TEAC Corporation launched IF-FW/DM MkII as an add-in card for TASCAM
DM-3200 and DM-4800. This card uses TC Applied Technologies DICE II
ASIC.
This commit supports the add-in card. The configuration ROM content
includes some quirks:
- The category value stored in chip_ID_hi field of bus information block
is zero.
- The value of model in unit directory (0x00022e) is different from the
one in root directory (0x000006).
The hardware allows users to select the total number of audio data channels
available for system from 16 and 32 channels for both input and output
direction. In 16-channel mode, all audio data are transferred in a
single isochronous packet stream, while in 32-channel mode, they are
transferred across two streams. After the user changes the channel
configuration on the hardware panel, the device temporarily disappears
from the bus and reappears with the new stream formats. During device
probing the ALSA dice driver checks the number of available isochronous
packet streams to determine the active mode of the hardware.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/20251017111145.263295-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This laptop requires the same quirk as Lenovo Yoga9 14IAP7 for
fixing the bass speaker problems.
Use HDA_CODEC_QUIRK to match on the codec SSID to avoid conflict with
the Lenovo Legion Slim 7 16IRH8, which has the same PCI SSID.
Signed-off-by: J-Donald Tournier <jdtournier@gmail.com>
Link: https://patch.msgid.link/20251018145322.39119-1-jdournier@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v6.18
A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series addresses a set of issues in the Nuvoton NAU88L21
audio codec driver related to interrupt handling and jack hotplug
detection reliability.
The changes focus on:
* Eliminating race conditions between jack insertion and ejection events
* Ensuring interrupts are consistently and correctly cleared before
unmasking
* Introducing a DMI-based quirk to bypass the jack debounce circuit on
Valve Steam Deck, improving detection accuracy under stress
* Improving robustness of the IRQ handler by avoiding unnecessary
blocking operations
The series has been tested on affected hardware to verify correct
behavior during repeated and rapid jack hotplug cycles.
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
Vendor quirk QUIRK_FLAG_CTL_MSG_DELAY_1M was inadvertently missing when
adding quirk for Logitech H390. Add it back.
Fixes: 2b929b6eec ("ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ID 045e:070f Microsoft Corp. LifeChat LX-3000 Headset
has muted minimum Speaker Playback Volume, and 4 amixer steps were
observed to produce 1 actual volume step.
Apply min_mute quirk and correct res=48 -> 4*48.
Tested with the device.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference.
Fixes: cb8ea62e64 ("ASoC: amd/sdw_utils: add sof based soundwire generic machine driver")
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Link: https://patch.msgid.link/20251015075530.146851-1-liqiang01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In try_to_register_card(), the return value of usb_ifnum_to_if() is
passed directly to usb_interface_claimed() without a NULL check, which
will lead to a NULL pointer dereference when creating an invalid
USB audio device. Fix this by adding a check to ensure the interface
pointer is valid before passing it to usb_interface_claimed().
Fixes: 39efc9c8a9 ("ALSA: usb-audio: Fix last interface check for registration")
Closes: https://lore.kernel.org/all/CANypQFYtQxHL5ghREs-BujZG413RPJGnO5TH=xjFBKpPts33tA@mail.gmail.com/
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix spelling of CIP_NO_HEADER to prevent a kernel-doc warning.
Warning: amdtp-stream.h:57 Enum value 'CIP_NO_HEADER' not described in enum 'cip_flags'
Warning: amdtp-stream.h:57 Excess enum value '%CIP_NO_HEADERS' description in 'cip_flags'
Fixes: 3b196c394d ("ALSA: firewire-lib: add no-header packet processing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The interrupt handler offloads the microphone detection logic to
nau8821_jdet_work(), which implies a sleep operation. However, before
being able to process any subsequent hotplug event, the interrupt
handler needs to wait for any prior scheduled work to complete.
Move the sleep out of jdet_work by converting it to a delayed work.
