Add a test trying to induce a GRO context timeout followed
by another sequence of packets for the same flow. The second
burst arrives 100ms after the first one so any implementation
(SW or HW) must time out waiting at that point. We expect both
bursts to be aggregated successfully but separately.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor CXL core/region code to make region code more manageable by
splitting out DAX and PMEM code from RAM handling code.
cxl/core: use cleanup.h for devm_cxl_add_dax_region
cxl/core/region: move dax region device logic into region_dax.c
cxl/core/region: move pmem region driver logic into region_pmem.c
The series addresses conflicts between HMEM and CXL when handling Soft
Reserved memory ranges. CXL will try best effort in claiming the Soft
Reserved memory region that are CXL regions. If fails, it will punt
back to HMEM.
tools/testing/cxl: Test dax_hmem takeover of CXL regions
tools/testing/cxl: Simulate auto-assembly failure
dax/hmem: Parent dax_hmem devices
dax/hmem: Fix singleton confusion between dax_hmem_work and hmem devices
dax/hmem: Reduce visibility of dax_cxl coordination symbols
cxl/region: Constify cxl_region_resource_contains()
cxl/region: Limit visibility of cxl_region_contains_resource()
dax/cxl: Fix HMEM dependencies
cxl/region: Fix use-after-free from auto assembly failure
dax/hmem, cxl: Defer and resolve Soft Reserved ownership
cxl/region: Add helper to check Soft Reserved containment by CXL regions
dax: Track all dax_region allocations under a global resource tree
dax/cxl, hmem: Initialize hmem early and defer dax_cxl binding
dax/hmem: Gate Soft Reserved deferral on DEV_DAX_CXL
dax/hmem: Request cxl_acpi and cxl_pci before walking Soft Reserved ranges
dax/hmem: Factor HMEM registration into __hmem_register_device()
dax/bus: Use dax_region_put() in alloc_dax_region() error path
Prep patches for CXL type2 accelerator basic support
cxl/region: Factor out interleave granularity setup
cxl/region: Factor out interleave ways setup
cxl: Make region type based on endpoint type
cxl/pci: Remove redundant cxl_pci_find_port() call
cxl: Move pci generic code from cxl_pci to core/cxl_pci
cxl: export internal structs for external Type2 drivers
cxl: support Type2 when initializing cxl_dev_state
The cxl_test module currently hard-codes auto regions in the mock
topology, limiting coverage of the driver's region auto-assembly
logic.
Teach cxl_test to replay previously committed decoder programming
across a cxl_acpi unbind/bind cycle. Decoder programming is recorded
in a registry keyed by a stable port identity and decoder id. The
registry is updated on decoder commit and reset events and consulted
during enumeration to restore previously enabled decoders.
This allows regions created through the user interface to be replayed
during enumeration and treated as auto-discovered regions, enabling
testing of region auto-assembly using configurations created in the
cxl_test topology.
Example workflow:
# cxl create-region ...
# echo 1 > /sys/bus/platform/devices/cxl_acpi.0/decoder_reset_preserve_registry
# echo cxl_acpi.0 > /sys/bus/platform/drivers/cxl_acpi/unbind
# echo cxl_acpi.0 > /sys/bus/platform/drivers/cxl_acpi/bind
# echo 0 > /sys/bus/platform/devices/cxl_acpi.0/decoder_reset_preserve_registry
The NDCTL CXL unit test, cxl-region-replay.sh, demonstrates the usage.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Co-developed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260314061952.2221030-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Drop the explicit KVM_SEV_LAUNCH_UPDATE_VMSA call when creating an SEV-ES
VM in the SEV migration test, as sev_vm_create() automatically updates the
VMSA pages for SEV-ES guests. The only reason the duplicate call doesn't
cause visible problems is because the test doesn't actually try to run the
vCPUs. That will change when KVM adds a check to prevent userspace from
re-launching a VMSA (which corrupts the VMSA page due to KVM writing
encrypted private memory).
