SMP initiator role shall be considered the one that initiates the
pairing procedure with SMP_CMD_PAIRING_REQ:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part H
page 1557:
Figure 2.1: LE pairing phases
Note that by sending SMP_CMD_SECURITY_REQ it doesn't change the role to
be Initiator.
Link: https://github.com/bluez/bluez/issues/567
Fixes: b28b494366 ("Bluetooth: Add strict checks for allowed SMP PDUs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Function hci_sched_le needs to update the respective counter variable
inplace other the likes of hci_quote_sent would attempt to use the
possible outdated value of conn->{le_cnt,acl_cnt}.
Link: https://github.com/bluez/bluez/issues/915
Fixes: 73d80deb7b ("Bluetooth: prioritizing data over HCI")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.
Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Ignores ifindex for types other than mcast/linklocal in ipv6 frag
reasm, from Tom Hughes.
2) Initialize extack for begin/end netlink message marker in batch,
from Donald Hunter.
3) Initialize extack for flowtable offload support, also from Donald.
4) Dropped packets with cloned unconfirmed conntracks in nfqueue,
later it should be possible to explore lookup after reinject but
Florian prefers this approach at this stage. From Florian Westphal.
5) Add selftest for cloned unconfirmed conntracks in nfqueue for
previous update.
6) Audit after filling netlink header successfully in object dump,
from Phil Sutter.
7-8) Fix concurrent dump and reset which could result in underflow
counter / quota objects.
netfilter pull request 24-08-15
* tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
====================
Link: https://patch.msgid.link/20240814222042.150590-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pci_request_regions is called to apply for PCI I/O and memory resources
when the driver is initialized, Therefore, when the driver is uninstalled,
pci_release_regions should be used to release PCI I/O and memory resources
instead of pci_release_mem_regions is used to release memory reasouces
only.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes
from hardware and the length of array is a fixed value. To void array out
of bound, make sure the loop time is not greater than the length of array
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When config TC during the reset process, may cause a deadlock, the flow is
as below:
pf reset start
│
▼
......
setup tc │
│ ▼
▼ DOWN: napi_disable()
napi_disable()(skip) │
│ │
▼ ▼
...... ......
│ │
▼ │
napi_enable() │
▼
UINIT: netif_napi_del()
│
▼
......
│
▼
INIT: netif_napi_add()
│
▼
...... global reset start
│ │
▼ ▼
UP: napi_enable()(skip) ......
│ │
▼ ▼
...... napi_disable()
In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it.
Fixes: bb6b94a896 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Consider the followed case that the user change speed and reset the net
interface. Before the hw change speed successfully, the driver get old
old speed from hw by timer task. After reset, the previous speed is config
to hw. As a result, the new speed is configed successfully but lost after
PF reset. The followed pictured shows more dirrectly.
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool -s 100G | |
+------------------>| set speed 100G |
| +--------------------->|
| | set successfully |
| |<---------------------+---+
| |query cfg (timer task)| |
| +--------------------->| | handle speed
| | return 200G | | changing event
| ethtool --reset |<---------------------+ | (100G)
+------------------>| cfg previous speed |<--+
| | after reset (200G) |
| +--------------------->|
| | +---+
| |query cfg (timer task)| |
| +--------------------->| | handle speed
| | return 100G | | changing event
| |<---------------------+ | (200G)
| | |<--+
| |query cfg (timer task)|
| +--------------------->|
| | return 200G |
| |<---------------------+
| | |
v v v
This patch save new speed if hw change speed successfully, which will be
used after reset successfully.
Fixes: 2d03eacc0b ("net: hns3: Only update mac configuation when necessary")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, if hns3 PF or VF FLR reset failed after five times retry,
the reset done process will directly release the semaphore
which has already released in hclge_reset_prepare_general.
This will cause down operation fail.
So this patch fixes it by adding reset state judgement. The up operation is
only called after successful PF FLR reset.
Fixes: 8627bdedc4 ("net: hns3: refactor the precedure of PF FLR")
Fixes: f28368bb45 ("net: hns3: refactor the procedure of VF FLR")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When deleting netns, it is possible to still have some tasks running,
e.g. background tasks like tcpdump running in the background, not
stopped because the test has been interrupted.
Before deleting the netns, it is then safer to kill all attached PIDs,
if any. That should reduce some noises after the end of some tests, and
help with the debugging of some issues. That's why this modification is
seen as a "fix".
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240813-upstream-net-20240813-selftests-net-lib-kill-v1-1-27b689b248b8@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix an issue where `devm_regulator_register()` would fail for PSE
controllers that do not support current limit control, such as simple
GPIO-based controllers like the podl-pse-regulator. The
`REGULATOR_CHANGE_CURRENT` flag and `max_uA` constraint are now
conditionally set only if the `pi_set_current_limit` operation is
supported. This change prevents the regulator registration routine from
attempting to call `pse_pi_set_current_limit()`, which would return
`-EOPNOTSUPP` and cause the registration to fail.
