Currently there are two places where the error return variable ret is
being assigned -ETIMEDOUT on timeout errors and this value is not
being returned. Fix this by returning -ETIMEDOUT rather than redundantly
assiging it to ret.
Addresses-Coverity: ("Unused value")
Fixes: 0b89fc0a36 ("spi: rockchip-sfc: add rockchip serial flash controller")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210818141051.36320-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following waring:
drivers/spi/spi-mxic.c: In function ‘mxic_spi_mem_exec_op’:
drivers/spi/spi-mxic.c:401:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (op->data.dir == SPI_MEM_DATA_IN)
^~
drivers/spi/spi-mxic.c:403:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
if (op->data.dtr)
^~
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw>
Link: https://lore.kernel.org/r/20210810142405.2221540-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For spi-pic32, this is probably not currently an issue but is still good to
fix though.
Fixes: 1bcb9f8ceb ("spi: spi-pic32: Add PIC32 SPI master driver")
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081727.19491-2-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Tegra SPI driver supports runtime PM, which controls the clock
enable state, but the clk is also enabled separately from the RPM
at the driver probe time, and thus, stays always on. Fix it.
Runtime PM now is always available on Tegra, hence there is no need to
check the RPM presence in the driver anymore. Remove these checks.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210731192731.5869-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch modified set_cs_timing parameter, no need pass in spi_delay
to set_cs_timing callback.
By the way, we modified the mediatek and tegra114 spi driver to fix build err.
In mediatek spi driver, We have support set absolute time not clk_count,
and call this function in prepare_message not user's API.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133746.6742-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series series of patches converts ep93xx to Common Clock Framework.
It consists of preparation patches to use clk_prepare_enable where it is
needed, instead of clk_enable used in ep93xx drivers prior to CCF and
a patch converting mach-ep93xx/clock.c to CCF.
Link: https://lore.kernel.org/patchwork/cover/1445563/
Link: https://lore.kernel.org/patchwork/patch/1435884/
v1->v2:
- added SoB
Alexander Sverdlin (7):
iio: ep93xx: Prepare clock before using it
spi: spi-ep93xx: Prepare clock before using it
Input: ep93xx_keypad: Prepare clock before using it
video: ep93xx: Prepare clock before using it
dmaengine: ep93xx: Prepare clock before using it
ASoC: cirrus: i2s: Prepare clock before using it
pwm: ep93xx: Prepare clock before using it
Nikita Shubin (1):
ep93xx: clock: convert in-place to COMMON_CLK
arch/arm/Kconfig | 2 +-
arch/arm/mach-ep93xx/clock.c | 975 ++++++++++++++-----------
arch/arm/mach-ep93xx/core.c | 2 +-
arch/arm/mach-ep93xx/soc.h | 42 +-
drivers/dma/ep93xx_dma.c | 6 +-
drivers/iio/adc/ep93xx_adc.c | 6 +-
drivers/input/keyboard/ep93xx_keypad.c | 4 +-
drivers/pwm/pwm-ep93xx.c | 12 +-
drivers/spi/spi-ep93xx.c | 4 +-
drivers/video/fbdev/ep93xx-fb.c | 4 +-
sound/soc/cirrus/ep93xx-i2s.c | 12 +-
11 files changed, 605 insertions(+), 464 deletions(-)
base-commit: 64376a981a0e2e57c46efa63197c2ebb7dab35df
--
2.26.2
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared ep93xx-spi.0
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_spi_prepare_hardware
__spi_pump_messages
__spi_sync
spi_sync
spi_sync_transfer.constprop.0
regmap_spi_write
_regmap_raw_write_impl
_regmap_bus_raw_write
_regmap_update_bits
regmap_update_bits_base
cs4271_component_probe
snd_soc_component_probe
soc_probe_component
snd_soc_bind_card
edb93xx_probe
...
spi_master spi0: failed to prepare transfer hardware: -108
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210726140001.24820-3-nikita.shubin@maquefel.me
Signed-off-by: Mark Brown <broonie@kernel.org>
The security restrictions on the FSI-attached SPI controllers have
been applied universally to all controllers, so the controller can no
longer transfer more than 8 bytes for one transfer. Refactor the driver
to remove the looping and support for larger transfers, and remove the
"restricted" compatible string, as all the controllers are now
considered restricted.
Eddie James (2):
spi: fsi: Reduce max transfer size to 8 bytes
dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible
.../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 1 -
drivers/spi/spi-fsi.c | 125 +++---------------
2 files changed, 22 insertions(+), 104 deletions(-)
--
2.27.0
The comment in setup_fifo_xfer() about setting the watermark wasn't
quite proper grammar and also stopped making sense around commit
6d66507d9b ("spi: spi-geni-qcom: Don't wait to start 1st transfer if
transmitting"). After that commit we actually start the transfer
_before_ the watermark interrupt comes.
I don't think the comment really has any value anymore. We've already
got a comment when we grab the spinlock saying that our interrupt can
come any time as a result of the things in the locked section. Let's
just remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210712085010.1.Ie3bb9f9d30d6475bb75251d32635194c1c72b9ee@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
This series contains fixes & cleanup mainly regarding fifo
and the way end of transfer triggered, when used with or
without DMA.
An additional patch cleans up the pm_runtime calls and another
one enables the autosuspend.
v2: - split pm_runtime fix patch into two
- correct revert commit subject line
Alain Volmat (6):
spi: stm32: fixes pm_runtime calls in probe/remove
spi: stm32: enable pm_runtime autosuspend
spi: stm32h7: fix full duplex irq handler handling
spi: stm32: Revert "properly handle 0 byte transfer"
spi: stm32h7: don't wait for EOT and flush fifo on disable
spi: stm32: finalize message either on dma callback or EOT
Amelie Delaunay (1):
spi: stm32h7: rework rx fifo read function
drivers/spi/spi-stm32.c | 146 +++++++++++++++++-----------------------
1 file changed, 61 insertions(+), 85 deletions(-)
--
2.25.1
This patch add no_need_unprepare support for spi, if spi src clk is
MAIN PLL, it can keep the clk_prepare and will not cause low power
issue. So we no need do clk_prepare/clk_unprepare in runtime pm,
and it will get better performance, because clk_prepare has called
mutex lock.
In the same way,
clk_get_rate also has called mutex lock, so we moved it to spi_probe.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210629100814.21402-1-mason.zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on the usage, it is necessary to perform the finalize
message operation either upon receiving the EOT interruption,
eiher upon receiving the DMA callback. Indeed, when relying
on DMA, even if the SPI EOT IT has been received, it is
necessary to wait for the end of the DMA RX transaction before
accessing to the data.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-8-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In nominal cases, disable is called as part of the unprepare_message,
after receiving a EOT and after receiving all data so it doesn't
make sense to check for EOT and empty the FIFO.
Moreover, at the end of the disable, the SPI is disable (SPE) leading
to clear of all internal FIFO, leaving the IP in a known status.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-7-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.
It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped. Refine the tests.
There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.
(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)
Fixes: 9a73f61bdb ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
