When GPU suspend is aborted, do the same for dGPU as APU to reset
soc15 asic. Otherwise it may cause following errors:
[ 547.229463] amdgpu 0001:81:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_0.2.1.0 test failed (-110)
[ 555.126827] amdgpu 0000:0a:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_0.2.1.0 test failed (-110)
[ 555.126901] [drm:amdgpu_gfx_enable_kcq [amdgpu]] *ERROR* KCQ enable failed
[ 555.126957] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <gfx_v9_4_3> failed -110
[ 555.126959] amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
[ 555.126965] PM: dpm_run_callback(): pci_pm_resume+0x0/0xe0 returns -110
[ 555.126966] PM: Device 0000:0a:00.0 failed to resume async: error -110
This fix has been tested on Mi308X.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Tested-by: Shuo Liu <shuox.liu@linux.alibaba.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/2462b4b12eb9d025e82525178d568cbaa4c223ff.1736739303.git.gerry@linux.alibaba.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Reverse the visual confirm recouts
- Exclude clkoffset and ips setting for dcn351 specific
- Fix cursor programming problems
- Increase block_sequence array size
- Use Nominal vBlank to determine vstartup if Provided
- Fix clock frequencies incorrect problems for dcn401
- Add SDP programming for UHBR link as well
- Support "Broadcast RGB" drm property
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When checking if a pipe can disable cursor to prevent duplicate cursors,
having visual confirm on will prevent disabling cursors on planes which
cover the bottom of the screen.
[HOW]
When checking if a plane can disable visual confirm, the pipe first
reverses these calculations before doing the checks.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's possible to generate more than 50 steps in hwss_build_fast_sequence,
for example with a 6-pipe asic where all pipes are in one MPC chain. This
overflows the block_sequence buffer and corrupts block_sequence_steps,
causing a crash.
[How]
Expand block_sequence to 100 items. A naive upper bound on the possible
number of steps for a 6-pipe asic, ignoring the potential for steps to be
mutually exclusive, is 91 with current code, therefore 100 is sufficient.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
vBlank used to determine the max vStartup is based on the smallest between
the vblank provided by the timing and vblank in ip_caps.
Extra vblank time is not considered if the vblank provided by the timing ends
up being higher than what's defined by the ip_caps
Use 1 less than the vblank size in case the timing is interlaced
so vstartup will always be less than vblank_nom.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Knowing the destination of OTG's vertical interrupt 2 is useful for
debugging, but it is not currently included in the OTG state readback
logic
[How]
Read the OTG interrupt destination register to get the vertical interrupt
2 destination on ASICs that have this register when reading back the OTG
state from hardware
Reviewed-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The source device outputs a full RGB signal, but TV may
be set to use limited RGB. The mismatch in color
range leads to a degradation in image quality.
Display driver should have the ability to switch
between the full and limited RGB to match TV's settings.
[HOW]
Add support of the linux DRM "Broadcast RGB" property, which
indicates the Quantization Range (Full vs Limited) used.
User space can set this property to be "Automatic", "Full"
or "Limited 16:235" to adjust the output color range.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Yan Li <yan.li@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a couple of statements with two following semicolons, replace
these with just one semicolon.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch removes useless NULL pointer checks in functions like
ci_set_private_data_variables_based_on_pptable() and
ci_setup_default_dpm_tables().
The pointers in question are initialized as addresses to existing
structures such as rdev->pm.dpm.dyn_state.vddc_dependency_on_sclk by
utilizing & operator and therefore are not in danger of being NULL.
Fix this by removing extra checks thus cleaning the code a tiny bit.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There could be configs where some UMC instances are harvested. This
information is obtained through discovery data and populated in
umc.active_mask. Avoid reassigning this as AID mask, instead use the
mask directly while iterating through umc instances. This is to avoid
accesses to harvested UMC instances.
v2: fix warning (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Populate pmfw version for SMU v13.0.12 to device struct
v2: Remove ip version check to get smu version
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set GC 9.5.0 noretry default as 1 for better performance. It can be
changed by the administrator using amdgpu.noretry=0 or by the user using
HSA_XNACK=1 environment variable.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviwanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_device_by_pci_dev(), kfd_get_pasid_limit() and kfd_set_pasid_limit()
have been unused since 2023's
commit c99a2e7ae2 ("drm/amdkfd: drop IOMMUv2 support")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we can select a workload profile dynamically when
we submit work, it's best to default to the bootup
default workload profile. Defaulting to other profiles
prevents some power management features from kicking in
during idle periods. Once all jobs have finished, the
workload profile will automatically move back to default
bootup for max power savings.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helpers to switch the workload profile dynamically when
commands are submitted. This allows us to switch to
the FULLSCREEN3D or COMPUTE profile when work is submitted.
Add a delayed work handler to delay switching out of the
selected profile if additional work comes in. This works
the same as the VIDEO profile for VCN. This lets dynamically
enable workload profiles on the fly and then move back
to the default when there is no work.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current kfd driver has its own PASID value for a kfd process and uses it to
locate vm at interrupt handler or mapping between kfd process and vm. That
design is not working when a physical gpu device has multiple spatial
partitions, ex: adev in CPX mode. This patch has kfd driver use same pasid
values that graphic driver generated which is per vm per pasid.
These pasid values are passed to fw/hardware. We do not need change interrupt
handler though more pasid values are used. Also, pasid values at log are
replaced by user process pid; pasid values are not exposed to user. Users see
their process pids that have meaning in user space.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RRMT could get dynamically enabled/disabled by PSP firmware. Read the
status from register for reading RRMT status. For VFs, this is not
accessible, hence assume that it's always disabled for now.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RRMT could get dynamically enabled/disabled by PSP firmware. Read the
status from register for reading RRMT status. For VFs, this is not
accessible, hence assume that it's always disabled for now.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change. Rework the code to allow for
adding some additional i2c buses in conjunction with DC
in the future.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was leftover from when amdgpu was forked from radeon.
The function is empty so drop it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fields are marked as reserved in atom_firmware_info_v3_1,
but thet contain valid data in all of the vbios images I've
looked at so add parse these fields as per
atom_firmware_info_v3_2. The offsets are the same and the
reset of the structure is the same.
v2: squash in NULL checks
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose the OEM i2c bus on boards that support it.
This bus is used for OEM specific features like RGB, etc.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow the creation of an OEM i2c bus and use the proper
DC helpers for that case.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_index can be fetched from the ddc_service; no need for a separate
parameter. res is not used.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