Fixes: 69f8e15ab6 ("KVM: selftests: Use the SEV library APIs in the intra-host migration test")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260310234829.2608037-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add two passes before the main verifier pass:
bpf_compute_const_regs() is a forward dataflow analysis that tracks
register values in R0-R9 across the program using fixed-point
iteration in reverse postorder. Each register is tracked with
a six-state lattice:
UNVISITED -> CONST(val) / MAP_PTR(map_index) /
MAP_VALUE(map_index, offset) / SUBPROG(num) -> UNKNOWN
At merge points, if two paths produce the same state and value for
a register, it stays; otherwise it becomes UNKNOWN.
The analysis handles:
- MOV, ADD, SUB, AND with immediate or register operands
- LD_IMM64 for plain constants, map FDs, map values, and subprogs
- LDX from read-only maps: constant-folds the load by reading the
map value directly via bpf_map_direct_read()
Results that fit in 32 bits are stored per-instruction in
insn_aux_data and bitmasks.
bpf_prune_dead_branches() uses the computed constants to evaluate
conditional branches. When both operands of a conditional jump are
known constants, the branch outcome is determined statically and the
instruction is rewritten to an unconditional jump.
The CFG postorder is then recomputed to reflect new control flow.
This eliminates dead edges so that subsequent liveness analysis
doesn't propagate through dead code.
Also add runtime sanity check to validate that precomputed
constants match the verifier's tracked state.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-5-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add few tests for topo sort:
- linear chain: main -> A -> B
- diamond: main -> A, main -> B, A -> C, B -> C
- mixed global/static: main -> global -> static leaf
- shared callee: main -> leaf, main -> global -> leaf
- duplicate calls: main calls same subprog twice
- no calls: single subprog
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-4-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a pass that sorts subprogs in topological order so that iterating
subprog_topo_order[] walks leaf subprogs first, then their callers.
This is computed as a DFS post-order traversal of the CFG.
The pass runs after check_cfg() to ensure the CFG has been validated
before traversing and after postorder has been computed to avoid
walking dead code.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-3-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix register equivalence for pointers to packet (Alexei Starovoitov)
- Fix incorrect pruning due to atomic fetch precision tracking (Daniel
Borkmann)
- Fix grace period wait for bpf_link-ed tracepoints (Kumar Kartikeya
Dwivedi)
- Fix use-after-free of sockmap's sk->sk_socket (Kuniyuki Iwashima)
- Reject direct access to nullable PTR_TO_BUF pointers (Qi Tang)
- Reject sleepable kprobe_multi programs at attach time (Varun R
Mallya)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add more precision tracking tests for atomics
bpf: Fix incorrect pruning due to atomic fetch precision tracking
bpf: Reject sleepable kprobe_multi programs at attach time
bpf: reject direct access to nullable PTR_TO_BUF pointers
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
bpf: Fix grace period wait for tracepoint bpf_link
bpf: Fix regsafe() for pointers to packet
With the changes to the verifier in previous commits, we're not
expecting any invariant violations anymore. We should therefore always
enable BPF_F_TEST_REG_INVARIANTS to fail on invariant violations. Turns
out that's already the case and we've been explicitly setting this flag
in selftests when it wasn't necessary. This commit removes those flags
from selftests, which should hopefully make clearer that it's always
enabled.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/9afce92510a7d44569dc3af63c9b8c608e69298a.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a selftest for the change in the previous patch. The
selftest is derived from a syzbot reproducer from [1] (among the 22
reproducers on that page, only 4 still reproduced on latest bpf tree,
all being small variants of the same invariant violation).
The test case failure without the previous patch is shown below.
0: R1=ctx() R10=fp0
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (bf) r5 = r0 ; R0=scalar(id=1) R5=scalar(id=1)
2: (57) r5 &= -4 ; R5=scalar(smax=0x7ffffffffffffffc,umax=0xfffffffffffffffc,smax32=0x7ffffffc,umax32=0xfffffffc,var_off=(0x0; 0xfffffffffffffffc))
3: (bf) r7 = r0 ; R0=scalar(id=1) R7=scalar(id=1)
4: (57) r7 &= 1 ; R7=scalar(smin=smin32=0,smax=umax=smax32=umax32=1,var_off=(0x0; 0x1))
5: (07) r7 += -43 ; R7=scalar(smin=smin32=-43,smax=smax32=-42,umin=0xffffffffffffffd5,umax=0xffffffffffffffd6,umin32=0xffffffd5,umax32=0xffffffd6,var_off=(0xffffffffffffffd4; 0x3))
6: (5e) if w5 != w7 goto pc+1
verifier bug: REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0xffffffd5, 0xffffffffffffffd4] s64=[0x80000000ffffffd5, 0x7fffffffffffffd4] u32=[0xffffffd5, 0xffffffd4] s32=[0xffffffd5, 0xffffffd4] var_off=(0xffffffd4, 0xffffffff00000000)
R5 and R7 are prepared such that their tnums intersection results in a
known constant but that constant isn't within R7's u32 bounds.
