This file already uses sysfs_emit(). So be consistent and also use
sysfs_emit_at().
This slightly simplifies the code and makes it more readable.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
atomic write can only be used via buffered IO, let's fail direct IO on
atomic_file and return -EOPNOTSUPP.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_do_write_data_page, when the data block is NULL_ADDR, it skips
writepage considering that it has been already truncated.
This results in an infinite loop as the PAGECACHE_TAG_TOWRITE tag is not
cleared during the writeback process for a compressed file including
NULL_ADDR in compress_mode=user.
This is the reproduction process:
1. dd if=/dev/zero bs=4096 count=1024 seek=1024 of=testfile
2. f2fs_io compress testfile
3. dd if=/dev/zero bs=4096 count=1 conv=notrunc of=testfile
4. f2fs_io decompress testfile
To prevent the problem, let's check whether the cluster is fully
allocated before redirty its pages.
Fixes: 5fdb322ff2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE")
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com>
Tested-by: Jaewook Kim <jw5454.kim@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As the helper function f2fs_bdev_support_discard() shows, f2fs checks if
the target block devices support discard by calling
bdev_max_discard_sectors() and bdev_is_zoned(). This check works well
for most cases, but it does not work for conventional zones on zoned
block devices. F2fs assumes that zoned block devices support discard,
and calls __submit_discard_cmd(). When __submit_discard_cmd() is called
for sequential write required zones, it works fine since
__submit_discard_cmd() issues zone reset commands instead of discard
commands. However, when __submit_discard_cmd() is called for
conventional zones, __blkdev_issue_discard() is called even when the
devices do not support discard.
The inappropriate __blkdev_issue_discard() call was not a problem before
the commit 30f1e72414 ("block: move discard checks into the ioctl
handler") because __blkdev_issue_discard() checked if the target devices
support discard or not. If not, it returned EOPNOTSUPP. After the
commit, __blkdev_issue_discard() no longer checks it. It always returns
zero and sets NULL to the given bio pointer. This NULL pointer triggers
f2fs_bug_on() in __submit_discard_cmd(). The BUG is recreated with the
commands below at the umount step, where /dev/nullb0 is a zoned null_blk
with 5GB total size, 128MB zone size and 10 conventional zones.
$ mkfs.f2fs -f -m /dev/nullb0
$ mount /dev/nullb0 /mnt
$ for ((i=0;i<5;i++)); do dd if=/dev/zero of=/mnt/test bs=65536 count=1600 conv=fsync; done
$ umount /mnt
To fix the BUG, avoid the inappropriate __blkdev_issue_discard() call.
When discard is requested for conventional zones, check if the device
supports discard or not. If not, return EOPNOTSUPP.
Fixes: 30f1e72414 ("block: move discard checks into the ioctl handler")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Soft IRQ Thread
- f2fs_write_end_io
- f2fs_defragment_range
- set_page_private_gcing
- type = WB_DATA_TYPE(page, false);
: assign type w/ F2FS_WB_CP_DATA
due to page_private_gcing() is true
- dec_page_count() w/ wrong type
- end_page_writeback()
Value of F2FS_WB_CP_DATA reference count may become negative under above
race condition, the root cause is we missed to wait page writeback before
setting gcing page private flag, let's fix it.
Fixes: 2d1fe8a86b ("f2fs: fix to tag gcing flag on page during file defragment")
Fixes: 4961acdd65 ("f2fs: fix to tag gcing flag on page during block migration")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The i_pino in f2fs_inode_info has the previous parent's i_ino when inode
was renamed, which may cause f2fs_ioc_start_atomic_write to fail.
If file_wrong_pino is true and i_nlink is 1, then to find a valid pino,
we should refer to the dentry from inode.
To resolve this issue, let's get parent inode using parent dentry
directly.
