mt_set_mode() accepts 2 boolean switches indicating whether the device
(if it follows Windows Precision Touchpad specification) should report
hardware buttons and/or surface contacts. For a casual reader it is
completely not clear, as they look at the call site, which exact mode
is being requested.
Define report_mode enum and change mt_set_mode() to accept is as
an argument instead. This allows to write:
mt_set_modes(hdev, HID_LATENCY_NORMAL, TOUCHPAD_REPORT_ALL);
or
mt_set_modes(hdev, HID_LATENCY_HIGH, TOUCHPAD_REPORT_BUTTONS);
which makes intent much more clear.
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/Zx_hBvg5Qa3KU3ta@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This patch introduces the following changes:
- Adds OF match table.
- Hardcodes hid-report-addr in the driver rather than fetching it
from the device property.
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.
NOTE: these bindings are distinct from the bindings used with the
GT7986U when the chip is running I2C firmware. For some background,
see discussion on the mailing lists in the thread:
https://lore.kernel.org/r/20241018020815.3098263-2-charles.goodix@gmail.com
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is.
Fixes: 62c68e7cee ("HID: ensure timely release of driver-allocated resources")
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add `select RMI4_F3A` under `HID_RMI` in Kconfig to support buttons and GPIOs
on newer Synaptics HID RMI devices. Future devices will use F3A instead of F30,
but F30 is still selected for backward compatibility.
Signed-off-by: Vincent Huang <vincenth@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The tilt data contained in the Bluetooth packets of an Intuos Pro are
supposed to be interpreted as signed values. Simply casting the values
to type `char` is not guaranteed to work since it is implementation-
defined whether it is signed or unsigned. At least one user has noticed
the data being reported incorrectly on their system. To ensure that the
data is interpreted properly, we specifically cast to `signed char`
instead.
Link: https://github.com/linuxwacom/input-wacom/issues/445
Fixes: 4922cd26f0 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In some cases, the headset receiver will answer one of our requests with
garbage, or not at all. This is a problem when we only request battery
information once we've received a battery response, as we might never
get to request battery information again.
If the data from the receiver could not be parsed, and there's no
pending battery requests, schedule a new request.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Implement the hid get/set feature report function using a separate
address, rather than sharing an address with coordinate reporting, to
prevent feature events from being overwritten by coordinate events.
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Align with the i2c-hid driver by returning 0 instead of -EINVAL when
an empty response is received, ensuring that userspace programs utilizing
the hidraw node receive consistent return values.
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pull SoC fixes from Arnd Bergmann:
"Where the last set of fixes was mostly drivers, this time the
devicetree changes all come at once, targeting mostly the Rockchips,
Qualcomm and NXP platforms.
The Qualcomm bugfixes target the Snapdragon X Elite laptops,
specifically problems with PCIe and NVMe support to improve
reliability, and a boot regresion on msm8939.
Also for Snapdragon platforms, there are a number of correctness
changes in the several platform specific device drivers, but none of
these are as impactful.
On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
correcting individual entries in the devicetree that were incorrect
and causing the media, video, mmc and spi drivers to misbehave in
minor ways.
The Arm SCMI firmware driver gets fixes for a use-after-free bug and
for correctly parsing firmware information.
On the RISC-V side, there are three minor devicetree fixes for
starfive and sophgo, again addressing only minor mistakes. One device
driver patch fixes a problem with spurious interrupt handling"
* tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits)
firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
dt-bindings: firmware: arm,scmi: Add missing vendor string
riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
ARM: dts: rockchip: Fix the spi controller on rk3036
ARM: dts: rockchip: drop grf reference from rk3036 hdmi
ARM: dts: rockchip: fix rk3036 acodec node
arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
arm64: dts: qcom: x1e80100: Fix up BAR spaces
MAINTAINERS: invert Misc RISC-V SoC Support's pattern
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
...