is_branch_taken isn't able to detect this case today, so the verifier
walks the impossible fallthrough branch. After regs_refine_cond_op and
reg_bounds_sync refine R5 on the assumption that the branch is taken,
the impossibility becomes apparent and results in an invariant violation
for R5: umin32 is greater than umax32.
The previous patch fixes this by using regs_refine_cond_op and
reg_bounds_sync in is_branch_taken to detect the impossible branch. The
fallthrough branch is therefore correctly detected as dead code.
Link: https://syzkaller.appspot.com/bug?extid=c950cc277150935cc0b5 [1]
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/b1e22233a3206ead522f02eda27b9c5c991a0de9.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If TLD_FREE_DATA_ON_THREAD_EXIT is not enabled in a translation unit
that calls __tld_create_key() first, another translation unit that
enables it will not get the auto cleanup feature as pthread key is only
created once when allocation metadata. Fix it by always try to create
the pthread key when __tld_create_key() is called.
Also improve the documentation:
- Discourage user from using different options in different translation
units
- Specify calling tld_free() before thread exit as undefined behavior
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260331213555.1993883-6-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Without specifying constructor priority of the hidden constructor
function defined by TLD_DEFINE_KEY, __tld_create_key(..., dyn_data =
false) may run after tld_get_data() called from other constructors.
Threads calling tld_get_data() before __tld_create_key(..., dyn_data
= false) will not allocate enough memory for all TLDs and later result
in OOB access. Therefore, set it to the lowest value available to
users. Note that lower means higher priority and 0-100 is reserved to
the compiler.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://lore.kernel.org/r/20260331213555.1993883-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Simplify data allocation by always using aligned_alloc() and passing
size_pot, size rounded up to the closest power of two to alignment.
Currently, aligned_alloc(page_size, size) is only intended to be used
with memory allocators that can fulfill the request without rounding
size up to page_size to conserve memory. This is enabled by defining
TLD_DATA_USE_ALIGNED_ALLOC. The reason to align to page_size is due to
the limitation of UPTR where only a page can be pinned to the kernel.
Otherwise, malloc(size * 2) is used to allocate memory for data.
However, we don't need to call aligned_alloc(page_size, size) to get
a contiguous memory of size bytes within a page. aligned_alloc(size_pot,
...) will also do the trick. Therefore, just use aligned_alloc(size_pot,
...) universally.
As for the size argument, create a new option,
TLD_DONT_ROUND_UP_DATA_SIZE, to specify not rounding up the size.
This preserves the current TLD_DATA_USE_ALIGNED_ALLOC behavior, allowing
memory allocators with low overhead aligned_alloc() to not waste memory.
To enable this, users need to make sure it is not an undefined behavior
for the memory allocator to have size not being an integral multiple of
alignment.
Compared to the current implementation, !TLD_DATA_USE_ALIGNED_ALLOC
used to always waste size-byte of memory due to malloc(size * 2).
Now the worst case becomes size - 1 and the best case is 0 when the size
is already a power of two.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260331213555.1993883-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when allocating memory for data, size of tld_data_u->start
is not taken into account. This may cause OOB access. Fixed it by adding
the non-flexible array part of tld_data_u.
Besides, explicitly align tld_data_u->data to 8 bytes in case some
fields are added before data in the future. It could break the
assumption that every data field is 8 byte aligned and
sizeof(tld_data_u) will no longer be equal to
offsetof(struct tld_data_u, data), which we use interchangeably.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://lore.kernel.org/r/20260331213555.1993883-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, attach_probe covers manual single-kprobe attaches by
func_name, but not the raw-address form that the PMU-based
single-kprobe path can accept.
