Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
Pull ata updates from Niklas Cassel:
- Add 'external' to the libata.force module parameter, in order to
allow a user to workaround broken firmware (me)
- Use the str_up_down() helper in the sata_via driver (Salah Triki)
- Convert the Freescale PowerQUICC SATA device tree binding to YAML
(J. Neuschäfer)
- Do not use ATAPI DMA for a device that only supports PIO (me)
- Add Marvell 88SE9215 PCI device ID to the ahci driver. Since the
controller has quirks, it cannot rely on the generic AHCI PCI class
code entry (Daniel Kral)
- Improve the return value of atapi_check_dma() (Huacai Chen)
- Fix the NCQ Non-Data log not supported print to actually reference
the correct log (me)
- Make Marvel 88SE9215 prefer DMA for ATAPI devices (Huacai Chen)
- Simplify the AHCI IRQ vector allocations by performing the IRQ vector
allocations in the same function, regardless of IRQ type (Tomas
Henzl)
* tag 'ata-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: simplify init function
ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
ata: libata: Fix NCQ Non-Data log not supported print
ata: libata: Improve return value of atapi_check_dma()
ahci: add PCI ID for Marvell 88SE9215 SATA Controller
ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
dt-bindings: ata: Convert fsl,pq-sata to YAML
ata: sata_via: Use str_up_down() helper in vt6420_prereset()
ata: libata-core: Add 'external' to the libata.force kernel parameter
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
Pull clocksource/event updates from Thomas Gleixner:
- Add support for suspend/resume in the STM32 LP-Timer driver with a
follow up fix, which uses the proper method to setup the timer as a
optional wakeup source instead of trying to force it as mandatory
wakeup source.
- The usual device tree updates to enable new SoC models in existing
drivers.
- Trivial spelling, style and indentation fixes
* tag 'timers-clocksource-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: timer: Add SiFive CLINT2
clocksource/drivers/stm32-lptimer: Use wakeup capable instead of init wakeup
clocksource/drivers/exynos_mct: Fixed a spelling error
clocksource/drivers/stm32-lptimer: Add support for suspend / resume
dt-bindings: timer: exynos4210-mct: add samsung,exynos2200-mct-peris compatible
dt-bindings: timer: exynos4210-mct: Add samsung,exynos990-mct compatible
dt-bindings: timer: Correct indentation and style in DTS example
Pull MSI irq fix from Thomas Gleixner:
"An urgent fix for the XEN related PCI/MSI changes:
XEN used a global variable to disable the masking of MSI interrupts as
XEN handles that on the hypervisor side. This turned out to be a
problem with VMD as the PCI devices behind a VMD bridge are not always
handled by the hypervisor and then require masking by guest.
To solve this the global variable was replaced by a interrupt domain
specific flag, which is set by the generic XEN PCI/MSI domain, but not
by VMD or any other domain in the system.
So far, so good. But the implementation (and the reviewer) missed the
fact, that accessing the domain flag cannot be done directly because
there are at least two situations, where this fails.
Legacy architectures are not providing interrupt domains at all. The
new MSI parent domains do not require to have a domain info pointer.
Both cases result in a unconditional NULL pointer derefence.
The PCI/MSI code already has a function to query the MSI domain
specific flag in a safe way, which handles all possible cases of
PCI/MSI backends.
So the fix it simply to replace the open coded checks by invoking the
safe helper to query the flag"
* tag 'irq-urgent-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Handle the NOMASK flag correctly for all PCI/MSI backends
Pull mtd updates from Miquel Raynal:
"MTD changes:
- The atmel,dataflash binding has been converted to yaml and the
physmap one constrained. Some logs are improved, error path are
getting reworked a bit, few patches target the use of
str_enabled_disabled().
Raw NAND changes:
- i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
SPI NAND changes:
- OTP support has been brought, and ESMT and Micron manufacturer
drivers implement it.
- Read retry, and Macronix manufacturer driver implement it.
SPI NOR changes:
- Adding support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start
using the scope based mutex cleanup helpers.