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The F2FS ioctls for starting and committing atomic writes check for
inode_owner_or_capable(), but this does not give LSMs like SELinux or
Landlock an opportunity to deny the write access - if the caller's FSUID
matches the inode's UID, inode_owner_or_capable() immediately returns true.
There are scenarios where LSMs want to deny a process the ability to write
particular files, even files that the FSUID of the process owns; but this
can currently partially be bypassed using atomic write ioctls in two ways:
- F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can
truncate an inode to size 0
- F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert
changes another process concurrently made to a file
Fix it by requiring FMODE_WRITE for these operations, just like for
F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these
ioctls when intending to write into the file, that seems unlikely to break
anything.
Fixes: 88b88a6679 ("f2fs: support atomic writes")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We just need inode page when write inline data, use
f2fs_get_node_page() to get it instead of using dnode_of_data,
which can eliminate unnecessary struct use.
Signed-off-by: Zijie Wang <wangzijie1@honor.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we add "atgc" to the fstab table, ATGC is not immediately enabled.
There is a 7-day time threshold, and we can use "atgc_enabled" to
show whether ATGC is enabled.
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit c550e25bca.
Commit c550e25bca ("f2fs: use flush
command instead of FUA for zoned device") used additional flush
command to keep write order.
Since Commit dd291d77cc ("block:
Introduce zone write plugging") has enabled the block layer to
handle this order issue, there is no need to use flush command.
Signed-off-by: Wenjie Cheng <cwjhust@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If lfs mode is on, buffered read may race w/ OPU dio write as below,
it may cause buffered read hits unwritten data unexpectly, and for
dio read, the race condition exists as well.
Thread A Thread B
- f2fs_file_write_iter
- f2fs_dio_write_iter
- __iomap_dio_rw
- f2fs_iomap_begin
- f2fs_map_blocks
- __allocate_data_block
- allocated blkaddr #x
- iomap_dio_submit_bio
- f2fs_file_read_iter
- filemap_read
- f2fs_read_data_folio
- f2fs_mpage_readpages
- f2fs_map_blocks
: get blkaddr #x
- f2fs_submit_read_bio
IRQ
- f2fs_read_end_io
: read IO on blkaddr #x complete
IRQ
- iomap_dio_bio_end_io
: direct write IO on blkaddr #x complete
In LFS mode, if there is inflight dio, let's wait for its completion,
this policy won't cover all race cases, however it is a tradeoff which
avoids abusing lock around IO paths.
Fixes: f847c699cf ("f2fs: allow out-place-update for direct IO in LFS mode")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It should wait all existing dio write IOs before block removal,
otherwise, previous direct write IO may overwrite data in the
block which may be reused by other inode.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We may trigger high frequent checkpoint for below case:
1. mkdir /mnt/dir1; set dir1 encrypted
2. touch /mnt/file1; fsync /mnt/file1
3. mkdir /mnt/dir2; set dir2 encrypted
4. touch /mnt/file2; fsync /mnt/file2
...
Although, newly created dir and file are not related, due to
commit bbf156f7af ("f2fs: fix lost xattrs of directories"), we will
trigger checkpoint whenever fsync() comes after a new encrypted dir
created.
In order to avoid such performance regression issue, let's record an
entry including directory's ino in global cache whenever we update
directory's xattr data, and then triggerring checkpoint() only if
xattr metadata of target file's parent was updated.
This patch updates to cover below no encryption case as well:
1) parent is checkpointed
2) set_xattr(dir) w/ new xnid
3) create(file)
4) fsync(file)
Fixes: bbf156f7af ("f2fs: fix lost xattrs of directories")
Reported-by: wangzijie <wangzijie1@honor.com>
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reported-by: Yunlei He <heyunlei@hihonor.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Case #1:
SQLite App GC Thread Kworker Shrinker
- f2fs_ioc_start_atomic_write
- f2fs_ioc_commit_atomic_write
- f2fs_commit_atomic_write
- filemap_write_and_wait_range
: write atomic_file's data to cow_inode
echo 3 > drop_caches
to drop atomic_file's
cache.
