Testcase stat_all_metrics.sh fails in powerpc:
98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
Testing BRU_STALL_CPI
Testing COMPLETION_STALL_CPI
----
Testing TOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'.
Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----
Based on above logs, we could see some of the hv-24x7 metric events
fails, and logs suggest to run the metric event with -a option. This
change happened after the commit a4b8cfcabb ("perf stat: Delay
metric parsing"), which delayed the metric parsing phase and now before
metric parsing phase perf tool identifies, whether target is system-wide
or not. With this change, perf_event_open will fails with workload
monitoring for uncore events as expected.
The perf all metric test case fails as some of the hv-24x7 metric events
may need bigger workload with system wide monitoring to get the data.
Fix this issue by changing current system wide check from true workload
to sleep 0.01 workload.
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
Fixes: a4b8cfcabb ("perf stat: Delay metric parsing")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Power10 Performance Monitoring Unit (PMU) provides events to understand
stall cycles of different pipeline stages. These events along with
completed instructions provides useful metrics for application tuning.
Patch implements the JSON changes to collect counter statistics to
present the high level CPI stall breakdown metrics. New metric group is
named as "CPI_STALL_RATIO" and this new metric group presents these
stall metrics:
- DISPATCHED_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completition stall cycles per insn )
To avoid multipling of events, PM_RUN_INST_CMPL event has been modified
to use PMC5(performance monitoring counter5) instead of PMC4. This
change is needed, since completion stall event is using PMC4.
Usage example:
./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>
Performance counter stats for 'workload':
63,056,817,982 PM_CMPL_STALL # 0.28 COMPLETION_STALL_CPI
1,743,988,038,896 PM_ISSUE_STALL # 7.73 ISSUE_STALL_CPI
225,597,495,030 PM_RUN_INST_CMPL # 6.18 DISPATCHED_CPI
# 37.48 EXECUTION_STALL_CPI
1,393,916,546,654 PM_DISP_STALL_CYC
8,455,376,836,463 PM_EXEC_STALL
"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230216061240.18067-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no good reason why we cannot synthesize "cycle" events from
Intel PT just as we can synthesize "instruction" events, in particular
when CYC packets are available. This enables using PT to getting much
more accurate cycle profiles than regular sampling (record -e cycles)
when the work last for very short periods (<10 ms). Thus, add support
for this, based off of the existing IPC calculation framework. The new
option to --itrace is "y" (for cYcles), as c was taken for calls. Cycle
and instruction events can be synthesized together, and are by default.
The only real caveat is that CYC packets are only emitted whenever some
other packet is, which in practice is when a branch instruction is
encountered (and not even all branches). Thus, even at no subsampling
(e.g. --itrace=y0ns), it is impossible to get more accuracy than a
single basic block, and all cycles spent executing that block will get
attributed to the branch instruction that ends the packet. Thus, one
cannot know whether the cycles came from e.g. a specific load, a
mispredicted branch, or something else. When subsampling (which is the
default), the cycle events will get smeared out even more, but will
still be generally useful to attribute cycle counts to functions.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220322082452.1429091-1-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many platforms have feature of adjacent cachelines prefetch, when it is
enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if
one is fetched to cache, the other one could likely be fetched too,
which sort of extends the cacheline size to double, thus the false
sharing could happens in adjacent cachelines.
0Day has captured performance changed related with this [1], and some
commercial software explicitly makes its hot global variables 128 bytes
aligned (2 cache lines) to avoid this kind of extended false sharing.
So add an option "--double-cl" for 'perf c2c report' to show false
sharing in double cache line granularity, which acts just like the
cacheline size is doubled. There is no change to c2c record. The
hardware events of shared cacheline are still per cacheline, and this
option just changes the granularity of how events are grouped and
displayed.
In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case
on old kernel):
----------------------------------------------------------------------
26 31 2 0 0 0 0xffff888103ec6000
----------------------------------------------------------------------
35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm
6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge
25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm
19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge
9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge
3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch
The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are
listed together to give users a hint of extended false sharing.
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Committer notes:
Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx
Removed -a, leaving just as --double-cl, as this probably is not used so
frequently and perhaps will be even auto-detected if we manage to record
the MSR where this is configured.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Joe Mario <jmario@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When --overwrite and --max-size options of perf record are used
together, a segmentation fault occurs. The following is an example:
# perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1
[ perf record: Woken up 1 times to write data ]
perf: Segmentation fault
Obtained 12 stack frames.