There is also a bunch of minor improvements and fixes in drivers
and bindings"
* tag 'mtd/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (34 commits)
dt-bindings: mtd: atmel,dataflash: convert txt to yaml
mtd: mchp48l640: Use str_enable_disable() in mchp48l640_write_prepare()
mtd: rawnand: gpmi: Use str_enabled_disabled() in gpmi_nand_attach_chip()
mtd: mtdpart: Do not supply NULL to printf()
dt-bindings: mtd: gpmi-nand: Add compatible string for i.MX8 chips
mtd: nand: Fix a kdoc comment
mtd: spinand: Improve spinand_info macros style
mtd: spi-nor: drop unused <linux/of_platform.h>
mtd: spi-nor: explicitly include <linux/of.h>
mtd: spi-nor: explicitly include <linux/math64.h>
mtd: spi-nor: macronix: add support for mx66{l2, u1}g45g
mtd: spi-nor: macronix: Add post_sfdp fixups for Quad Input Page Program
mtd: Fix error handling in mtd_device_parse_register() error path
mtd: capture device name setting failure when adding mtd
mtd: Add check for devm_kcalloc()
mtd: Replace kcalloc() with devm_kcalloc()
dt-bindings: mtd: physmap: Ensure all properties are defined
mtd: rawnand: brcmnand: fix PM resume warning
dt-bindings: mtd: mxc-nand: Document fsl,imx31-nand
mtd: spinand: macronix: Add support for read retry
...
Pull HID updates from Jiri Kosina:
- PlayStation 5 controllers support (Alex Henrie)
- big revamp and modernization of the aged hid-pidff force feedback
driver (Tomasz Pakuła)
- conversion of hid-lg-g15 to standard multicolor LED API (Kate Hsuan)
- improvement of behavior of Human Presence Sensor (HPD) in amd_sfh
driver (Mario Limonciello)
- other assorted fixes, code cleanups and device ID additions
* tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (70 commits)
HID: remove superfluous (and wrong) Makefile entry for CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
HID: Intel-thc-hid: Intel-quickspi: Correct device state names gramatically
HID: wacom: Remove static WACOM_PKGLEN_MAX limit
HID: amd_sfh: Don't show wrong status for amd_sfh_hpd_info()
HID: amd_sfh: Default to HPD disabled
HID: amd_sfh: Allow configuring whether HPD is enabled or disabled
HID: pidff: Fix set_device_control()
HID: pidff: Fix 90 degrees direction name North -> East
HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff
HID: pidff: Clamp effect playback LOOP_COUNT value
HID: pidff: Rename two functions to align them with naming convention
HID: lenovo: silence unreachable code warning
HID: lenovo: Fix to ensure the data as __le32 instead of u32
HID: bpf: add a v6.11+ compatible BPF fixup for the XPPen ACK05 remote
HID: bpf: new hid_bpf_async.h common header
HID: bpf: import new kfunc from v6.10 & v6.11
HID: bpf: add support for the XP-Pen Artist Pro 19 (gen2)
HID: bpf: Added updated Kamvas Pro 19 descriptor
HID: bpf: Suppress bogus F13 trigger on Sirius keyboard full fan shortcut
HID: bpf: Add support for the default firmware mode of the Huion K20
...
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
* Raw NAND changes:
i.MX8 and i.MX31 now have their own compatible, the Qcom driver got
cleaned, the Broadcom driver got fixed.
* SPI NAND changes:
Two main features have been added:
- OTP support has been brought, and ESMT and Micron manufacturer drivers
implement it.
- Read retry, and Macronix manufacturer driver implement it.
There is as well a bunch of minor improvements and fixes in drivers and
bindings.
SPI NOR adds support for few flashes. Few cleanup patches for the core
driver, where we touched the headers inclusion list and we start using
the scope based mutex cleanup helpers.
