CIF_SIE indicates if a thread is running in SIE context. This is the
state of a thread and not the CPU. Therefore move this indicator to
thread info.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The low level machine check handler code fills the ptregs structure
partially with the register contents present at machine check handler
entry and partially with contents from the machine check save area.
In case of a machine check the contents of all general purpose
registers are saved by the CPU to the machine check save area.
Therefore simplify the code and fill the ptregs structure by only
using the machine check save area as source.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The alternative and the normal facility list are always identical. Remove
the alternative facility list, which allows to simplify the alternatives
code.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The nospec implementation is deeply integrated into the alternatives
code: only for nospec an alternative facility list is implemented and
used by the alternative code, while it is modified by nospec specific
needs.
Push down the nospec alternative handling into the nospec by
introducing a new alternative type and a specific nospec callback to
decide if alternatives should be applied.
Also introduce a new global nobp variable which together with facility
82 can be used to decide if nobp is enabled or not.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add the required code to patch alternatives early in the decompressor.
This is required for the upcoming lowcore relocation changes, where
alternatives for facility 193 need to get patched before lowcore
alternatives.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Co-developed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rework alternatives to allow for callbacks. With this every
alternative entry has additional data encoded:
- When (aka context) an alternative is supposed to be applied
- The type of an alternative, which allows for type specific handling
and callbacks
- Extra type specific payload (patch information), which can be passed
to callbacks in order to decide if an alternative should be applied
or not
With this only the "late" context is implemented, which means there is
no change to the previous behaviour. All code is just converted to the
more generic new infrastructure.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To avoid lots of ifdefs in C code make s390_kernel_write() usable for
the decompressor: simply use memcpy() for this case since there is no
write protection enabled that early.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move all text sync functions from alternative.c to processor.c. This
way there is only minimal code left in alternative.c left, which is a
prerequisite to use the C file within boot code as well.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The two alternative header files must stay in sync. This is easier to
achieve within one header file. Therefore merge both of them and have
only one file, like most other architectures.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The alternative code is using the words facility and feature for the
same. Rename facility to more generic feature everywhere to have
consistent naming.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The current Kernel doesn't boot without alternative patching on
z16 machines. To avoid such bugs in the future, remove the option
disable alternative patching.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
To allow testing flags for offline CPUs, move the CIF flags
to struct pcpu. To avoid having to calculate the array index
for each access, add a pointer to the pcpu member for the current
cpu to lowcore.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of moving the CIF flags from lowcore to pcpu_devices,
convert the pcpu_devices array to use the percpu infrastructure.
This is required because using the pcpu_devices array as it is would
introduce a performance penalty due to the fact that CPU flags for
multiple CPUs would end up in the same cacheline.
Note that a pointer to the pcpu struct of the IPL CPU is still required.
This is because a restart interrupt can be triggered on an offline CPU.
s390 stores the percpu offset in lowcore, but offline CPUs have no
lowcore area allocated. So percpu data cannot be used from an offline
CPU and we need to get the pcpu pointer for the IPL cpu from somewhere
else.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The current smp code allows to trigger a restart interrupt on CPUs
offline in linux. To allow using the percpu infrastructure instead
of the pcpu_devices array, switch to the ipl cpu which is always
online before calling do_restart().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When allocating a random memory range for .amode31 sections
the minimal randomization address is 0. That does not lead
to a possible overlap with the decompressor image (which also
starts from 0) since by that time the image range is already
reserved.
Do not assume the decompressor range is reserved and always
provide the minimal randomization address for .amode31
sections beyond the decompressor. That is a prerequisite
for moving the lowcore memory address from NULL elsewhere.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Event CF_DIAG reads out complete counter sets using stcctm
instruction. This is done at event start time when the process
starts execution and at event stop time when the process is
removed from the CPU. During removal the difference of each
counter in the counter sets is calculated and saved as raw data
in the ring buffer. This works fine unless the number of counters
in a counter set is zero. This may happen for the extended counter
set. This set is machine specific and the size of the counter
set can be zero even when extended counter set is authorized for
read access.