- f2fs_gc
- gc_data_segment
- move_data_page
- set_page_dirty
- writepages
- f2fs_do_write_data_page
: overwrite atomic_file's data
to cow_inode
- f2fs_down_write(&fi->i_gc_rwsem[WRITE])
- __f2fs_commit_atomic_write
- f2fs_up_write(&fi->i_gc_rwsem[WRITE])
Case #2:
SQLite App GC Thread Kworker
- f2fs_ioc_start_atomic_write
- __writeback_single_inode
- do_writepages
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
: write atomic_file's data to cow_inode
- f2fs_gc
- gc_data_segment
- move_data_page
- set_page_dirty
- writepages
- f2fs_do_write_data_page
: overwrite atomic_file's data to cow_inode
- f2fs_ioc_commit_atomic_write
In above cases racing in between atomic_write and GC, previous
data in atomic_file may be overwrited to cow_file, result in
data corruption.
This patch introduces PAGE_PRIVATE_ATOMIC_WRITE bit flag in page.private,
and use it to indicate that there is last dirty data in atomic file,
and the data should be writebacked into cow_file, if the flag is not
tagged in page, we should never write data across files.
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The macro stat_inc_cp_count accepts a parameter si,
but it was not used, rather the variable sbi was directly used,
which may be a local variable inside a function that calls the macros.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The macro on_f2fs_build_free_nids accepts a parameter nmi,
but it was not used, rather the variable nm_i was directly used,
which may be a local variable inside a function that calls the macros.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, we are using a mix of traditional UFS and zone UFS to support
some functionalities that cannot be achieved on zone UFS alone. However,
there are some issues with this approach. There exists a significant
performance difference between traditional UFS and zone UFS. Under normal
usage, we prioritize writes to zone UFS. However, in critical conditions
(such as when the entire UFS is almost full), we cannot determine whether
data will be written to traditional UFS or zone UFS. This can lead to
significant performance fluctuations, which is not conducive to
development and testing. To address this, we have added an option
zlu_io_enable under sys with the following three modes:
1) zlu_io_enable == 0:Normal mode, prioritize writing to zone UFS;
2) zlu_io_enable == 1:Zone UFS only mode, only allow writing to zone UFS;
3) zlu_io_enable == 2:Traditional UFS priority mode, prioritize writing to
traditional UFS.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
While calculating the end addresses of main area and segment 0, u32
may be not enough to hold the result without the danger of int
overflow.
Just in case, play it safe and cast one of the operands to a
wider type (u64).
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: fd694733d5 ("f2fs: cover large section in sanity check of super")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When dealing with large extents and calculating file offsets by
summing up according extent offsets and lengths of unsigned int type,
one may encounter possible integer overflow if the values are
big enough.
Prevent this from happening by expanding one of the addends to
(pgoff_t) type.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: d323d005ac ("f2fs: support file defragment")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The result of multiplication between values derived from functions
dir_buckets() and bucket_blocks() *could* technically reach
2^30 * 2^2 = 2^32.
While unlikely to happen, it is prudent to ensure that it will not
lead to integer overflow. Thus, use mul_u32_u32() as it's more
appropriate to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3843154598 ("f2fs: introduce large directory support")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introudce a new help get_dnode_base() to wrap common code from
get_dnode_addr() and data_blkaddr() for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull slab fix from Vlastimil Babka:
"Since v6.8 we've had a subtle breakage in SLUB with KFENCE enabled,
that can cause a crash. It hasn't been found earlier due to quite
specific conditions necessary (OOM during kmem_cache_alloc_bulk())"
* tag 'slab-fixes-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slub: do not call do_slab_free for kfence object
The kernel sleep profile is no longer working due to a recursive locking
bug introduced by commit 42a20f86dc ("sched: Add wrapper for get_wchan()
to keep task blocked")
Booting with the 'profile=sleep' kernel command line option added or
executing
# echo -n sleep > /sys/kernel/profiling
after boot causes the system to lock up.
