Back merge pdx86 fixes into pdx86/for-next for further WMI work
depending on some of the fixes.
platform-drivers-x86 for v6.7-3
Highlights:
- asus-wmi: Solve i8042 filter resource handling, input, and
suspend issues
- wmi: Skip zero instance WMI blocks to avoid issues with
some laptops
- mlxbf-bootctl: Differentiate dev/production keys
- platform/surface: Correct serdev related return value to avoid
leaking errno into userspace
- Error checking fixes
The following is an automated shortlog grouped by driver:
asus-wmi:
- Change q500a_i8042_filter() into a generic i8042-filter
- disable USB0 hub on ROG Ally before suspend
- Filter Volume key presses if also reported via atkbd
- Move i8042 filter install to shared asus-wmi code
mellanox:
- Add null pointer checks for devm_kasprintf()
- Check devm_hwmon_device_register_with_groups() return value
mlxbf-bootctl:
- correctly identify secure boot with development keys
surface: aggregator:
- fix recv_buf() return value
wmi:
- Skip blocks with zero instances
Modify the external interface tpmi_get_feature_status() to get read
and write blocked instead of locked and disabled. Since auxiliary device
is not created when disabled, no use of returning disabled state. Also
locked state is not useful as feature driver can't use locked state
in a meaningful way.
Using read and write state, feature driver can decide which operations
to restrict for that feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231204221740.3645130-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a6b074b7ee37f3682da4b3f39ea40af97add64c2.1701726190.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/639b9ffc18422fe59125893bd7909e8a73cffb72.1701726190.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In preparation for exporting an API to register Intel Vendor Specific
Extended Capabilities (VSEC) from other drivers, remove the pointer to
platform_info from intel_vsec_device. This prevents a potential page fault
when auxiliary drivers probe and attempt to dereference this pointer to
access the needed quirks field. Instead, just add the quirks to
intel_vsec_device.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-5-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery
support to Intel PMT") added an xarray to track the list of vsec devices to
be recovered after a PCI error. But it did not provide cleanup for the list
leading to a memory leak that was caught by kmemleak. Do xa_alloc() before
devm_add_action_or_reset() so that the list may be cleaned up with
xa_erase() in the release function.
Fixes: 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-2-david.e.box@linux.intel.com
[hdegoede@redhat.com: Add missing xa_erase() on error-exit
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The secure boot state of the BlueField SoC is represented by two bits:
0 = production state
1 = secure boot enabled
2 = non-secure (secure boot disabled)
3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).
The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.
Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.
Fixes: 79e29cb8fb ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
"select ACPI_VIDEO" cause recursive dependency when "depends on HWMON"
is added:
drivers/hwmon/Kconfig:6:error: recursive dependency detected!
drivers/hwmon/Kconfig:6: symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:326: symbol EEEPC_LAPTOP depends on ACPI_VIDEO
drivers/acpi/Kconfig:208: symbol ACPI_VIDEO is selected by ACER_WMI
drivers/platform/x86/Kconfig:173: symbol ACER_WMI depends on HWMON
Replace the select with depends on to avoid this problem when the next
patch in this series adds "depends on HWMON".
There is a stub defined for the used acpi_video_get_backlight_type()
function when ACPI_VIDEO is not set, so use:
depends on ACPI_VIDEO || ACPI_VIDEO = n
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-4-onenowy@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Acer Predator PHN16-71 has the mode key that is used to rotate thermal
modes or toggle turbo mode with predator sense app (ver. 4) on windows.
This patch includes platform profile and the mode key support for the
device and also includes a small fix for "WMI_gaming_execute_u64"
function.
Signed-off-by: SungHwan Jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20231124094122.100707-2-onenowy@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ASUS have worked around an issue in XInput where it doesn't support USB
selective suspend, which causes suspend issues in Windows. They worked
around this by adjusting the MCU firmware to disable the USB0 hub when
the screen is switched off during the Microsoft DSM suspend path in ACPI.
The issue we have with this however is one of timing - the call the tells
the MCU to this isn't able to complete before suspend is done so we call
this in a prepare() and add a small msleep() to ensure it is done. This
must be done before the screen is switched off to prevent a variety of
possible races.
Further to this the MCU powersave option must also be disabled as it can
cause a number of issues such as:
- unreliable resume connection of N-Key
- complete loss of N-Key if the power is plugged in while suspended
Disabling the powersave option prevents this.
Without this the MCU is unable to initialise itself correctly on resume.
Signed-off-by: "Luke D. Jones" <luke@ljones.dev>
Tested-by: Philip Mueller <philm@manjaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231126230521.125708-2-luke@ljones.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Change asus_q500a_i8042_filter() into a generic i8042-filter,
using a new filter_i8042_e1_extended_codes flag in the quirks struct
to decide if e1 extended codes should be filtered out or not.
This is a preparation patch for adding support for filtering volume key
events being reported twice through both the PS/2 keyboard and asus-wmi.
Note while modifying the code also drop the unnecessary unlikely()
annotations, this is not in a hot path so those are not necessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231120154235.610808-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix the maximum brightness being much too low on the Yoga Tab 3 Pro.
The LP8557 backlight controller can either be configured to multiply its
PWM input and the I2C register set level (requiring both to be at 100%
for 100% output); or to only take the I2C register set level into account.
Multiplying the 2 levels is useful because this will turn off the backlight
when the panel goes off and turns off its PWM output.
But on the YT3-X90F the panel's PWM output defaults to a duty-cycle of much
less then 100%, severely limiting max brightness. In this case the LP8557
should be configured to only take the I2C register into account and
the i915 driver must turn off the backlight separately using a VBT MIPI
sequence to turn off the backlight.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231104205828.63139-4-hdegoede@redhat.com