This case is not handled. cfdiag_diffctr() checks authorization
of the extended counter set. If true the functions assumes
the extended counter set has been saved in a data buffer. However
this is not the case, cfdiag_getctrset() does not save a counter
set with counter set size of zero. This mismatch causes an endless
loop in the counter set readout during event stop handling.
The calculation of the difference of the counters in each counter
now verifies the size of the counter set is non-zero. A counter set
with size zero is skipped.
Fixes: a029a4eab3 ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The struct vm_layout contains fields used in __pa/__va calculations. Such
fundamental things have to be exported with EXPORT_SYMBOL to avoid
breakages of out-of-tree modules under non-GPL licenses.
Fixes: 7de0446f0b ("s390/boot: Make identity mapping base address explicit")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On a PCI adapter that provides up to 8 MSI interrupt sources the s390
implementation of PCI interrupts rejected to accommodate them, although
the underlying hardware is able to support that.
For MSI-X it is sufficient to allocate a single irq_desc per msi_desc,
but for MSI multiple irq descriptors are attached to and controlled by
a single msi descriptor. Add the appropriate loops to maintain multiple
irq descriptors and tie/untie them to/from the appropriate AIBV bit, if
a device driver allocates more than 1 MSI interrupt.
Common PCI code passes on requests to allocate a number of interrupt
vectors based on the device drivers' demand and the PCI functions'
capabilities. However, the root-complex of s390 systems support just a
limited number of interrupt vectors per PCI function.
Produce a kernel log message to inform about any architecture-specific
capping that might be done.
With this change, we had a PCI adapter successfully raising
interrupts to its device driver via all 8 sources.
Fixes: a384c8924a ("s390/PCI: Fix single MSI only check")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Factor out adapter interrupt allocation from arch_setup_msi_irqs() in
preparation for enabling registration of multiple MSIs. Code movement
only, no change of functionality intended.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Implement the runtime constant infrastructure for s390, allowing the
dcache d_hash() function to be generated using as a constant for hash
table address followed by shift by a constant of the hash index.
This is the s390 variant of commit 94a2bc0f61 ("arm64: add 'runtime
constant' support") and commit e3c92e8171 ("runtime constants: add
x86 architecture support").
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull MSI interrupt updates from Thomas Gleixner:
"Switch ARM/ARM64 over to the modern per device MSI domains.
This simplifies the handling of platform MSI and wire to MSI
controllers and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices"
* tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/gic-v3-its: Correctly fish out the DID for platform MSI
irqchip/gic-v3-its: Correctly honor the RID remapping
genirq/msi: Move msi_device_data to core
genirq/msi: Remove platform MSI leftovers
irqchip/irq-mvebu-icu: Remove platform MSI leftovers
irqchip/irq-mvebu-sei: Switch to MSI parent
irqchip/mvebu-odmi: Switch to parent MSI
irqchip/mvebu-gicp: Switch to MSI parent
irqchip/irq-mvebu-icu: Prepare for real per device MSI
irqchip/imx-mu-msi: Switch to MSI parent
irqchip/gic-v2m: Switch to device MSI
irqchip/gic_v3_mbi: Switch over to parent domain
genirq/msi: Remove platform_msi_create_device_domain()
irqchip/mbigen: Remove platform_msi_create_device_domain() fallback
irqchip/gic-v3-its: Switch platform MSI to MSI parent
irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI
irqchip/mbigen: Prepare for real per device MSI
irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI
irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]
irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX
...