Lockdep reports
kthreadd/3 is trying to acquire lock:
ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: get_wchan+0x32/0x70
but task is already holding lock:
ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: try_to_wake_up+0x53/0x370
with the call trace being
lock_acquire+0xc8/0x2f0
get_wchan+0x32/0x70
__update_stats_enqueue_sleeper+0x151/0x430
enqueue_entity+0x4b0/0x520
enqueue_task_fair+0x92/0x6b0
ttwu_do_activate+0x73/0x140
try_to_wake_up+0x213/0x370
swake_up_locked+0x20/0x50
complete+0x2f/0x40
kthread+0xfb/0x180
However, since nobody noticed this regression for more than two years,
let's remove 'profile=sleep' support based on the assumption that nobody
needs this functionality.
Fixes: 42a20f86dc ("sched: Add wrapper for get_wchan() to keep task blocked")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 fixes from Thomas Gleixner:
- Prevent a deadlock on cpu_hotplug_lock in the aperf/mperf driver.
A recent change in the ACPI code which consolidated code pathes moved
the invocation of init_freq_invariance_cppc() to be moved to a CPU
hotplug handler. The first invocation on AMD CPUs ends up enabling a
static branch which dead locks because the static branch enable tries
to acquire cpu_hotplug_lock but that lock is already held write by
the hotplug machinery.
Use static_branch_enable_cpuslocked() instead and take the hotplug
lock read for the Intel code path which is invoked from the
architecture code outside of the CPU hotplug operations.
- Fix the number of reserved bits in the sev_config structure bit field
so that the bitfield does not exceed 64 bit.
- Add missing Zen5 model numbers
- Fix the alignment assumptions of pti_clone_pgtable() and
clone_entry_text() on 32-bit:
The code assumes PMD aligned code sections, but on 32-bit the kernel
entry text is not PMD aligned. So depending on the code size and
location, which is configuration and compiler dependent, entry text
can cross a PMD boundary. As the start is not PMD aligned adding PMD
size to the start address is larger than the end address which
results in partially mapped entry code for user space. That causes
endless recursion on the first entry from userspace (usually #PF).
Cure this by aligning the start address in the addition so it ends up
at the next PMD start address.
clone_entry_text() enforces PMD mapping, but on 32-bit the tail might
eventually be PTE mapped, which causes a map fail because the PMD for
the tail is not a large page mapping. Use PTI_LEVEL_KERNEL_IMAGE for
the clone() invocation which resolves to PTE on 32-bit and PMD on
64-bit.
- Zero the 8-byte case for get_user() on range check failure on 32-bit
The recend consolidation of the 8-byte get_user() case broke the
zeroing in the failure case again. Establish it by clearing ECX
before the range check and not afterwards as that obvioulsy can't be
reached when the range check fails
* tag 'x86-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uaccess: Zero the 8-byte get_range case on failure on 32-bit
x86/mm: Fix pti_clone_entry_text() for i386
x86/mm: Fix pti_clone_pgtable() alignment assumption
x86/setup: Parse the builtin command line before merging
x86/CPU/AMD: Add models 0x60-0x6f to the Zen5 range
x86/sev: Fix __reserved field in sev_config
x86/aperfmperf: Fix deadlock on cpu_hotplug_lock
Pull timer fixes from Thomas Gleixner:
"Two fixes for the timer/clocksource code:
- The recent fix to make the take over of the broadcast timer more
reliable retrieves a per CPU pointer in preemptible context.
This went unnoticed in testing as some compilers hoist the access
into the non-preemotible section where the pointer is actually
used, but obviously compilers can rightfully invoke it where the
code put it.
Move it into the non-preemptible section right to the actual usage
side to cure it.