./perf/perf(+0x197673) [0x55f99710b673]
/lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f]
./perf/perf(+0x8eb40) [0x55f997002b40]
./perf/perf(+0x1f6882) [0x55f99716a882]
./perf/perf(+0x794c2) [0x55f996fed4c2]
./perf/perf(+0x7b7c7) [0x55f996fef7c7]
./perf/perf(+0x9074b) [0x55f99700474b]
./perf/perf(+0x12e23c) [0x55f9970a223c]
./perf/perf(+0x12e54a) [0x55f9970a254a]
./perf/perf(+0x7db60) [0x55f996ff1b60]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86]
./perf/perf(+0x7dfe9) [0x55f996ff1fe9]
Segmentation fault (core dumped)
backtrace of the core file is as follows:
(gdb) bt
#0 record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234
#1 record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242
#2 record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263
#3 process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618
#4 0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658,
from=from@entry=0) at util/synthetic-events.c:1895
#5 0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658)
at util/synthetic-events.c:1905
#6 0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997
#7 0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802
#8 0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258
#9 0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330
#10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384
#11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428
#12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562
The reason is that record__bytes_written accesses the freed memory rec->thread_data,
The process is as follows:
__cmd_record
-> record__free_thread_data
-> zfree(&rec->thread_data) // free rec->thread_data
-> record__synthesize
-> perf_event__synthesize_id_index
-> process_synthesized_event
-> record__write
-> record__bytes_written // access rec->thread_data
We add a member variable "thread_bytes_written" in the struct "record"
to save the data size written by the threads.
Fixes: 6d57581659 ("perf record: Add support for limit perf output file size")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I have downloaded linux-next and build the perf tool using
# make LIBPFM4=1
to have libpfm4 support built into perf. The build fails:
# make LIBPFM4=1
....
INSTALL libbpf_headers
CC util/pfm.o
util/pfm.c: In function ‘print_libpfm_event’:
util/pfm.c:189:9: error: too many arguments to function ‘print_cb->print_event’
189 | print_cb->print_event(print_state,
| ^~~~~~~~
util/pfm.c:220:25: error: too many arguments to function ‘print_cb->print_event’
220 | print_cb->print_event(print_state,
The build error is caused by commit d9dc8874d6 ("perf pmu-events:
Remove now unused event and metric variables") which changes the
function prototype of
struct print_callbacks {
...
void (*print_event)(...); --> last two parameters removed.
};
but does not adjust the usage of this function prototype in util/pfm.c.
In file util/pfm.c function print_event() is still invoked with 13
parameters instead of 11. The compile fails.
When I adjust the file util/pfm.c as in this patch, the build works file.
Please check this patch for correctness, I have just fixed the compile
issue.
Fixes: d9dc8874d6 ("perf pmu-events: Remove now unused event and metric variables")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: egorenar@linux.ibm.com
Cc: linux-kernel-next@vger.kernel.org
Link: https://lore.kernel.org/r/20230207140447.1827741-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there're many lock contentions in the system, people sometimes want
to know who caused the contention, IOW who's the owner of the locks.
The -o/--lock-owner option tries to follow the lock owners for the
contended mutexes and rwsems from BPF, and then attributes the
contention time to the owner instead of the waiter. It's a best effort
approach to get the owner info at the time of the contention and doesn't
guarantee to have the precise tracking of owners if it's changing over
time.
Currently it only handles mutex and rwsem that have owner field in their
struct and it basically points to a task_struct that owns the lock at
the moment.
Technically its type is atomic_long_t and it comes with some LSB bits
used for other meanings. So it needs to clear them when casting it to a
pointer to task_struct.
Also the atomic_long_t is a typedef of the atomic 32 or 64 bit types
depending on arch which is a wrapper struct for the counter value. I'm
not aware of proper ways to access those kernel atomic types from BPF so
I just read the internal counter value directly. Please let me know if
there's a better way.
When -o/--lock-owner option is used, it goes to the task aggregation
mode like -t/--threads option does. However it cannot get the owner for
other lock types like spinlock and sometimes even for mutex.
$ sudo ./perf lock con -abo -- ./perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 4.766 [sec]
4.766540 usecs/op
209795 ops/sec
contended total wait max wait avg wait pid owner
403 565.32 us 26.81 us 1.40 us -1 Unknown
4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe
1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe
1 2.03 us 2.03 us 2.03 us 5068 chrome
As you can see, the owner is unknown for the most cases. But if we
filter only for the mutex locks, it'd more likely get the onwers.
$ sudo ./perf lock con -abo -Y mutex -- ./perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 4.910 [sec]
4.910435 usecs/op
203647 ops/sec
contended total wait max wait avg wait pid owner
2 15.50 us 8.29 us 7.75 us 1582852 sched-pipe
7 7.20 us 2.47 us 1.03 us -1 Unknown
1 6.74 us 6.74 us 6.74 us 1582851 sched-pipe
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230207002403.63590-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf BPF filter test fails in environment where "kernel-debuginfo"
is not installed.
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : FAILED!
