Instead of having a single file with all bridge chains, list bridges
under a corresponding per-encoder debugfs directory.
While we are at it, also slightly improve the formatting of the bridge
data: split a single line entry into multiple lines, include the symbol
name of the bridge funcs and add the textual representation of the
bridge ops.
Example of the listing:
$ cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dsi_mgr_bridge_funcs
type: [0] Unknown
ops: [0]
bridge[1]: lt9611uxc_bridge_funcs
type: [11] HDMI-A
OF: /soc@0/geniqup@9c0000/i2c@994000/hdmi-bridge@2b:lontium,lt9611uxc
ops: [7] detect edid hpd
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203115315.1306124-3-dmitry.baryshkov@linaro.org
The function below is used only within this source file, but is not static.
>> drivers/gpu/drm/imagination/pvr_device.c:129:6: warning: no previous prototype for function 'pvr_device_process_active_queues' [-Wmissing-prototypes]
129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
| ^
drivers/gpu/drm/imagination/pvr_device.c:129:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
| ^
| static
1 warning generated.
Make it static.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311250632.giVEx7MU-lkp@intel.com/
Fixes: eaf01ee5ba ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-3-donald.robson@imgtec.com
A missing header causes the compiler to warn that the function below is not
forward declared.
>> drivers/gpu/drm/imagination/pvr_fw_meta.c:33:1: warning: no previous prototype for function 'pvr_meta_cr_read32' [-Wmissing-prototypes]
33 | pvr_meta_cr_read32(struct pvr_device *pvr_dev, u32 reg_addr, u32 *reg_value_out)
| ^
drivers/gpu/drm/imagination/pvr_fw_meta.c:32:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
32 | int
| ^
| static
1 warning generated.
Include the correct header.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311250226.Da2yiSKp-lkp@intel.com/
Fixes: cc1aeedb98 ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-2-donald.robson@imgtec.com
This line appears to confuse the compiler and had been noticed previously in
clang-tidy output. There isn't anything fundamentally wrong that I can see.
I suspect that it just looks like a mistake - hence the first note. By making
the second operand an actual bool result, const correctness can be preserved
while silencing the warning.
>> drivers/gpu/drm/imagination/pvr_device_info.c:230:47: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ^ ~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/imagination/pvr_device_info.c:230:47: note: use '&' for a bitwise operation
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ^~
| &
drivers/gpu/drm/imagination/pvr_device_info.c:230:47: note: remove constant to silence this warning
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ~^~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311241752.3iLyyFcA-lkp@intel.com/
Fixes: f99f5f3ea7 ("drm/imagination: Add GPU ID parsing and firmware loading")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-1-donald.robson@imgtec.com
This patch introduces an initial KUnit test suite for GEM objects
backed by shmem buffers.
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
v5:
- using __drm_kunit_helper_alloc_drm_device() to avoid local struct
v4:
- Add missing MMU dependency for DRM_GEM_SHMEM_HELPER (kernel test robot)
v3:
- Explicitly cast pointers in the helpers
- Removed unused pointer to parent dev in struct fake_dev
- Test entries reordering in Kconfig and Makefile sent as a separate patch
v2:
- Improved description of test cases
- Cleaner error handling using KUnit actions
- Alphabetical order in Kconfig and Makefile
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130171417.74162-1-marpagan@redhat.com
drm_bridge_hpd_enable()/drm_bridge_hpd_disable() callbacks call into
the respective driver's hpd_enable()/hpd_disable() ops. These ops control
the HPD enable/disable logic which in some cases like MSM can be a
dedicate hardware block to control the HPD.
During probe_defer cases, a connector can be initialized and then later
destroyed till the probe is retried. During connector destroy in these
cases, the hpd_disable() callback gets called without a corresponding
hpd_enable() leading to an unbalanced state potentially causing even
a crash.
This can be avoided by the respective drivers maintaining their own
state logic to ensure that a hpd_disable() without a corresponding
hpd_enable() just returns without doing anything.
However, to have a generic fix it would be better to avoid the
hpd_disable() callback from the connector destroy path and let
the hpd_enable() / hpd_disable() balance be maintained by the
corresponding drm_bridge_connector_enable_hpd() /
drm_bridge_connector_disable_hpd() APIs which should get called by
drm_kms_helper_disable_hpd().
changes in v2:
- minor change in commit text (Dmitry)
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919174813.26958-1-quic_abhinavk@quicinc.com
This consists of simply storing the most recent deadline, and adding an
ioctl to retrieve the deadline. This can be used in conjunction with
the SET_DEADLINE ioctl on a fence fd for testing. Ie. create various
sw_sync fences, merge them into a fence-array, set deadline on the
fence-array and confirm that it is propagated properly to each fence.