This eliminates the undesired blocking in the interrupt handler when
attempting to cancel a recently scheduled work item and should help
reducing transient input reports that might confuse user-space.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-5-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stress testing the audio jack hotplug handling on a few Steam Deck units
revealed that the debounce circuit is responsible for having a negative
impact on the detection reliability, e.g. in some cases the ejection
interrupt is not fired, while in other instances it goes into a kind of
invalid state and generates a flood of misleading interrupts.
Add new entries to the DMI table introduced via commit 1bc40efdaf
("ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect")
and extend the quirk logic to allow bypassing the debounce circuit used
for jack detection on Valve Steam Deck LCD and OLED models.
While at it, rename existing NAU8821_JD_ACTIVE_HIGH quirk bitfield to
NAU8821_QUIRK_JD_ACTIVE_HIGH. This should help improve code readability
by differentiating from similarly named register bits.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-4-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The interrupt handler attempts to perform some IRQ status clear
operations *after* rather than *before* unmasking and enabling
interrupts. This is a rather fragile approach since it may generally
lead to missing IRQ requests or causing spurious interrupts.
Make use of the nau8821_irq_status_clear() helper instead of
manipulating the related register directly and ensure any interrupt
clearing is performed *after* the target interrupts are disabled/masked
and *before* proceeding with additional interrupt unmasking/enablement
operations.
This also implicitly drops the redundant clear operation of the ejection
IRQ in the interrupt handler, since nau8821_eject_jack() has been
already responsible for clearing all active interrupts.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Fixes: 2551b6e899 ("ASoC: nau8821: Add headset button detection")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-3-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of adding yet another utility function for dealing with the
interrupt clearing register, generalize nau8821_int_status_clear_all()
by renaming it to nau8821_irq_status_clear(), whilst introducing a
second parameter to allow restricting the operation scope to a single
interrupt instead of the whole range of active IRQs.
While at it, also fix a spelling typo in the comment block.
Note this is mainly a prerequisite for subsequent patches aiming to
address some deficiencies in the implementation of the interrupt
handler. Thus the presence of the Fixes tag below is intentional, to
facilitate backporting.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-2-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The microphone detection work scheduled by a prior jack insertion
interrupt may still be in a pending state or under execution when a jack
ejection interrupt has been fired.
This might lead to a racing condition or nau8821_jdet_work() completing
after nau8821_eject_jack(), which will override the currently
disconnected state of the jack and incorrectly report the headphone or
the headset as being connected.
Cancel any pending jdet_work or wait for its execution to finish before
attempting to handle the ejection interrupt.
Proceed similarly before launching the eject handler as a consequence of
detecting an invalid insert interrupt.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251003-nau8821-jdet-fixes-v1-1-f7b0e2543f09@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The software reset for TAS5825 is different form other chips, as it will
set as 0x11 instead of 0x1 during reset in the tasdevice_reset(). So set
tas2781_hda::tasdevice_priv::chip_id as TAS5825, tasdevice_reset() can
work correctly.
Fixes: 7ceb69ca82 ("ASoC: tas2781: Add tas2118, tas2x20, tas5825 support")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
Pull slab fix from Vlastimil Babka:
"A NULL pointer deref hotfix"
* tag 'slab-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: fix barn NULL pointer dereference on memoryless nodes
Pull more updates from Andrew Morton:
"Just one series here - Mike Rappoport has taught KEXEC handover to
preserve vmalloc allocations across handover"
* tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/test_kho: use kho_preserve_vmalloc instead of storing addresses in fdt
kho: add support for preserving vmalloc allocations
kho: replace kho_preserve_phys() with kho_preserve_pages()
kho: check if kho is finalized in __kho_preserve_order()
MAINTAINERS, .mailmap: update Umang's email address
Pull misc fixes from Andrew Morton:
"7 hotfixes. All 7 are cc:stable and all 7 are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-10-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hugetlb: avoid soft lockup when mprotect to large memory area
fsnotify: pass correct offset to fsnotify_mmap_perm()
mm/ksm: fix flag-dropping behavior in ksm_madvise
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
mm/rmap: fix soft-dirty and uffd-wp bit loss when remapping zero-filled mTHP subpage to shared zeropage
mm/thp: fix MTE tag mismatch when replacing zero-filled subpages
memcg: skip cgroup_file_notify if spinning is not allowed
There're several different actual hardwares sold by Huawei, using the
same USB ID 12d1:3a07.