Pull mmc fixes from Ulf Hansson:
- sdhci-pci-gli: A couple of fixes for low power mode on GL9767
* tag 'mmc-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9767: Fix low power mode in the SD Express process
mmc: sdhci-pci-gli: GL9767: Fix low power mode on the set clock function
Pull tpm fix from Jarkko Sakkinen:
"Fix a race condition between tpm_pm_suspend() and tpm_hwrng_read() (I
think for good now)"
* tag 'tpmdd-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Lock TPM chip in tpm_pm_suspend() first
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy
according, as this leaves window for tpm_hwrng_read() to be called while
the operation is in progress. The recent bug report gives also evidence of
this behaviour.
Aadress this by locking the TPM chip before checking any chip->flags both
in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED
check inside tpm_get_random() so that it will be always checked only when
the lock is reserved.
Cc: stable@vger.kernel.org # v6.4+
Fixes: 99d4645062 ("tpm: Prevent hwrng from activating during resume")
Reported-by: Mike Seo <mikeseohyungjin@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219383
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Mike Seo <mikeseohyungjin@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
Pull dmaengine fixes from Vinod Koul:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
* tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Set EOP for all TRs in cyclic BCDMA transfer
dmaengine: sh: rz-dmac: handle configs where one address is zero
Pull driver core revert from Greg KH:
"Here is a single driver core revert for 6.12-rc6. It reverts a change
that came in -rc1 that was supposed to resolve a reported problem, but
caused another one, so revert it for now so that we can get this all
worked out properly in 6.13.
The revert has been in linux-next all week with no reported issues"
* tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver core: Fix uevent_show() vs driver detach race"
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.12-rc6 that
have been sitting in my tree this week. Included in here are the
following:
- thunderbolt driver fixes for reported issues
- USB typec driver fixes
- xhci driver fixes for reported problems
- dwc2 driver revert for a broken change
- usb phy driver fix
- usbip tool fix
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: restrict SNK_WAIT_CAPABILITIES_TIMEOUT transitions to non self-powered devices
usb: phy: Fix API devm_usb_put_phy() can not release the phy
usb: typec: use cleanup facility for 'altmodes_node'
usb: typec: fix unreleased fwnode_handle in typec_port_register_altmodes()
usb: typec: qcom-pmic-typec: fix missing fwnode removal in error path
usb: typec: qcom-pmic-typec: use fwnode_handle_put() to release fwnodes
usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links
Revert "usb: dwc2: Skip clock gating on Broadcom SoCs"
xhci: Fix Link TRB DMA in command ring stopped completion event
xhci: Use pm_runtime_get to prevent RPM on unsupported systems
usbip: tools: Fix detach_port() invalid port error path
thunderbolt: Honor TMU requirements in the domain when setting TMU mode
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
Patch series "mm: multi-gen LRU: Have secondary MMUs participate in
MM_WALK".
Today, the MM_WALK capability causes MGLRU to clear the young bit from
PMDs and PTEs during the page table walk before eviction, but MGLRU does
not call the clear_young() MMU notifier in this case. By not calling this
notifier, the MM walk takes less time/CPU, but it causes pages that are
accessed mostly through KVM / secondary MMUs to appear younger than they
should be.
We do call the clear_young() notifier today, but only when attempting to
evict the page, so we end up clearing young/accessed information less
frequently for secondary MMUs than for mm PTEs, and therefore they appear
younger and are less likely to be evicted. Therefore, memory that is
*not* being accessed mostly by KVM will be evicted *more* frequently,
worsening performance.
ChromeOS observed a tab-open latency regression when enabling MGLRU with a
setup that involved running a VM:
Tab-open latency histogram (ms)
Version p50 mean p95 p99 max
base 1315 1198 2347 3454 10319
mglru 2559 1311 7399 12060 43758
fix 1119 926 2470 4211 6947
This series replaces the final non-selftest patchs from this series[1],
which introduced a similar change (and a new MMU notifier) with KVM
optimizations. I'll send a separate series (to Sean and Paolo) for the
KVM optimizations.