This commit adds PERF and LINK raw-address coverage. It resolves
SYS_NANOSLEEP_KPROBE_NAME through kallsyms, passes the absolute address
in bpf_kprobe_opts.offset with func_name = NULL, and verifies that
kprobe and kretprobe are still triggered. It also verifies that LEGACY
rejects the same form.
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260401143116.185049-4-hoyeon.lee@suse.com
Add verifier precision tracking tests for BPF atomic fetch operations.
Validate that backtrack_insn correctly propagates precision from the
fetch dst_reg to the stack slot for {fetch_add,xchg,cmpxchg} atomics.
For the first two src_reg gets the old memory value, and for the last
one r0. The fetched register is used for pointer arithmetic to trigger
backtracking. Also add coverage for fetch_{or,and,xor} flavors which
exercises the bitwise atomic fetch variants going through the same
insn->imm & BPF_FETCH check but with different imm values.
Add dual-precision regression tests for fetch_add and cmpxchg where
both the fetched value and a reread of the same stack slot are tracked
for precision. After the atomic operation, the stack slot is STACK_MISC,
so the ldx does not set INSN_F_STACK_ACCESS. These tests verify that
stack precision propagates solely through the atomic fetch's load side.
Add map-based tests for fetch_add and cmpxchg which validate that non-
stack atomic fetch completes precision tracking without falling back
to mark_all_scalars_precise. Lastly, add 32-bit variants for {fetch_add,
cmpxchg} on map values to cover the second valid atomic operand size.
# LDLIBS=-static PKG_CONFIG='pkg-config --static' ./vmtest.sh -- ./test_progs -t verifier_precision
[...]
+ /etc/rcS.d/S50-startup
./test_progs -t verifier_precision
[ 1.697105] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.700220] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.777043] tsc: Refined TSC clocksource calibration: 3407.986 MHz
[ 1.777619] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc6d7268, max_idle_ns: 440795260133 ns
[ 1.778658] clocksource: Switched to clocksource tsc
#633/1 verifier_precision/bpf_neg:OK
#633/2 verifier_precision/bpf_end_to_le:OK
#633/3 verifier_precision/bpf_end_to_be:OK
#633/4 verifier_precision/bpf_end_bswap:OK
#633/5 verifier_precision/bpf_load_acquire:OK
#633/6 verifier_precision/bpf_store_release:OK
#633/7 verifier_precision/state_loop_first_last_equal:OK
#633/8 verifier_precision/bpf_cond_op_r10:OK
#633/9 verifier_precision/bpf_cond_op_not_r10:OK
#633/10 verifier_precision/bpf_atomic_fetch_add_precision:OK
#633/11 verifier_precision/bpf_atomic_xchg_precision:OK
#633/12 verifier_precision/bpf_atomic_fetch_or_precision:OK
#633/13 verifier_precision/bpf_atomic_fetch_and_precision:OK
#633/14 verifier_precision/bpf_atomic_fetch_xor_precision:OK
#633/15 verifier_precision/bpf_atomic_cmpxchg_precision:OK
#633/16 verifier_precision/bpf_atomic_fetch_add_dual_precision:OK
#633/17 verifier_precision/bpf_atomic_cmpxchg_dual_precision:OK
#633/18 verifier_precision/bpf_atomic_fetch_add_map_precision:OK
#633/19 verifier_precision/bpf_atomic_cmpxchg_map_precision:OK
#633/20 verifier_precision/bpf_atomic_fetch_add_32bit_precision:OK
#633/21 verifier_precision/bpf_atomic_cmpxchg_32bit_precision:OK
#633/22 verifier_precision/bpf_neg_2:OK
#633/23 verifier_precision/bpf_neg_3:OK
#633/24 verifier_precision/bpf_neg_4:OK
#633/25 verifier_precision/bpf_neg_5:OK
#633 verifier_precision:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260331222020.401848-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from Jakub Kicinski:
"With fixes from wireless, bluetooth and netfilter included we're back
to each PR carrying 30%+ more fixes than in previous era.
The good news is that so far none of the "extra" fixes are themselves
causing real regressions. Not sure how much comfort that is.