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
Pull LoongArch updates from Huacai Chen:
- Define __ARCH_WANT_NEW_STAT in unistd.h
- Always enumerate MADT and setup logical-physical CPU mapping
- Add irq_work support via self IPIs
- Add RANDOMIZE_KSTACK_OFFSET support
- Add ARCH_HAS_PTE_DEVMAP support
- Add ARCH_HAS_DEBUG_VM_PGTABLE support
- Add writecombine support for DMW-based ioremap()
- Add architectural preparation for CPUFreq
- Add ACPI standard hardware register based S3 support
- Add support for relocating the kernel with RELR relocation
- Some bug fixes and other small changes
* tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Make the users of larch_insn_gen_break() constant
LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint
LoongArch: Use rustc option -Zdirect-access-external-data
LoongArch: Add support for relocating the kernel with RELR relocation
LoongArch: Remove a redundant checking in relocator
LoongArch: Use correct API to map cmdline in relocate_kernel()
LoongArch: Automatically disable KASLR for hibernation
LoongArch: Add ACPI standard hardware register based S3 support
LoongArch: Add architectural preparation for CPUFreq
LoongArch: Add writecombine support for DMW-based ioremap()
LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support
LoongArch: Add ARCH_HAS_PTE_DEVMAP support
LoongArch: Add RANDOMIZE_KSTACK_OFFSET support
LoongArch: Add irq_work support via self IPIs
LoongArch: Always enumerate MADT and setup logical-physical CPU mapping
LoongArch: Define __ARCH_WANT_NEW_STAT in unistd.h
Pull thermal control fix from Rafael Wysocki:
"Fix a flood of kernel messages coming from the thermal core on systems
where iwlwifi is loaded, but the network interfaces controlled by it
are down (Rafael Wysocki)"
* tag 'thermal-6.11-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Allow thermal zones to tell the core to ignore them
Pull io_uring fixes from Jens Axboe:
"Two minor fixes in here, both heading to stable. In detail:
- Fix error where forced async uring_cmd getsockopt returns the wrong
value on execution, leading to it never being completed (Pavel)
- Fix io_alloc_pbuf_ring() using a NULL check rather than IS_ERR
(Pavel)"
* tag 'io_uring-6.11-20240722' of git://git.kernel.dk/linux:
io_uring: fix error pbuf checking
io_uring: fix lost getsockopt completions
Pull more block updates from Jens Axboe:
- MD fixes via Song:
- md-cluster fixes (Heming Zhao)
- raid1 fix (Mateusz Jończyk)
- s390/dasd module description (Jeff)
- Series cleaning up and hardening the blk-mq debugfs flag handling
(John, Christoph)
- blk-cgroup cleanup (Xiu)
- Error polled IO attempts if backend doesn't support it (hexue)
- Fix for an sbitmap hang (Yang)
* tag 'for-6.11/block-20240722' of git://git.kernel.dk/linux: (23 commits)
blk-cgroup: move congestion_count to struct blkcg
sbitmap: fix io hung due to race on sbitmap_word::cleared
block: avoid polling configuration errors
block: Catch possible entries missing from rqf_name[]
block: Simplify definition of RQF_NAME()
block: Use enum to define RQF_x bit indexes
block: Catch possible entries missing from cmd_flag_name[]
block: Catch possible entries missing from alloc_policy_name[]
block: Catch possible entries missing from hctx_flag_name[]
block: Catch possible entries missing from hctx_state_name[]
block: Catch possible entries missing from blk_queue_flag_name[]
block: Make QUEUE_FLAG_x as an enum
block: Relocate BLK_MQ_MAX_DEPTH
block: Relocate BLK_MQ_CPU_WORK_BATCH
block: remove QUEUE_FLAG_STOPPED
block: Add missing entry to hctx_flag_name[]
block: Add zone write plugging entry to rqf_name[]
block: Add missing entries from cmd_flag_name[]
s390/dasd: fix error checks in dasd_copy_pair_store()
s390/dasd: add missing MODULE_DESCRIPTION() macros
...
Pull block integrity mapping updates from Jens Axboe:
"A set of cleanups and fixes for the block integrity support.
