For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Since the pci_dev is no longer held in the provate data, we can
also cleanup the detach a bit. Remove the IS_ENABLED() tests in
the detach. If the pci_dev is non NULL it's a PCI device otherwise
it's an ISA device. Using IS_ENABLED() to omit the code paths
makes the code a bit confusing and doesn't save much.
Since the pci_dev was the only thing in the private data, remove
the struct, and it's allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Since the pci_dev is no longer held in the provate data, we can
also cleanup the detach a bit. Remove the IS_ENABLED() tests in
the detach. If the pci_dev is non NULL it's a PCI device otherwise
it's an ISA device. Using IS_ENABLED() to omit the code paths
makes the code a bit confusing and doesn't save much.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Since the pci_dev is no longer held in the provate data, we can
also cleanup the detach a bit. Remove the IS_ENABLED() tests in
the detach. If the pci_dev is non NULL it's a PCI device otherwise
it's an ISA device. Using IS_ENABLED() to omit the code paths
makes the code a bit confusing and doesn't save much.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function and pass the
comedi_devconfig struct instead of pre-parsing out the bus/slot
information.
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Consolidate the dev_err messages when a pci device is not found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a couple local variables to make the tests more concise.
Reorder the tests to make the for() loop checking for a
matching boardtype quicker.
Drop the dev_dbg for a match. It's just add noise.
Reword the dev_err when no match is found.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a couple local variables to make the tests more concise.
Reorder the tests to make the for() loop checking for a
matching boardtype quicker.
Drop the dev_dbg message for a match. It's just add noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver creates a linked list of all the pci devices in
the system while it's looking for a match. It's only use is
to determine if a device is "free" to use. The pci_is_enabled()
helper can give us the same information. Use that instead and
remove the linked list.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_is_enabled() in the "find pci device" function to determine if
the found pci device is not in use and move the comedi_pci_enable() call
into the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Drop the printk error messages. They just add noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_is_enabled() in the "find pci device" function to determine if
the found pci device is not in use and move the comedi_pci_enable() call
into the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use for_each_pci_dev() instead of open-coding the loop using
pci_get_device().
Drop the printk error messages. They just add noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a wrapper for to_pci_dev() to allow the comedi_pci_drivers
to store the pci_dev pointer in the comedi_device hw_dev variable and
retrieve it easily.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbot <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below checkpatch error was fixed,
drivers/staging/cptm1217/cp_tm1217.h:5: ERROR: open brace '{' following struct go on the same line
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The memcpy_fromio() and memcpy_toio() functions use the __memcpy() function,
at least on x86. This function carries out transfers smaller than 32 bits as
multiple 8 bit transfers, causing a single (aligned) 16 bit transfer to be
split into 2 8 bit transfers which may not be supported by the target VME
device.
The commit 53059aa059 fixed this for the
ca91cx42, however this was not fixed for the tsi148 at the time. This patch
uses the same algorithm to fix the tsi148.
Reported-by: Daniel Lambert <daniel.lambert@clermont.in2p3.fr>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Decoding the binary trace w/ a different kernel might be troublesome
since we convert addresses to symbols. For kernels with minimal changes,
the mappings would probably match, but it's not guaranteed at all.
(But still we could convert the addresses by hand, since we do print
raw addresses.)
If we use modules, the symbols could be loaded at different addresses
from the previously booted kernel, and so this would also fail, but
there's nothing we can do about it.
Also, the binary data format that pstore/ram is using in its ringbuffer
may change between the kernels, so here we too must ensure that we're
running the same kernel.
So, there are two questions really:
1. How to compute the unique kernel tag;
2. Where to store it.
In this patch we're using LINUX_VERSION_CODE, just as hibernation
(suspend-to-disk) does. This way we are protecting from the kernel
version mismatch, making sure that we're running the same kernel
version and patch level. We could use CRC of a symbol table (as
suggested by Tony Luck), but for now let's not be that strict.
And as for storing, we are using a small trick here. Instead of
allocating a dedicated buffer for the tag (i.e. another prz), or
hacking ram_core routines to "reserve" some control data in the
buffer, we are just encoding the tag into the buffer signature
(and XOR'ing it with the actual signature value, so that buffers
not needing a tag can just pass zero, which will result into the
plain old PRZ signature).
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Tony Luck <tony.luck@intel.com>
Suggested-by: Colin Cross <ccross@android.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Headers should really include all the needed prototypes, types, defines
etc. to be self-contained. This is a long-standing issue, but apparently
the new tracing code unearthed it (SMP=n is also a prerequisite):
In file included from fs/pstore/internal.h:4:0,
from fs/pstore/ftrace.c:21:
include/linux/pstore.h:43:15: error: field ‘read_mutex’ has incomplete type
While at it, I also added the following:
linux/types.h -> size_t, phys_addr_t, uXX and friends
linux/spinlock.h -> spinlock_t
linux/errno.h -> Exxxx
linux/time.h -> struct timespec (struct passed by value)
struct module and rs_control forward declaration (passed via pointers).
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the ANSI/VITA 4.0-1995 (S2011) naming convention for the mezzanine or
daughter boards. They are called IP modules in the Standard.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a coding style issue. An else statement was
not on the same line as the preceding if statement's
closing brace.
Signed-off-by: Erik Jones <erik@ejnode.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