- The clocksource watchdog is supposed to emit a warning when the
retry count is greater than one and the number of retries reaches
the limit.
The condition is backwards and warns always when the count is
greater than one. Fixup the condition to prevent spamming dmesg"
* tag 'timers-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()
tick/broadcast: Move per CPU pointer access into the atomic section
Pull scheduler fixes from Thomas Gleixner:
- When stime is larger than rtime due to accounting imprecision, then
utime = rtime - stime becomes negative. As this is unsigned math, the
result becomes a huge positive number.
Cure it by resetting stime to rtime in that case, so utime becomes 0.
- Restore consistent state when sched_cpu_deactivate() fails.
When offlining a CPU fails in sched_cpu_deactivate() after the SMT
present counter has been decremented, then the function aborts but
fails to increment the SMT present counter and leaves it imbalanced.
Consecutive operations cause it to underflow. Add the missing fixup
for the error path.
For SMT accounting the runqueue needs to marked online again in the
error exit path to restore consistent state.
* tag 'sched-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix unbalance set_rq_online/offline() in sched_cpu_deactivate()
sched/core: Introduce sched_set_rq_on/offline() helper
sched/smt: Fix unbalance sched_smt_present dec/inc
sched/smt: Introduce sched_smt_present_inc/dec() helper
sched/cputime: Fix mul_u64_u64_div_u64() precision for cputime
Pull x86 perf fixes from Thomas Gleixner:
- Move the smp_processor_id() invocation back into the non-preemtible
region, so that the result is valid to use
- Add the missing package C2 residency counters for Sierra Forest CPUs
to make the newly added support actually useful
* tag 'perf-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix smp_processor_id()-in-preemptible warnings
perf/x86/intel/cstate: Add pkg C2 residency counter for Sierra Forest
Pull irq fixes from Thomas Gleixner:
"A couple of fixes for interrupt chip drivers:
- Make sure to skip the clear register space in the MBIGEN driver
when calculating the node register index. Otherwise the clear
register is clobbered and the wrong node registers are accessed.
- Fix a signed/unsigned confusion in the loongarch CPU driver which
converts an error code to a huge "valid" interrupt number.
- Convert the mesion GPIO interrupt controller lock to a raw spinlock
so it works on RT.
- Add a missing static to a internal function in the pic32 EVIC
driver"
* tag 'irq-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mbigen: Fix mbigen node address layout
irqchip/meson-gpio: Convert meson_gpio_irq_controller::lock to 'raw_spinlock_t'
irqchip/irq-pic32-evic: Add missing 'static' to internal function
irqchip/loongarch-cpu: Fix return value of lpic_gsi_to_irq()
Pull locking fixes from Thomas Gleixner:
"Two fixes for locking and jump labels:
- Ensure that the atomic_cmpxchg() conditions are correct and
evaluating to true on any non-zero value except 1. The missing
check of the return value leads to inconsisted state of the jump
label counter.
- Add a missing type conversion in the paravirt spinlock code which
makes loongson build again"
* tag 'locking-urgent-2024-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Fix the fix, brown paper bags galore
locking/pvqspinlock: Correct the type of "old" variable in pv_kick_node()
Commit 04f08ef291 ("arm/arm64: dts: arm: Use generic clock and
regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes
(at different paths).
The kernel can't handle these duplicate names even though they are at
different paths. Fix this by renaming one of the nodes to "clock-pclk".
This name is aligned with other Arm boards (those didn't have a known
frequency to use in the node name).