Current release - fix to a fix:
- netdevsim: fix build if SKB_EXTENSIONS=n
- eth: stmmac: skip VLAN restore when VLAN hash ops are missing
Previous releases - regressions:
- wifi: iwlwifi: mvm: don't send a 6E related command when
not supported
Previous releases - always broken:
- some info leak fixes
- add missing clearing of skb->cb[] on ICMP paths from tunnels
- ipv6:
- flowlabel: defer exclusive option free until RCU teardown
- avoid overflows in ip6_datagram_send_ctl()
- mpls: add seqcount to protect platform_labels from OOB access
- bridge: improve safety of parsing ND options
- bluetooth: fix leaks, overflows and races in hci_sync
- netfilter: add more input validation, some to address bugs directly
some to prevent exploits from cooking up broken configurations
- wifi:
- ath: avoid poor performance due to stopping the wrong
aggregation session
- virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
- eth:
- fec: fix the PTP periodic output sysfs interface
- enetc: safely reinitialize TX BD ring when it has unsent frames"
* tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
eth: fbnic: Increase FBNIC_QUEUE_SIZE_MIN to 64
ipv6: avoid overflows in ip6_datagram_send_ctl()
net: hsr: fix VLAN add unwind on slave errors
net: hsr: serialize seq_blocks merge across nodes
vsock: initialize child_ns_mode_locked in vsock_net_init()
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
net/x25: Fix overflow when accumulating packets
net/x25: Fix potential double free of skb
bnxt_en: Restore default stat ctxs for ULP when resource is available
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
bnxt_en: Refactor some basic ring setup and adjustment logic
net/mlx5: Fix switchdev mode rollback in case of failure
net/mlx5: Avoid "No data available" when FW version queries fail
net/mlx5: lag: Check for LAG device before creating debugfs
net: macb: properly unregister fixed rate clocks
net: macb: fix clk handling on PCI glue driver removal
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
net/sched: sch_netem: fix out-of-bounds access in packet corruption
...
Add a test to verify the issue: kprobe_write_ctx can be abused to modify
struct pt_regs of kernel functions via kprobe_write_ctx=true freplace
progs.
Without the fix, the issue is verified:
kprobe_write_ctx=true freplace prog is allowed to attach to
kprobe_write_ctx=false kprobe prog. Then, the first arg of
bpf_fentry_test1 will be set as 0, and bpf_prog_test_run_opts() gets
-EFAULT instead of 0.
With the fix, the issue is rejected at attach time.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260331145353.87606-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The hotplug testing only tries reading a trace remote buffer, loaded
before a CPU is offline. Extend this testing to cover:
* A trace remote buffer loaded after a CPU is offline.
* A trace remote buffer loaded before a CPU is online.
Because of these added test cases, move the hotplug testing into a
separate hotplug.tc file.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260401045100.3394299-3-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Regression tests for the shared-block NULL derefs fixed in the previous
two patches:
- fw: attempt to attach an empty fw filter to a shared block and
verify the configuration is rejected with EINVAL.
- flow: create a flow filter on a shared block without a baseclass
and verify the configuration is rejected with EINVAL.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260331050217.504278-3-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new selftest - ethtool_std_stats.sh - which validates the
eth-ctrl, eth-mac and pause standard statistics exported by an
interface. Collision related eth-mac counters as well as the error ones
will be checked against zero since that is the most likely correct
scenario.
The central part of this patch is the traffic_test() function which
gathers the 'before' counter values, sends a batch of traffic and then
interrogates again the same counters in order to determine if the delta
is on target. The function receives an array through which the caller
can request what counters to be interrogated and, for each of them, what
is their target delta value.
