Change the BMON_CR register value back to its original state before
enabling, so that BMON does not continue to collect information
after being disabled.
Signed-off-by: Vered Yavniely <vered.yavniely@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
EFAULT is currently returned if less than requested user pages are
pinned. This value means a "bad address" which might be confusing to
the user, as the address of the given user memory is not necessarily
"bad".
Modify the return value to ENOMEM, as "out of memory" is more suitable
in this case.
Signed-off-by: Tomer Tayar <tomer.tayar@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
Currently it's only allowed for render and compute. Going forward we
want to enable it for more engine classes. Let the XE_LRC_FLAG_INDIRECT_CTX
flag (and thus gt_engine_needs_indirect_ctx()) be the deciding factor
for its availability.
While at it, add the missing const to rcs_funcs array. Since
CTX_INDIRECT_CTX_OFFSET_DEFAULT already matches the HW default and
gt_engine_needs_indirect_ctx() only ever enables it for rcs/ccs, there
is no change in behavior, it's only preparation for future use case.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-5-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Allow the user to specify commands to execute during a context restore.
Currently it's possible to parse 2 types of actions:
- cmd: the instructions are added as is to the bb
- reg: just use the address and value, without worrying about
encoding the right LRI instruction. This is possibly the most
useful use case, so added a dedicated action for that.
This also prepares for future BBs: mid context restore and rc6 context
restore that can re-use the same parsing functions.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-4-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
For a future configfs attribute, it's desirable to select by engine mask
only as the instance doesn't make sense.
Rename the function lookup_engine_mask() to lookup_engine_info() and
make it return the entry. This allows parse_engine() to still return an
item if the caller wants to allow parsing a class-only string like
"rcs", "bcs", "ccs", etc.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-2-306bddbc15da@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
On clients that utilize AMD_PRIVATE_COLOR properties for HDR support,
brightness sliders can include a hardware controlled portion and a
gamma-based portion. This is the case on the Steam Deck OLED when using
gamescope with Steam as a client.
When a user sets a brightness level while HDR is active, the gamma-based
portion and/or hardware portion are adjusted to achieve the desired
brightness. However, when a modeset takes place while the gamma-based
portion is in-use, restoring the hardware brightness level overrides the
user's overall brightness level and results in a mismatch between what
the slider reports and the display's current brightness.
To avoid overriding gamma-based brightness, only restore HW backlight
level after boot or resume. This ensures that the backlight level is
set correctly after the DC layer resets it while avoiding interference
with subsequent modesets.
Fixes: 7875afafba ("drm/amd/display: Fix brightness level not retained over reboot")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference.
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turned out that protecting the status of each bo_va with a
spinlock was just hiding problems instead of solving them.
Revert the whole approach, add a separate stats_lock and lockdep
assertions that the correct reservation lock is held all over the place.
This not only allows for better checks if a state transition is properly
protected by a lock, but also switching back to using list macros to
iterate over the state of lists protected by the dma_resv lock of the
root PD.
v2: re-add missing check
v3: split into two patches
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a debug filesystem node to disable late binding fw reload
during the system or runtime resume. This is intended for situations
where the late binding fw needs to be loaded from user mode,
perticularly for validation purpose.
Note that xe kmd doesn't participate in late binding flow from user
space. Binary loaded from the userspace will be lost upon entering to
D3 cold hence user space app need to handle this situation.
v2:
- s/(uval == 1) ? true : false/!!uval/ (Daniele)
v3:
- Refine the commit message (Daniele)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905154953.3974335-9-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Load late binding firmware
v2:
- s/EAGAIN/EBUSY/
- Flush worker in suspend and driver unload (Daniele)
v3:
- Use retry interval of 6s, in steps of 200ms, to allow
other OS components release MEI CL handle (Sasha)
v4:
- return -ENODEV if component not added (Daniele)
- parse and print status returned by csc
v5:
- Use payload to check firmware valid (Daniele)
- Obtain the RPM reference before scheduling the worker to
ensure the device remains awake until the worker completes
firmware loading (Rodrigo)
v6:
- In case of error donot re-attempt fw download (Daniele)
v7 (Rodrigo):
- Rename of mei structs and callback.
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905154953.3974335-6-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Search for late binding firmware binaries and populate the meta data of
firmware structures.
v2 (Daniele):
- drm_err if firmware size is more than max pay load size
- s/request_firmware/firmware_request_nowarn/ as firmware will
not be available for all possible cards
v3 (Daniele):
- init firmware from within xe_late_bind_init, propagate error
- switch late_bind_fw to array to handle multiple firmware types
v4 (Daniele):
- Alloc payload dynamically, fix nits
v6 (Daniele)
- %s/MAX_PAYLOAD_SIZE/XE_LB_MAX_PAYLOAD_SIZE/
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905154953.3974335-5-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Introduce xe_late_bind_fw to enable firmware loading for the devices,
such as the fan controller, during the driver probe. Typically,
firmware for such devices are part of IFWI flash image but can be
replaced at probe after OEM tuning.
This patch binds mei late binding component to enable firmware loading.
v2:
- Add devm_add_action_or_reset to remove the component (Daniele)
- Add INTEL_MEI_GSC check in xe_late_bind_init() (Daniele)
v3:
- Fail driver probe if late bind initialization fails,
add has_late_bind flag (Daniele)
v4:
- %s/I915_COMPONENT_LATE_BIND/INTEL_COMPONENT_LATE_BIND/
v6:
- rebased
v7:
- rebased
- In xe_late_bind_init, use drm_err when returning an error to
stop the probe (Lucas)
- Use imperative mode in commit message (Lucas)
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905154953.3974335-4-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Introduce a new MEI client driver to support Late Binding firmware
upload/update for Intel discrete graphics platforms.