This series also makes proactive reclaim with MGLRU possible for KVM
memory. I have verified that this functions correctly with the selftest
from [1], but given that that test is a KVM selftest, I'll send it with
the rest of the KVM optimizations later. Andrew, let me know if you'd
like to take the test now anyway.
[1]: https://lore.kernel.org/linux-mm/20240926013506.860253-18-jthoughton@google.com/
This patch (of 2):
The removed stats, MM_LEAF_OLD and MM_NONLEAF_TOTAL, are not very helpful
and become more complicated to properly compute when adding
test/clear_young() notifiers in MGLRU's mm walk.
Link: https://lkml.kernel.org/r/20241019012940.3656292-1-jthoughton@google.com
Link: https://lkml.kernel.org/r/20241019012940.3656292-2-jthoughton@google.com
Fixes: bd74fdaea1 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull misc driver fixes from Greg KH:
"Here are some small char/misc/iio fixes for 6.12-rc6 that resolve
some reported issues. Included in here are the following:
- small IIO driver fixes for many reported issues
- mei driver fix for a suddenly much reported issue for an "old"
issue.
- MAINTAINERS update for a developer who has moved companies and
forgot to update their old entry.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: use kvmalloc for read buffer
MAINTAINERS: add netup_unidvb maintainer
iio: dac: Kconfig: Fix build error for ltc2664
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
docs: iio: ad7380: fix supply for ad7380-4
iio: adc: ad7380: fix supplies for ad7380-4
iio: adc: ad7380: add missing supplies
iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
iio: light: veml6030: fix microlux value calculation
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
Pull Kbuild fixes from Masahiro Yamada:
- Fix a memory leak in modpost
- Resolve build issues when cross-compiling RPM and Debian packages
- Fix another regression in Kconfig
- Fix incorrect MODULE_ALIAS() output in modpost
* tag 'kbuild-fixes-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host
modpost: fix acpi MODULE_DEVICE_TABLE built with mismatched endianness
kconfig: show sub-menu entries even if the prompt is hidden
kbuild: deb-pkg: add pkg.linux-upstream.nokerneldbg build profile
kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profile
kbuild: rpm-pkg: disable kernel-devel package when cross-compiling
sumversion: Fix a memory leak in get_src_version()
Pull x86 fix from Thomas Gleixner:
"A trivial compile test fix for x86:
When CONFIG_AMD_NB is not set a COMPILE_TEST of an AMD specific driver
fails due to a missing inline stub. Add the stub to cure it"
* tag 'x86-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
Pull timer fix from Thomas Gleixner:
"A single fix for posix CPU timers.
When a thread is cloned, the posix CPU timers are not inherited.
If the parent has a CPU timer armed the corresponding tick dependency
in the tasks tick_dep_mask is set and copied to the new thread, which
means the new thread and all decendants will prevent the system to go
into full NOHZ operation.
Clear the tick dependency mask in copy_process() to fix this"
* tag 'timers-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear TICK_DEP_BIT_POSIX_TIMER on clone
Pull scheduler fixes from Thomas Gleixner:
- Plug a race between pick_next_task_fair() and try_to_wake_up() where
both try to write to the same task, even though both paths hold a
runqueue lock, but obviously from different runqueues.
The problem is that the store to task::on_rq in __block_task() is
visible to try_to_wake_up() which assumes that the task is not
queued. Both sides then operate on the same task.
Cure it by rearranging __block_task() so the the store to task::on_rq
is the last operation on the task.
- Prevent a potential NULL pointer dereference in task_numa_work()
task_numa_work() iterates the VMAs of a process. A concurrent unmap
of the address space can result in a NULL pointer return from
vma_next() which is unchecked.
Add the missing NULL pointer check to prevent this.