The output from this selftest looks as follows on a LX2160ARDB board:
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: ethtool_std_stats.sh
# TAP version 13
# 1..26
# ok 1 ethtool_std_stats.eth-ctrl-MACControlFramesTransmitted
# ok 2 ethtool_std_stats.eth-ctrl-MACControlFramesReceived
# ok 3 ethtool_std_stats.eth-mac-FrameCheckSequenceErrors
# ok 4 ethtool_std_stats.eth-mac-AlignmentErrors
# ok 5 ethtool_std_stats.eth-mac-FramesLostDueToIntMACXmitError
# ok 6 ethtool_std_stats.eth-mac-CarrierSenseErrors # SKIP
# ok 7 ethtool_std_stats.eth-mac-FramesLostDueToIntMACRcvError
# ok 8 ethtool_std_stats.eth-mac-InRangeLengthErrors # SKIP
# ok 9 ethtool_std_stats.eth-mac-OutOfRangeLengthField # SKIP
# ok 10 ethtool_std_stats.eth-mac-FrameTooLongErrors # SKIP
# ok 11 ethtool_std_stats.eth-mac-FramesAbortedDueToXSColls # SKIP
# ok 12 ethtool_std_stats.eth-mac-SingleCollisionFrames # SKIP
# ok 13 ethtool_std_stats.eth-mac-MultipleCollisionFrames # SKIP
# ok 14 ethtool_std_stats.eth-mac-FramesWithDeferredXmissions # SKIP
# ok 15 ethtool_std_stats.eth-mac-LateCollisions # SKIP
# ok 16 ethtool_std_stats.eth-mac-FramesWithExcessiveDeferral # SKIP
# ok 17 ethtool_std_stats.eth-mac-BroadcastFramesXmittedOK
# ok 18 ethtool_std_stats.eth-mac-OctetsTransmittedOK
# ok 19 ethtool_std_stats.eth-mac-BroadcastFramesReceivedOK
# ok 20 ethtool_std_stats.eth-mac-OctetsReceivedOK
# ok 21 ethtool_std_stats.eth-mac-FramesTransmittedOK
# ok 22 ethtool_std_stats.eth-mac-MulticastFramesXmittedOK
# ok 23 ethtool_std_stats.eth-mac-FramesReceivedOK
# ok 24 ethtool_std_stats.eth-mac-MulticastFramesReceivedOK
# ok 25 ethtool_std_stats.pause-tx_pause_frames
# ok 26 ethtool_std_stats.pause-rx_pause_frames
# # 10 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:10 error:0
ok 1 selftests: drivers/net/hw: ethtool_std_stats.sh
Please note that not all MACs are counting the software injected pause
frames as real Tx pause. For example, on a LS1028ARDB the selftest
output will reflect the fact that neither the ENETC MAC, nor the Felix
switch MAC are able to detect Tx pause frames injected by software.
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
(...)
# # software sent pause frames not detected
# ok 25 ethtool_std_stats.pause-tx_pause_frames # XFAIL
# ok 26 ethtool_std_stats.pause-rx_pause_frames
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-10-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch finalizes the transition to work with a single local
interface for the ethtool_rmon.sh test. Each 'ip link' and 'ethtool'
command used by the test is annotated with the necessary run_on in
order to be executed on the necessary target system, be it local, in
another network namespace or through ssh.
Since we need NETIF up and running also for control traffic, we now
expect that the interfaces are up and running and do not touch bring
them up or down at the end of the test. This is also documented in the
drivers/net/README.rst.
The ethtool_rmon.sh script can still be used in the older fashion by
passing two interfaces as command line arguments, the only restriction
is that those interfaces need to be already up.
$ DRIVER_TEST_CONFORMANT=no ./ethtool_rmon.sh eth0 eth1
As part of the kselftest infrastructure, this test can be run in the
following manner:
$ make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft-net-drv
$ cd /tmp/ksft-net-drv/
$ cat > ./drivers/net/net.config <<EOF
NETIF=endpmac17
LOCAL_V4=17.0.0.1
REMOTE_V4=17.0.0.2
REMOTE_TYPE=ssh
REMOTE_ARGS=root@192.168.5.200
EOF
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_rmon.sh
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: ethtool_rmon.sh
# TAP version 13
# 1..14
# ok 1 ethtool_rmon.rx-pkts64to64
# ok 2 ethtool_rmon.rx-pkts65to127
# ok 3 ethtool_rmon.rx-pkts128to255
# ok 4 ethtool_rmon.rx-pkts256to511
# ok 5 ethtool_rmon.rx-pkts512to1023
# ok 6 ethtool_rmon.rx-pkts1024to1518
# ok 7 ethtool_rmon.rx-pkts1519to10240
# ok 8 ethtool_rmon.tx-pkts64to64
# ok 9 ethtool_rmon.tx-pkts65to127
# ok 10 ethtool_rmon.tx-pkts128to255
# ok 11 ethtool_rmon.tx-pkts256to511
# ok 12 ethtool_rmon.tx-pkts512to1023
# ok 13 ethtool_rmon.tx-pkts1024to1518
# ok 14 ethtool_rmon.tx-pkts1519to10240
# # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net/hw: ethtool_rmon.sh
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-9-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the ethtool_rmon.sh test so that it uses the KTAP format for its
output. This is achieved by using the helpers found in ktap_helpers.sh.
