Add the SPMI regulator node in the PM8004 LSID5 (as there is where
it resides basically 99% of the times) and set the nodes to be
disabled by default, as not all boards have both or one of the
lsids specified in this generic pm8004 DT.
While at it, also add nice phandles to the lsids specified in this
DT to allow configuration in specific board dts in a more human
readable fashion.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20191031111645.34777-3-kholk11@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce a base dts for the Inforce 6640 Single Board Computer. This
initial commit boots to console on the uart and provides UFS and SD card
storage support.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Update the regulator names in db820c.dtsi to use the names from the
schematics, instead of the made up genric names.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pad all addresses in msm8996.dtsi to 8 digits, in order to make it
easier to ensure ordering when adding new nodes.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Rather than scattering pinctrl definitions in various files, merge the
nodes into db820c.dtsi to make it easier to navigate.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Prior refactoring have left a few root nodes scattered throughout
db820c.dtsi, group these at the top of the file.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As the definition of available PMICs and the names of their outputs are
board specifc move this to db820c.dtsi
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Supplies for the various components in the SoC depends on board layout,
so move the supply definitions to db820c.dtsi instead of carrying them
in the platform dtsi.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Instead of mimicing the structure of the platform, reference nodes by
their label in apq8096-db820c.dtsi. Add labels in msm8996.dtsi where
necessary.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The USB id pins and wlan regulator are not platform devices, so move
them out of /soc
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit f4a73f5e26 ("pinctrl: qcom: sc7180: Add new qup functions")
has landed which means that we absolutely need to use the proper names
for the pinmuxing for I2C/UART numbers 2, 4, 7, and 9. Let's do it.
For reference:
- If you get only one of this commit and the pinctrl commit then none
of I2C/UART 2, 4, 7, and 9 will work.
- If you get neither of these commits then I2C 2, 4, 7, and 9 will
work but not UART.
...but despite the above it should be fine for this commit to land in
the Qualcomm tree because sc7180.dtsi only exists there (it hasn't
made it to mainline).
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: ba3fc64963 ("arm64: dts: sc7180: Add qupv3_0 and qupv3_1")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191217130352.1.Id8562de45e8441cac34699047e25e7424281e9d4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It turns out that the wcn3990 can float the gpio lines during bootup, etc
which will result in the uart core thinking there is incoming data. This
results in the bluetooth stack getting garbage. By applying a bias to
match what wcn3990 would drive, the issue is corrected.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20191021161921.31825-1-jeffrey.l.hugo@gmail.com
[bjorn: Moved board specific pinctrl states to the end]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The bindings for the QMP PHY are truly strange. I believe (?) that
they may have originated because with PCIe each lane is treated as a
different PHY and the same PHY driver is used for a whole bunch of
things (incluidng PCIe).
In any case, now that we have "make dtbs_check", we find that having
the outer node named "phy" triggers the
"schemas/phy/phy-provider.yaml" schema, yelling about:
phy@88e9000: '#phy-cells' is a required property
Let's call the outer node the "phy-wrapper" and the inner node the
"phy" to make dtbs_check happy.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 0b766e7fe5 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191212113540.6.Iec10b23bb000186b36b8bacfb6789d8233de04a7@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Dragonboard-410c is able to act either as USB Host or Device.
The role can be determined at runtime via the USB_HS_ID pin which is
derived from the micro-usb port VBUS pin.
In Host role, SoC USB D+/D- are routed to the onboard USB 2.0 HUB.
In Device role, SoC USB D+/D- are routed to the USB 2.0 micro B port.
Routing is selected via USB_SW_SEL_PM gpio.
In device role USB HUB can be held in reset.
chipidea driver expects two extcon device pointers, one for the
EXTCON_USB event and one for the EXTCON_USB_HOST event. Since
the extcon-usb-gpio device is capable of generating both these
events, point two times to this extcon device.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1576083014-5842-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
QUSB2 PHY on msm8996 doesn't work well when autosuspend by
dwc3 core using USB2PHYCFG register is enabled. One of the
issue seen is that PHY driver reports PLL lock failure and
fails phy_init() if dwc3 core has USB2 PHY suspend enabled.
Fix this by using quirks to disable USB2 PHY LPM/suspend and
dwc3 core already takes care of explicitly suspending PHY
during suspend if quirks are specified.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Link: https://lore.kernel.org/r/20191209151501.26993-1-p.pisati@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