The first one we found, having a volume control named "Headset Playback
Volume", reports a min value -15360, and will mute iff setting it to
-15360. It can be simply fixed by quirk flag MIXER_PLAYBACK_MIN_MUTE,
which we have already submitted previously.[1]
The second one we found today, having a volume control named "PCM
Playback Volume", reports its min -11520 and res 256, and will mute
when less than -11008. Because of the already existing quirk flag, we
can just set its min to -11264, and the new minimum value will still
not be available to userspace, so that userspace's minimum will be the
correct -11008.
1. https://lore.kernel.org/all/20250903-sound-v1-3-d4ca777b8512@uniontech.com/
Tested-by: Guoli An <anguoli@uniontech.com>
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This motherboard uses USB audio instead, causing this driver to complain
about "no codecs found!".
Add it to the denylist to silence the warning.
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ae7abe36e3 ("ALSA: hda/realtek: Add CS35L41 support for Thinkpad laptops")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return value of a function acpi_evaluate_dsm() is dereferenced without
checking for NULL, but it is usually checked for this function.
acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns
acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 447106e92a ("ALSA: hda: cs35l41: Support mute notifications for CS35L41 HDA")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fix to use a per CPU buffer to read user space tested only the writes
to trace_marker. But it appears that the selftests are missing tests to
the trace_maker_raw file. The trace_maker_raw file is used by applications
that writes data structures and not strings into the file, and the tools
read the raw ring buffer to process the structures it writes.
The fix that reads the per CPU buffers passes the new per CPU buffer to
the trace_marker file writes, but the update to the trace_marker_raw write
read the data from user space into the per CPU buffer, but then still used
then passed the user space address to the function that records the data.
Pass in the per CPU buffer and not the user space address.
TODO: Add a test to better test trace_marker_raw.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20251011035243.386098147@kernel.org
Fixes: 64cf7d058a ("tracing: Have trace_marker use per-cpu data to read user space")
Reported-by: syzbot+9a2ede1643175f350105@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e973f5.050a0220.1186a4.0010.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
After commit 5ab23c7923 ("modpost: Create modalias for builtin
modules"), relocatable RISC-V kernels with CONFIG_KASAN=y start failing
when attempting to strip the module device table symbols:
riscv64-linux-objcopy: not stripping symbol `__mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table' because it is named in a relocation
make[4]: *** [scripts/Makefile.vmlinux:97: vmlinux] Error 1
The relocation appears to come from .LASANLOC5 in .data.rel.local:
$ llvm-objdump --disassemble-symbols=.LASANLOC5 --disassemble-all -r drivers/irqchip/irq-starfive-jh8100-intc.o
drivers/irqchip/irq-starfive-jh8100-intc.o: file format elf64-littleriscv
Disassembly of section .data.rel.local:
0000000000000180 <.LASANLOC5>:
...
1d0: 0000 unimp
00000000000001d0: R_RISCV_64 __mod_device_table__kmod_irq_starfive_jh8100_intc__of__starfive_intc_irqchip_match_table
...
This section appears to come from GCC for including additional
information about global variables that may be protected by KASAN.
There appears to be no way to opt out of the generation of these symbols
through either a flag or attribute. Attempting to remove '.LASANLOC*'
with '--strip-symbol' results in the same error as above because these
symbols may refer to (thus have relocation between) each other.
Avoid this build breakage by switching to '--strip-unneeded-symbol' for
removing __mod_device_table__ symbols, as it will only remove the symbol
when there is no relocation pointing to it. While this may result in a
little more bloat in the symbol table in certain configurations, it is
not as bad as outright build failures.
Fixes: 5ab23c7923 ("modpost: Create modalias for builtin modules")
Reported-by: Charles Mirabile <cmirabil@redhat.com>
Closes: https://lore.kernel.org/20251007011637.2512413-1-cmirabil@redhat.com/
Suggested-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
