This clarifies the rules for min()/max()/clamp() type checking and makes
them a much more efficient macro expansion.
In particular, we now look at the type and range of the inputs to see
whether they work together, generating a mask of acceptable comparisons,
and then just verifying that the inputs have a shared case:
- an expression with a signed type can be used for
(1) signed comparisons
(2) unsigned comparisons if it is statically known to have a
non-negative value
- an expression with an unsigned type can be used for
(3) unsigned comparison
(4) signed comparisons if the type is smaller than 'int' and thus
the C integer promotion rules will make it signed anyway
Here rule (1) and (3) are obvious, and rule (2) is important in order to
allow obvious trivial constants to be used together with unsigned
values.
Rule (4) is not necessarily a good idea, but matches what we used to do,
and we have extant cases of this situation in the kernel. Notably with
bcachefs having an expression like
min(bch2_bucket_sectors_dirty(a), ca->mi.bucket_size)
where bch2_bucket_sectors_dirty() returns an 's64', and
'ca->mi.bucket_size' is of type 'u16'.
Technically that bcachefs comparison is clearly sensible on a C type
level, because the 'u16' will go through the normal C integer promotion,
and become 'int', and then we're comparing two signed values and
everything looks sane.
However, it's not entirely clear that a 'min(s64,u16)' operation makes a
lot of conceptual sense, and it's possible that we will remove rule (4).
After all, the _reason_ we have these complicated type checks is exactly
that the C type promotion rules are not very intuitive.
But at least for now the rule is in place for backwards compatibility.
Also note that rule (2) existed before, but is hugely relaxed by this
commit. It used to be true only for the simplest compile-time
non-negative integer constants. The new macro model will allow cases
where the compiler can trivially see that an expression is non-negative
even if it isn't necessarily a constant.
For example, the amdgpu driver does
min_t(size_t, sizeof(fru_info->serial), pia[addr] & 0x3F));
because our old 'min()' macro would see that 'pia[addr] & 0x3F' is of
type 'int' and clearly not a C constant expression, so doing a 'min()'
with a 'size_t' is a signedness violation.
Our new 'min()' macro still sees that 'pia[addr] & 0x3F' is of type
'int', but is smart enough to also see that it is clearly non-negative,
and thus would allow that case without any complaints.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For some reason I didn't see this issue on my arm64 or x86-64 builds,
but Stephen Rothwell reports that commit 2accfdb7ef ("profiling:
attempt to remove per-cpu profile flip buffer") left these static
variables around, and the powerpc build is unhappy about them:
kernel/profile.c:52:28: warning: 'cpu_profile_flip' defined but not used [-Wunused-variable]
52 | static DEFINE_PER_CPU(int, cpu_profile_flip);
| ^~~~~~~~~~~~~~~~
..
So remove these stale left-over remnants too.
Fixes: 2accfdb7ef ("profiling: attempt to remove per-cpu profile flip buffer")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull HID fixes from Benjamin Tissoires:
- fixes for HID-BPF after the merge with the bpf tree (Arnd Bergmann
and Benjamin Tissoires)
- some tool type fix for the Wacom driver (Tatsunosuke Tobita)
- a reorder of the sensor discovery to ensure the HID AMD SFH is
removed when no sensors are available (Basavaraj Natikar)
* tag 'for-linus-2024072901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: add test for attaching multiple time the same struct_ops
HID: bpf: prevent the same struct_ops to be attached more than once
selftests/hid: disable struct_ops auto-attach
selftests/hid: fix bpf_wq new API
HID: amd_sfh: Move sensor discovery before HID device initialization
hid: bpf: add BPF_JIT dependency
HID: wacom: more appropriate tool type categorization
HID: wacom: Modify pen IDs
Pull virtio fixes from Michael Tsirkin:
"The biggest thing here is the adminq change - but it looks like the
only way to avoid headq blocking causing indefinite stalls.
This fixes three issues:
- Prevent admin commands on one VF blocking another.
This prevents a bad VF from blocking a good one, as well as fixing
a scalability issue with large # of VFs
- Correctly return error on command failure on octeon. We used to
treat failed commands as a success.
