-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `struct_group_tagged()` helper
to separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
nvif_ioctl_v0_hdr` and `struct nvif_ioctl_mthd_v0_hdr` to replace the
type of the objects causing trouble in multiple structures.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix the following warnings:
drivers/gpu/drm/nouveau/nvif/object.c:60:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:233:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:152:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:138:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nvif/object.c:104:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nouveau_svm.c:83:35: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nouveau_svm.c:82:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/Z6xjZhHxRp4Bu_SX@kspp
There is a timeout failure been found during stress tests. If the firmware
generates a mailbox response right after driver clears the mailbox channel
interrupt register, the hardware will not generate an interrupt for the
response. This causes the unexpected mailbox command timeout.
To handle this failure, driver checks the interrupt register before
exiting mailbox_rx_worker(). If there is a new response, driver goes back
to process it.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226161810.4188334-1-lizhi.hou@amd.com
When the drm-driver probes, it mainly creates the component device, where
all the sub-drivers (vops, hdmi, etc) hook into.
This will cause the shutdown handler to get called on shutdown, even
though the drm-device might not have been set up, or the component bind
might have failed.
So use the new component helper to check whether the drm-device is up
and only then call the drm-atomic helper to release all the drm magic.
This prevents failures when the drm-device is never set, or has been
freed up already for example by a probe-defer during the component bind.
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220234141.2788785-3-heiko@sntech.de
The component helpers already expose the bound status in debugfs, but at
times it might be necessary to also check that state in the kernel and
act differently depending on the result.
For example the shutdown handler of a drm-driver might need to stop
a whole output pipeline if the drm device is up and running, but may
run into problems if that drm-device has never been set up before,
for example because the binding deferred.
So add a little helper that returns the bound status for a componet
device.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220234141.2788785-2-heiko@sntech.de
Replace drm_err() calls in vop2_bind() and vop2_create_crtcs() with
dev_err_probe(), to simplify error handling and improve consistency.
Additionally, ensure the already existing dev_err_probe() invocations
pass drm->dev instead of dev as their first argument, so that we get the
actual reason in case of -EPROBE_DEFER errors:
platform display-subsystem: deferred probe pending: (reason unknown)
vs.
platform display-subsystem: deferred probe pending: rockchip-drm: <actual reason>
While at it, add the missing '\n' to some of the message strings.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250223-vop2-hdmi1-disp-modes-v2-2-f4cec5e06fbe@collabora.com
The RK3588 specific implementation is currently quite limited in terms
of handling the full range of display modes supported by the connected
screens, e.g. 2560x1440@75Hz, 2048x1152@60Hz, 1024x768@60Hz are just a
few of them.
Additionally, it doesn't cope well with non-integer refresh rates like
59.94, 29.97, 23.98, etc.
Make use of HDMI1 PHY PLL as a more accurate DCLK source to handle
all display modes up to 4K@60Hz.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250223-vop2-hdmi1-disp-modes-v2-1-f4cec5e06fbe@collabora.com
Replace platform_get_resource_byname + devm_ioremap_resource
with just devm_platform_ioremap_resource()
Used Coccinelle to do this change. SmPl patch:
//rule s/(devm_)platform_get_resource_byname +
//(devm_)ioremap/devm_platform_ioremap_resource.
@rule_3@
identifier res;
expression ioremap;
identifier pdev;
constant mem;
expression name;
@@
-struct resource *res;
<+...
-res = platform_get_resource_byname(pdev,mem,name);
<...
-if (!res) {
-...
-}
...>
-ioremap = devm_ioremap(...);
+ioremap = devm_platform_ioremap_resource_byname(pdev,name);
...+>
v2: Change the SmPl patch to work on multiple occurences of
the pattern. This also fixes the compilation error.
v3: Do not convert "hd" resource to follow the rest of the
refactor. (Maxime)
v4: fix compiler error
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250225-memory-drm-misc-next-v1-11-9d0e8761107a@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link Training Tunable PHY Repeaters (LTTPRs) are defined in DisplayPort
1.4a specification. As the name suggests, these PHY repeaters are
capable of adjusting their output for link training purposes.
According to the DisplayPort standard, LTTPRs have two operating
modes:
- non-transparent - it replies to DPCD LTTPR field specific AUX
requests, while passes through all other AUX requests
- transparent - it passes through all AUX requests.
Switching between these two modes is done by the DPTX by issuing
an AUX write to the DPCD PHY_REPEATER_MODE register.
The msm DP driver is currently lacking any handling of LTTPRs.
This means that if at least one LTTPR is found between DPTX and DPRX,
the link training would fail if that LTTPR was not already configured
in transparent mode.
The section 3.6.6.1 from the DisplayPort v2.0 specification mandates
that before link training with the LTTPR is started, the DPTX may place
the LTTPR in non-transparent mode by first switching to transparent mode
and then to non-transparent mode. This operation seems to be needed only
on first link training and doesn't need to be done again until device is
unplugged.
It has been observed on a few X Elite-based platforms which have
such LTTPRs in their board design that the DPTX needs to follow the
procedure described above in order for the link training to be successful.
So add support for reading the LTTPR DPCD caps to figure out the number
of such LTTPRs first. Then, for platforms (or Type-C dongles) that have
at least one such an LTTPR, set its operation mode to transparent mode
first and then to non-transparent, just like the mentioned section of
the specification mandates.
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-4-c865d0e56d6e@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
LTTPRs operating modes are defined by the DisplayPort standard and the
generic framework now provides a helper to switch between them, which
is handling the explicit disabling of non-transparent mode and its
disable->enable sequence mentioned in the DP Standard v2.0 section
3.6.6.1.
So use the new drm generic helper instead as it makes the code a bit
cleaner. Since the driver specific implementation holds the
lttrp_common_caps, if the call to the drm generic helper fails, the
lttrp_common_caps need to be updated as the helper has already rolled
back to transparent mode.
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-3-c865d0e56d6e@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
According to the DisplayPort standard, LTTPRs have two operating
modes:
- non-transparent - it replies to DPCD LTTPR field specific AUX
requests, while passes through all other AUX requests
- transparent - it passes through all AUX requests.
Switching between this two modes is done by the DPTX by issuing
an AUX write to the DPCD PHY_REPEATER_MODE register.
Add a generic helper that allows switching between these modes.
Also add a generic wrapper for the helper that handles the explicit
disabling of non-transparent mode and its disable->enable sequence
mentioned in the DP Standard v2.0 section 3.6.6.1. Do this in order
to move this handling out of the vendor specific driver implementation
into the generic framework.
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-1-c865d0e56d6e@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.
For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd->stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.
Mitigate this by casting 'epd->factored_stage_time' to wider type before
any multiplication is done.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3589211e9b ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