Sent separately from the main block changes from last week, as they
depended on later fixes in the 6.10-rc cycle"
* tag 'for-6.11/block-post-20240722' of git://git.kernel.dk/linux:
block: don't free the integrity payload in bio_integrity_unmap_free_user
block: don't free submitter owned integrity payload on I/O completion
block: call bio_integrity_unmap_free_user from blk_rq_unmap_user
block: don't call bio_uninit from bio_endio
block: also return bio_integrity_payload * from stubs
block: split integrity support out of bio.h
Pull bcachefs fixes from Kent Overstreet:
- another fix for fsck getting stuck, from marcin
- small syzbot fix
- another undefined shift fix
* tag 'bcachefs-2024-07-22' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix printbuf usage while atomic
bcachefs: More informative error message in reattach_inode()
bcachefs: kill btree_trans_too_many_iters() in bch2_bucket_alloc_freelist()
bcachefs: mean_and_variance: Avoid too-large shift amounts
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- simple fileattr support
Fixes:
- transform resident to nonresident for compressed files
- the format of the "nocase" mount option
- getting file type
- many other internal bugs
Refactoring:
- remove unused functions and macros
- partial transition from page to folio (suggested by Matthew Wilcox)
- legacy ntfs support"
* tag 'ntfs3_for_6.11' of https://github.com/Paragon-Software-Group/linux-ntfs3: (42 commits)
fs/ntfs3: Fix formatting, change comments, renaming
fs/ntfs3: Update log->page_{mask,bits} if log->page_size changed
fs/ntfs3: Implement simple fileattr
fs/ntfs3: Redesign legacy ntfs support
fs/ntfs3: Use function file_inode to get inode from file
fs/ntfs3: Minor ntfs_list_ea refactoring
fs/ntfs3: Check more cases when directory is corrupted
fs/ntfs3: Do copy_to_user out of run_lock
fs/ntfs3: Keep runs for $MFT::$ATTR_DATA and $MFT::$ATTR_BITMAP
fs/ntfs3: Missed error return
fs/ntfs3: Fix the format of the "nocase" mount option
fs/ntfs3: Fix field-spanning write in INDEX_HDR
ntfs3: Convert attr_wof_frame_info() to use a folio
ntfs3: Convert ni_readpage_cmpr() to take a folio
ntfs3: Convert ntfs_get_frame_pages() to use a folio
ntfs3: Remove calls to set/clear the error flag
ntfs3: Convert attr_make_nonresident to use a folio
ntfs3: Convert attr_data_write_resident to use a folio
ntfs3: Convert ntfs_write_end() to work on a folio
ntfs3: Convert attr_data_read_resident() to take a folio
...
Pull smb server fixes from Steve French:
- two durable handle improvements
- two small cleanup patches
* tag '6.11-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: add durable scavenger timer
ksmbd: avoid reclaiming expired durable opens by the client
ksmbd: Constify struct ksmbd_transport_ops
ksmbd: remove duplicate SMB2 Oplock levels definitions
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add missing MODULE_DESCRIPTION() macro
- fix offset addition for alarms
Drivers:
- isl1208: alarm clearing fixes
- mcp794xx: oscillator failure detection
- stm32: stm32mp25 support
- tps6594: power management support"
* tag 'rtc-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: stm32: add new st,stm32mp25-rtc compatible and check RIF configuration
dt-bindings: rtc: stm32: introduce new st,stm32mp25-rtc compatible
rtc: Drop explicit initialization of struct i2c_device_id::driver_data to 0
rtc: interface: Add RTC offset to alarm after fix-up
rtc: ds1307: Clamp year to valid BCD (0-99) in `set_time()`
rtc: ds1307: Detect oscillator fail on mcp794xx
rtc: isl1208: Update correct procedure for clearing alarm
rtc: isl1208: Add a delay for clearing alarm
dt-bindings: rtc: Convert rtc-fsl-ftm-alarm.txt to yaml format
rtc: add missing MODULE_DESCRIPTION() macro
rtc: abx80x: Fix return value of nvmem callback on read
rtc: cmos: Fix return value of nvmem callbacks
rtc: isl1208: Fix return value of nvmem callbacks
rtc: tps6594: Add power management support
rtc: tps6594: introduce private structure as drvdata
rtc: tps6594: Fix memleak in probe
Pull smb client fixes from Steve French:
"Six smb3 client fixes, most for stable including important netfs fixes:
- various netfs related fixes for cifs addressing some regressions in
6.10 (e.g. generic/708 and some multichannel crediting related
issues)
- fix for a noisy log message on copy_file_range
- add trace point for read/write credits"
* tag '6.11-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing fscache invalidation
cifs: Add a tracepoint to track credits involved in R/W requests
cifs: Fix setting of zero_point after DIO write
cifs: Fix missing error code set
cifs: Fix server re-repick on subrequest retry
cifs: fix noisy message on copy_file_range
Pull pin control updates from Linus Walleij:
"Some new drivers is the main part, the rest is cleanups and nonurgent
fixes.
Nothing much special about this, no core changes this time.
