The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ,
add the missing bus_format. Add missing connector type and bus_flags
as well.
Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is
capable of both RGB 18bit/24bit panel, the current configuration uses
18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6.
Support for the 24bit mode would require another entry in panel-simple
with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which
is out of scope of this fix.
[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
Fixes: f8fa17ba81 ("drm/panel: simple: Add support for Innolux G121X1-L03")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de
The parameter name is 'sb' and not 'drm_scanout_buffer'.
It fixes the following warnings:
drivers/gpu/drm/drm_fb_dma_helper.c:166: warning: Excess function parameter 'drm_scanout_buffer' description in 'drm_fb_dma_get_scanout_buffer'
drivers/gpu/drm/drm_fb_dma_helper.c:166: warning: Function parameter or struct member 'sb' not described in 'drm_fb_dma_get_scanout_buffer'
drivers/gpu/drm/drm_fb_dma_helper.c:166: warning: Excess function parameter 'drm_scanout_buffer' description in 'drm_fb_dma_get_scanout_buffer'
Fixes: 879b3b6511 ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416090601.237286-1-jfalempe@redhat.com
crc checksums are used to validate the output. Normally they're part
of the actual display hardware but on virtual stack there's nothing
to automatically generate them.
Implement crc generation for the vmwgfx stack. This works only on
screen targets, where it's possibly to easily make sure that the
guest side contents of the surface matches the host sides output.
Just like the vblank support, crc generation can only be enabled via:
guestinfo.vmwgfx.vkms_enable = "TRUE"
option in the vmx file.
Makes IGT's kms_pipe_crc_basic pass and allows a huge number of other
IGT tests which require CRC generation of the output to actually run
on vmwgfx. Makes it possible to actually validate a lof of the kms and
drm functionality with vmwgfx.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-3-zack.rusin@broadcom.com
By default vmwgfx doesn't support vblanking or crc generation which
makes it impossible to use various IGT tests to validate vmwgfx.
Implement virtual kernel mode setting, which is mainly related to
simulated vblank support.
Code is very similar to amd's vkms and the vkms module itself, except
that it's integrated with vmwgfx three different output technologies -
legacy, screen object and screen targets.
Make IGT's kms_vblank pass on vmwgfx and allows a lot of other IGT
tests to run with vmwgfx.
Support for vkms needs to be manually enabled by adding:
guestinfo.vmwgfx.vkms_enable = "TRUE"
somewhere in the vmx file, otherwise it's off by default.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-2-zack.rusin@broadcom.com
On version 11 of the "drm/panic: Add a drm panic handler" series [1], Thomas
suggested to change the name of the function `drm_panic_gem_get_scanout_buffer`
to `drm_fb_dma_get_scanout_buffer` and this request was applied on version 12,
which is the version that landed [2]. Although the name of the function
changed on the C file, it didn't changed on the header file, leading to a
compilation error as such:
drivers/gpu/drm/imx/ipuv3/ipuv3-plane.c:780:24: error: use of undeclared
identifier 'drm_fb_dma_get_scanout_buffer'; did you mean 'drm_panic_gem_get_scanout_buffer'?
780 | .get_scanout_buffer = drm_fb_dma_get_scanout_buffer,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| drm_panic_gem_get_scanout_buffer
./include/drm/drm_fb_dma_helper.h:23:5: note: 'drm_panic_gem_get_scanout_buffer'
declared here
23 | int drm_panic_gem_get_scanout_buffer(struct drm_plane *plane,
| ^
1 error generated.
Fix the compilation error by changing `drm_panic_gem_get_scanout_buffer` to
`drm_fb_dma_get_scanout_buffer` on the header file.
Link: https://lore.kernel.org/dri-devel/20240328120638.468738-1-jfalempe@redhat.com/ [1]
Link: https://lore.kernel.org/dri-devel/aea2aa01-7f03-453b-8b30-8f4d90b1b47f@redhat.com/ [2]
Fixes: 879b3b6511 ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415151013.3210278-1-mcanal@igalia.com
Add support for the drm_panic module, which displays a message to
the screen when a kernel panic occurs.
v7
* Use drm_for_each_primary_visible_plane()
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-10-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the drm_panic module, which displays a user-friendly
message to the screen when a kernel panic occurs.
v7:
* use drm_panic_gem_get_scanout_buffer() helper
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions
v12:
* Rename drm_panic_gem_get_scanout_buffer to drm_fb_dma_get_scanout_buffer
(Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-9-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the drm_panic module, which displays a message to
the screen when a kernel panic occurs.
v5:
* Also check that the plane is visible and primary. (Thomas Zimmermann)
v7:
* use drm_for_each_primary_visible_plane()
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions (Thomas Zimmermann)
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-8-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the drm_panic module, which displays a user-friendly
message to the screen when a kernel panic occurs.
v8:
* Replace get_scanout_buffer() with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* Revert to using get_scanout_buffer() (Sima)
* move get_scanout_buffer() to plane helper functions (Thomas Zimmermann)
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-7-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was initialy done for imx6, but should work on most drivers
using drm_fb_dma_helper.
v8:
* Replace get_scanout_buffer() logic with drm_panic_set_buffer()
(Thomas Zimmermann)
v9:
* go back to get_scanout_buffer()
* move get_scanout_buffer() to plane helper functions
v12:
* Rename drm_panic_gem_get_scanout_buffer to drm_fb_dma_get_scanout_buffer
(Thomas Zimmermann)
* Remove the #ifdef CONFIG_DRM_PANIC, and build it unconditionnaly, as
it's a small function. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-6-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a debugfs file, so you can test drm_panic without freezing
your machine. This is unsafe, and should be enabled only for
developer or tester.
To display the drm_panic screen on the device 0:
echo 1 > /sys/kernel/debug/dri/0/drm_panic_plane_0
v9:
* Create a debugfs file for each plane in the device's debugfs
directory. This allows to test for each plane of each GPU
independently.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-5-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for the following formats:
DRM_FORMAT_RGB565
DRM_FORMAT_RGBA5551
DRM_FORMAT_XRGB1555
DRM_FORMAT_ARGB1555
DRM_FORMAT_RGB888
DRM_FORMAT_XRGB8888
DRM_FORMAT_ARGB8888
DRM_FORMAT_XBGR8888
DRM_FORMAT_XRGB2101010
DRM_FORMAT_ARGB2101010
v10:
* move and simplify the functions from the drm format helper to drm_panic
v12:
* Use array for map and pitch in struct drm_scanout_buffer
to support multi-planar format later. (Thomas Zimmermann)
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409163432.352518-4-jfalempe@redhat.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