<<>>
Enabling verbose option provided debug logs, which says debuginfo
needs to be installed. Snippet of verbose logs:
<<>>
42.3: BPF prologue generation :
--- start ---
test child forked, pid 28218
<<>>
Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo
package.
bpf_probe: failed to convert perf probe events
Failed to add events selected by BPF
test child finished with -1
---- end ----
BPF filter subtest 3: FAILED!
<<>>
Here the subtest "BPF prologue generation" failed and logs shows
debuginfo is needed. After installing kernel-debuginfo package, testcase
passes.
The "BPF prologue generation" subtest failed because, the do_test()
returns TEST_FAIL without checking the error type returned by
parse_events_load_bpf_obj().
parse_events_load_bpf_obj() can also return error of type -ENODATA
incase kernel-debuginfo package is not installed. Fix this by adding
check for -ENODATA error.
Test result after the patch changes:
Test failure logs:
<<>>
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Skip (clang/debuginfo isn't installed or environment missing BPF support)
<<>>
Fixes: ba1fae431e ("perf test: Add 'perf test BPF'")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/linux-perf-users/Y7bIk77mdE4j8Jyi@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "bpf" tests fails in environment with missing libtraceevent support
as below:
# ./perf test 36
36: BPF filter :
36.1: Basic BPF filtering : FAILED!
36.2: BPF pinning : FAILED!
36.3: BPF prologue generation : FAILED!
The environment has clang but missing the libtraceevent devel. Hence
perf is compiled without libtraceevent support.
Detailed logs:
./perf test -v "Basic BPF filtering"
Failed to add BPF event syscalls:sys_enter_epoll_pwait
bpf: tracepoint call back failed, stop iterate
Failed to add events selected by BPF
The bpf tests tris to add probe event which fails at
"parse_events_add_tracepoint" function due to missing libtraceevent. Add
check for "HAVE_LIBTRACEEVENT" in the "tests/bpf.c" before proceeding
with the test.
With the change,
# ./perf test 36
36: BPF filter :
36.1: Basic BPF filtering : Skip (not compiled in or missing libtraceevent support)
36.2: BPF pinning : Skip (not compiled in or missing libtraceevent support)
36.3: BPF prologue generation : Skip (not compiled in or missing libtraceevent support)
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230131135001.54578-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull ELF fix from Al Viro:
"One of the many equivalent build warning fixes for !CONFIG_ELF_CORE
configs. Geert's is the earliest one I've been able to find"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
coredump: Move dump_emit_page() to kill unused warning
Pull USB fixes from Greg KH:
"Here are some small USB fixes that resolve some reported problems.
These include:
- gadget driver fixes
- dwc3 driver fix
- typec driver fix
- MAINTAINERS file update.
All of these have been in linux-next with no reported problems"
* tag 'usb-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Don't attempt to resume the ports before they exist
usb: gadget: udc: do not clear gadget driver.bus
usb: gadget: f_uac2: Fix incorrect increment of bNumEndpoints
usb: gadget: f_fs: Fix unbalanced spinlock in __ffs_ep0_queue_wait
usb: dwc3: qcom: enable vbus override when in OTG dr-mode
MAINTAINERS: Add myself as UVC Gadget Maintainer
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial and vt fixes. These include:
- 8250 driver fixes relating to dma issues
- stm32 serial driver fix for threaded irqs
- vc_screen bugfix for reported problems.
All have been in linux-next for a while with no reported problems"
* tag 'tty-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF
serial: 8250_dma: Fix DMA Rx rearm race
serial: 8250_dma: Fix DMA Rx completion race
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/whatever driver fixes. They
include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer)
All have been in linux-next with no reported problems"
* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
nvmem: qcom-spmi-sdam: fix module autoloading
nvmem: core: fix return value
nvmem: core: fix cell removal on error
nvmem: core: fix device node refcounting
nvmem: core: fix registration vs use race
nvmem: core: fix cleanup after dev_set_name()
nvmem: core: remove nvmem_config wp_gpio
nvmem: core: initialise nvmem->id early
nvmem: sunxi_sid: Always use 32-bit MMIO reads
nvmem: brcm_nvram: Add check for kzalloc
iio: imu: fxos8700: fix MAGN sensor scale and unit
iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
iio: imu: fxos8700: fix failed initialization ODR mode assignment
iio: imu: fxos8700: fix incorrect ODR mode readback
iio: light: cm32181: Fix PM support on system with 2 I2C resources
iio: hid: fix the retval in gyro_3d_capture_sample
iio: hid: fix the retval in accel_3d_capture_sample
iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
...