- Operate on the correct scheduler policy in task_should_scx()
task_should_scx() returns true when a task should be handled by sched
EXT. It checks the tasks scheduling policy.
This fails when the check is done before a policy has been set.
Cure it by handing the policy into task_should_scx() so it operates
on the requested value.
- Add the missing handling of sched EXT in the delayed dequeue
mechanism. This was simply forgotten.
* tag 'sched-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/ext: Fix scx vs sched_delayed
sched: Pass correct scheduling policy to __setscheduler_class
sched/numa: Fix the potential null pointer dereference in task_numa_work()
sched: Fix pick_next_task_fair() vs try_to_wake_up() race
Pull perf fix from Thomas Gleixner:
"perf_event_clear_cpumask() uses list_for_each_entry_rcu() without
being in a RCU read side critical section, which triggers a
'suspicious RCU usage' warning.
It turns out that the list walk does not be RCU protected because the
write side lock is held in this context.
Change it to a regular list walk"
* tag 'perf-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix missing RCU reader protection in perf_event_clear_cpumask()
Pull irq fixes from Thomas Gleixner:
- Fix an off-by-one error in the failure path of msi_domain_alloc(),
which causes the cleanup loop to terminate early and leaking the
first allocated interrupt.
- Handle a corner case in GIC-V4 versus a lazily mapped Virtual
Processing Element (VPE). If the VPE has not been mapped because the
guest has not yet emitted a mapping command, then the set_affinity()
callback returns an error code, which causes the vCPU management to
fail.
Return success in this case without touching the hardware. This will
be done later when the guest issues the mapping command.
* tag 'irq-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v4: Correctly deal with set_affinity on lazily-mapped VPEs
genirq/msi: Fix off-by-one error in msi_domain_alloc()
When building a 64-bit kernel on a 32-bit build host, incorrect
input MODULE_ALIAS() entries may be generated.
For example, when compiling a 64-bit kernel with CONFIG_INPUT_MOUSEDEV=m
on a 64-bit build machine, you will get the correct output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*r*a*0,*1,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*r*a*0,*1,*18,*1C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*r*a*0,*1,*m*l*s*f*w*");
However, building the same kernel on a 32-bit machine results in
incorrect output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*130,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*16A,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*165,*r*a*0,*1,*18,*1C,*20,*21,*38,*3C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*130,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
A similar issue occurs with CONFIG_INPUT_JOYDEV=m. On a 64-bit build
machine, the output is:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*120,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*130,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*r*a*m*l*s*f*w*");
However, on a 32-bit machine, the output is incorrect:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*20,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*22,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*28,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*26,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*2E0,*r*a*m*l*s*f*w*");
When building a 64-bit kernel, BITS_PER_LONG is defined as 64. However,
on a 32-bit build machine, the constant 1L is a signed 32-bit value.
Left-shifting it beyond 32 bits causes wraparound, and shifting by 31
or 63 bits makes it a negative value.
The fix in commit e0e9263271 ("[PATCH] PATCH: 1 line 2.6.18 bugfix:
modpost-64bit-fix.patch") is incorrect; it only addresses cases where
a 64-bit kernel is built on a 64-bit build machine, overlooking cases
on a 32-bit build machine.
Using 1ULL ensures a 64-bit width on both 32-bit and 64-bit machines,
avoiding the wraparound issue.
Fixes: e0e9263271 ("[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_SATA_AHCI_PLATFORM=m, modpost outputs incorect acpi
MODULE_ALIAS() if the endianness of the target and the build machine
do not match.
When the endianness of the target kernel and the build machine match,
the output is correct:
$ grep 'MODULE_ALIAS("acpi' drivers/ata/ahci_platform.mod.c
MODULE_ALIAS("acpi*:APMC0D33:*");
MODULE_ALIAS("acpi*:010601:*");
However, when building a little-endian kernel on a big-endian machine
(or vice versa), the output is incorrect:
$ grep 'MODULE_ALIAS("acpi' drivers/ata/ahci_platform.mod.c
MODULE_ALIAS("acpi*:APMC0D33:*");
MODULE_ALIAS("acpi*:0601??:*");
The 'cls' and 'cls_msk' fields are 32-bit.
