- Fix multi-MSI base vector number allocation (Sandor Bodo-Merle)
- Restrict multi-MSI support to uniprocessor kernel (Sandor Bodo-Merle)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Support multi-MSI only on uniprocessor kernel
PCI: iproc: Fix multi-MSI base vector number allocation
- Decode PIO Posted/Non-posted Request correctly in error logging (Pali
Rohár)
- Work around incorrect Vendor ID in Marvell Armada 3700 (Pali Rohár)
* remotes/lorenzo/pci/aardvark:
PCI: aardvark: Implement workaround for the readback value of VEND_ID
PCI: aardvark: Fix checking for PIO Non-posted Request
- Register IRQ handlers after device and data are ready (Javier Martinez
Canillas)
* pci/host/rockchip:
PCI: rockchip: Register IRQ handlers after device and data are ready
- Coalesce host bridge apertures so we can allocate large BARs that cross
contiguous apertures (Kai-Heng Feng)
* pci/resource:
PCI: Coalesce host bridge contiguous apertures
- Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael
Norwitz)
- Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun)
* pci/reset:
PCI: Work around Huawei Intelligent NIC VF FLR erratum
PCI: Add pci_reset_bus_function() Secondary Bus Reset interface
- Leave Apple Thunderbolt controllers on for s2idle or standby so they work
after resume (Konstantin Kharlamov)
* pci/pm:
PCI: Leave Apple Thunderbolt controllers on for s2idle or standby
- Rename Rename upstream_bridge_distance() to calc_map_type_and_dist()
(Logan Gunthorpe)
- Collect ACS list message in stack buffer to avoid sleeping (Logan
Gunthorpe)
- Use correct calc_map_type_and_dist() return type (Logan Gunthorpe)
- Warn if host bridge not in whitelist (Logan Gunthorpe)
- Refactor pci_p2pdma_map_type() (Logan Gunthorpe)
- Avoid pci_get_slot(), which may sleep (Logan Gunthorpe)
- Simplify distance calculation in __calc_map_type_and_dist() and
calc_map_type_and_dist_warn() (Christoph Hellwig)
- Finish RCU conversion of pdev->p2pdma (Eric Dumazet)
* pci/p2pdma:
PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma
PCI/P2PDMA: Simplify distance calculation
PCI/P2PDMA: Avoid pci_get_slot(), which may sleep
PCI/P2PDMA: Refactor pci_p2pdma_map_type()
PCI/P2PDMA: Warn if host bridge not in whitelist
PCI/P2PDMA: Use correct calc_map_type_and_dist() return type
PCI/P2PDMA: Collect acs list in stack buffer to avoid sleeping
PCI/P2PDMA: Rename upstream_bridge_distance() and rework doc
- Ignore pciehp Link Down/Up caused by DPC so device remains bound to
driver (Lukas Wunner)
- Declare global cpci_debug in header file (Krzysztof Wilczyński)
* pci/hotplug:
PCI: cpcihp: Declare cpci_debug in header file
PCI: pciehp: Ignore Link Down/Up caused by DPC
- Make domain/bus/dev/fn format in AER messages match pci_name() format
(Yicong Yang)
* pci/error:
Documentation: PCI: Fix typo in pci-error-recovery.rst
PCI/AER: Use consistent format when printing PCI device
cpci_debug is declared as a global variable in cpci_hotplug_core.c and used
in cpci_hotplug_pci.c via an "extern". Add an extern declaration in the
header file.
Resolves the following sparse warning:
drivers/pci/hotplug/cpci_hotplug_core.c:47:5: warning: symbol 'cpci_debug' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20210701184306.1492003-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
An IRQ handler may be called at any time after it is registered, so
anything it relies on must be ready before registration.
rockchip_pcie_subsys_irq_handler() and rockchip_pcie_client_irq_handler()
read registers in the PCIe controller, but we registered them before
turning on clocks to the controller. If either is called before the clocks
are turned on, the register reads fail and the machine hangs.
Similarly, rockchip_pcie_legacy_int_handler() uses rockchip->irq_domain,
but we installed it before initializing irq_domain.
Register IRQ handlers after their data structures are initialized and
clocks are enabled.