New drivers:
- Renesas RZ/V2H(P) SoC
- NXP Freescale i.MX91 SoC
- Nuvoton MA35D1 SoC
- Qualcomm PMC8380, SM4250, SM4250 LPI
Enhancements:
- A slew of scoped-based simplifications of of_node_put()"
* tag 'pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions
pinctrl: renesas: rzg2l: Clarify OEN read/write support
dt-bindings: pinctrl: pinctrl-single: Fix pinctrl-single,gpio-range description
dt-bindings: pinctrl: npcm8xx: add missing pin group and mux function
dt-bindings: pinctrl: pinctrl-single: fix schmitt related properties
pinctrl: freescale: Use scope based of_node_put() cleanups
pinctrl: equilibrium: Use scope based of_node_put() cleanups
pinctrl: ti: iodelay: Use scope based of_node_put() cleanups
pinctrl: qcom: lpass-lpi: increase MAX_NR_GPIO to 32
pinctrl: cy8c95x0: Update cache modification
pinctrl: cy8c95x0: Use cleanup.h
pinctrl: renesas: r8a779h0: Remove unneeded separators
pinctrl: renesas: r8a779g0: Add INTC-EX pins, groups, and function
pinctrl: renesas: r8a779g0: Remove unneeded separators
pinctrl: renesas: r8a779h0: Add AVB MII pins and groups
pinctrl: renesas: r8a779g0: Fix TPU suffixes
pinctrl: renesas: r8a779g0: Fix TCLK suffixes
pinctrl: renesas: r8a779g0: FIX PWM suffixes
pinctrl: renesas: r8a779g0: Fix IRQ suffixes
...
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267c ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
Pull MTD updates from Miquel Raynal:
"Nothing stands out for this merge window, mostly minor fixes, such as
module descriptions, the use of debug macros and Makefile
improvements.
Raw NAND changes;
- The Freescale MXC driver has been converted to the newer
'->exec_op()' interface
- The meson driver now supports handling the boot ROM area with very
specific ECC needs
- Support for the iMX8QXP has been added to the GPMI driver
- The lpx32xx driver now can get the DMA channels using DT entries
- The Qcom binding has been improved to be more future proof by Rob
- And then there is the usual load of misc and minor changes
SPI-NAND changes:
- The Macronix vendor driver has been improved to support an extended
ID to avoid conflicting with older devices after an ID reuse issue
SPI NOR changes:
- Drop support for Xilinx S3AN flashes. These flashes are for the
very old Xilinx Spartan 3 FPGAs and they need some awkward code in
the core to support.
Drop support for these flashes, along with the special handling we
needed for them in the core like non-power-of-2 page size handling
and the .setup() callback.
- Fix regression for old w25q128 flashes without SFDP tables.
Commit 83e824a4a5 ("mtd: spi-nor: Correct flags for Winbond
w25q128") dropped support for such devices under the assumption
that they aren't being used anymore. Users have now surfaced [0] so
fix the regression by supporting both kind of devices.
- Core cleanups including removal of SPI_NOR_NO_FR flag and
simplification of spi_nor_get_flash_info()"
Link: https://lore.kernel.org/r/CALxbwRo_-9CaJmt7r7ELgu+vOcgk=xZcGHobnKf=oT2=u4d4aA@mail.gmail.com/ [0]
* tag 'mtd/for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (28 commits)
mtd: rawnand: lpx32xx: Fix dma_request_chan() error checks
mtd: spinand: macronix: Add support for serial NAND flash
mtd: spinand: macronix: Add support for reading Device ID 2
mtd: rawnand: lpx32xx: Request DMA channels using DT entries
dt-bindings: mtd: qcom,nandc: Define properties at top-level
mtd: rawnand: intel: use 'time_left' variable with wait_for_completion_timeout()
mtd: rawnand: mxc: use 'time_left' variable with wait_for_completion_timeout()
mtd: rawnand: gpmi: add iMX8QXP support.
mtd: rawnand: gpmi: add 'support_edo_timing' in gpmi_devdata
mtd: cmdlinepart: Replace `dbg()` macro with `pr_debug()`
mtd: add missing MODULE_DESCRIPTION() macros
mtd: make mtd_test.c a separate module
dt-bindings: mtd: gpmi-nand: Add 'fsl,imx8qxp-gpmi-nand' compatible string
mtd: rawnand: cadence: remove unused struct 'ecc_info'
mtd: rawnand: mxc: support software ECC
mtd: rawnand: mxc: implement exec_op
mtd: rawnand: mxc: separate page read from ecc calc
mtd: spi-nor: winbond: fix w25q128 regression
mtd: spi-nor: simplify spi_nor_get_flash_info()
mtd: spi-nor: get rid of SPI_NOR_NO_FR
...
