Both PF and VF have rx-vlan-offload enabled, however, the PCVLANR1/2
registers are resources controlled by PF, so VF cannot access these
two registers. Fortunately, the hardware provides SICVLANR1/2 registers
for each SI to reflect the value of PCVLANR1/2 registers. Therefore,
use SICVLANR1/2 instead of PCVLANR1/2. Note that this is not an issue
in actual use, because the current driver does not support custom TPID,
the driver will not access these two registers in actual use, so this
modification is just an optimization.
In addition, since ENETC_RXBD_FLAG_TPID is defined as GENMASK(1, 0),
the possible values are only 0, 1, 2, 3, so the default branch will
never be true, so remove the default branch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250613093605.39277-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Uniquely, this driver supports only the SET operation. It does not
support GET at all. The SET callback also always returns 0, even
tho it checks a bunch of conditions, and if my quick reading is
right, expects the user to insert filtering rules for given flow
type first? Long story short it seems too convoluted to easily
add the GET as part of the conversion.
Link: https://patch.msgid.link/20250613172751.3754732-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: remove phy_driver_is_genphy and phy_driver_is_genphy_10g
Replace phy_driver_is_genphy() and phy_driver_is_genphy_10g()
with a new flag in struct phy_device.
====================
Link: https://patch.msgid.link/5778e86e-dd54-4388-b824-6132729ad481@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new flag phydev->is_genphy_driven to simplify this function.
Note that this includes a minor functional change:
Now this function returns true if ANY of the genphy drivers
is bound to the PHY device.
We have only one user in DSA driver mt7530, and there the
functional change doesn't matter.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/c9ac3a7d-262a-425d-9153-97fe3ca6280a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
eth: intel: migrate to new RXFH callbacks
Migrate Intel drivers to the recently added dedicated .get_rxfh_fields
and .set_rxfh_fields ethtool callbacks.
Note that I'm deleting all the boilerplate kdoc from the affected
functions in the more recent drivers. If the maintainers feel strongly
I can respin and add it back, but it really feels useless and undue
burden for refactoring. No other vendor does this.
v1: https://lore.kernel.org/20250613010111.3548291-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250614180907.4167714-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed and it's the only
get_rxnfc sub-command the driver supports. So convert the get_rxnfc
handler into a get_rxfh_fields handler.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250614180638.4166766-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is purely factoring out the handling into a helper.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250614180638.4166766-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is purely factoring out the handling into a helper.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250614180638.4166766-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep says:
====================
CN20K silicon with mbox support
CN20K is the next generation silicon in the Octeon series with various
improvements and new features.
Along with other changes the mailbox communication mechanism between RVU
(Resource virtualization Unit) SRIOV PFs/VFs with Admin function (AF) has
also gone through some changes.
Some of those changes are
- Separate IRQs for mbox request and response/ack.
- Configurable mbox size, default being 64KB.
- Ability for VFs to communicate with RVU AF instead of going through
parent SRIOV PF.
Due to more memory requirement due to configurable mbox size, mbox memory
will now have to be allocated by
- AF (PF0) for communicating with other PFs and all VFs in the system.
- PF for communicating with it's child VFs.
On previous silicons mbox memory was reserved and configured by firmware.
This patch series add basic mbox support for AF (PF0) <=> PFs and
PF <=> VFs. AF <=> VFs communication and variable mbox size support will
come in later.
Patch #1 Supported co-existance of bit encoding PFs and VFs in 16-bit
hardware pcifunc format between CN20K silicon and older octeon
series. Also exported PF,VF masks and shifts present in mailbox
module to all other modules.
Patch #2 Added basic mbox operation APIs and structures to support both
CN20K and previous version of silicons.
Patch #3 This patch adds support for basic mbox infrastructure
implementation for CN20K silicon in AF perspective. There are
few updates w.r.t MBOX ACK interrupt and offsets in CN20k.
Patch #4 Added mbox implementation between NIC PF and AF for CN20K.
Patch #5 Added mbox communication support between AF and AF's VFs.
Patch #6 This patch adds support for MBOX communication between NIC PF and
its VFs.