Found by enabling CONFIG_DEBUG_SHIRQ, which calls the IRQ handler when it
is being unregistered. An error during the probe path might cause this
unregistration and IRQ handler execution before the device or data
structure init has finished.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210608080409.1729276-1-javierm@redhat.com
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
tegra_pcie_ep_raise_msi_irq() shifted a signed 32-bit value left by 31
bits. The behavior of this is implementation-defined.
Replace the shift by BIT(), which is well-defined.
Found by cppcheck:
$ cppcheck --enable=all drivers/pci/controller/dwc/pcie-tegra194.c
Checking drivers/pci/controller/dwc/pcie-tegra194.c ...
drivers/pci/controller/dwc/pcie-tegra194.c:1829:23: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour. See condition at line 1826. [shiftTooManyBitsSigned]
appl_writel(pcie, (1 << irq), APPL_MSI_CTRL_1);
^
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210618160219.303092-1-jonathanh@nvidia.com
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
document describes in erratum 4.1 PCIe value of vendor ID (Ref #: 243):
The readback value of VEND_ID (RD0070000h [15:0]) is 1B4Bh, while it
should read 11ABh.
The firmware can write the correct value, 11ABh, through VEND_ID
(RD0076044h [15:0]).
Implement this workaround in aardvark driver for both PCI vendor id and PCI
subsystem vendor id.
This change affects and fixes PCI vendor id of emulated PCIe root bridge.
After this change emulated PCIe root bridge has correct vendor id.
Link: https://lore.kernel.org/r/20210624222621.4776-5-pali@kernel.org
Fixes: 8a3ebd8de3 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Attempting to boot 32-bit ARM kernels under QEMU's 3.x virt models fails
when we have more than 512M of RAM in the model as we run out of vmalloc
space for the PCI ECAM regions. This failure will be silent when running
libvirt, as the console in that situation is a PCI device.
In this configuration, the kernel maps the whole ECAM, which QEMU sets up
for 256 buses, even when maybe only seven buses are in use. Each bus uses
1M of ECAM space, and ioremap() adds an additional guard page between
allocations. The kernel vmap allocator will align these regions to 512K,
resulting in each mapping eating 1.5M of vmalloc space. This means we need
384M of vmalloc space just to map all of these, which is very wasteful of
resources.
Fix this by only mapping the ECAM for buses we are going to be using. In
my setups, this is around seven buses in most guests, which is 10.5M of
vmalloc space - way smaller than the 384M that would otherwise be required.
This also means that the kernel can boot without forcing extra RAM into
highmem with the vmalloc= argument, or decreasing the virtual RAM available
to the guest.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/E1lhCAV-0002yb-50@rmk-PC.armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Downstream Port Containment (PCIe r5.0, sec. 6.2.10) disables the link upon
an error and attempts to re-enable it when instructed by the DPC driver.
A slot which is both DPC- and hotplug-capable is currently powered off by
pciehp once DPC is triggered (due to the link change) and powered back up
on successful recovery. That's undesirable, the slot should remain powered
so the hotplugged device remains bound to its driver. DPC notifies the
driver of the error and of successful recovery in pcie_do_recovery() and
the driver may then restore the device to working state.
Moreover, Sinan points out that turning off slot power by pciehp may foil
recovery by DPC: Power off/on is a cold reset concurrently to DPC's warm
reset. Sathyanarayanan reports extended delays or failure in link
retraining by DPC if pciehp brings down the slot.
Fix by detecting whether a Link Down event is caused by DPC and awaiting
recovery if so. On successful recovery, ignore both the Link Down and the
subsequent Link Up event.
Afterwards, check whether the link is down to detect surprise-removal or
another DPC event immediately after DPC recovery. Ensure that the
corresponding DLLSC event is not ignored by synthesizing it and invoking
irq_wake_thread() to trigger a re-run of pciehp_ist().
The IRQ threads of the hotplug and DPC drivers, pciehp_ist() and
dpc_handler(), race against each other. If pciehp is faster than DPC, it
will wait until DPC recovery completes.
Recovery consists of two steps: The first step (waiting for link
disablement) is recognizable by pciehp through a set DPC Trigger Status
bit. The second step (waiting for link retraining) is recognizable through
a newly introduced PCI_DPC_RECOVERING flag.
If DPC is faster than pciehp, neither of the two flags will be set and
pciehp may glean the recovery status from the new PCI_DPC_RECOVERED flag.