Pull sound updates from Takashi Iwai:
"We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific, little
about the core changes. Some highlights below:
Core:
- A couple of (rather minor) race fixes in ALSA sequencer code
- A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
- A large series of code conversion to use modern terminology for the
clocking configuration
- Conversions of PM ops with the modern macros in all ASoC drivers
- Clarification of the control operations
- Prepartory work for more generic SoundWire SCDA controls
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
- Conversions of PM ops with the modern macros in the rest drivers
- USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
- HD-audio quirks and fixes ASUS, HP, Lenovo, and others"
* tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (651 commits)
ALSA: hda: tas2781-i2c: Remove unnecessary NULL check before release_firmware()
ALSA: hda: cs35l56: Remove unnecessary NULL check before release_firmware()
ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA
ALSA: hda/realtek: Add support for various HP Laptops using CS35L41 HDA
ALSA: timer: Don't take register_mutex with copy_from/to_user()
ASoC: SDCA: Correct handling of selected mode DisCo property
ASoC: amd: yc: update quirk data for new Lenovo model
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315
ASoC: SOF: mediatek: Commonize duplicated functions
ASoC: dmic: Fix NULL pointer dereference
ASoC: wm8904: add DMIC support
ASoC: wm8904: get platform data from DT
ASoC: dt-bindings: wm8904: Add DMIC, GPIO, MIC and EQ support
ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF
of: Add of_property_read_u16_index
ALSA: oxygen: Fix dependency on CONFIG_PM_SLEEP
ASoC: ops: Apply platform_max after deciding control type
ASoC: ops: Remove some unnecessary local variables
...
Merge in late fixes to prepare for the 6.15 net-next PR.
No conflicts, adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
919f9f497d ("eth: bnxt: fix out-of-range access of vnic_info array")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After merging the apparmor tree, today's linux-next build (x86_64
allmodconfig) failed like this:
security/apparmor/af_unix.c: In function 'unix_state_double_lock':
security/apparmor/af_unix.c:627:17: error: implicit declaration of function 'unix_state_lock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
627 | unix_state_lock(sk1);
| ^~~~~~~~~~~~~~~
| unix_state_double_lock
security/apparmor/af_unix.c: In function 'unix_state_double_unlock':
security/apparmor/af_unix.c:642:17: error: implicit declaration of function 'unix_state_unlock'; did you mean 'unix_state_double_lock'? [-Wimplicit-function-declaration]
642 | unix_state_unlock(sk1);
| ^~~~~~~~~~~~~~~~~
| unix_state_double_lock
Caused by commit
c05e705812 ("apparmor: add fine grained af_unix mediation")
interacting with commit
84960bf240 ("af_unix: Move internal definitions to net/unix/.")
from the net-next tree.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patch.msgid.link/20250326150148.72d9138d@canb.auug.org.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, the condition for invalidating the tx flow in
mctp_i2c_invalidate_tx_flow() checked if `rc` was nonzero.
However, this could incorrectly trigger the invalidation
even when `rc > 0` was returned as a success status.
This patch updates the condition to explicitly check for `rc < 0`,
ensuring that only error cases trigger the invalidation.
Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
This patch series is focused on improving the compatibility and usability of the
hid-pidff force feedback driver. Last patch introduces a new, universal driver
for PID devices that need some special handling like report fixups, remapping the
button range, managing new pidff quirks and setting desirable fuzz/flat values.
This work has been done in the span of the past months with the help of the great
Linux simracing community, with a little input from sim flight fans from FFBeast.
No changes interfere with compliant and currently working PID devices.
"Generic" codepath was tested as well with Moza and Simxperience AccuForce v2.
I'm not married to the name. It's what we used previously, but if "universal" is
confusing (pidff is already the generic driver), we can come up with something
better like "hid-quirky-pidff" :)
With v8 and tiny finx in v9, all the outstanding issues were resolved,
additional pidff issues were fixed and hid-pidff defines moved to a dedicated
header file. This patch series could be considered done bar any comments and
requests from input maintainers.
I could save more then a dozen lines of code by changing simple if statements
to only occupy on line instead of two in there's a need for that.
From: Mario Limonciello <mario.limonciello@amd.com>
Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detected a wake event will be emitted from the
sensor fusion hub that software can react to.
Example use cases are "wake from suspend on approach" or to "lock
when leaving".