Fixes: 04f08ef291 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull smb client fixes from Steve French:
- two reparse point fixes
- minor cleanup
- additional trace point (to help debug a recent problem)
* tag '6.11-rc1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
smb: client: fix FSCTL_GET_REPARSE_POINT against NetApp
smb3: add dynamic tracepoints for shutdown ioctl
cifs: Remove cifs_aio_ctx
smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
Pull media fixes from Mauro Carvalho Chehab:
- two Kconfig fixes
- one fix for the UVC driver addressing probing time detection of a UVC
custom controls
- one fix related to PDF generation
* tag 'media/v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: v4l: Fix missing tabular column hint for Y14P format
media: intel/ipu6: select AUXILIARY_BUS in Kconfig
media: ipu-bridge: fix ipu6 Kconfig dependencies
media: uvcvideo: Fix custom control mapping probing
Pull SCSI fixes from James Bottomley:
"One core change that reverts the double message print patch in sd.c
(it was causing regressions on embedded systems).
The rest are driver fixes in ufs, mpt3sas and mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: exynos: Don't resume FMP when crypto support is disabled
scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONES
scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONES
scsi: ufs: core: Do not set link to OFF state while waking up from hibernation
scsi: Revert "scsi: sd: Do not repeat the starting disk message"
scsi: ufs: core: Fix deadlock during RTC update
scsi: ufs: core: Bypass quick recovery if force reset is needed
scsi: ufs: core: Check LSDBS cap when !mcq
Pull xfs fixes from Chandan Babu:
- Fix memory leak when corruption is detected during scrubbing parent
pointers
- Allow SECURE namespace xattrs to use reserved block pool to in order
to prevent ENOSPC
- Save stack space by passing tracepoint's char array to file_path()
instead of another stack variable
- Remove unused parameter in macro XFS_DQUOT_LOGRES
- Replace comma with semicolon in a couple of places
* tag 'xfs-6.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: convert comma to semicolon
xfs: convert comma to semicolon
xfs: remove unused parameter in macro XFS_DQUOT_LOGRES
xfs: fix file_path handling in tracepoints
xfs: allow SECURE namespace xattrs to use reserved block pool
xfs: fix a memory leak
Pull parisc architecture fixes from Helge Deller:
- fix unaligned memory accesses when calling BPF functions
- adjust memory size constants to fix possible DMA corruptions
* tag 'parisc-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix a possible DMA corruption
parisc: fix unaligned accesses in BPF
The runtime constants linker script depended on documented linker
behavior [1]:
"If an output section’s name is the same as the input section’s name
and is representable as a C identifier, then the linker will
automatically PROVIDE two symbols: __start_SECNAME and __stop_SECNAME,
where SECNAME is the name of the section. These indicate the start
address and end address of the output section respectively"
to just automatically define the symbol names for the bounds of the
runtime constant arrays.
It turns out that this isn't actually something we can rely on, with old
linkers not generating these automatic symbols. It looks to have been
introduced in binutils-2.29 back in 2017, and we still support building
with versions all the way back to binutils-2.25 (from 2015).
And yes, Oleg actually seems to be using such ancient versions of
binutils.
So instead of depending on the implicit symbols from "section names
match and are representable C identifiers", just do this all manually.
It's not like it causes us any extra pain, we already have to do that
for all the other sections that we use that often have special
characters in them.
Reported-and-tested-by: Oleg Nesterov <oleg@redhat.com>
Link: https://sourceware.org/binutils/docs/ld/Input-Section-Example.html [1]
Link: https://lore.kernel.org/all/20240802114518.GA20924@redhat.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull io_uring fixes from Jens Axboe:
"Two minor tweaks for the NAPI handling, both from Olivier:
- Kill two unused list definitions
- Ensure that multishot NAPI doesn't age away"
* tag 'io_uring-6.11-20240802' of git://git.kernel.dk/linux:
io_uring: remove unused local list heads in NAPI functions
io_uring: keep multishot request NAPI timeout current
Pull thermal control fixes from Rafael Wysocki:
"These fix a few issues related to the MSI IRQs management in the
int340x thermal driver, fix a thermal core issue that may lead to
missing trip point crossing events and update the thermal core
documentation.