- Fix modpost warning when building virtio_dma_buf. Harmless, but the
fix is trivial"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci_modern: remove admin queue serialization lock
virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result
virtio_pci_modern: pass cmd as an identification token
virtio_pci_modern: create admin queue of queried size
virtio: create admin queues alongside other virtqueues
virtio_pci: pass vq info as an argument to vp_setup_vq()
virtio: push out code to vp_avq_index()
virtio_pci_modern: treat vp_dev->admin_vq.info.vq pointer as static
virtio_pci: introduce vector allocation fallback for slow path virtqueues
virtio_pci: pass vector policy enum to vp_find_one_vq_msix()
virtio_pci: pass vector policy enum to vp_find_vqs_msix()
virtio_pci: simplify vp_request_msix_vectors() call a bit
virtio_pci: push out single vq find code to vp_find_one_vq_msix()
vdpa/octeon_ep: Fix error code in octep_process_mbox()
virtio: add missing MODULE_DESCRIPTION() macro
The TWA_NMI_CURRENT handling very much depends on IRQ_WORK, but that
isn't universally enabled everywhere.
Maybe the IRQ_WORK infrastructure should just be unconditional - x86
ends up indirectly enabling it through unconditionally enabling
PERF_EVENTS, for example. But it also gets enabled by having SMP
support, or even if you just have PRINTK enabled.
But in the meantime TWA_NMI_CURRENT causes tons of build failures on
various odd minimal configs. Which did show up in linux-next, but
despite that nobody bothered to fix it or even inform me until -rc1 was
out.
Fixes: 466e4d801c ("task_work: Add TWA_NMI_CURRENT as an additional notify mode")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the really old legacy kernel profiling code, which has long
since been obviated by "real profiling" (ie 'prof' and company), and
mainly remains as a source of syzbot reports.
There are anecdotal reports that people still use it for boot-time
profiling, but it's unlikely that such use would care about the old NUMA
optimizations in this code from 2004 (commit ad02973d42: "profile: 512x
Altix timer interrupt livelock fix" in the BK import archive at [1])
So in order to head off future syzbot reports, let's try to simplify
this code and get rid of the per-cpu profile buffers that are quite a
large portion of the complexity footprint of this thing (including CPU
hotplug callbacks etc).
It's unlikely anybody will actually notice, or possibly, as Thomas put
it: "Only people who indulge in nostalgia will notice :)".
That said, if it turns out that this code is actually actively used by
somebody, we can always revert this removal. Thus the "attempt" in the
summary line.
[ Note: in a small nod to "the profiling code can cause NUMA problems",
this also removes the "increment the last entry in the profiling array
on any unknown hits" logic. That would account any program counter in
a module to that single counter location, and might exacerbate any
NUMA cacheline bouncing issues ]
Link: https://lore.kernel.org/all/CAHk-=wgs52BxT4Zjmjz8aNvHWKxf5_ThBY4bYL1Y6CTaNL2dTw@mail.gmail.com/
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1]
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
syzbot is reporting uninit-value at profile_hits(), for there is a race
window between
if (!alloc_cpumask_var(&prof_cpu_mask, GFP_KERNEL))
return -ENOMEM;
cpumask_copy(prof_cpu_mask, cpu_possible_mask);
in profile_init() and
cpumask_available(prof_cpu_mask) &&
cpumask_test_cpu(smp_processor_id(), prof_cpu_mask))
in profile_tick(); prof_cpu_mask remains uninitialzed until cpumask_copy()
completes while cpumask_available(prof_cpu_mask) returns true as soon as
alloc_cpumask_var(&prof_cpu_mask) completes.
We could replace alloc_cpumask_var() with zalloc_cpumask_var() and
call cpumask_copy() from create_proc_profile() on only UP kernels, for
profile_online_cpu() calls cpumask_set_cpu() as needed via
cpuhp_setup_state(CPUHP_AP_ONLINE_DYN) on SMP kernels. But this patch
removes prof_cpu_mask because it seems unnecessary.
The cpumask_test_cpu(smp_processor_id(), prof_cpu_mask) test
in profile_tick() is likely always true due to
a CPU cannot call profile_tick() if that CPU is offline
and
cpumask_set_cpu(cpu, prof_cpu_mask) is called when that CPU becomes
online and cpumask_clear_cpu(cpu, prof_cpu_mask) is called when that
CPU becomes offline
. This test could be false during transition between online and offline.