Late Binding is a runtime firmware upload/update mechanism that allows
payloads, such as fan control and voltage regulator, to be securely
delivered and applied without requiring SPI flash updates or
system reboots. This driver enables the Xe graphics driver and other
user-space tools to push such firmware blobs to the authentication
firmware via the MEI interface.
The driver handles authentication, versioning, and communication
with the authentication firmware, which in turn coordinates with
the PUnit/PCODE to apply the payload.
This is a foundational component for enabling dynamic, secure,
and re-entrant configuration updates on platforms like Battlemage.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250905154953.3974335-3-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In S0i3, GFX state is retained, so it's preferrable to
preempt queues rather than unmapping them as the overhead
is lower.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: David Perry <david.perry@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check VF critical region before RAS poison injection to ensure that the
poison injection will not hit the VF critical region.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When in S0i3, the GFX state is retained, so all we need to do
is stop the runlist so GFX can enter gfxoff.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: David Perry <david.perry@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SRIOV guest send requet to host to check whether the poison
injection address is in VF critical region or not via mabox.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC has been the default for ~8 years now and supports
many things that the non-DC code does not (audio, DP MST, etc.).
No DCE 11.x IPs ever supported analog encoders so that is not
an issue. Finally drop this code.
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch npm data from system metrics table for smu_v13_0_12
v3: Remove intermittent type for npm data, remove node id check,
move npm caps check to npm_get_data function (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs node to expose node power limit for smu_v13_0_12
v2: Remove support check from visible function (Kevin)
v3: Update comments (Kevin)
Remove sysfs remove file, change format specifier
for sysfs_emit, use attribute_group.name (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs can't read BMG_PCIE_CAP(0x138340) register nor access PCODE
(already guarded by the info.skip_pcode flag) so we shouldn't
expose attributes that require any of them to avoid errors like:
[] xe 0000:03:00.1: [drm] Tile0: GT0: VF is trying to read an \
inaccessible register 0x138340+0x0
[] RIP: 0010:xe_gt_sriov_vf_read32+0x6c2/0x9a0 [xe]
[] Call Trace:
[] xe_mmio_read32+0x110/0x280 [xe]
[] auto_link_downgrade_capable_show+0x2e/0x70 [xe]
[] dev_attr_show+0x1a/0x70
[] sysfs_kf_seq_show+0xaa/0x120
[] kernfs_seq_show+0x41/0x60
Fixes: 0e414bf7ad ("drm/xe: Expose PCIe link downgrade attributes")
Fixes: cdc36b66cd ("drm/xe: Expose fan control and voltage regulator version")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250916170029.3313-2-michal.wajdeczko@intel.com
These changes should have no functional impact.
1. Correct typo of "operation"in macro range_debug().
2. Combine 2 spin_lock() call in xe_svm_garbage_collector() into 1.
3. Drop redundant preferred_region_is_vram check in
xe_svm_range_needs_migrate_to_vram().
4. Combine the devmem_possible check in xe_svm_handle_pagefault().
need_vram includes the IS_DGFX() check, so there is no change for
.devmem_only.
v2: revert !ctx.devmem_only change (Matt)
v3: rebase code and refine commit message.
v4: rebase code and refine commit message.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250911031405.1371812-2-shuicheng.lin@intel.com
DRM Rust changes for v6.18
Alloc
- Add BorrowedPage type and AsPageIter trait
- Implement Vmalloc::to_page() and VmallocPageIter
- Implement AsPageIter for VBox and VVec
DMA & Scatterlist
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and struct sg_table
DRM
- In the DRM GEM module, simplify overall use of generics, add
DriverFile type alias and drop Object::SIZE.
Nova (Core)
- Various register!() macro improvements (paving the way for lifting
it to common driver infrastructure)
- Minor VBios fixes and refactoring
- Minor firmware request refactoring
- Advance firmware boot stages; process Booter and patch its
signature, process GSP and GSP bootloader
- Switch development fimrware version to r570.144
- Add basic firmware bindings for r570.144
- Move GSP boot code to its own module
- Clean up and take advantage of pin-init features to store most of
the driver's private data within a single allocation
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Nova (DRM)
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Pin-Init
- Merge pin-init PR from Benno
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code
*/},` & make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via
a `let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Rust
- Various methods for AsBytes and FromBytes traits
Tyr
- Initial Rust driver skeleton for ARM Mali GPUs.
- It can power up the GPU, query for GPU metatdata through MMIO and
provide the metadata to userspace via DRM device IOCTL (struct
drm_panthor_dev_query).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://lore.kernel.org/r/DCUC4SY6SRBD.1ZLHAIQZOC6KG@kernel.org
Since the PXP start comes after __xe_exec_queue_init() has completed,
we need to cleanup what was done in that function in case of a PXP
start error.
__xe_exec_queue_init calls the submission backend init() function,
so we need to introduce an opposite for that. Unfortunately, while
we already have a fini() function pointer, it performs other
operations in addition to cleaning up what was done by the init().
Therefore, for clarity, the existing fini() has been renamed to
destroy(), while a new fini() has been added to only clean up what was
done by the init(), with the latter being called by the former (via
xe_exec_queue_fini).
Fixes: 72d479601d ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250909221240.3711023-3-daniele.ceraolospurio@intel.com