====================
Link: https://patch.msgid.link/1749639716-13868-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Number of RVU PFs on CN20K silicon have increased to 96 from maximum
of 32 that were supported on earlier silicons. Every RVU PF and VF is
identified by HW using a 16bit PF_FUNC value. Due to the change in
Max number of PFs in CN20K, the bit encoding of this PF_FUNC has changed.
This patch handles the change by using helper functions(using silicon
check) to use PF,VF masks and shifts to support both new silicon CN20K,
OcteonTx series. These helper functions are used in different modules.
Also moved the NIX AF register offset macros to other files which
will be posted in coming patches.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/1749639716-13868-2-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
seg6: Allow End.X behavior to accept an oif
Patches #1-#3 gradually extend the End.X behavior to accept an output
interface as an optional argument. This is needed for cases where user
space wishes to specify an IPv6 link-local address as the nexthop
address.
Patch #4 adds test cases to the existing End.X selftest to cover the new
functionality.
====================
Link: https://patch.msgid.link/20250612122323.584113-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current test topology, all the routers are connected to each
other via dedicated links with addresses of the form fcf0:0:x:y::/64.
The test configures rt-3 with an adjacency with rt-4 and rt-4 with an
adjacency with rt-1:
# ip -n rt_3-IgWSBJ -6 route show tab 90 fcbb:0:300::/48
fcbb:0:300::/48 encap seg6local action End.X nh6 fcf0:0:3:4::4 flavors next-csid lblen 32 nflen 16 dev dum0 metric 1024 pref medium
# ip -n rt_4-JdCunK -6 route show tab 90 fcbb:0:400::/48
fcbb:0:400::/48 encap seg6local action End.X nh6 fcf0:0:1:4::1 flavors next-csid lblen 32 nflen 16 dev dum0 metric 1024 pref medium
The routes are used when pinging hs-2 from hs-1 and vice-versa.
Extend the test to also cover End.X behavior with an IPv6 link-local
nexthop address and an output interface. Configure every router
interface with an IPv6 link-local address of the form fe80:❌y/64 and
before re-running the ping tests, replace the previous End.X routes with
routes that use the new IPv6 link-local addresses:
# ip -n rt_3-IgWSBJ -6 route show tab 90 fcbb:0:300::/48
fcbb:0:300::/48 encap seg6local action End.X nh6 fe80::4:3 oif veth-rt-3-4 flavors next-csid lblen 32 nflen 16 dev dum0 metric 1024 pref medium
# ip -n rt_4-JdCunK -6 route show tab 90 fcbb:0:400::/48
fcbb:0:400::/48 encap seg6local action End.X nh6 fe80::1:4 oif veth-rt-4-1 flavors next-csid lblen 32 nflen 16 dev dum0 metric 1024 pref medium
The new test cases fail without the previous patch ("seg6: Allow End.X
behavior to accept an oif"):
# ./srv6_end_x_next_csid_l3vpn_test.sh
[...]
################################################################################
TEST SECTION: SRv6 VPN connectivity test hosts (h1 <-> h2, IPv6), link-local
################################################################################
TEST: IPv6 Hosts connectivity: hs-1 -> hs-2 [FAIL]
TEST: IPv6 Hosts connectivity: hs-2 -> hs-1 [FAIL]
################################################################################
TEST SECTION: SRv6 VPN connectivity test hosts (h1 <-> h2, IPv4), link-local
################################################################################
TEST: IPv4 Hosts connectivity: hs-1 -> hs-2 [FAIL]
TEST: IPv4 Hosts connectivity: hs-2 -> hs-1 [FAIL]
Tests passed: 40
Tests failed: 4
And pass with it:
# ./srv6_end_x_next_csid_l3vpn_test.sh
[...]