But according to include/linux/cpuhotplug.h , CPUHP_PROFILE_PREPARE
belongs to PREPARE section, which means that the CPU subjected to
profile_dead_cpu() cannot be inside profile_tick() (i.e. no risk of
use-after-free bug) because interrupt for that CPU is disabled during
PREPARE section. Therefore, this test is guaranteed to be true, and
can be removed. (Since profile_hits() checks prof_buffer != NULL, we
don't need to check prof_buffer != NULL here unless get_irq_regs() or
user_mode() is such slow that we want to avoid when prof_buffer == NULL).
do_profile_hits() is called from profile_tick() from timer interrupt
only if cpumask_test_cpu(smp_processor_id(), prof_cpu_mask) is true and
prof_buffer is not NULL. But syzbot is also reporting that sometimes
do_profile_hits() is called while current thread is still doing vzalloc(),
where prof_buffer must be NULL at this moment. This indicates that multiple
threads concurrently tried to write to /sys/kernel/profiling interface,
which caused that somebody else try to re-allocate prof_buffer despite
somebody has already allocated prof_buffer. Fix this by using
serialization.
Reported-by: syzbot <syzbot+b1a83ab2a9eb9321fbdd@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=b1a83ab2a9eb9321fbdd
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+b1a83ab2a9eb9321fbdd@syzkaller.appspotmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM updates from Russell King:
- ftrace: don't assume stack frames are contiguous in memory
- remove unused mod_inwind_map structure
- spelling fixes
- allow use of LD dead code/data elimination
- fix callchain_trace() return value
- add support for stackleak gcc plugin
- correct some reset asm function prototypes for CFI
[ Missed the merge window because Russell forgot to push out ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
ARM: 9407/1: Add support for STACKLEAK gcc plugin
ARM: 9406/1: Fix callchain_trace() return value
ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
ARM: 9400/1: Remove unused struct 'mod_unwind_map'
Now that we no longer have any C constant expression contexts (ie array
size declarations or static initializers) that use min() or max(), we
can simpify the implementation by not having to worry about the result
staying as a C constant expression.
So now we can unconditionally just use temporary variables of the right
type, and get rid of the excessive expansion that used to come from the
use of
__builtin_choose_expr(__is_constexpr(...), ..
to pick the specialized code for constant expressions.
Another expansion simplification is to pass the temporary variables (in
addition to the original expression) to our __types_ok() macro. That
may superficially look like it complicates the macro, but when we only
want the type of the expression, expanding the temporary variable names
is much simpler and smaller than expanding the potentially complicated
original expression.
As a result, on my machine, doing a
$ time make drivers/staging/media/atomisp/pci/isp/kernels/ynr/ynr_1.0/ia_css_ynr.host.i
goes from
real 0m16.621s
user 0m15.360s
sys 0m1.221s
to
real 0m2.532s
user 0m2.091s
sys 0m0.452s
because the token expansion goes down dramatically.
In particular, the longest line expansion (which was line 71 of that
'ia_css_ynr.host.c' file) shrinks from 23,338kB (yes, 23MB for one
single line) to "just" 1,444kB (now "only" 1.4MB).
And yes, that line is still the line from hell, because it's doing
multiple levels of "min()/max()" expansion thanks to some of them being
hidden inside the uDIGIT_FITTING() macro.
Lorenzo has a nice cleanup patch that makes that driver use inline
functions instead of macros for sDIGIT_FITTING() and uDIGIT_FITTING(),
which will fix that line once and for all, but the 16-fold reduction in
this case does show why we need to simplify these helpers.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We only had a couple of array[] declarations, and changing them to just
use 'MAX()' instead of 'max()' fixes the issue.
This will allow us to simplify our min/max macros enormously, since they
can now unconditionally use temporary variables to avoid using the
argument values multiple times.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While working on simplifying the minmax functions, and avoiding
excessive macro expansion, it turns out that the sr.c use of the
'clamp()' macro has the arguments the wrong way around.
The clamp logic is
val = clamp(in, low, high);
and it returns the input clamped to the low/high limits. But sr.c ddid
speed = clamp(0, speed, 0xffff / 177);
which clamps the value '0' to the range '[speed, 0xffff / 177]' and ends
up being nonsensical.
Happily, I don't think anybody ever cared.