Fixes: 4a83abcef5 ("net: pse-pd: Add new power limit get and set c33 features")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Kyle Swenson <kyle.swenson@est.tech>
Link: https://patch.msgid.link/20240813073719.2304633-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 94833addfa ("net: thunderx: Unembed netdev structure") had
a go at dynamically allocating the netdev structures for the thunderx_bgx
driver. This change results in my ThunderX box catching fire (to be fair,
it is what it does best).
The issues with this change are that:
- bgx_lmac_enable() is called *after* bgx_acpi_register_phy() and
bgx_init_of_phy(), both expecting netdev to be a valid pointer.
- bgx_init_of_phy() populates the MAC addresses for *all* LMACs
attached to a given BGX instance, and thus needs netdev for each of
them to have been allocated.
There is a few things to be said about how the driver mixes LMAC and
BGX states which leads to this sorry state, but that's beside the point.
To address this, go back to a situation where all netdev structures
are allocated before the driver starts relying on them, and move the
freeing of these structures to driver removal. Someone brave enough
can always go and restructure the driver if they want.
Fixes: 94833addfa ("net: thunderx: Unembed netdev structure")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Breno Leitao <leitao@debian.org>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240812141322.1742918-1-maz@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CMIS 5.2 standard section 9.4.2 defines four types of firmware update
supported mechanism: None, only LPL, only EPL, both LPL and EPL.
Currently, only LPL (Local Payload) type of write firmware block is
supported. However, if the module supports both LPL and EPL the flashing
process wrongly fails for no supporting LPL.
Fix that, by allowing the write mechanism to be LPL or both LPL and
EPL.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reported-by: Vladyslav Mykhaliuk <vmykhaliuk@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240812140824.3718826-1-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kalle Valo says:
====================
wireless fixes for v6.11
We have few fixes to drivers. The most important here is a fix for
iwlwifi which caused major slowdowns for several users.
* tag 'wireless-2024-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: correctly lookup DMA address in SG table
wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change
wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion
wifi: rtlwifi: rtl8192du: Initialise value32 in _rtl92du_init_queue_reserved_page
wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850
====================
Link: https://patch.msgid.link/20240814171606.E14A0C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change expected_buf from (const void *) to (const char *)
in function __recvpair().
This change fixes the below warnings during test compilation:
```
In file included from msg_oob.c:14:
msg_oob.c: In function ‘__recvpair’:
../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]
../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’
../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]
../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’
```
Fixes: d098d77232 ("selftest: af_unix: Add msg_oob.c.")
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240814080743.1156166-1-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Objects' dump callbacks are not concurrency-safe per-se with reset bit
set. If two CPUs perform a reset at the same time, at least counter and
quota objects suffer from value underrun.
Prevent this by introducing dedicated locking callbacks for nfnetlink
and the asynchronous dump handling to serialize access.
Fixes: 43da04a593 ("netfilter: nf_tables: atomic dump and reset for stateful objects")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Outsource the reply skb preparation for non-dump getrule requests into a
distinct function. Prep work for object reset locking.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In theory, dumpreset may fail and invalidate the preceeding log message.
Fix this and use the occasion to prepare for object reset locking, which
benefits from a few unrelated changes:
* Add an early call to nfnetlink_unicast if not resetting which
effectively skips the audit logging but also unindents it.
* Extract the table's name from the netlink attribute (which is verified
via earlier table lookup) to not rely upon validity of the looked up
table pointer.
* Do not use local variable family, it will vanish.
Fixes: 8e6cf365e1 ("audit: log nftables configuration change events")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Trigger cloned skbs leaving softirq protection.
This triggers splat without the preceeding change
("netfilter: nf_queue: drop packets with cloned unconfirmed
conntracks"):
WARNING: at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm..
because local delivery and forwarding will race for confirmation.
Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conntrack assumes an unconfirmed entry (not yet committed to global hash
table) has a refcount of 1 and is not visible to other cores.
With multicast forwarding this assumption breaks down because such
skbs get cloned after being picked up, i.e. ct->use refcount is > 1.
Likewise, bridge netfilter will clone broad/mutlicast frames and
all frames in case they need to be flood-forwarded during learning
phase.
For ip multicast forwarding or plain bridge flood-forward this will
"work" because packets don't leave softirq and are implicitly
serialized.
With nfqueue this no longer holds true, the packets get queued
and can be reinjected in arbitrary ways.
Disable this feature, I see no other solution.