This is currently enabled by default on supported systems, but users
can't control it. This essentially means that wake on approach is
enabled which is a really surprising behavior to users that don't
expect it.
Instead of defaulting to enabled add a sysfs knob that users can
use to enable the feature if desirable and set it to disabled by
default.
Pull auxdisplay updates from Andy Shevchenko:
- Refactor a couple of APIs to reduce amount of calls to memory
allocator
- Miscellaneous small fixes and improvements
* tag 'auxdisplay-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: hd44780: Rename hd to hdc in hd44780_common_alloc()
auxdisplay: hd44780: Call charlcd_alloc() from hd44780_common_alloc()
auxdisplay: panel: Make use of hd44780_common_free()
auxdisplay: hd44780: Make use of hd44780_common_free()
auxdisplay: hd44780: Introduce hd44780_common_free()
auxdisplay: lcd2s: Allocate memory for custom data in charlcd_alloc()
auxdisplay: charlcd: Partially revert "Move hwidth and bwidth to struct hd44780_common"
auxdisplay: panel: Fix an API misuse in panel.c
auxdisplay: hd44780: Fix an API misuse in hd44780.c
auxdisplay: MAX6959 should select BITREVERSE
auxdisplay: seg-led-gpio: use gpiod_multi_set_value_cansleep
Pull chrome platform updates from Tzung-Bi Shih:
- Support ACPI match for Framework systems
- Expose new sysfs for:
- PD mux status for each EC-managed Type-C port
- EC feature of AP mode entry
- Setting USB mode of EC Type-C
* tag 'chrome-platform-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Add support for setting USB mode via sysfs
platform/chrome: cros_ec_sysfs: Expose AP_MODE_ENTRY feature state
platform/chrome: cros_ec_sysfs: Expose PD mux status
platform/chrome: cros_ec_lpc: Match on Framework ACPI device
MAINTAINERS: Update maintainers for ChromeOS USBC related drivers
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add dev_pm_genpd_rpm_always_on() to support more fine-grained PM
pmdomain providers:
- arm: Remove redundant state verification for the SCMI PM domain
- bcm: Add system-wakeup support for bcm2835 via GENPD_FLAG_ACTIVE_WAKEUP
- rockchip: Add support for regulators
- rockchip: Use SMC call to properly inform firmware
- sunxi: Add V853 ppu support
- thead: Add support for RISC-V TH1520 power-domains
firmware:
- Add support for the AON firmware protocol for RISC-V THEAD
cpuidle-psci:
- Update section in MAINTAINERS for cpuidle-psci
- Add trace support for PSCI domain-idlestates"
* tag 'pmdomain-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (29 commits)
firmware: thead: add CONFIG_MAILBOX dependency
firmware: thead,th1520-aon: Fix use after free in th1520_aon_init()
pmdomain: arm: scmi_pm_domain: Remove redundant state verification
pmdomain: thead: fix TH1520_AON_PROTOCOL dependency
pmdomain: thead: Add power-domain driver for TH1520
dt-bindings: power: Add TH1520 SoC power domains
firmware: thead: Add AON firmware protocol driver
dt-bindings: firmware: thead,th1520: Add support for firmware node
pmdomain: rockchip: add regulator dependency
pmdomain: rockchip: add regulator support
pmdomain: rockchip: fix rockchip_pd_power error handling
pmdomain: rockchip: reduce indentation in rockchip_pd_power
pmdomain: rockchip: forward rockchip_do_pmu_set_power_domain errors
pmdomain: rockchip: cleanup mutex handling in rockchip_pd_power
dt-bindings: power: rockchip: add regulator support
pmdomain: rockchip: Fix build error
pmdomain: imx: gpcv2: use proper helper for property detection
MAINTAINERS: Update section for cpuidle-psci
pmdomain: rockchip: Check if SMC could be handled by TA
cpuidle: psci: Add trace for PSCI domain idle
...