Fixes: 9fad9d560a ("scsi: sr: Fix unintentional arithmetic wraparound")
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3a7e02c040 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull UBI and UBIFS updates from Richard Weinberger:
- Many fixes for power-cut issues by Zhihao Cheng
- Another ubiblock error path fix
- ubiblock section mismatch fix
- Misc fixes all over the place
* tag 'ubifs-for-linus-6.11-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: Fix ubi_init() ubiblock_exit() section mismatch
ubifs: add check for crypto_shash_tfm_digest
ubifs: Fix inconsistent inode size when powercut happens during appendant writing
ubi: block: fix null-pointer-dereference in ubiblock_create()
ubifs: fix kernel-doc warnings
ubifs: correct UBIFS_DFS_DIR_LEN macro definition and improve code clarity
mtd: ubi: Restore missing cleanup on ubi_init() failure path
ubifs: dbg_orphan_check: Fix missed key type checking
ubifs: Fix unattached inode when powercut happens in creating
ubifs: Fix space leak when powercut happens in linking tmpfile
ubifs: Move ui->data initialization after initializing security
ubifs: Fix adding orphan entry twice for the same inode
ubifs: Remove insert_dead_orphan from replaying orphan process
Revert "ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path"
ubifs: Don't add xattr inode into orphan area
ubifs: Fix unattached xattr inode if powercut happens after deleting
mtd: ubi: avoid expensive do_div() on 32-bit machines
mtd: ubi: make ubi_class constant
ubi: eba: properly rollback inside self_check_eba
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0 ("x86: implement x86_32 stack protector")
Link: 6461e53781 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
Pull io_uring fixes from Jens Axboe:
- Fix a syzbot issue for the msg ring cache added in this release. No
ill effects from this one, but it did make KMSAN unhappy (me)
- Sanitize the NAPI timeout handling, by unifying the value handling
into all ktime_t rather than converting back and forth (Pavel)
- Fail NAPI registration for IOPOLL rings, it's not supported (Pavel)
- Fix a theoretical issue with ring polling and cancelations (Pavel)
- Various little cleanups and fixes (Pavel)
* tag 'io_uring-6.11-20240726' of git://git.kernel.dk/linux:
io_uring/napi: pass ktime to io_napi_adjust_timeout
io_uring/napi: use ktime in busy polling
io_uring/msg_ring: fix uninitialized use of target_req->flags
io_uring: align iowq and task request error handling
io_uring: kill REQ_F_CANCEL_SEQ
io_uring: simplify io_uring_cmd return
io_uring: fix io_match_task must_hold
io_uring: don't allow netpolling with SETUP_IOPOLL
io_uring: tighten task exit cancellations
Pull vfs fixes from Christian Brauner:
"This contains two fixes for this merge window:
VFS:
- I noticed that it is possible for a privileged user to mount most
filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's
namespace is recorded in fs_context->user_ns. If the returned file
descriptor is then passed to a process privileged in init_user_ns,
that process can call fsconfig(fd_fs, FSCONFIG_CMD_CREATE*),
creating a new superblock with sb->s_user_ns set to the namespace
of the process which called fsopen().
This is problematic as only filesystems that raise FS_USERNS_MOUNT
are known to be able to support a non-initial s_user_ns. Others may
suffer security issues, on-disk corruption or outright crash the
kernel. Prevent that by restricting such delegation to filesystems
that allow FS_USERNS_MOUNT.
Note, that this delegation requires a privileged process to
actually create the superblock so either the privileged process is
cooperaing or someone must have tricked a privileged process into
operating on a fscontext file descriptor whose origin it doesn't
know (a stupid idea).
The bug dates back to about 5 years afaict.
Misc:
- Fix hostfs parsing when the mount request comes in via the legacy
mount api.
In the legacy mount api hostfs allows to specify the host directory
mount without any key.
Restore that behavior"
* tag 'vfs-6.11-rc1.fixes.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
hostfs: fix the host directory parse when mounting.
fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
Pull apparmor updates from John Johansen:
"Cleanups
- optimization: try to avoid refing the label in apparmor_file_open
- remove useless static inline function is_deleted
- use kvfree_sensitive to free data->data
- fix typo in kernel doc
Bug fixes:
- unpack transition table if dfa is not present
- test: add MODULE_DESCRIPTION()
- take nosymfollow flag into account
- fix possible NULL pointer dereference
- fix null pointer deref when receiving skb during sock creation"
* tag 'apparmor-pr-2024-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: unpack transition table if dfa is not present
apparmor: try to avoid refing the label in apparmor_file_open
apparmor: test: add MODULE_DESCRIPTION()
apparmor: take nosymfollow flag into account
apparmor: fix possible NULL pointer dereference
apparmor: fix typo in kernel doc
apparmor: remove useless static inline function is_deleted
apparmor: use kvfree_sensitive to free data->data
apparmor: Fix null pointer deref when receiving skb during sock creation
Pull landlock fix from Mickaël Salaün:
"Jann Horn reported a sandbox bypass for Landlock. This includes the
fix and new tests. This should be backported"
* tag 'landlock-6.11-rc1-houdini-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add cred_transfer test
landlock: Don't lose track of restrictions on cred_transfer
Pull gpio fix from Bartosz Golaszewski:
- don't use sprintf() with non-constant format string
* tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: avoid non-constant format string
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
Pull iommu fixes from Will Deacon:
"We're still resolving a regression with the handling of unexpected
page faults on SMMUv3, but we're not quite there with a fix yet.