After this patch, nfqueue cannot queue packets except the last
multicast/broadcast packet.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 264640fc2c ("ipv6: distinguish frag queues by device
for multicast and link-local packets") modified the ipv6 fragment
reassembly logic to distinguish frag queues by device for multicast
and link-local packets but in fact only the main reassembly code
limits the use of the device to those address types and the netfilter
reassembly code uses the device for all packets.
This means that if fragments of a packet arrive on different interfaces
then netfilter will fail to reassemble them and the fragments will be
expired without going any further through the filters.
Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Tom Hughes <tom@compton.nu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch is based on the discussions between Neal Cardwell and
Eric Dumazet in the link
https://lore.kernel.org/netdev/20240726204105.1466841-1-quic_subashab@quicinc.com/
It was correctly pointed out that tp->window_clamp would not be
updated in cases where net.ipv4.tcp_moderate_rcvbuf=0 or if
(copied <= tp->rcvq_space.space). While it is expected for most
setups to leave the sysctl enabled, the latter condition may
not end up hitting depending on the TCP receive queue size and
the pattern of arriving data.
The updated check should be hit only on initial MSS update from
TCP_MIN_MSS to measured MSS value and subsequently if there was
an update to a larger value.
Fixes: 05f76b2d63 ("tcp: Adjust clamping window for applications specifying SO_RCVBUF")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ssn_offset field is u32 and is placed into the netlink response with
nla_put_u32(), but only 2 bytes are reserved for the attribute payload
in subflow_get_info_size() (even though it makes no difference
in the end, as it is aligned up to 4 bytes). Supply the correct
argument to the relevant nla_total_size() call to make it less
confusing.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240812065024.GA19719@asgard.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent change to the driver exposed a bug where the MAC RX
filters (unicast MAC, broadcast MAC, and multicast MAC) are
configured and enabled before the RX path is fully initialized.
The result of this bug is that after the PHY is started packets
that match these MAC RX filters start to flow into the RX FIFO.
And then, after rx_init() is completed, these packets will go
into the driver RX ring as well. If enough packets are received
to fill the RX ring (default size is 128 packets) before the call
to request_irq() completes, the driver RX function becomes stuck.
This bug is intermittent but is most likely to be seen where the
oob_net0 interface is connected to a busy network with lots of
broadcast and multicast traffic.
All the MAC RX filters must be disabled until the RX path is ready,
i.e. all initialization is done and all the IRQs are installed.
Fixes: f7442a634a ("mlxbf_gige: call request_irq() after NAPI initialized")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240809163612.12852-1-davthompson@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After napi_complete_done() is called when NAPI is polling in the current
process context, another NAPI may be scheduled and start running in
softirq on another CPU and may ring the doorbell before the current CPU
does. When combined with unnecessary rings when there is no need to arm
the CQ, it triggers error paths in the hardware.
This patch fixes this by calling napi_complete_done() after doorbell
rings. It limits the number of unnecessary rings when there is
no need to arm. MANA hardware specifies that there must be one doorbell
ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as
soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical
workloads, the 4 CQ wraparounds proves to be big enough that it rarely
exceeds this limit before all the napi weight is consumed.
To implement this, add a per-CQ counter cq->work_done_since_doorbell,
and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ.
Cc: stable@vger.kernel.org
Fixes: e1b5683ff6 ("net: mana: Move NAPI from EQ to CQ")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ath.git patch for v6.11
We have a single patch for the next 6.11-rc which introduces a
workaround to ath12k which addresses a WCN7850 hardware issue that
prevents proper operation with unaligned transmit buffers.
The code to lookup the scatter gather table entry assumed that it was
possible to use sg_virt() in order to lookup the DMA address in a mapped
scatter gather table. However, this assumption is incorrect as the DMA
mapping code may merge multiple entries into one. In that case, the DMA
address space may have e.g. two consecutive pages which is correctly
represented by the scatter gather list entry, however the virtual
addresses for these two pages may differ and the relationship cannot be
resolved anymore.
Avoid this problem entirely by working with the offset into the mapped
area instead of using virtual addresses. With that we only use the DMA
length and DMA address from the scatter gather list entries. The
underlying DMA/IOMMU code is therefore free to merge two entries into
one even if the virtual addresses space for the area is not continuous.
Fixes: 90db507552 ("wifi: iwlwifi: use already mapped data when TXing an AMSDU")
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://lore.kernel.org/r/ZrNRoEbdkxkKFMBi@debian.local
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240812110640.460514-1-benjamin@sipsolutions.net
When there are multiple ap interfaces on one band and with WED on,
turning the interface down will cause a kernel panic on MT798X.
Previously, cb_priv was freed in mtk_wed_setup_tc_block() without
marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too.
Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL
in mtk_wed_setup_tc_block_cb().