Pull fbdev fixes from Helge Deller:
- fix fbcon to prevent fonts bigger than 32x32 pixels to avoid
overflows reported by syzbot
- switch omapfb to use kstrtobool()
- switch some fbdev drivers to use the backlight helpers
* tag 'fbdev-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Check font dimension limits
fbdev: omapfb: Use kstrtobool() instead of strtobool()
fbdev: fbmon: fix function name in kernel-doc
fbdev: atmel_lcdfb: Rework backlight status updates
fbdev: riva: Use backlight helper
fbdev: omapfb: panel-dsi-cm: Use backlight helper
fbdev: nvidia: Use backlight helper
fbdev: mx3fb: Use backlight helper
fbdev: radeon: Use backlight helper
fbdev: atyfb: Use backlight helper
fbdev: aty128fb: Use backlight helper
Pull x86 fix from Borislav Petkov:
- Prevent the compiler from reordering accesses to debug regs which
could cause a #VC exception in SEV-ES guests at the wrong place in
the NMI handling path
* tag 'x86_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/debug: Fix stack recursion caused by wrongly ordered DR7 accesses
Pull perf fix from Borislav Petkov:
- Lock the proper critical section when dealing with perf event context
* tag 'perf_urgent_for_v6.2_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_event_pmu_context serialization
Pull powerpc fixes from Michael Ellerman:
"It's a bit of a big batch for rc6, but just because I didn't send any
fixes the last week or two while I was on vacation, next week should
be quieter:
- Fix a few objtool warnings since we recently enabled objtool.
- Fix a deadlock with the hash MMU vs perf record.
- Fix perf profiling of asynchronous interrupt handlers.
- Revert the IMC PMU nest_init_lock to being a mutex.
- Two commits fixing problems with the kexec_file FDT size
estimation.
- Two commits fixing problems with strict RWX vs kernels running at
non-zero.
- Reconnect tlb_flush() to hash__tlb_flush()
Thanks to Kajol Jain, Nicholas Piggin, Sachin Sant Sathvika Vasireddy,
and Sourabh Jain"
* tag 'powerpc-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()
powerpc/kexec_file: Count hot-pluggable memory in FDT estimate
powerpc/64s/radix: Fix RWX mapping with relocated kernel
powerpc/64s/radix: Fix crash with unaligned relocated kernel
powerpc/kexec_file: Fix division by zero in extra size estimation
powerpc/imc-pmu: Revert nest_init_lock to being a mutex
powerpc/64: Fix perf profiling asynchronous interrupt handlers
powerpc/64s: Fix local irq disable when PMIs are disabled
powerpc/kvm: Fix unannotated intra-function call warning
powerpc/85xx: Fix unannotated intra-function call warning
Pull RTC fixes from Alexandre Belloni:
"Here are a few fixes for 6.2. The EFI one is the most important as it
allows some RTCs to actually work. The other two are warnings that are
worth fixing.
- efi: make WAKEUP services optional
- sunplus: fix format string warning"
* tag 'rtc-6.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: sunplus: fix format string for printing resource
dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property
rtc: efi: Enable SET/GET WAKEUP services as optional
Pull Kbuild fixes from Masahiro Yamada:
- Fix two bugs (for building and for signing) when MODULE_SIG_KEY
contains a PKCS#11 URI
* tag 'kbuild-fixes-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: modinst: Fix build error when CONFIG_MODULE_SIG_KEY is a PKCS#11 URI
certs: Fix build error when PKCS#11 URI contains semicolon
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Yet another fix for non-CPU accesses to the memory backing the
VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW behaviour
after the fix that went in ealier in the cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Test read-only PT memory regions
KVM: selftests: aarch64: Fix check of dirty log PT write
KVM: selftests: aarch64: Do not default to dirty PTE pages on all S1PTWs
KVM: selftests: aarch64: Relax userfaultfd read vs. write checks
KVM: arm64: Allow no running vcpu on saving vgic3 pending table
KVM: arm64: Allow no running vcpu on restoring vgic3 LPI pending status
KVM: arm64: Add helper vgic_write_guest_lock()
Pull parisc architecture fixes from Helge Deller:
- Fix PTRACE_GETREGS/PTRACE_SETREGS for 32-bit userspace on a 64-bit
kernel
- pdc_iodc_print() dropped chars for newline in strings
- Drop constants in favour of PRIV_USER
- use safer strscpy() function in pdc_stable driver
* tag 'parisc-for-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
parisc: Replace hardcoded value with PRIV_USER constant in ptrace.c
parisc: Fix return code of pdc_iodc_print()
parisc: pdc_stable: use strscpy() to instead of strncpy()
Pull OpenRISC mailing list update from Stafford Horne:
"The old mailing list for OpenRISC died due to some infrastructure
issues and the people in charge decided not to keep it running. We
have migrated this and the users over to kernel.org infrastructure.
Sending this out now to avoid kernel developers getting lots of
bounced mails for using the old list"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: Update OpenRISC mailing list
KVM/arm64 fixes for 6.2, take #3
- Yet another fix for non-CPU accesses to the memory backing
the VGICv3 subsystem
- A set of fixes for the setlftest checking for the S1PTW
behaviour after the fix that went in ealier in the cycle