################################################################################
TEST SECTION: SRv6 VPN connectivity test hosts (h1 <-> h2, IPv6), link-local
################################################################################
TEST: IPv6 Hosts connectivity: hs-1 -> hs-2 [ OK ]
TEST: IPv6 Hosts connectivity: hs-2 -> hs-1 [ OK ]
################################################################################
TEST SECTION: SRv6 VPN connectivity test hosts (h1 <-> h2, IPv4), link-local
################################################################################
TEST: IPv4 Hosts connectivity: hs-1 -> hs-2 [ OK ]
TEST: IPv4 Hosts connectivity: hs-2 -> hs-1 [ OK ]
Tests passed: 44
Tests failed: 0
Without the previous patch, rt-3 and rt-4 resolve the wrong routes for
the link-local nexthops, with the output interface being the input
interface:
# perf script
[...]
ping 1067 [001] 37.554486: fib6:fib6_table_lookup: table 254 oif 0 iif 11 proto 41 cafe::254/0 -> fe80::4:3/0 flowlabel 0xb7973 tos 0 scope 0 flags 2 ==> dev veth-rt-3-1 gw :: err 0
[...]
ping 1069 [002] 41.573360: fib6:fib6_table_lookup: table 254 oif 0 iif 12 proto 41 cafe::254/0 -> fe80::1:4/0 flowlabel 0xb7973 tos 0 scope 0 flags 2 ==> dev veth-rt-4-2 gw :: err 0
But the correct routes are resolved with the patch:
# perf script
[...]
ping 1066 [006] 30.672355: fib6:fib6_table_lookup: table 254 oif 13 iif 1 proto 41 cafe::254/0 -> fe80::4:3/0 flowlabel 0x85941 tos 0 scope 0 flags 6 ==> dev veth-rt-3-4 gw :: err 0
[...]
ping 1066 [006] 30.672411: fib6:fib6_table_lookup: table 254 oif 11 iif 1 proto 41 cafe::254/0 -> fe80::1:4/0 flowlabel 0x91de0 tos 0 scope 0 flags 6 ==> dev veth-rt-4-1 gw :: err 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the End.X behavior to accept an output interface as an optional
attribute and make use of it when resolving a route. This is needed when
user space wants to use a link-local address as the nexthop address.
Before:
# ip route add 2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6
# ip route add 2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6
$ ip -6 route show
2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 dev sr6 metric 1024 pref medium
2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6 metric 1024 pref medium
After:
# ip route add 2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6
# ip route add 2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6
$ ip -6 route show
2001:db8:1::/64 encap seg6local action End.X nh6 fe80::1 oif eth0 dev sr6 metric 1024 pref medium
2001:db8:2::/64 encap seg6local action End.X nh6 2001:db8:10::1 dev sr6 metric 1024 pref medium
Note that the oif attribute is not dumped to user space when it was not
specified (as an oif of 0) since each entry keeps track of the optional
attributes that it parsed during configuration (see struct
seg6_local_lwt::parsed_optattrs).
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
seg6_lookup_nexthop() is a wrapper around seg6_lookup_any_nexthop().
Change End.X behavior to invoke seg6_lookup_any_nexthop() directly so
that we would not need to expose the new output interface argument
outside of the seg6local module.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
seg6_lookup_any_nexthop() is called by the different endpoint behaviors
(e.g., End, End.X) to resolve an IPv6 route. Extend the function with an
output interface argument so that it could be used to resolve a route
with a certain output interface. This will be used by subsequent patches
that will extend the End.X behavior with an output interface as an
optional argument.
ip6_route_input_lookup() cannot be used when an output interface is
specified as it ignores this parameter. Similarly, calling
ip6_pol_route() when a table ID was not specified (e.g., End.X behavior)
is wrong.
Therefore, when an output interface is specified without a table ID,
resolve the route using ip6_route_output() which will take the output
interface into account.
Note that no endpoint behavior currently passes both a table ID and an
output interface, so the oif argument passed to ip6_pol_route() is
always zero and there are no functional changes in this regard.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250612122323.584113-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ziwei Xiao says:
====================
gve: Add Rx HW timestamping support
This patch series add the support of Rx HW timestamping, which sends
adminq commands periodically to the device for clock synchronization with
the NIC.
The ability to read the PHC from user space will be added in the
future patch series when adding the actual PTP support. For this patch
series, it's adding the initial ptp to utilize the ptp_schedule_worker
to schedule the work of syncing the NIC clock.
