Disconnecting a DisplayLink device results in the following kernel
error messages
[ 93.041748] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.055299] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
[ 93.065363] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.078207] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
coming from KMS poll helpers. Shutting down poll helpers runs them
one final time when the USB device is already gone.
Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's
polling code already handles disconnects gracefully if the device has
been marked as unplugged.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1a981bd55 ("drm/udl: drop drm_driver.release hook")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303145604.62962-2-tzimmermann@suse.de
In addition to the standard reset controller, V3D 7.x requires configuring
the V3D_SMS registers for proper power on/off and reset. Add the new
registers to `v3d_regs.h` and ensure they are properly configured during
device probing, removal, and reset.
This change fixes GPU reset issues on the Raspberry Pi 5 (BCM2712).
Without exposing these registers, a GPU reset causes the GPU to hang,
stopping any further job execution and freezing the desktop GUI. The same
issue occurs when unloading and loading the v3d driver.
Link: https://github.com/raspberrypi/linux/issues/6660
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-5-f3ee7717ed17@igalia.com
In order to enforce per-SoC register rules, add per-compatible
restrictions. For example, V3D 3.3 (used in brcm,7268-v3d) has a cache
controller (GCA), which is not present in other V3D generations. Declaring
these differences helps ensure the DTB accurately reflect the hardware
design.
The example was using an incorrect order for the register names. This
commit corrects that by enforcing the order established in the register
items description.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-2-f3ee7717ed17@igalia.com
The V3D driver currently determines the GPU tech version (33, 41...)
by reading a register. This approach has worked so far since this
information wasn’t needed before powering on the GPU.
V3D 7.1 introduces new registers that must be written to power on the
GPU, requiring us to know the V3D version beforehand. To address this,
associate each supported SoC with the corresponding VideoCore GPU version
as part of the device data.
To prevent possible mistakes, add an assertion to verify that the version
specified in the device data matches the one reported by the hardware.
If there is a mismatch, the kernel will trigger a warning.
With the goal of maintaining consistency around the driver, use `enum
v3d_gen` to assign values to `v3d->ver` and for comparisons with other
V3D generations. Note that all mentions of unsupported or non-existing V3D
generations (such as V3D 4.0) were removed by this commit and replaced
with supported generations without functional changes.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-1-f3ee7717ed17@igalia.com
The TI sn65dsi86 driver follows the drm_encoder->crtc pointer that is
deprecated and shouldn't be used by atomic drivers.
Fortunately, the atomic hooks provide the drm_atomic_state and we can
access our current CRTC from that, going from the bridge to its encoder,
to its connector, and to its CRTC.
This bridge driver uses the atomic hooks already, but dereferences the
drm_encoder->crtc pointer in functions that don't have access to it.
Let's rework the driver to pass the state where needed, and remove the
need for the drm_encoder->crtc dereference.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-16-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tc358768 driver follows the drm_encoder->crtc pointer that is
deprecated and shouldn't be used by atomic drivers.
Fortunately, the atomic hooks provide the drm_atomic_state and we can
access our current CRTC from that, going from the bridge to its encoder,
to its connector, and to its CRTC.
Let's convert this bridge driver to atomic so we can get rid of the
drm_encoder->crtc dereference.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-15-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tc358768 bridge driver, if enabling it fails, tries to disable it.
This is pretty uncommon in bridge drivers, and also stands in the way
for further reworks.
Worse, since pre_enable and enable aren't expected to fail, disable and
post_disable might be called twice: once to handle the failure, and once
to actually disable the bridge.
Since post_disable uses regulators and clocks, this would lead to enable
count imbalances.
In order to prevent that imbalance, and to allow further reworks, let's
drop the calls to disable and post_disable, but keep the warning to let
users know about what's going on.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-14-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The tc358775 driver follows the drm_encoder->crtc pointer that is
deprecated and shouldn't be used by atomic drivers.
Fortunately, the atomic hooks provide the drm_atomic_state and we can
access our current CRTC from that, going from the bridge to its encoder,
to its connector, and to its CRTC.
Let's convert this bridge driver to atomic so we can get rid of the
drm_encoder->crtc dereference.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-13-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The Cadence DSI driver follows the drm_encoder->crtc pointer that is
deprecated and shouldn't be used by atomic drivers.
Fortunately, the atomic hooks provide the drm_atomic_state and we can
access our current CRTC from that, going from the bridge to its encoder,
to its connector, and to its CRTC.
Let's convert this bridge driver to atomic so we can get rid of the
drm_encoder->crtc dereference.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-12-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
With the bridges switching over to drm_bridge_connector, the direct
association between a bridge driver and its connector was lost.
This is mitigated for atomic bridge drivers by the fact you can access
the encoder, and then call drm_atomic_get_old_connector_for_encoder() or
drm_atomic_get_new_connector_for_encoder() with drm_atomic_state.
This was also made easier by providing drm_atomic_state directly to all
atomic hooks bridges can implement.
However, bridge drivers don't have a way to access drm_atomic_state
outside of the modeset path, like from the hotplug interrupt path or any
interrupt handler.
Let's introduce a function to retrieve the connector currently assigned
to an encoder, without using drm_atomic_state, to make these drivers'
life easier.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Co-developed-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-4-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Dumb buffers were not being freed because the GEM reference that was
acquired in gb_surface_define was not dropped like it is in the 2D case.
Dropping this ref uncovered a few additional issues with freeing the
resources associated with dirty tracking in vmw_bo_free/release.
Additionally the TTM object associated with the surface were also leaking
which meant that when the ttm_object_file was closed at process exit the
destructor unreferenced an already destroyed surface.
The solution is to remove the destructor from the vmw_user_surface
associated with the dumb_buffer and immediately unreferencing the TTM
object which his removes it from the ttm_object_file.
This also allows the early return in vmw_user_surface_base_release for the
dumb buffer case to be removed as it should no longer occur.
The chain of references now has the GEM handle(s) owning the dumb buffer.
The GEM handles have a singular GEM reference to the vmw_bo which is
dropped when all handles are closed. When the GEM reference count hits
zero the vmw_bo is freed which then unreferences the surface via
vmw_resource_release in vmw_bo_release.
Fixes: d6667f0ddf ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123204424.836896-1-ian.forbes@broadcom.com
Apple GPUs support non-linear "GPU-tiled" image layouts. Add modifiers
for these layouts. Mesa requires these modifiers to share non-linear
buffers across processes, but no other userspace or kernel support is
required/expected.
These layouts are notably not used for interchange across hardware
blocks (e.g. with the display controller). There are other layouts for
that but we don't support them either in userspace or kernelspace yet
(even downstream), so we don't add modifiers here.
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310-apple-twiddled-modifiers-v4-1-1ccac9544808@rosenzweig.io
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
