Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
"ranges" is only valid for MMIO addresses as it is used for translating
addresses to CPU address. Even if a partial translation was supported,
the DT is incorrect here as the nvmem-layout node would also need
"ranges". So drop "ranges" and the associated cell size properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260108231558.1422454-2-robh@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The stringray-clocks.dtsi is oddly included in the middle of a bus
node and is only included in one place, so collapse it into
stingray.dtsi. Move the fixed and fixed-factor clock nodes to the root
as they are not part of the bus. Rename the node names to use preferred
names.
Drop the unnecessary 1:1 fixed-factor clock providers.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-5-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The "silabs,si3226x" and "brcm,bdc-v0.16" nodes have no documentation
and no driver in the kernel, so remove them. They can be added back with
proper documentation if there is a need for them.
Note that if both USB ports have similar memory maps in relationship to
their USB PHY nodes, it looks like the device controller should have
been at 0x12000, not 0x21000?
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260106-dt-dtbs-broadcom-fixes-v1-4-ba45874e4553@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The node describing the RP1 endpoint currently uses a specific name
('rp1_nexus') that does not correctly reflect the PCI topology.
Update the DT with the correct topology and use generic node names.
Additionally, since the driver dropped overlay support in favor of a
fully described DT, rename '...-ovl-rp1.dts' to '...-base.dtsi' for
inclusion in the board DTB, as it is no longer compiled as a
standalone DTB.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/827b12ba48bb47bc77a0f5e5617aea961c8bc6b5.1766077285.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
In Raspberry Pi 5 DTS, the Ethernet clock rates must be assigned
as the default clock register values are not valid for the
Ethernet interface to function.
This can be done either in rp1_clocks node or in rp1_eth node.
Define the rates in rp1_eth node, as those clocks are 'leaf' clocks
used specifically by the Ethernet device only.
Fixes: 43456fdfc0 ("arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5")
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20251021135533.5517-1-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
bcm2712.dtsi:494.4-497.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map:
Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822133407.312505-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The default interrupt parent is a parent node containing
"#interrupt-cells", so an explicit "interrupt-parent" is not necessary.
Fixes these dtschema warnings:
(arm,gic-400): v2m@70000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@60000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@50000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@40000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@30000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@20000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@10000: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
(arm,gic-400): v2m@0: 'interrupt-parent' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250609203705.2852500-1-robh@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Add the fully populated DTS for RaspberryPi 5 which includes
the RP1 node definition. The inclusion tree is as follow (the
arrow points to the includer):
rp1-common.dtsi ----> rp1-nexus.dtsi ----> bcm2712-rpi-5-b.dts
^
|
bcm2712-rpi-5-b-ovl-rp1.dts
This is designed to maximize the compatibility with downstream DT
while ensuring that a fully defined DT (one which includes the RP1
node as opposed to load it from overlay at runtime) is present
since early boot stage.
Since the preferred board DT is the fully populated one, name it
bcm2712-rpi-5-b.dts and move the previous one into
bcm2712-rpi-5-b-ovl-rp1.dts.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20250529135052.28398-9-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
All the BCMBCA SoCs share a set of peripherals at 0xff800000,
albeit at slightly varying memory locations on the bus and
with varying IRQ assignments.
Add the watchdog, GPIO blocks, RNG, LED, second UART and DMA
blocks for the BCM63158 based on the vendor files 63158_map_part.h
and 63158_intr.h from the "bcmopen-consumer" code drop.
The DTSI file has clearly been authored for the B0 revision of
the SoC: there is an earlier A0 version, but this has
the UARTs in the legacy PERF memory space, while the B0
has opened a new peripheral window at 0xff812000 for the
three UARTs. It also has a designated AHB peripheral area
at 0xff810000 where the DMA resides, the peripheral range
window fits these two peripheral groups.
This SoC has up to 256 possible GPIOs due to having 8
registers with 32 GPIOs in each available.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20250512-bcmbca-peripherals-arm-v3-12-86f97ab4326f@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
All the BCMBCA SoCs share a set of peripherals at 0xff800000,
albeit at slightly varying memory locations on the bus and
with varying IRQ assignments. ARM64 SoCs have additional
peripherals at 0xff858000. Extend the peripheral window range
to 0x400000 and add the DMA controller at offset 0x59000.
Add the watchdog, GPIO blocks, RNG, LED, second UART and DMA
blocks for the BCM6858 based on the vendor files 6858_map_part.h
and 6858_intr.h from the "bcmopen-consumer" code drop.
This SoC has up to 256 possible GPIOs due to having 8
registers with 32 GPIOs in each available.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20250512-bcmbca-peripherals-arm-v3-11-86f97ab4326f@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
All the BCMBCA SoCs share a set of peripherals at 0xff800000,
albeit at slightly varying memory locations on the bus and
with varying IRQ assignments. ARM64 SoCs have additional
peripherals at 0xff858000. Extend the BCM6856 the PERF window
to 0x400000 and add the DMA block at offset 0x59000.
Add the watchdog, GPIO blocks, RNG, LED, second UART and DMA
blocks for the BCM6856 based on the vendor files 6856_map_part.h
and 6856_intr.h from the "bcmopen-consumer" code drop.
This SoC has up to 256 possible GPIOs due to having 8
registers with 32 GPIOs in each available.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20250512-bcmbca-peripherals-arm-v3-10-86f97ab4326f@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
All the BCMBCA SoCs share a set of peripherals at 0xff800000,
albeit at slightly varying memory locations on the bus and
with varying IRQ assignments. ARM64 SoCs have additional
peripherals at 0xff858000, we extend the peripheral bus
range to 0x400000 to cover this area.
Add the watchdog, remaining GPIO blocks, RNG, and DMA blocks
for the BCM4908 based on the vendor files 4908_map_part.h
and 4908_intr.h from the "bcmopen-consumer" code drop.
This SoC has up to 320 possible GPIOs due to having 10
registers with 32 GPIOs in each available.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20250512-bcmbca-peripherals-arm-v3-9-86f97ab4326f@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.16, please pull the following:
- Stanimir adds and enables the PCIe root complex Device Tree nodes present on the
Raspberry Pi 5
- Rob updates the BCM2712 L2 cache node names to use a more comforming
name
* tag 'arm-soc/for-6.16/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Use "l2-cache" for L2 cache node names
arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes
arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
Link: https://lore.kernel.org/r/20250505165810.1948927-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