An example output can be found below.
$ ./ethtool_rmon.sh endpmac3 endpmac4
TAP version 13
1..14
ok 1 ethtool_rmon.rx-pkts64to64
ok 2 ethtool_rmon.rx-pkts65to127
ok 3 ethtool_rmon.rx-pkts128to255
ok 4 ethtool_rmon.rx-pkts256to511
ok 5 ethtool_rmon.rx-pkts512to1023
ok 6 ethtool_rmon.rx-pkts1024to1518
ok 7 ethtool_rmon.rx-pkts1519to10240
ok 8 ethtool_rmon.tx-pkts64to64
ok 9 ethtool_rmon.tx-pkts65to127
ok 10 ethtool_rmon.tx-pkts128to255
ok 11 ethtool_rmon.tx-pkts256to511
ok 12 ethtool_rmon.tx-pkts512to1023
ok 13 ethtool_rmon.tx-pkts1024to1518
ok 14 ethtool_rmon.tx-pkts1519to10240
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-8-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ethtool_rmon.sh script checks that the number of packets sent /
received during a test matches the expected value with a 1% tolerance.
Since in the next patches this test will gain the capability to also be
run on systems with a single interface where the traffic generator is
accesible through ssh, use the UINT32_MAX as the upper limit. This is
necessary since the same interface will be used also for control traffic
(the ssh commands) as well as the mausezahn generated one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-7-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The selftests in drivers/net are slowly transitioning to being able to
be used on systems with a single network interface. The first step for the
ethtool_rmon.sh test is to only validate that the rmon counters are
properly exported on the first interface supplied as an argument.
Remove the rmon_histogram calls which intend to test also the rmon
counters on the 2nd interface. This also removes the need for the remote
system, which should be used only to inject traffic, to also support
rmon counters.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-6-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update some helpers so that they are capable to run commands on
different targets than the local one. This patch makes the necesasy
modification for those helpers / sections of code which are needed for
the ethtool_rmon.sh test that will be converted in the next patches.
For example, mac_addr_prepare() and mac_addr_restore() used when
STABLE_MAC_ADDRS=yes need to ensure stable MAC addresses on interfaces
located even in other namespaces. In order to do that, append the 'ip
link' commands with a 'run_on $dev' tag.
The same run_on is necessary also when verifying if all the interfaces
listed in NETIFS are indeed available.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-4-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend lib.sh so that it's able to parse driver/net/net.config and
environment variables such as NETIF, REMOTE_TYPE, LOCAL_V4 etc described
in drivers/net/README.rst.
In order to make the transition towards running with a single local
interface smoother for the bash networking driver tests, beside sourcing
the net.config file also translate the new env variables into the old
style based on the NETIFS array. Since the NETIFS array only holds the
network interface names, also add a new array - TARGETS - which keeps
track of the target on which a specific interfaces resides - local,
netns or accesible through an ssh command.
For example, a net.config which looks like below:
NETIF=eth0
LOCAL_V4=192.168.1.1
REMOTE_V4=192.168.1.2
REMOTE_TYPE=ssh
REMOTE_ARGS=root@192.168.1.2
will generate the NETIFS and TARGETS arrays with the following data.
NETIFS[p1]="eth0"
NETIFS[p2]="eth2"
TARGETS[eth0]="local:"
TARGETS[eth2]="ssh:root@192.168.1.2"
The above will be true if on the remote target, the interface which has
the 192.168.1.2 address is named eth2.