====================
Link: https://patch.msgid.link/20250614000754.164827-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement ndo_hwtstamp_get/set to enable hardware RX timestamping,
providing support for SIOC[SG]HWTSTAMP IOCTLs. Included with this support
is the small change necessary to read the rx timestamp out of the rx
descriptor, now that timestamps start being enabled. The gve clock is
only used for hardware timestamps, so started when timestamps are
requested and stopped when not needed.
This version only supports RX hardware timestamping with the rx filter
HWTSTAMP_FILTER_ALL. If the user attempts to configure a more
restrictive filter, the filter will be set to HWTSTAMP_FILTER_ALL in the
returned structure.
Signed-off-by: John Fraker <jfraker@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250614000754.164827-8-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the rx path to recover the high 32 bits of the full 64 bit rx
timestamp.
Use the low 32 bits of the last synced nic time and the 32 bits of the
timestamp provided in the rx descriptor to generate a difference, which
is then applied to the last synced nic time to reconstruct the complete
64-bit timestamp.
This scheme remains accurate as long as no more than ~2 seconds have
passed between the last read of the nic clock and the timestamping
application of the received packet.
Signed-off-by: John Fraker <jfraker@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250614000754.164827-7-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adminq commands for queues creation and destruction were not
consistently protected by the driver's adminq_lock. This was previously
benign as these operations were always initiated from contexts holding
kernel-level locks (e.g., rtnl_lock, netdev_lock), which provided
serialization.
Upcoming PTP aux_work will issue adminq commands directly from the
driver to read the NIC clock, without such kernel lock protection.
To prevent race conditions with this new PTP work, this patch ensures
the adminq_lock is held during queues creation and destruction.
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250614000754.164827-5-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
netpoll: Untangle netconsole and netpoll
Initially netpoll and netconsole were created together, and some
functions are in the wrong file. Seperate netconsole-only functions
in netconsole, avoiding exports.
1. Expose netpoll logging macros in the public header to enable consistent
log formatting across netpoll consumers.
2. Relocate netconsole-specific functions from netpoll to the netconsole
module where they are actually used, reducing unnecessary coupling.
3. Remove unnecessary function exports
4. Rename netpoll parsing functions in netconsole to better reflect their
specific usage.
5. Create a test to check that cmdline works fine. This was in my todo
list since [1], this was a good time to add it here to make sure this
patchset doesn't regress.
PS: The code was split in a way that it is easy to review. When copying
the functions from netpoll to netconsole, I do not change than other
than adding `static`. This will make checkpatch unhappy, but, further
patches will address the issues. It is done this way to make it easy for
reviewers.
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
v2: https://lore.kernel.org/20250611-rework-v2-0-ab1d92b458ca@debian.org
v1: https://lore.kernel.org/20250610-rework-v1-0-7cfde283f246@debian.org
====================
Link: https://patch.msgid.link/20250613-rework-v3-0-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new selftest to verify netconsole module loading with command
line arguments. This test exercises the init_netconsole() path and
validates proper parsing of the netconsole= parameter format.
The test:
- Loads netconsole module with cmdline configuration instead of
dynamic reconfiguration
- Validates message transmission through the configured target
- Adds helper functions for cmdline string generation and module
validation
This complements existing netconsole selftests by covering the
module initialization code path that processes boot-time parameters.
This test is useful to test issues like the one described in [1].
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-8-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the network device and namespace cleanup logic from the
cleanup() function into a new do_cleanup() helper in lib_netcons.sh.
The do_cleanup() function only unconfigure the network and
printk, while cleanup() cleans the netconsole targets plus the network
and printk.
This refactoring let this code to be reused in cases netconsole dynamic
is not being used, as in the upcoming patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-7-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename netpoll_parse_options() to netconsole_parser_cmdline() and
netpoll_print_options() to netconsole_print_banner() to better
describe what these functions actually do within the netconsole
context.
Also fix minor code style issues including variable declaration
ordering and spacing.
These functions are specific to netconsole functionality rather
than general netpoll operations, so the new names better reflect
their actual purpose.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-5-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move netpoll_print_options() from net/core/netpoll.c to
drivers/net/netconsole.c and make it static. This function is only used
by netconsole, so there's no need to export it or keep it in the public
netpoll API.
This reduces the netpoll API surface and improves code locality
by keeping netconsole-specific functionality within the netconsole
driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-4-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