Pull landlock updates from Mickaël Salaün:
"This simplifies code and improves documentation"
* tag 'landlock-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Various documentation improvements
landlock: Clarify documentation for struct landlock_ruleset_attr
landlock: Use bit-fields for storing handled layer access masks
Pull firewire updates from Takashi Sakamoto:
"There are many lines of changes for FireWire subsystem, but there is
practically no functional change.
Most of the changes are for code refactoring, some KUnit tests to
added helper functions, and new tracepoints events for both the core
functions and 1394 OHCI driver.
The tracepoints events now cover the verbose logging enabled by debug
parameter of firewire-ohci kernel module. The parameter would be
removed in any future timing, thus it is now deprecated"
* tag 'firewire-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (32 commits)
firewire: core: move copy_port_status() helper function to TP_fast_assign() block
Revert "firewire: ohci: use common macro to interpret be32 data in le32 buffer"
firewire: ohci: add tracepoints event for data of Self-ID DMA
firewire: ohci: use inline functions to operate data of self-ID DMA
firewire: ohci: add static inline functions to deserialize for Self-ID DMA operation
firewire: ohci: use static function to handle endian issue on PowerPC platform
firewire: ohci: use common macro to interpret be32 data in le32 buffer
firewire: core: Fix spelling mistakes in tracepoint messages
firewire: ohci: add tracepoints event for hardIRQ event
firewire: ohci: add support for Linux kernel tracepoints
firewire: core: add tracepoints events for completions of packets in isochronous context
firewire: core: add tracepoints events for queueing packets of isochronous context
firewire: core: add tracepoints events for flushing completions of isochronous context
firewire: core: add tracepoints events for flushing of isochronous context
firewire: core: add tracepoints events for starting/stopping of isochronous context
firewire: core: add tracepoints events for setting channels of multichannel context
firewire: core: add tracepoints events for allocation/deallocation of isochronous context
firewire: core: undefine macros after use in tracepoints events
firewire: core: record card index in tracepoints event for self ID sequence
firewire: core: use inline helper functions to serialize phy config packet
...
Pull libnvdimm updates from Ira Weiny:
- One small cleanup to use sizeof(*pointer)
- Add MODULE_DESCRIPTIONS() to eliminate make W=1 warnings
* tag 'libnvdimm-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
testing: nvdimm: Add MODULE_DESCRIPTION() macros
testing: nvdimm: iomap: add MODULE_DESCRIPTION()
dax: add missing MODULE_DESCRIPTION() macros
nvdimm: add missing MODULE_DESCRIPTION() macros
ACPI: NFIT: add missing MODULE_DESCRIPTION() macro
nvdimm/btt: use sizeof(*pointer) instead of sizeof(type)
There is a report that iowq executed getsockopt never completes. The
reason being that io_uring_cmd_sock() can return a positive result, and
io_uring_cmd() propagates it back to core io_uring, instead of IOU_OK.
In case of io_wq_submit_work(), the request will be dropped without
completing it.
The offending code was introduced by a hack in
a9c3eda7ea ("io_uring: fix submission-failure handling for uring-cmd"),
however it was fine until getsockopt was introduced and started
returning positive results.
The right solution is to always return IOU_OK, since
e0b23d9953 ("io_uring: optimise ltimeout for inline execution"),
we should be able to do it without problems, however for the sake of
backporting and minimising side effects, let's keep returning negative
return codes and otherwise do IOU_OK.
Link: https://github.com/axboe/liburing/issues/1181
Cc: stable@vger.kernel.org
Fixes: 8e9fad0e70 ("io_uring: Add io_uring command support for sockets")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/ff349cf0654018189b6077e85feed935f0f8839e.1721149870.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
