[WHY]
New sequence for transparent mode DP1.x link training was provided by LTTPR
vendor
[HOW]
Implement new FIXED_VS sequence, increase LT retry count to minimize
any potential intermittent lightup failures
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
As MES KIQ is dequeued, tell RLC that KIQ is inactive
[How]
Clear the RLC_CP_SCHEDULERS Active bit which RLC checks KIQ status
In addition, driver can halt MES under SRIOV when unloading driver
v2:
Use scheduler0 mask to clear KIQ portion of RLC_CP_SCHEDULERS
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- On init if a display is connected, we need to maintain the DISPCLK
frequency
- Even though DPG_EN=1, the display still requires the correct
timing or it could cause audio corruption (if DISPCLK freq
is reduced)
- Read the current DISPCLK freq and request the same value to ensure
the timing is valid and unchanged
- However, add option to do a full pipe power down (including link)
which will also avoid audio related issues
- Disabled for the time being on dcn32
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When determining FPO support, include FPO + VActive support
- Support FPO + VActive if one display meets regular requirements
for FPO and the second display is able to switch in VACTIVE with
a given amount of margin
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In 2560x1600@240p eDP panel, driver use lowest voltage level
to play 1080p video cause underflow. According to HW SPEC,
the senario should use high voltage level.
[How]
ChromaPre value is zero when bandwidth validation.
Correct ChromaPre calculation.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To enable root clock optimizations, we need a number of
register writes and need to account for the difference
in DPSTREAMCLK between DCN31 and DCN314. To prevent
issues, add a number of register writes to
DCCG_MASK_SH_LIST_DCN314_COMMON(), and define dccg314_init()
which is mostly in alignment with dccg31_init() but
accounts for the new DPSTREAMCLK sequence.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- If we find that applying FAMS doesn't reduce the voltage level,
we will not use it
- Ensure to clear the stream flags indicating FAMS if we hit this
case
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need dequeue MES KIQ under SRIOV when unloading driver
[How]
Modify mes_v11_0_kiq_dequeue_sched which was used to dequeue MES SCHED
to support veriable pipe.
Add MES KIQ dequeue in hw fini
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang with W=1 reports
drivers/gpu/drm/amd/amdgpu/../display/modules/freesync/freesync.c:1132:15: error: variable
'average_render_time_in_us' set but not used [-Werror,-Wunused-but-set-variable]
unsigned int average_render_time_in_us = 0;
^
This variable is not used so remove it, which caused i to be unused so remove that as well.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid new mes fw running with old driver, rename
mes schq fw to gc_*_mes_2.bin.
v2: add MODULE_FIRMWARE declaration
v3: squash in fixup patch
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default"), the delayed registering of
acpi_video# backlight devices has been disabled by default.
The few bugreports where this option was used as a workaround were all
cases where the GPU driver did not call acpi_video_register_backlight()
and the workaround was to pass video.register_backlight_delay=1.
With the recent "ACPI: video: Make acpi_backlight=video work independent
from GPU driver" changes acpi_backlight=video can be used to achieve
the same result. So there is no need for the register_backlight_delay
option + code anymore.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Legacy Display Unit (LDU) fb dirty support used a custom fb dirty callback. Latter
handled only the DIRTYFB IOCTL presentation path but not the ADDFB2/PAGE_FLIP/RMFB
IOCTL path, common for Wayland compositors.
Get rid of the custom callback in favor of drm_atomic_helper_dirtyfb and unify the
handling of the presentation paths inside of vmw_ldu_primary_plane_atomic_update.
This also homogenizes the fb dirty callbacks across all DUs: LDU, SOU and STDU.