Pull MMC updates from Ulf Hansson:
"MMC host:
- atmel-mci: Convert DT bindings to json schema
- dw_mmc: Add support for the Exynos7870 variant
- dw_mmc-rockchip: Add support for the RK3562/3528 variants
- omap: Fix potential memory leak in the probe error path
- renesas_sdhi: Add support for RZ/G3E variants
- sdhci: Disable SD card clock before changing parameters
- sdhci-esdhc-imx: Add support for the i.MX94 variant
- sdhci-of-dwcmshc: Add support for the RK3562/RK3528 variants
- sdhci-omap: Disable aggressive PM for eMMC/SD-cards
- sdhci-pci-core: Wait for VDD to settle on card power off
- sdhci-pxav3: Fix busy-signalling by using MMC_CAP_NEED_RSP_BUSY
- sunxi-mmc: Add support for the A523 variant
MEMSTICK:
- rtsx_usb_ms: Fix potential use-after-free during remove"
* tag 'mmc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits)
mmc: core: Remove redundant null check
mmc: host: Wait for Vdd to settle on card power off
mmc: omap: Fix memory leak in mmc_omap_new_slot
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
mmc: renesas_sdhi: fix error code in renesas_sdhi_probe()
mmc: sdhci-pxav3: set NEED_RSP_BUSY capability
mmc: sdhci-omap: Disable MMC_CAP_AGGRESSIVE_PM for eMMC/SD
tty: mmc: sdio: use bool for cts and remove parentheses
dt-bindings: mmc: sunxi: add compatible strings for Allwinner A523
dt-bindings: mmc: sunxi: Simplify compatible string listing
dt-bindings: mmc: sdhci-of-dwcmhsc: Add compatible string for RK3528
dt-bindings: mmc: rockchip-dw-mshc: Add compatible string for RK3528
mmc: renesas_sdhi: Add support for RZ/G3E SoC
dt-bindings: mmc: renesas,sdhi: Document RZ/G3E support
dt-bindings: mmc: rockchip-dw-mshc: Add support for rk3562
dt-bindings: mmc: Add support for rk3562 eMMC
mmc: core: Trim trailing whitespace from card product names
dt-bindings: mmc: atmel,hsmci: Convert to json schema
dt-bindings: mmc: mmc-slot: Make compatible property optional
dt-bindings: mmc: fsl-imx-esdhc: Add i.MX94 support
...
Pull gpio updates from Bartosz Golaszewski:
"There are no new drivers this time but several changes to the core
GPIO framework and various driver updates.
This release cycle, we're starting a relatively straightforward but
tedious rework of the GPIO consumer API: for historical reasons, the
gpiod_set_value() variants would return void. Not only that but the
GPIO provider interface does not even allow drivers to return a value
to GPIO core. This is because initial GPIO controllers would be MMIO
based and could not fail. We've had I2C, SPI and USB controllers for
years too but no way of indicating failures to callers.
This changes the consumer interface, adds new provider callbacks and
starts converting the drivers under drivers/gpio/ to using them. Once
this gets upstream, we'll keep on converting GPIO drivers that live
elsewhere and once there are no more users of the old callbacks, we'll
remove them and rename the new ones to the previous name. I imagine
the last step would happen in one sweeping change like what you did
for the remove_new() -> remove() renaming.
We've also addressed an issue where invalid return values from GPIO
drivers would get propagated to user-space by adding some
GPIO-core-level sanitization. Again: not a complex change but way
overdue.
Other than that: lots of driver and core refactoring, DT-bindings
changes and some other minor changes like coding style fixes or header
reordering.