- Fix NULL dereference when freeing domain in Unisoc SPRD driver
- Separate assignment statements with semicolons in AMD page-table
code
- Fix Tegra erratum workaround when the CPU is using 16KiB pages"
* tag 'iommu-fixes-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappings
iommu/amd: Convert comma to semicolon
iommu: sprd: Avoid NULL deref in sprd_iommu_hw_en
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
Pull spi fixes from Mark Brown:
"The bulk of this is a series of fixes for the microchip-core driver
mostly originating from one of their customers, I also applied an
additional patch adding support for controlling the word size which
came along with it since it's still the merge window and clearly had a
bunch of fairly thorough testing.
We also have a fix for the compatible used to bind spidev to the
BH2228FV"
* tag 'spi-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: add correct compatible for Rohm BH2228FV
dt-bindings: trivial-devices: fix Rohm BH2228FV compatible string
spi: microchip-core: add support for word sizes of 1 to 32 bits
spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer
spi: microchip-core: fix init function not setting the master and motorola modes
spi: microchip-core: only disable SPI controller when register value change requires it
spi: microchip-core: defer asserting chip select until just before write to TX FIFO
spi: microchip-core: fix the issues in the isr
Pull regulator fixes from Mark Brown:
"These two commits clean up the excessively loose dependencies for the
RZG2L USB VBCTRL regulator driver, ensuring it shouldn't prompt for
people who can't use it"
* tag 'regulator-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Further restrict RZG2L USB VBCTRL regulator dependencies
regulator: renesas-usb-vbus-regulator: Update the default
Pull regmap fix from Mark Brown:
"Arnd sent a workaround for a false positive warning which was showing
up with GCC 14.1"
* tag 'regmap-fix-v6.11-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: work around gcc-14.1 false-positive warning
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for the merge window to fix the build and boot
on some SoCs.
- Initialize struct clk_init_data in the TI da8xx-cfgchip driver so
that stack contents aren't used for things like clk flags leading
to unexpected behavior
- Don't leak stack contents in a debug print in the new Sophgo clk
driver
- Disable the new T-Head clk driver on 32-bit targets to fix the
build due to a division
- Fix Samsung Exynos4 fin_pll wreckage from the clkdev rework done
last cycle by using a struct clk_hw directly instead of a struct
clk consumer"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: fix getting Exynos4 fin_pll rate from external clocks
clk: T-Head: Disable on 32-bit Targets
clk: sophgo: clk-sg2042-pll: Fix uninitialized variable in debug output
clk: davinci: da8xx-cfgchip: Initialize clk_init_data before use
Pull i3c updates from Alexandre Belloni:
"This cycle, there are new features for the Designware controller and
fixes for the other IPs:
- dw: optional apb clock and power management support, IBI handling
fixes
- mipi-i3c-hci: IBI handling fixes
- svc: a few fixes"
* tag 'i3c/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
dt-bindings: i3c: add header for generic I3C flags
i3c: master: svc: Fix error code in svc_i3c_master_do_daa_locked()
i3c: master: Enhance i3c_bus_type visibility for device searching & event monitoring
i3c: dw: Add power management support
i3c: dw: Add some functions for reusability
i3c: dw: Save timing registers and other values
i3c: master: svc: Improve DAA STOP handle code logic
i3c: dw: Add optional apb clock
i3c: dw: Use new *_enabled clk API
dt-bindings: i3c: dw: Add apb clock binding
i3c: master: svc: Convert comma to semicolon
i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported value
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addresses
i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpers
i3c: dw: Remove ibi_capable property
i3c: dw: Fix IBI intr programming
i3c: dw: Fix clearing queue thld
i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1
i3c: master: svc: resend target address when get NACK
Pull thermal control fix from Rafael Wysocki:
"Prevent the thermal core from flooding the kernel log with useless
messages if thermal zone temperature can never be determined (or its
sensor has failed permanently) and make it finally give up and disable
defective thermal zones (Rafael Wysocki)"
* tag 'thermal-6.11-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Back off when polling thermal zones on errors
thermal: trip: Split thermal_zone_device_set_mode()
Pull misc hotfixes from Andrew Morton:
"11 hotfixes, 7 of which are cc:stable. 7 are MM, 4 are other"
* tag 'mm-hotfixes-stable-2024-07-26-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: handle inconsistent state in nilfs_btnode_create_block()
selftests/mm: skip test for non-LPA2 and non-LVA systems
mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()
mm: memcg: add cacheline padding after lruvec in mem_cgroup_per_node
alloc_tag: outline and export free_reserved_page()
decompress_bunzip2: fix rare decompression failure
mm/huge_memory: avoid PMD-size page cache if needed
mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines
mm: fix old/young bit handling in the faulting path
dt-bindings: arm: update James Clark's email address
MAINTAINERS: mailmap: update James Clark's email address
Pull timer migration updates from Thomas Gleixner:
"Fixes and minor updates for the timer migration code:
- Stop testing the group->parent pointer as it is not guaranteed to
be stable over a chain of operations by design.