----------
Unable to handle kernel paging request at virtual address 0072460bca32b4f5
Call trace:
mtk_wed_setup_tc_block_cb+0x4/0x38
0xffffffc0794084bc
tcf_block_playback_offloads+0x70/0x1e8
tcf_block_unbind+0x6c/0xc8
...
---------
Fixes: 799684448e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Zheng Zhang <everything411@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to
create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment
is affected by the alloc_size passed into napi_build_skb(). The size needs
to be aligned properly for better performance and atomic operations.
Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic
operations may panic on the skb_shinfo(skb)->dataref due to alignment fault.
To fix this bug, add proper alignment to the alloc_size calculation.
Sample panic info:
[ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce
[ 253.300900] Mem abort info:
[ 253.301760] ESR = 0x0000000096000021
[ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits
[ 253.304268] SET = 0, FnV = 0
[ 253.305172] EA = 0, S1PTW = 0
[ 253.306103] FSC = 0x21: alignment fault
Call trace:
__skb_clone+0xfc/0x198
skb_clone+0x78/0xe0
raw6_local_deliver+0xfc/0x228
ip6_protocol_deliver_rcu+0x80/0x500
ip6_input_finish+0x48/0x80
ip6_input+0x48/0xc0
ip6_sublist_rcv_finish+0x50/0x78
ip6_sublist_rcv+0x1cc/0x2b8
ipv6_list_rcv+0x100/0x150
__netif_receive_skb_list_core+0x180/0x220
netif_receive_skb_list_internal+0x198/0x2a8
__napi_poll+0x138/0x250
net_rx_action+0x148/0x330
handle_softirqs+0x12c/0x3a0
Cc: stable@vger.kernel.org
Fixes: 80f6215b45 ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pawel Dembicki says:
====================
net: dsa: vsc73xx: fix MDIO bus access and PHY opera
This series are extracted patches from net-next series [0].
The VSC73xx driver has issues with PHY configuration. This patch series
fixes most of them.
The first patch synchronizes the register configuration routine with the
datasheet recommendations.
Patches 2-3 restore proper communication on the MDIO bus. Currently,
the write value isn't sent to the MDIO register, and without a busy check,
communication with the PHY can be interrupted. This causes the PHY to
receive improper configuration and autonegotiation could fail.
The fourth patch removes the PHY reset blockade, as it is no longer
required.
After fixing the MDIO operations, autonegotiation became possible.
The last patch removes the blockade, which became unnecessary after
the MDIO operations fix.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=874739&state=%2A&archive=both
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Resetting the VSC73xx PHY was problematic because the MDIO bus, without
a busy check, read and wrote incorrect register values.
My investigation indicates that resetting the PHY only triggers changes
in configuration. However, improper register values written earlier
were only exposed after a soft reset.
The reset itself wasn't the issue; rather, the problem stemmed from
incorrect read and write operations.
A 'soft_reset' can now proceed normally. There are no reasons to keep
the VSC73xx from being reset.
This commit removes the reset blockade in the 'vsc73xx_phy_write'
function.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VSC73xx has a busy flag used during MDIO operations. It is raised
when MDIO read/write operations are in progress. Without it, PHYs are
misconfigured and bus operations do not work as expected.
Fixes: 05bd97fc55 ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the 'vsc73xx_phy_write' function, the register value is missing,
and the phy write operation always sends zeros.
This commit passes the value variable into the proper register.
Fixes: 05bd97fc55 ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the datasheet description ("Port Mode Procedure" in 5.6.2),
the VSC73XX_MAC_CFG_WEXC_DIS bit is configured only for half duplex mode.
The WEXC_DIS bit is responsible for MAC behavior after an excessive
collision. Let's set it as described in the datasheet.
Fixes: 05bd97fc55 ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In axiethernet header fix register defines comment description to be
inline with IP documentation. It updates MAC configuration register,
MDIO configuration register and frame filter control description.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't dereference "skb" after calling vcc->push() because the skb
is released.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ueue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-07 (igc)
This series contains updates to igc driver only.
Faizal adjusts the size of the MAC internal buffer on i226 devices to
resolve an errata for leaking packet transmits. He also corrects a
condition in which qbv_config_change_errors are incorrectly counted.
Lastly, he adjusts the conditions for resetting the adapter when
changing TSN Tx mode and corrects the conditions in which gtxoffset
register is set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.
It also compresses two lines to a single line.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, an ethtool rx flow with no attrs would not be added to the
NIC as it has no rules to configure the hw with, but it would be
reported as successful to the caller (return code 0). This is confusing
for the user as ethtool then reports "Added rule $num", but no rule was
actually added.
This change corrects that by instead reporting these wrong rules as
-EINVAL.
Fixes: b29c61dac3 ("net/mlx5e: Ethtool steering flow validation refactoring")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808144107.2095424-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
