the .adjust_perf()
path of the schedutil cpufreq governor to avoid calling
cpufreq_driver_adjust_perf() unnecessarily on every scheduler
utilization update (Zhongqiu Han)"
* tag 'pm-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Allow exit latency to exceed target residency
cpufreq: schedutil: Fix uncleared need_freq_update on the .adjust_perf() path
Pull ACPI support fixes and cleanups from Rafael Wysocki:
"These fix assorted issues and do cleanups in the ACPI support code,
which includes a fix for tools build breakage related to strncpy()
removal:
- Unbreak ACPICA tools builds after switching over to using
strscpy_pad() that is kernel-specific (Rafael Wysocki)
- Fix module parameter file paths in comments in the ACPI code
managing the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() that may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle annotation to idle state management functions related
to ACPI _LPI to avoid trace-induced RCU warnings (Li RongQing)"
* tag 'acpi-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
ACPICA: Unbreak tools build after switching over to strscpy_pad()
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
ACPI: resource: Amend kernel-doc style
ACPI: sysfs: Fix path of module parameters in comments
Pull spi fixes from Mark Brown:
"A fairly unremarkable collection of fixes that came in over the
merge window, plus a new device ID for the DesignWare controller
in the StarFive JHB100 SoC.
There's a couple of core fixes included, one avoiding freeing an
empty resource in error handling cases and another which fixes a
NULL dereference which could be triggered by using an abnormal
device registration flow like driver_override"
* tag 'spi-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: reconfigure for PIO when DMA cannot be started
spi: dw: Add support for snps,dwc-ssi-2.00a
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
spi: rpc-if: Use correct device for hardware reinitialization on resume
spi: acpi: Free resource list at appropriate time
spi: dw: fix wrong BAUDR setting after resume
spi: uniphier: Fix completion initialization order before devm_request_irq()
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Pull regulator fixes from Mark Brown:
"A couple of unremarkable driver specific fixes that came in during the
merge window"
* tag 'regulator-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9121: Use subvariant ids in the I2C table
regulator: pca9450: Correct default t_off_deb for PCA9451A/PCA9452
Pull regmap fix from Mark Brown:
"Ensure that we don't overwrite the error code when cleaning up a
failed cache initialisation, helping people debug issues if they
do arise"
* tag 'regmap-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regcache: Do not overwrite error code when finalizing cache after error
Merge a fix eliminating a possibility of running the thermal testing
module code after that module has been removed.
* thermal-testing:
thermal: testing: zone: Flush work items during cleanup
Merge a cpuidle core fix that removes a misguided warning along with an
inaccurate comment next to it.
* pm-cpuidle:
cpuidle: Allow exit latency to exceed target residency
Merge an update of comments regarding the ACPI sysfs code, a kernel-doc
style fixup update of ACPI resource management, and ACPI IPMI driver
fix, and an ACPI processor driver fix for 7.2-rc1:
- Fix module parameter file paths in comments in the ACPI code managing
the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() which may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle to idle state management functions related to ACPI _LPI
to avoid trace-induced RCU warnings (Li RongQing)
* acpi-sysfs:
ACPI: sysfs: Fix path of module parameters in comments
* acpi-resource:
ACPI: resource: Amend kernel-doc style
* acpi-driver:
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
* acpi-processor:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
Pull devicetree fixes from Rob Herring:
- Drop unnecessary type reference from khadas,mcu "fan-supply"
- Fix clocks in Renesas R-Mobile APE6 example
- Add missing Unisoc SC2730 PMIC regulators schema
- Fix Amlogic thermal example
- kernel-doc fix for of_map_id()
- Handle negative index in of_fwnode_get_reference_args()
* tag 'devicetree-fixes-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mfd: khadas,mcu: Drop type reference from "fan-supply"
dt-bindings: clock: renesas: div6: Use ZT/ZTR trace clock in R-Mobile APE6 example
regulator: dt-bindings: Add Unisoc SC2730 PMIC
dt-bindings: thermal: amlogic: Correct 'reg' in the example
dt-bindings: thermal: amlogic: Fix missing header in the example
of: Fix RST inline emphasis warnings in of_map_id() kernel-doc
of: property: Fix of_fwnode_get_reference_args() with negative index
Pull LoongArch updates from Huacai Chen:
- Add THREAD_INFO_IN_TASK implementation
- Add build salt to the vDSO
- Add some BPF JIT inline helpers
- Update DTS for I2C clocks and clock-frequency
- Some bug fixes and other small changes
* tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Test jited inline of bpf_get_smp_processor_id() for LoongArch
selftests/bpf: Test jited inline of bpf_get_current_task() for LoongArch
selftests/bpf: Add __arch_loongarch to limit test cases for LoongArch