GPIO core:
- add sanitization of return values of GPIO provider callbacks so
that invalid ones don't get propagated to user-space
- add new variants of the line setter callbacks for GPIO providers
that return an integer and allow to indicate driver errors to the
GPIO core
- change the interface of all gpiod_set_value() variants to return an
integer thus becoming able to indicate failures in the underlying
layer to callers
- drop unneeded ERR_CAST in gpiolib-acpi
- use for_each_if() where applicable
- provide gpiod_multi_set_value_cansleep() as a new, simpler
interface to gpiod_set_array_value_cansleep() and use it across
several drivers treewide
- reduce the number of atomic reads of the descriptor flags in
gpiolib debugfs code
- simplify for_each_hwgpio_in_range() and
for_each_requested_gpio_in_range()
- add support for three-cell GPIO specifiers in GPIO OF code
- don't build HTE (hardware timestamp engine) GPIO code with the HTE
subsystem disabled in Kconfig
- unduplicate calls to gpiod_direction_input_nonotify()
- rework the handling of the valid_mask property of GPIO chips: don't
allow drivers to set it as it should only be handled by GPIO core
and start actually enforcing it in GPIO core for *all* drivers, not
only the ones implementing a custom request() callback
- get the `ngpios` property from the fwnode of the GPIO chip, not its
device in order to handle multi-bank GPIO chips
Driver improvements:
- convert a part of the GPIO drivers under drivers/gpio/ to using the
new value setter callbacks
- convert several drivers to using automatic lock guards from
cleanup.h
- allow building gpio-bt8xx with COMPILE_TEST=y
- refactor gpio-74x164 (use devres, cleanup helpers, __counted_by()
and bits.h macros)
- refactor gpio-latch (use generic device properties, lock guards and
some local variables for better readability)
- refactor gpio-xilinx (improve the usage of the bitmap API)
- support multiple virtual GPIO controller instances in gpio-virtio
- allow gpio-regmap to use the standard `ngpios` property from
GPIOLIB
- factor out the common code for synchronous probing of virtual GPIO
devices into its own library
- use str_enable_disable(), str_high_low() and other string helpers
where applicable
- extend the gpio-mmio abstraction layer to allow calling into the
pinctrl back-end when setting direction
- convert gpio-vf610 to using the gpio-mmio library
- use more devres in gpio-adnp
- add support for reset-gpios in gpio-pcf857x
- add support for more models to gpio-loongson-64bit
DT bindings:
- add new compatibles to gpio-vf610 and gpio-loongson
- add missing gpio-ranges property to gpio-mvebu
- add reset-gpios to nxp,pcf8575
- enable gpio-hog parsing in ast2400-gpio
Misc:
- coding style improvements
- kerneldoc fixes
- includes reordering
- updates to the TODO list"
* tag 'gpio-updates-for-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (119 commits)
gpio: TODO: add an item to track reworking the sysfs interface
gpio: TODO: add an item to track the conversion to the new value setters
gpio: TODO: add delimiters between tasks for better readability
gpio: TODO: remove the pinctrl integration task
gpio: TODO: remove task duplication
gpio: TODO: remove the item about the new debugfs interface
gpio: da9055: use new line value setter callbacks
gpio: da9052: use new line value setter callbacks
gpio: cs5535: use new line value setter callbacks
gpio: crystalcove: use new line value setter callbacks
gpio: cros-ec: use new line value setter callbacks
gpio: creg-snps: use new line value setter callbacks
gpio: cgbc: use new line value setter callbacks
gpio: bt8xx: use new line value setter callbacks
gpio: bt8xx: use lock guards
gpio: bt8xx: allow to build the module with COMPILE_TEST=y
gpio: bd9571mwv: use new line value setter callbacks
gpio: bd71828: use new line value setter callbacks
gpio: bd71815: use new line value setter callbacks
gpio: bcm-kona: use new line value setter callbacks
...
