MSM8916 is similar to the other SoCs that had the RPM stats node added
in commit 290bc68465 ("arm64: dts: qcom: Enable RPM Sleep stats").
However, the dynamic offset readable at 0x14 seems only available on
some of the newer firmware versions. To be absolutely sure, make use
of the new qcom,msm8916-rpm-stats compatible that reads the sleep stats
from a fixed offset of 0xdba0.
Statistics are available for a "vmin" and "xosd" low power mode:
$ cat /sys/kernel/debug/qcom_stats/vmin
Count: 0
Last Entered At: 0
Last Exited At: 0
Accumulated Duration: 0
Client Votes: 0x0
$ cat /sys/kernel/debug/qcom_stats/xosd
Count: 0
Last Entered At: 0
Last Exited At: 0
Accumulated Duration: 0
Client Votes: 0x0
Cc: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211119213953.31970-4-stephan@gerhold.net
Add support for SONY Xperia 1 III (PDX215) and 5 III (PDX214) smartphones.
Both are based on the SM8350 Sagami platform and feature some really high-end
specs, such as:
- 4K (1 III / PRO-I) / 1080p (5 III), 120Hz HDR OLED 10-bit panels
- USB-C 3.1 with HDMI in (yes, phone as display!) and DP out
- 5G
- 8 or 12 gigs of ram, 128/256/512 gigs of storage
- A 3.5mm headphone jack, a RGB notification LED and a uSD card slot :)
- IP65/68 dust/water resistance
- Dual front-firing speakers and a lot of microphones
- Crazy complex camera hardware (especially on the PRO-I), which includes
4 cameras, an RGBIR sensor and a 3D iToF
The aforementioned PRO-I (PDX217) is not supported in this patch, because
even though it shares most of the code with 1 III, nobody really has it (yet?)
This only adds basic support for booting to a USB shell with a
bootloader-enabled display, support for all the awesome hardware listed above
will (hopefully) come (hopefully) soon.
In order to get a working boot image, you need to run (e.g. for 1 III):
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8350-sony-xperia-\
sagami-pdx215.dtb > .Image.gz-dtb
mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 1 \
--os_version 11 \
--os_patch_level 2021-10 \ # or newer
-o boot.img-sony-xperia-pdx215
Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:
fastboot flash boot boot.img-sony-xperia-pdx215
fastboot erase vendor_boot
fastboot flash dtbo emptydtbo.img
fastboot reboot
Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-13-konrad.dybcio@somainline.org
Specify firmware name to be used for the ADSP. Quoting Bjorn from the
respective apq8016-sbc commit:
The firmware for the modem and WiFi subsystems platform specific and is
signed with a OEM specific key (or a test key). In order to support more
than a single device it is therefor not possible to rely on the default
path and stash these files directly in the firmware directory.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104002949.2204727-1-dmitry.baryshkov@linaro.org
Add support for SONY Xperia XZ2, XZ2 Compact and XZ3 smartphones, all based on
the Qualcomm SDM845 chipset. There also exists a fourth Tama device, the XZ2
Premium (Aurora) with a 4K display, but it's relatively rare.
The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.
Downstream workaround:
2e7a9ee1c9
This platform's bootloader is not very nice either. To boot mainline you need
to flash a bogus DTBO (fastboot erasing may cut it, but it takes an inhumane
amount of time) - one that's just 4 bytes (all zeroes) seems to work just fine.
Of course, one can also provide a "normal" DTBO (device-specific DT overlayed
on top of the SoC DT), but that's not yet supported by the mainline kernel
build system.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211111184630.605035-1-konrad.dybcio@somainline.org
These properties aren't documented nor implemented in the driver.
Drop them.
Fixes warnings as:
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml
...
arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml
...
Fixes: 69cc3114ab ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211030100413.28370-1-david@ixit.cz
Support Homestar rev4 board where Parade ps8640 is added as the
second source edp bridge.
Support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-homestar.dtsi"
to per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-homestar.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.4.If7aaa8e36f1269acae5488035bd62ce543756bf8@changeid
Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the
second source edp bridge.
To support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-lazor.dtsi" to
per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-lazor.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.3.Ie56f55924f5c7706fe3194e710bbef6fdb8b5bc6@changeid
MSM DSI host driver actually parses "data-lanes" in DT and compare
it with the number of DSI lanes the bridge driver sets for
mipi_dsi_device. So we need to always specify "data-lanes" for the
DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
fragment, but missing in parade-ps8640 dts fragment, which requires
a fixup.
Since we'll do 4-lane DSI regardless of which bridge chip is used,
instead of adding "data-lanes" to parade-ps8640 dts fragment, let's
just move "data-lanes" from the bridge dts to sc7180-trogdor.dtsi.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.2.If23c83a786fc4d318a1986f43803f22b4b1d82cd@changeid