DEF_FIELD() must be used instead of DEF_FIELD_ADDR() to correctly handle
endianness of these 32-bit fields.
The check 'if (cls)' was unnecessary; it never became NULL, as it was
the pointer to 'symval' plus the offset to the 'cls' field.
Fixes: 26095a01d3 ("ACPI / scan: Add support for ACPI _CLS device matching")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit d469647baf ("Input: simplify event handling logic") introduced
code that would set handler->events() method to either
input_handler_events_filter() or input_handler_events_default() or
input_handler_events_null(), depending on the kind of input handler
(a filter or a regular one) we are dealing with. Unfortunately this
breaks cases when we try to re-register the same filter (as is the case
with sysrq handler): after initial registration the handler will have 2
event handling methods defined, and will run afoul of the check in
input_handler_check_methods():
input: input_handler_check_methods: only one event processing method can be defined (sysrq)
sysrq: Failed to register input handler, error -22
Fix this by adding handle_events() method to input_handle structure and
setting it up when registering a new input handle according to event
handling methods defined in associated input_handler structure, thus
avoiding modifying the input_handler structure.
Reported-by: "Ned T. Crigler" <crigler@gmail.com>
Reported-by: Christian Heusel <christian@heusel.eu>
Tested-by: "Ned T. Crigler" <crigler@gmail.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Fixes: d469647baf ("Input: simplify event handling logic")
Link: https://lore.kernel.org/r/Zx2iQp6csn42PJA7@xavtug
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull nfsd fixes from Chuck Lever:
- Fix two async COPY bugs found during NFS bake-a-thon
- Fix an svcrdma memory leak
* tag 'nfsd-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
rpcrdma: Always release the rpcrdma_device's xa_array
NFSD: Never decrement pending_async_copies on error
NFSD: Initialize struct nfsd4_copy earlier
Pull xfs fixes from Carlos Maiolino:
- fix a sysbot reported crash on filestreams
- Reduce cpu time spent searching for extents in a very fragmented FS
- Check for delayed allocations before setting extsize
* tag 'xfs-6.12-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: streamline xfs_filestream_pick_ag
xfs: fix finding a last resort AG in xfs_filestream_pick_ag
xfs: Reduce unnecessary searches when searching for the best extents
xfs: Check for delayed allocations before setting extsize
Pull Kselftest fixes from Shuah Khan:
- fix syntax error in frequency calculation arithmetic expression in
intel_pstate run.sh
- add missing cpupower dependency check intel_pstate run.sh
- fix idmap_mount_tree_invalid test failure due to incorrect argument
- fix watchdog-test run leaving the watchdog timer enabled causing
system reboot. With this fix, the test disables the watchdog timer
when it gets terminated with SIGTERM, SIGKILL, and SIGQUIT in
addition to SIGINT
* tag 'linux_kselftest-fixes-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/watchdog-test: Fix system accidentally reset after watchdog-test
selftests/intel_pstate: check if cpupower is installed
selftests/intel_pstate: fix operand expected error
selftests/mount_setattr: fix idmap_mount_tree_invalid failed to run
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Avoid build errors with old 'rustc's without LLVM patch version
(important since it impacts people that do not even enable Rust)
- Update LLVM version for 'HAVE_CFI_ICALL_NORMALIZE_INTEGERS' in
'depends on' condition (the fix was eventually backported rather
than land in LLVM 19)"
* tag 'rust-fixes-6.12-3' of https://github.com/Rust-for-Linux/linux:
cfi: tweak llvm version for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
kbuild: rust: avoid errors with old `rustc`s without LLVM patch version