This includes a warning which would be nice to have but it produces
false positives due to the racy nature of the check.
- Plug a race between CPUs going in and out of idle and a CPU hotplug
operation. The latter can create and connect a new hierarchy level
which is missed in the concurrent updates of CPUs which go into
idle. As a result the events of such a CPU might not be processed
and timers go stale.
Cure it by splitting the hotplug operation into a prepare and
online callback. The prepare callback is guaranteed to run on an
online and therefore active CPU. This CPU updates the hierarchy and
being online ensures that there is always at least one migrator
active which handles the modified hierarchy correctly when going
idle. The online callback which runs on the incoming CPU then just
marks the CPU active and brings it into operation.
- Improve tracing and polish the code further so it is more obvious
what's going on"
* tag 'timers-urgent-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix grammar in comment
timers/migration: Spare write when nothing changed
timers/migration: Rename childmask by groupmask to make naming more obvious
timers/migration: Read childmask and parent pointer in a single place
timers/migration: Use a single struct for hierarchy walk data
timers/migration: Improve tracing
timers/migration: Move hierarchy setup into cpuhotplug prepare callback
timers/migration: Do not rely always on group->parent
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
Pull xen fixes from Juergen Gross:
"Two fixes for issues introduced in this merge window:
- fix enhanced debugging in the Xen multicall handling
- two patches fixing a boot failure when running as dom0 in PVH mode"
* tag 'for-linus-6.11-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix memblock_reserve() usage on PVH
x86/xen: move xen_reserve_extra_memory()
xen: fix multicall debug data referencing
Christian noticed that it is possible for a privileged user to mount
most filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's namespace
is recorded in fs_context->user_ns. If the returned file descriptor is
then passed to a process priviliged in init_user_ns, that process can
call fsconfig(fd_fs, FSCONFIG_CMD_CREATE), creating a new superblock
with sb->s_user_ns set to the namespace of the process which called
fsopen().
This is problematic. We cannot assume that any filesystem which does not
set FS_USERNS_MOUNT has been written with a non-initial s_user_ns in
mind, increasing the risk for bugs and security issues.
Prevent this by returning EPERM from sget_fc() when FS_USERNS_MOUNT is
not set for the filesystem and a non-initial user namespace will be
used. sget() does not need to be updated as it always uses the user
namespace of the current context, or the initial user namespace if
SB_SUBMOUNT is set.
Fixes: cb50b348c7 ("convenience helpers: vfs_get_super() and sget_fc()")
Reported-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Link: https://lore.kernel.org/r/20240724-s_user_ns-fix-v1-1-895d07c94701@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In a commit 1d717123bb ("ALSA: firewire-lib: Avoid
-Wflex-array-member-not-at-end warning"), DEFINE_FLEX() macro was used to
handle variable length of array for header field in struct fw_iso_packet
structure. The usage of macro has a side effect that the designated
initializer assigns the count of array to the given field. Therefore
CIP_HEADER_QUADLETS (=2) is assigned to struct fw_iso_packet.header,
while the original designated initializer assigns zero to all fields.
With CIP_NO_HEADER flag, the change causes invalid length of header in
isochronous packet for 1394 OHCI IT context. This bug affects all of
devices supported by ALSA fireface driver; RME Fireface 400, 800, UCX, UFX,
and 802.
This commit fixes the bug by replacing it with the alternative version of
macro which corresponds no initializer.
Cc: stable@vger.kernel.org
Fixes: 1d717123bb ("ALSA: firewire-lib: Avoid -Wflex-array-member-not-at-end warning")
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/r/rrufondjeynlkx2lniot26ablsltnynfaq2gnqvbiso7ds32il@qk4r6xps7jh2/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240725155640.128442-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