selftests/bpf: Add get_preempt_count() support for LoongArch
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K2000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K1000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K0500
LoongArch: BPF: Inline bpf_get_smp_processor_id() helper
LoongArch: BPF: Inline bpf_get_current_task/_btf() helpers
LoongArch: BPF: Fix off-by-one error in tail call
LoongArch: BPF: Fix outdated tail call comments
LoongArch: Add build salt to the vDSO
LoongArch: Fix nr passing in set_direct_map_valid_noflush()
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
LoongArch: Move struct kimage forward declaration before use
LoongArch: Report dying CPU to RCU in stop_this_cpu()
LoongArch: Add PIO for early access before ACPI PCI root register
LoongArch: Add THREAD_INFO_IN_TASK implementation
Pull arm64 fixes from Will Deacon:
"Small crop of arm64 fixes for -rc1. We've got a build fix for a new
randconfig permutation, a fix for a long-standing truncation issue
with hardware watchpoints and a KVM initialisation fix for the newly
merged remapping of the kernel data and bss sections:
- Fix randconfig build failure due to missing include of asm/insn.h
- Reject unaligned hardware watchpoints which were silently being
truncated
- Fix crash in KVM initialisation by deferring the read-only
remapping of the kernel data and bss sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Defer read-only remap of data/bss linear alias
arm64/hw_breakpoint: reject unaligned watchpoints that would truncate BAS
arm64: static_call: include asm/insns.h
Pull ecryptfs updates from Tyler Hicks:
"No functional changes, just code cleanups:
- replace kmalloc()/snprintf() with kasprintf()
- simplify code flow by removing an unnecessary variable"
* tag 'ecryptfs-7.2-rc1-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: use kasprintf in ecryptfs_crypto_api_algify_cipher_name
ecryptfs: remove redundant variable found_auth_tok
Pull smb server updates from Steve French:
"This is mostly a correctness and compatibility update for ksmbd's
SMB2/3 lease, oplock, durable handle, compound request, CREATE,
rename, stream and share-mode handling.
A large part of the series fixes cases found by smbtorture where ksmbd
diverged from the SMB2/3 protocol requirements.
The main changes are:
- Rework SMB2 lease state handling so lease state is shared per
ClientGuid/LeaseKey across opens, with better validation of lease
create contexts, ACK handling, epochs, break-in-progress reporting,
v2 lease notification routing, and chained lease breaks
- Fix several oplock break corner cases, including ACK validation,
timeout downgrade behavior, level-II break handling on unlink,
share-conflict lease breaks, and read-control/stat-open behavior
- Fix durable handle behavior around delete-on-close, stale
reconnects, reconnect context parsing, oplock/lease break
invalidation, and durable v2 AppInstanceId replacement
- Fix compound request handling so related commands propagate failed
statuses correctly, preserve response framing across chained
errors, keep compound FIDs across READ/WRITE/FLUSH, and send
interim STATUS_PENDING where clients expect cancellable compound
I/O
- Tighten CREATE and stream semantics, including create attribute
validation, allocation size reporting, explicit create security
descriptors, unnamed DATA stream handling, stream directory
validation, and stream delete sharing against the base file
- Fix rename and metadata behavior, including parent directory
sharing checks, denying directory rename with open children, and
preserving SMB ChangeTime across rename for open handles
- Fix two important safety issues: a multichannel byte-range lock
list owner race that could lead to use-after-free, and an NTLMv2
session key update before authentication proof validation
- Fix a concurrent SMB2 NEGOTIATE preauth use-after-free, a UBSAN
warning in compression capability parsing, a false hung-task
warning in the durable handle scavenger, endian debug logging,
Smatch indentation warnings, and kernel-doc warnings
- Increase the default SMB3 transaction size from 1MB to 4MB to
better match modern read/write negotiation and improve sequential
I/O behavior"
* tag 'v7.2-rc-part2-smb3-server-fixes' of git://git.samba.org/ksmbd: (50 commits)
ksmbd: fix kernel-doc warnings in smb2_lease_break_noti()
ksmbd: fix inconsistent indenting warnings
ksmbd: validate NTLMv2 response before updating session key
ksmbd: increase SMB3_DEFAULT_TRANS_SIZE from 1MB to 4MB
ksmbd: fix UBSAN array-index-out-of-bounds in decode_compress_ctxt()
ksmbd: sleep interruptibly in the durable handle scavenger
ksmbd: start file id allocation at 1
ksmbd: treat read-control opens as stat opens only for leases
ksmbd: validate :: stream type against directory create
ksmbd: break conflicting-open leases only as far as needed
ksmbd: break handle caching for share conflicts
ksmbd: normalize ungrantable lease states
ksmbd: return oplock protocol error for level II ack
ksmbd: avoid level II oplock break notification on unlink
ksmbd: downgrade oplock after break timeout
ksmbd: apply create security descriptor first
ksmbd: return requested create allocation size
ksmbd: tighten create file attribute validation
ksmbd: reject empty-attribute synchronize-only create
ksmbd: honor stream delete sharing for base file
...
