Recently, in commit 6735b4632d ("Fonts: Support FONT_EXTRA_WORDS macros
for built-in fonts"), we wrapped each of our built-in data buffers in a
`font_data` structure, in order to use the following macros on them, see
include/linux/font.h:
#define REFCOUNT(fd) (((int *)(fd))[-1])
#define FNTSIZE(fd) (((int *)(fd))[-2])
#define FNTCHARCNT(fd) (((int *)(fd))[-3])
#define FNTSUM(fd) (((int *)(fd))[-4])
#define FONT_EXTRA_WORDS 4
Do the same thing to our new 6x8 font. For built-in fonts, currently we
only use FNTSIZE(). Since this is only a temporary solution for an
out-of-bounds issue in the framebuffer layer (see commit 5af0864079
("fbcon: Fix global-out-of-bounds read in fbcon_get_font()")), all the
three other fields are intentionally set to zero in order to discourage
using these negative-indexing macros.
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/926453876c92caac34cba8545716a491754d04d5.1603037079.git.yepeilin.cs@gmail.com
Amlogic SoC devices report the following errors frequently causing excessive
dmesg log spam and early log rotataion, although the errors appear to be
harmless as everything works fine:
[ 7.202702] panfrost ffe40000.gpu: error powering up gpu L2
[ 7.203760] panfrost ffe40000.gpu: error powering up gpu shader
ARM staff have advised increasing the timeout values to eliminate the errors
in most normal scenarios, and testing with several different G31/G52 devices
shows 20000 to be a reliable value.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201008141738.13560-1-christianshewitt@gmail.com
The HVS FIFOs are currently assigned each time we have an atomic_check
for all the enabled CRTCs.
However, if we are running multiple outputs in parallel and we happen to
disable the first (by index) CRTC, we end up changing the assigned FIFO
of the second CRTC without disabling and reenabling the pixelvalve which
ends up in a stall and eventually a VBLANK timeout.
In order to fix this, we can create a special value for our assigned
channel to mark it as disabled, and if our CRTC already had an assigned
channel in its previous state, we keep on using it.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-2-maxime@cerno.tech
The current CRTC state reset hook in vc4 allocates a vc4_crtc_state
structure as a drm_crtc_state, and relies on the fact that vc4_crtc_state
embeds drm_crtc_state as its first member, and therefore can be safely
cast.
However, this is pretty fragile especially since there's no check for this
in place, and we're going to need to access vc4_crtc_state member at reset
so this looks like a good occasion to make it more robust.
Fixes: 6d6e500391 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-1-maxime@cerno.tech
The vc4 display engine has a first controller called the HVS that will
perform the composition of the planes. That HVS has 3 FIFOs and can
therefore compose planes for up to three outputs. The timings part is
generated through a component called the Pixel Valve, and the BCM2711 has 6
of them.
Thus, the HVS has some bits to control which FIFO gets output to which
Pixel Valve. The current code supports that muxing by looking at all the
CRTCs in a new DRM atomic state in atomic_check, and given the set of
constraints that we have, assigns FIFOs to CRTCs or reject the mode
entirely. The actual muxing will occur during atomic_commit.
However, that doesn't work if only a fraction of the CRTCs' state is
updated in that state, since it will ignore the CRTCs that are kept running
unmodified, and will thus unassign its associated FIFO, and later disable
it.
In order to make the code work as expected, let's pull the CRTC state of
all the enabled CRTC in our atomic_check so that we can operate on all the
running CRTCs, no matter whether they are affected by the new state or not.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917121623.42023-1-maxime@cerno.tech
Update kernel-doc line comments to fix warnings reported by make W=1.
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'glob' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'from_wq' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'extra' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'ctx' not described in 'ttm_shrink'
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391317/
Signed-off-by: Christian König <christian.koenig@amd.com>
To avoid having to create all the device and driver scaffolding we
just manually create and destroy a devres_group.
v2: Rebased
v3: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v4:
- Fix IS_ERR handling (Matt)
- Delete surplus put_device() in mock_device_release (intel-gfx-ci)
v5:
- do not switch to device_add - it breaks runtime pm in the tests and
with the devres_group_add/release no longer needed for automatic
cleanup (CI). Update commit message to match.
- print correct error in pr_err (Matt)
v6: Remove now unused err variable (CI).
v7: More warning fixes ...
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v3)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (v4)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200919134032.2488403-1-daniel.vetter@ffwll.ch
The ast HW cursor requires the primary plane and CRTC to display at
a valid mode and format. This is not the case while switching
display modes, which can lead to the screen turing permanently dark.
As a workaround, the ast driver now disables active planes while the
mode or format switch takes place. It also synchronizes with the vertical
refresh to give CRTC and planes some time to catch up on each other.
The active planes planes (primary or cursor) will be re-enabled by
each plane's atomic_update() function.
v3:
* move the logic into the CRTC's atomic_disable function
v2:
* move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
The atomic modesetting code tried to distinguish format changes from
full modesetting operations. But the implementation was buggy and the
format registers were often updated even for simple pageflips.
Fix this problem by handling format changes in the primary plane's
update function.
v3:
* program format in primary plane's update function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-2-tzimmermann@suse.de
The lcdif IP does not support a framebuffer pitch (stride) other than
framebuffer width. Check for equality and reject the framebuffer
otherwise.
This prevents a distorted picture when using 640x800 and running the
Mesa graphics stack. Mesa tries to use a cache aligned stride, which
leads at that particular resolution to width != stride. Currently
Mesa has no fallback behavior, but rejecting this configuration allows
userspace to handle the issue correctly.
Fixes: 45d59d7040 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch