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for HTU31
- Congatec Board Controller monitoring driver
- Driver for TI INA233 Current and Power Monitor
Support for additional chips or boards in existing drivers:
- pmbus/ltc2978: Add support for LT717x and LTM4673
- asus-ec-sensors: Add PRIME X670E-PRO WIFI
- k10temp: Add support for cyan skillfish
- nct6683: Add customer ID for AMD BC-250
- lm90: Add support for NCT7716, NCT7717 and NCT7718
Other notable improvements in existing drivers:
- emc2305: Add devicetree support, and use
devm_thermal_of_cooling_device_register
- acpi_power_meter: Convert to with_info API
- dell-smm: Increase the number of fans
- pmbus/core: Optimize debugfs support and use i2c_client
debugfs directory
- hwmon core: Fix the missing of 'average' word in
hwmon_power_attr_templates
- Various drivers: Use per-client debugfs entry provided by
I2C subsystem"
* tag 'hwmon-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
hwmon: emc2305: Use devm_thermal_of_cooling_device_register
hwmon: emc2305: Add OF support
dt-bindings: hwmon: Add Microchip emc2305 support
dt-bindings: hwmon: Drop stray blank line in the header
hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register
hwmon: add driver for HTU31
dt-bindings: hwmon: Add description for sensor HTU31
hwmon: Add driver for TI INA233 Current and Power Monitor
dt-bindings: hwmon: ti,ina2xx: Add INA233 device
hwmon: Add Congatec Board Controller monitoring driver
hwmon: (pmbus/ltc2978) add support for lt717x
dt-bindings: hwmon: ltc2978: add support for LT717x
hwmon: (pmbus/ltc2978) Add support for LT717x - docs
hwmon: (dell-smm) Increment the number of fans
hwmon: (ntc_thermistor) return error instead of clipping on OOB
hwmon: (pt5161l) Use per-client debugfs entry
hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates
hwmon: (acpi_power_meter) Fix the fake power alarm reporting
hwmon: (gpio-fan) Add missing mutex locks
dt-bindings: hwmon: gpio-fan: Add optional regulator support
...
Pull pwm updates from Uwe Kleine-König:
"Here comes the usual mix of cleanups, new dt-bindings for existing
drivers and nexus nodes; and a new driver for the pwm subsystem.
Patches were contributed by Andy Shevchenko, Chen Wang, Chukun Pan,
Frank Li, Herve Codina, Kever Yang, and Nam Cao. Patch feedback was
provided by Andy Shevchenko, Conor Dooley, Daniel Mack, Duje
Mihanović, Heiko Stuebner, Herve Codina, Krzysztof Kozlowski, Neil
Armstrong, Rob Herring, and Zack Rusin. Thanks to all of them"
* tag 'pwm/for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
dt-bindings: pwm: imx: Add i.MX93, i.MX94 and i.MX95 support
dt-bindings: pwm: rockchip: Add rockchip,rk3528-pwm
pwm: stmpe: Allow to compile as a module
pwm: Check for CONFIG_PWM using IS_REACHABLE() in main header
dt-bindings: pwm: rockchip: Add rockchip,rk3562-pwm
pwm: Strengthen dependency for PWM_SIFIVE
pwm: clps711x: Drop of_match_ptr() usage for .of_match_table
pwm: pca9685: Drop ACPI_PTR() and of_match_ptr()
pwm: Add support for pwm nexus dt bindings
dt-bindings: pwm: Add support for PWM nexus node
pwm: Add upgrade path to #pwm-cells = <3> for users of of_pwm_single_xlate()
pwm: gpio: Switch to use hrtimer_setup()
pwm: sophgo: add driver for Sophgo SG2042 PWM
dt-bindings: pwm: sophgo: add PWM controller for SG2042
pwm: lpss: Only include <linux/pwm.h> where needed
Pull spi updates from Mark Brown:
"The biggest change for SPI this release is the addition of offload
support from David Lechner, allowing the hardware to trigger SPI
transactions autonomously. The initial use case is for triggering IIO
operations but there are other applications where having the hardware
ready to go at a minimal signal is useful for synchronising with
external inputs (eg, interrupt handling) or reducing latency (eg, CAN
networking).
Otherwise there's the usual fixes, improvements and cleanups, plus
support for a bunch of new devices.
- Support for offloading support from David Lechner
- Support for GOcontrol1 Moduline modules, Mediatek MT7988, NXP
i.MX94, Qualcomm SPI NAMD, Rockchip RK3562, Sophogo SG2044 and ST
STM32 OSPI"
* tag 'spi-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
spi: spi-mem: Introduce a default ->exec_op() debug log
spi: dt-bindings: cdns,qspi-nor: Require some peripheral properties
spi: dt-bindings: cdns,qspi-nor: Deprecate the Cadence compatible alone
spi: dt-bindings: cdns,qspi-nor: Be more descriptive regarding what this controller is
spi: stm32-ospi: Include "gpio/consumer.h"
MAINTAINERS: adjust the file entry in GOCONTROLL MODULINE MODULE SLOT
spi: spi-qpic-snand: avoid memleak in qcom_spi_ecc_init_ctx_pipelined()
spi: spi-mux: Fix coverity issue, unchecked return value
spi: sophgo: fix incorrect type for ret in sg2044_spifmc_write()
spi: sg2044-nor: fix uninitialized variable in probe
spi: sg2044-nor: fix signedness bug in sg2044_spifmc_write()
spi: sg2044-nor: Convert to dev_err_probe()
spi: sg2044-nor: Fully convert to device managed resources
dt-bindings: spi: add compatibles for mt7988
spi: spidev: Add an entry for the gocontroll moduline module slot
MAINTAINERS: add maintainer for the GOcontroll Moduline module slot
dt-bindings: connector: Add the GOcontroll Moduline module slot bindings
dt-bindings: vendor-prefixes: add GOcontroll
spi: Use inclusive language
spi: cadence-qspi: Improve spi memory performance
...
Pull regulator updates from Mark Brown:
"This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling.
- A rework of the handling of LDO5 on the PCA9450, this was quite
wrong in how it handled the SD_VSEL conrol and only worked for some
system designs. This includes a DTS update since there was a not
quite ABI compatible change as part of the fix
- A devres change introducing devm_kmemdup_array() was pulled in so
it could be used with some regulator conversions to that function,
this pulled in some other devres and IIO stuff that was part of the
same pull request
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed
- Support for the NXP PF9453"
* tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: axp20x: AXP717: dcdc4 doesn't have delay
regulator: dt-bindings: rtq2208: Cleanup whitespace
regulator: dt-bindings: rtq2208: Mark fixed LDO VOUT property as deprecated
regulator: rtq6752: make const read-only array fault_mask static
regulator: pf9453: add PMIC PF9453 support
regulator: dt-bindings: pca9450: Add nxp,pf9453 compatible string
regulator: pcf50633-regulator: Remove
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
regulator: cros-ec: use devm_kmemdup_array()
regulator: devres: use devm_kmemdup_array()
regulator: Add (devm_)of_regulator_get()
devres: Introduce devm_kmemdup_array()
iio: imu: st_lsm9ds0: Replace device.h with what is needed
driver core: Split devres APIs to device/devres.h
err.h: move IOMEM_ERR_PTR() to err.h
regulator: pca9450: Remove duplicate code in probe
regulator: ad5398: Fix incorrect power down bit mask
regulator: pca9450: Fix enable register for LDO5
regulator: pca9450: Fix control register for LDO5
Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
...
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
Pull fscrypt updates from Eric Biggers:
"A fix for an issue where CONFIG_FS_ENCRYPTION could be enabled without
some of its dependencies, and a small documentation update"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: mention init_on_free instead of page poisoning
fscrypt: drop obsolete recommendation to enable optimized ChaCha20
Revert "fscrypt: relax Kconfig dependencies for crypto API algorithms"
Pull fsverity updates from Eric Biggers:
"A fix for an issue where CONFIG_FS_VERITY could be enabled without
some of its dependencies, and a small documentation update"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
Revert "fsverity: relax build time dependency on CRYPTO_SHA256"
Documentation: add a usecase for FS_IOC_READ_VERITY_METADATA
Pull smack updates from Casey Schaufler:
"This is a larger set of patches than usual, consisting of a set of
build clean-ups, a rework of error handling in setting up CIPSO label
specification and a bug fix in network labeling"
* tag 'Smack-for-6.15' of https://github.com/cschaufler/smack-next:
smack: recognize ipv4 CIPSO w/o categories
smack: Revert "smackfs: Added check catlen"
smack: remove /smack/logging if audit is not configured
smack: ipv4/ipv6: tcp/dccp/sctp: fix incorrect child socket label
smack: dont compile ipv6 code unless ipv6 is configured
Smack: fix typos and spelling errors