v2: Switch UABI to express deadline as u64
v3: More verbose UAPI docs, show how to convert from timespec
v4: Better comments, track the soonest deadline, as a normal fence
implementation would, return an error if no deadline set.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-4-robdclark@gmail.com
Add a new flag to let userspace provide a deadline as a hint for syncobj
and timeline waits. This gives a hint to the driver signaling the
backing fences about how soon userspace needs it to compete work, so it
can adjust GPU frequency accordingly. An immediate deadline can be
given to provide something equivalent to i915 "wait boost".
v2: Use absolute u64 ns value for deadline hint, drop cap and driver
feature flag in favor of allowing count_handles==0 as a way for
userspace to probe kernel for support of new flag
v3: More verbose comments about UAPI
v4: Fix negative zero, s/deadline_ns/deadline_nsec/ for consistency with
existing ioctl struct fields
v5: Comment/description typo fixes
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[DB: fixed checkpatch warnings]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-2-robdclark@gmail.com
Currently the QAIC DRM device registers itself when the MHI QAIC_CONTROL
channel becomes available. This is when the device is able to process
workloads. However, the DRM driver also provides the debugfs interface
bootlog for the device. If the device fails to boot to the QSM (which
brings up the MHI QAIC_CONTROL channel), the bootlog won't be available for
debugging why it failed to boot.
Change when the DRM device registers itself from when QAIC_CONTROL is
available to when the card is first probed on the PCI bus. Additionally,
make the DRM driver persist through reset/error cases so the driver
doesn't have to be reloaded to access the card again. Send
KOBJ_ONLINE/OFFLINE uevents so userspace can know when DRM device is
ready to handle requests.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117174337.20174-3-quic_jhugo@quicinc.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A copy performance query job is a job that copy the complete
or partial result of a query to a buffer. In order to copy the result of
a performance query to a buffer, we need to get the values from the
performance monitors.
So, create a user extension for the CPU job that enables the creation
of a copy performance query job. This user extension will allow the creation
of a CPU job that copy the results of a performance query to a BO with the
possibility to indicate the availability with a availability bit.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-19-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A reset performance query job is a job that resets the
performance queries by resetting the values of the perfmons. Moreover,
we also reset the syncobjs related to the availability of the query.
So, create a user extension for the CPU job that enables the creation
of a reset performance job. This user extension will allow the creation of
a CPU job that resets the perfmons values and resets the availability syncobj.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-18-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A copy timestamp query job is a job that copy the complete
or partial result of a query to a buffer. As V3D doesn't provide any
mechanism to obtain a timestamp from the GPU, it is a job that needs
CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a copy timestamp query job. This user extension will allow the creation
of a CPU job that copy the results of a timestamp query to a BO with the
possibility to indicate the timestamp availability with a availability bit.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-17-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A reset timestamp job is a job that resets the timestamp
queries based on the value offset of the first query. As V3D doesn't
provide any mechanism to obtain a timestamp from the GPU, it is a job
that needs CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a reset timestamp job. This user extension will allow the creation of
a CPU job that resets the timestamp value in the timestamp BO and resets
the availability syncobj.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-16-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A timestamp query job is a job that calculates the
query timestamp and updates the query availability by signaling a
syncobj. As V3D doesn't provide any mechanism to obtain a timestamp
from the GPU, it is a job that needs CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a timestamp query job. This user extension will allow the creation of
a CPU job that performs the timestamp query calculation and updates the
timestamp BO with the proper value.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-15-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. An indirect CSD job is a job that, when executed in the
queue, will map the indirect buffer, read the dispatch parameters, and
submit a regular dispatch. Therefore, it is a job that needs CPU
intervention.
So, create a user extension for the CPU job that enables the creation
of an indirect CSD. This user extension will allow the creation of a CSD
job linked to a CPU job. The CPU job will wait for the indirect CSD job
dependencies and, once they are signaled, it will update the CSD job
parameters.
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-14-mcanal@igalia.com
Currently, v3d_get_extensions() only parses multisync data and assigns
it to the `struct v3d_submit_ext`. But, to implement the CPU job with
user extensions, we want v3d_get_extensions() to be able to parse CPU
job data and assign it to the `struct v3d_cpu_job`.
Therefore, allow the function v3d_get_extensions() to use `struct v3d_cpu_job *`
as a parameter. If the `struct v3d_cpu_job *` is assigned to NULL, it means
that the job is a GPU job and CPU job extensions should be rejected.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-10-mcanal@igalia.com
Create a new type of job, a CPU job. A CPU job is a type of job that
performs operations that requires CPU intervention. The overall idea is
to use user extensions to enable different types of CPU job, allowing the
CPU job to perform different operations according to the type of user
extension. The user extension ID identify the type of CPU job that must
be dealt.
Having a CPU job is interesting for synchronization purposes as a CPU
job has a queue like any other V3D job and can be synchoronized by the
multisync extension.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-9-mcanal@igalia.com
