The SPDX License Identifier line renders the GPL boilerplate text
superfluous, so let's remove it.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The true Hi-Z (a.k.a. high impedance) mode is when pin is completely
disconnected from the chip. This includes input buffer as well.
Nevertheless, some hardware may not support that mode and they are
considering input only as Hi-Z, but more precisely it is an equivalent
to that, in electronics it's basically "an antenna mode".
Sligthly correct documentation to take the above into consideration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
IRQ framework provides special type and getter to transform
the Linux IRQ to the hardware pin. Use that type and getter
function instead of direct access.
While at it, amend an indentation in a couple of places.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiod_find_by_fwnode() already checks for NULL and returns
correct error code in case fwnode is invalid. Drop the respective
check and assignment in the gpiod_find_and_request().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The functions that operates on the same device object would
have the same namespace for better code understanding and
maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The devprop prefix in the devprop_gpiochip_set_names() adds confusion.
Get rid of it.
Note we have more than one function in the same module that handles
one or more device properties. This change will unify the naming schema
for all of them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/gpio/gpio-raspberrypi-exp.c:237:34: error: ‘rpi_exp_gpio_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/gpio/gpio-xra1403.c:198:34: error: ‘xra1403_spi_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/gpio/gpio-sama5d2-piobu.c:230:34: error: ‘sama5d2_piobu_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/gpio/gpio-sifive.c:263:34: error: ‘sifive_gpio_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/gpio/gpio-visconti.c:187:34: error: ‘visconti_gpio_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/gpio/gpio-rcar.c:435:34: error: ‘gpio_rcar_of_table’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/gpio/gpio-altera.c:324:34: error: ‘altera_gpio_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/gpio/gpio-ftgpio010.c:336:34: error: ‘ftgpio_gpio_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Run the steps to deactivate device in the reserved order to what
it has been done in gpio_sim_device_activate_unlocked().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
This driver require some special care: .irq_ack() was copied
from dummy_irq_chip where it was defined as noop. This only
makes sense if using handle_edge_irq() that will unconditionally
call .irq_ack() to avoid a crash, but this driver is not ever
using handle_edge_irq() so just avoid assigning .irq_ack().
A separate chip had to be created for the non-wakeup instance.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
The IRQ chip was unnamed which seems unwise, so we just
assign the name "HISI-GPIO".
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver was implemented in a way that made the irqchip optional, if a
irq was not present in the device tree. However, all of the device trees
have always had an irq, so the optional-ness has never been used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is nothing specific about gpio_bus_match(), so we may
simply move it to the top of the file and get rid of forward
declaration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
intel-gpio for v6.4-1
* Remove some of the legacy APIs that are not used anymore
* Clean up headers in the GPIO library and drivers
The following is an automated git shortlog grouped by driver:
aggregator:
- Add missing header(s)
ARM:
- s3c64xx: Use the right include
- orion/gpio: Use the right include
gpiolib:
- Clean up headers
- Group forward declarations in consumer.h
- Deduplicate forward declarations in consumer.h
- Drop unused forward declaration from driver.h
- split of_mm_gpio_chip out of linux/of_gpio.h
- split linux/gpio/driver.h out of linux/gpio.h
- remove legacy gpio_export()
- remove gpio_set_debounce()
- remove asm-generic/gpio.h
- coldfire: remove custom asm/gpio.h
- remove empty asm/gpio.h files
- Make the legacy <linux/gpio.h> consumer-only
hte:
- tegra-194: Use proper includes
reg:
- Add missing header(s)
regmap:
- Add missing header(s)
There is a few things done:
- include only the headers we are direct user of
- when pointer is in use, provide a forward declaration
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The struct fwnode_handle pointer is used in both branches of ifdeffery,
no need to have a copy of the same in each of them, just make it global.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no struct device_node pointers anywhere in the header,
drop unused forward declaration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, split out the GPIO group of headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, split out the GPIO group of headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, drop unused linux/gpio.h and split out the GPIO group of
headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
This is a rarely used feature that has nothing to do with the
client-side of_gpio.h.
Split it out with a separate header file and Kconfig option
so it can be removed on its own timeline aside from removing
the of_gpio consumer interfaces.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Almost all gpio drivers include linux/gpio/driver.h, and other
files should not rely on includes from this header.
Remove the indirect include from here and include the correct
headers directly from where they are used.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lee Jones <lee@kernel.org>
There are only a handful of users of gpio_export() and
related functions.
As these are just wrappers around the modern gpiod_export()
helper, remove the wrappers and open-code the gpio_to_desc
in all callers to shrink the legacy API.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