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Fixes: 2f5544ff03 ("drm/vmwgfx: Use atomic helper function for dirty fb IOCTL")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321020949.335012-3-zack@kde.org
virtualbox implemented an incomplete version of the svga device which
they decided to drop soon after the initial release. The device was
always broken in various ways and never supported by vmwgfx.
vmwgfx should refuse to load on those configurations but currently
drm has no way of reloading fbdev when the specific pci driver refuses
to load, which would leave users without a usable fb. Instead of
refusing to load print an error and disable a bunch of functionality
that virtualbox never implemented to at least get fb to work on their
setup.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321020949.335012-2-zack@kde.org
The amdgpu driver builds some of its code with hard-float enabled,
whereas the rest of the kernel is built with soft-float.
When building with 64-bit long double, if soft-float and hard-float
objects are linked together, the build fails due to incompatible ABI
tags.
In the past there have been build errors in the amdgpu driver caused by
this, some of those were due to bad intermingling of soft & hard-float
code, but those issues have now all been fixed since commit 58ddbecb14
("drm/amd/display: move remaining FPU code to dml folder").
However it's still possible for soft & hard-float objects to end up
linked together, if the amdgpu driver is built-in to the kernel along
with the test_emulate_step.c code, which uses soft-float. That happens
in an allyesconfig build.
Currently those build errors are avoided because the amdgpu driver is
gated on 128-bit long double being enabled. But that's not a detail the
amdgpu driver should need to be aware of, and if another driver starts
using hard-float the same problem would occur.
All versions of the 64-bit ABI specify that long-double is 128-bits.
However some compilers, notably the kernel.org ones, are built to use
64-bit long double by default.
Apart from this issue of soft vs hard-float, the kernel doesn't care
what size long double is. In particular the kernel using 128-bit long
double doesn't impact userspace's ability to use 64-bit long double, as
musl does.
So always build the 64-bit kernel with 128-bit long double. That should
avoid any build errors due to the incompatible ABI tags. Excluding the
code that uses soft/hard-float, the vmlinux is identical with/without
the flag.
It does mean any code which is incorrectly intermingling soft &
hard-float code will build without error, so those bugs will need to be
caught by testing rather than at build time.
For more background see:
- commit d11219ad53 ("amdgpu: disable powerpc support for the newer display engine")
- commit c653c59178 ("drm/amdgpu: Re-enable DCN for 64-bit powerpc")
- https://lore.kernel.org/r/dab9cbd8-2626-4b99-8098-31fe76397d2d@app.fastmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://msgid.link/20230404102847.3303623-1-mpe@ellerman.id.au
main pull request for v6.4
Core Display:
============
* Bugfixes for error handling during probe
* rework UBWC decoder programming
* prepare_commit cleanup
* bindings for SM8550 (MDSS, DPU), SM8450 (DP)
* timeout calculation fixup
* atomic: use drm_crtc_next_vblank_start() instead of our own
custom thing to calculate the start of next vblank
DP:
==
* interrupts cleanup
DPU:
===
* DSPP sub-block flush on sc7280
* support AR30 in addition to XR30 format
* Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
* Split the HW catalog into individual per-SoC files
DSI:
===
* rework DSI instance ID detection on obscure platforms
GPU:
===
* uapi C++ compatibility fix
* a6xx: More robust gdsc reset
* a3xx and a4xx devfreq support
* update generated headers
* various cleanups and fixes
* GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
* dma-fence deadline hint support and wait-boost
* a640 speedbin support
* a650 speedbin support
Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c:
Conflict between the 7fa5047a43 ("drm: Use of_property_present() for
testing DT property presence") and 9f251f9340 ("drm/msm/adreno: Use
OPP for every GPU generation"). The latter removed the of_ function
call outright, so I went with what's in the PR unchanged.
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The driver doesn't use simple-KMS helpers to set a simple display pipeline
but only the drm_simple_encoder_init() function to initialize an encoder.
That helper is just a wrapper of drm_encoder_init(), but passing a struct
drm_encoder_funcs that sets the .destroy handler to drm_encoder_cleanup().
Since the <drm/drm_simple_kms_helper.h> header is only included for this
helper and because the connector is initialized with drm_connector_init()
as well, do the same for the encoder and drop the header include.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230406110235.3092055-3-javierm@redhat.com