The flag is zero if DPC didn't occur at all, hence DLLSC events are not
ignored by default.
pciehp waits up to 4 seconds before assuming that DPC recovery failed and
bringing down the slot. This timeout is not taken from the spec (it
doesn't mandate one) but based on a report from Yicong Yang that DPC may
take a bit more than 3 seconds on HiSilicon's Kunpeng platform.
The timeout is necessary because the DPC Trigger Status bit may never
clear: On Root Ports which support RP Extensions for DPC, the DPC driver
polls the DPC RP Busy bit for up to 1 second before giving up on DPC
recovery. Without the timeout, pciehp would then wait indefinitely for DPC
to complete.
This commit draws inspiration from previous attempts to synchronize DPC
with pciehp:
By Sinan Kaya, August 2018:
https://lore.kernel.org/linux-pci/20180818065126.77912-1-okaya@kernel.org/
By Ethan Zhao, October 2020:
https://lore.kernel.org/linux-pci/20201007113158.48933-1-haifeng.zhao@intel.com/
By Kuppuswamy Sathyanarayanan, March 2021:
https://lore.kernel.org/linux-pci/59cb30f5e5ac6d65427ceaadf1012b2ba8dbf66c.1615606143.git.sathyanarayanan.kuppuswamy@linux.intel.com/
Link: https://lore.kernel.org/r/0be565d97438fe2a6d57354b3aa4e8626952a00b.1619857124.git.lukas@wunner.de
Reported-by: Sinan Kaya <okaya@kernel.org>
Reported-by: Ethan Zhao <haifeng.zhao@intel.com>
Reported-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <kbusch@kernel.org>
Merge __calc_map_type_and_dist() and calc_map_type_and_dist_warn() into
calc_map_type_and_dist() to simplify the code a bit. This now means we add
the devfn strings to the acs_buf unconditionally even if the buffer is not
printed, but that is not a lot of overhead and keeps the code much simpler.
Link: https://lore.kernel.org/r/20210614055310.3960791-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
In order to use upstream_bridge_distance_warn() from a dma_map function, it
must not sleep. However, pci_get_slot() takes the pci_bus_sem so it might
sleep.
In order to avoid this, try to get the host bridge's device from the first
element in the device list. It should be impossible for the host bridge's
device to go away while references are held on child devices, so the first
element should not be able to change and, thus, this should be safe.
Introduce a static function called pci_host_bridge_dev() to obtain the host
bridge's root device.
Link: https://lore.kernel.org/r/20210610160609.28447-7-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In order to call the calc_map_type_and_dist_warn() function from a dma_map
operation, the function must not sleep. The only reason it sleeps is to
allocate memory for the seq_buf to print a verbose warning telling the user
how to disable ACS for that path.
Instead of allocating the memory with kmalloc(), allocate a smaller buffer
on the stack. A 128 byte buffer is enough to print 10 PCI device names. A
system with 10 bridge ports between two devices that have ACS enabled would
be unusually large, so this should still be a reasonable limit.
This also cleans up the awkward (and broken) return with -ENOMEM which
contradicts the return type and the caller was not prepared for.
Link: https://lore.kernel.org/r/20210610160609.28447-3-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The function upstream_bridge_distance() has evolved such that its name is
no longer entirely reflective of what the function does. It not only
calculates the distance between two peers but also calculates how the DMA
addresses for those two peers should be mapped.
Rename it to calc_map_type_and_dist() and rework the documentation to
better describe the two pieces of information the function returns.
[bhelgaas: tweak comment wording]
Link: https://lore.kernel.org/r/20210610160609.28447-2-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On Macbook 2013, resuming from suspend-to-idle or standby resulted in the
external monitor no longer being detected, a stacktrace, and errors like
this in dmesg:
pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible)
The reason is that we know how to turn power to the Thunderbolt controller
*off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power
back on. We have to rely on firmware to turn the power back on.
When going to the "suspend-to-idle" or "standby" system sleep states,
firmware is not involved either on the suspend side or the resume side, so
we can't use SXIO/SXFP/SXLF to turn the power off.
Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when
we're going to the "suspend-to-idle" or "standby" system sleep states.
Fixes: 1df5172c5c ("PCI: Suspend/resume quirks for Apple thunderbolt")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767
Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