Since the TARGETS array is indexed by the network interface name,
document a new restriction README.rst which states that the remote
interface cannot have the same name as the local one. Keep the old way
of populating the NETIFS variable based on the command line arguments.
This will be invoked in case DRIVER_TEST_CONFORMANT = "no".
Also add a couple of helpers which can be used by tests which need to
run a specific bash command on a different target than the local system,
be it either another netns or a remote system accessible through ssh.
The __run_on() function is passed through $1 the target on which the
command should be executed while run_on() is passed the name of the
interface that is then used to retrieve the target from the TARGETS
array.
Also add a stub run_on() function in net/lib.sh so that users of the
net/lib.sh are going through the stub only since neither NETIFS nor
TARGETS are valid in that circumstance.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-3-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Even though pause frame statistics are not exported through the same
ethtool command, there is no point in adding another helper just for
them. Extent the ethtool_std_stats_get() function so that we are able to
interrogate using the same helper all the standard statistics.
And since we are touching the function, convert the initial ethtool call
as well to the jq --arg form in order to be easier to read.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-2-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Martin KaFai Lau says:
====================
pull-request: bpf-next 2026-04-01
We've added 2 non-merge commits during the last 2 day(s) which contain
a total of 3 files changed, 139 insertions(+), 23 deletions(-).
The main changes are:
1) skb_dst_drop(skb) when bpf prog does a encap or decap,
from Jakub Kicinski
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test that dst is cleared on same-protocol encap
net: Clear the dst when performing encap / decap
====================
Link: https://patch.msgid.link/20260401233956.4133413-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For (eg) "%*.*s" treat a negative field width as a request to left align
the output (the same as the '-' flag), and a negative precision to
request the default precision.
Set the default precision to -1 (not INT_MAX) and add explicit checks
to the string handling for negative values (makes the tet unsigned).
For numeric output check for 'precision >= 0' instead of testing
_NOLIBC_PF_FLAGS_CONTAIN(flags, '.').
This needs an inverted test, some extra goto and removes an indentation.
The changed conditionals fix printf("%0-#o", 0) - but '0' and '-' shouldn't
both be specified.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260323112247.3196-1-david.laight.linux@gmail.com
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
When platform firmware is committed to publishing EFI_CONVENTIONAL_MEMORY
in the memory map, but CXL fails to assemble the region, dax_hmem can
attempt to attach a dax device to the memory range.
Take advantage of the new ability to support multiple "hmem_platform"
devices, and to enable regression testing of several scenarios:
* CXL correctly assembles a region, check dax_hmem fails to attach dax
* CXL fails to assemble a region, check dax_hmem successfully attaches dax
* Check that loading the dax_cxl driver loads the dax_hmem driver
* Attempt to race cxl_mock_mem async probe vs dax_hmem probe flushing.
Check that both positive and negative cases.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260327052821.440749-10-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
set_id_regs creates a GIC3 guest when possible, and then proceeds
to write the ID registers as if they were not affected by the presence
of a GIC. As it turns out, ID_AA64PFR1_EL1 is the proof of the
contrary.
KVM now makes a point in exposing the GIC support to the guest,
no matter what userspace says (userspace such as QEMU is known to
write silly things at times).
Accommodate for this level of nonsense by teaching set_id_regs about
fields that are mutable, and only compare registers that have been
re-sanitised first.
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260401103611.357092-17-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
free_reserved_area() is related to memblock as it frees reserved memory
back to the buddy allocator, similar to what memblock_free_late() does.
Move free_reserved_area() to mm/memblock.c to prepare for further
consolidation of the functions that free reserved memory.
No functional changes.
Link: https://patch.msgid.link/20260323074836.3653702-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
reserve_bootmem_region() is only called from
memmap_init_reserved_pages() and it was in mm/mm_init.c because of its
dependecies on static init_deferred_page().
Since init_deferred_page() is not static anymore, move
reserve_bootmem_region(), rename it to memmap_init_reserved_range() and
make it static.
Update the comment describing it to better reflect what the function
does and drop bogus comment about reserved pages in free_bootmem_page().
Update memblock test stubs to reflect the core changes.
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Link: https://patch.msgid.link/20260323072042.3651061-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