info->var, a framebuffer's current mode, is expected to have a matching
entry in info->modelist. var_to_display() relies on this and treats a
failed fb_match_mode() as "This should not happen". fb_set_var() keeps it
true by adding the mode to the list on every change, and
do_register_framebuffer() does the same at registration.
store_modes() replaces the modelist from userspace. fb_new_modelist()
validates the new modes but does not check that info->var still has a
match. It relies on fbcon_new_modelist() to re-point consoles, but that
only handles consoles mapped to the framebuffer. With fbcon unbound there
are none, so info->var is left describing a mode that is no longer in the
list.
A later console takeover runs var_to_display(), where fb_match_mode()
returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it
to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode.
Keep the current mode in the list in fb_new_modelist(), the same way
fb_set_var() does.
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.
Keep fb_display[i].mode set only while the console has a vc_data. Check
vc_data before setting the mode in fbcon_set_disp(), and clear the mode in
fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips
such consoles.
Reported-by: syzbot+42525d636f430fd5d983@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42525d636f430fd5d983
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
store_modes() replaces a framebuffer's modelist with modes from userspace.
On success it frees the old modelist with fb_destroy_modelist(). Two
fields still point into that freed list.
One pointer is fb_display[i].mode, the mode a console is using.
fbcon_new_modelist() moves these pointers to the new list. It only does so
for consoles still mapped to the framebuffer. An unmapped console is
skipped and keeps its stale pointer. Unbinding fbcon, for example, sets
con2fb_map[i] to -1 but leaves fb_display[i].mode set. An
FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches
fbcon_mode_deleted(). That function reads the stale fb_display[i].mode
through fb_mode_is_equal(). The read is a use-after-free.
The other pointer is fb_info->mode, the current mode. It is set through
the mode sysfs attribute. store_modes() does not update fb_info->mode, so
it is left pointing into the freed list. show_mode(), the attribute's read
handler, dereferences the stale fb_info->mode through mode_string(). The
read is a use-after-free.
Clear both pointers before freeing the list. Commit a1f3058930 ("fbcon:
Set fb_display[i]->mode to NULL when the mode is released") added the
helper fbcon_delete_modelist(). It clears every fb_display[i].mode that
points into a given list. So far it is called only from the unregister
path. Call it from store_modes() too, and set fb_info->mode to NULL.
Reported-by: syzbot+81c7c6b52649fd07299d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=81c7c6b52649fd07299d
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ajjoDhAi2y4ArSlz@dev/
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Ian Bridges <icb@fastmail.org>
Signed-off-by: Helge Deller <deller@gmx.de>
A malformed USB device can provide a vendor-specific interface without
any endpoint descriptors. fcp_find_fc_interface() currently selects the
first vendor-specific interface and reads endpoint 0 from it, without
checking whether the interface actually has any endpoints.
When bNumEndpoints is zero, no endpoint array is allocated for the parsed
alternate setting, so get_endpoint(..., 0) yields an invalid endpoint
descriptor pointer. Dereferencing it through usb_endpoint_num() then
triggers a NULL pointer dereference.
Skip vendor-specific interfaces that do not have any endpoints.
Fixes: 46757a3e7d ("ALSA: FCP: Add Focusrite Control Protocol driver")
Reported-by: Jiaming Zhang <r772577952@gmail.com>
Closes: https://lore.kernel.org/lkml/CANypQFb1EHj0xX8bA1WxSOSK-5xca6ZNKzOQcp12=s=puY7VFw@mail.gmail.com/
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Link: https://patch.msgid.link/20260625134933.425785-1-r772577952@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The laptop has a microphone mute LED on the F4 key, but it was not
taken in mind when the previous quirk was added
in commit 00e44a68ef ("ALSA:
hda/realtek: Add quirk for Acer Nitro ANV15-41").
Replace ALC2XX_FIXUP_HEADSET_MIC with ALC245_FIXUP_ACER_MICMUTE_LED,
which enables the LED and chains the previous quirk for the headset
microphone.
Fixes: 00e44a68ef ("ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41")
Signed-off-by: Oleg Kucheryavenko <oleg.kucheryavenko2018@gmail.com>
Link: https://patch.msgid.link/20260625134955.27465-1-oleg.kucheryavenko2018@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