Specifics:
- Fix MSI error path cleanup in int340x, allow it to work with a
subset of thermal MSI IRQs if some of them are not working and make
it free all MSI IRQs on module exit (Srinivas Pandruvada)
- Fix a thermal core issue that may lead to missing trip point
crossing events in some cases when thermal_zone_set_trips() is used
and update the thermal core documentation (Rafael Wysocki)"
* tag 'thermal-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Update thermal zone registration documentation
thermal: trip: Avoid skipping trips in thermal_zone_set_trips()
thermal: intel: int340x: Free MSI IRQ vectors on module exit
thermal: intel: int340x: Allow limited thermal MSI support
thermal: intel: int340x: Fix kernel warning during MSI cleanup
Pull arm64 fixes from Catalin Marinas:
- Expand the speculative SSBS errata workaround to more CPUs
- Ensure jump label changes are visible to all CPUs with a
kick_all_cpus_sync() (and also enable jump label batching as part of
the fix)
- The shadow call stack sanitiser is currently incompatible with Rust,
make CONFIG_RUST conditional on !CONFIG_SHADOW_CALL_STACK
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: jump_label: Ensure patched jump_labels are visible to all CPUs
rust: SHADOW_CALL_STACK is incompatible with Rust
arm64: errata: Expand speculative SSBS workaround (again)
arm64: cputype: Add Cortex-A725 definitions
arm64: cputype: Add Cortex-X1C definitions
Pull ceph fix from Ilya Dryomov:
"A fix for a potential hang in the MDS when cap revocation races with
the client releasing the caps in question, marked for stable"
* tag 'ceph-for-6.11-rc2' of https://github.com/ceph/ceph-client:
ceph: force sending a cap update msg back to MDS for revoke op
Pull kvm updates from Paolo Bonzini:
"The bulk of the changes here is a largish change to guest_memfd,
delaying the clearing and encryption of guest-private pages until they
are actually added to guest page tables. This started as "let's make
it impossible to misuse the API" for SEV-SNP; but then it ballooned a
bit.
The new logic is generally simpler and more ready for hugepage support
in guest_memfd.
Summary:
- fix latent bug in how usage of large pages is determined for
confidential VMs
- fix "underline too short" in docs
- eliminate log spam from limited APIC timer periods
- disallow pre-faulting of memory before SEV-SNP VMs are initialized
- delay clearing and encrypting private memory until it is added to
guest page tables
- this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages can
now be moved in the common kvm_gmem_populate() function
- fix compilation error that the RISC-V merge introduced in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
KVM: riscv: selftests: Fix compile error
KVM: guest_memfd: abstract how prepared folios are recorded
KVM: guest_memfd: let kvm_gmem_populate() operate only on private gfns
KVM: extend kvm_range_has_memory_attributes() to check subset of attributes
KVM: cleanup and add shortcuts to kvm_range_has_memory_attributes()
KVM: guest_memfd: move check for already-populated page to common code
KVM: remove kvm_arch_gmem_prepare_needed()
KVM: guest_memfd: make kvm_gmem_prepare_folio() operate on a single struct kvm
KVM: guest_memfd: delay kvm_gmem_prepare_folio() until the memory is passed to the guest
KVM: guest_memfd: return locked folio from __kvm_gmem_get_pfn
KVM: rename CONFIG_HAVE_KVM_GMEM_* to CONFIG_HAVE_KVM_ARCH_GMEM_*
KVM: guest_memfd: do not go through struct page
KVM: guest_memfd: delay folio_mark_uptodate() until after successful preparation
KVM: guest_memfd: return folio from __kvm_gmem_get_pfn()
KVM: x86: disallow pre-fault for SNP VMs before initialization
KVM: Documentation: Fix title underline too short warning
KVM: x86: Eliminate log spam from limited APIC timer periods
* fix latent bug in how usage of large pages is determined for
confidential VMs
* fix "underline too short" in docs
* eliminate log spam from limited APIC timer periods
* disallow pre-faulting of memory before SEV-SNP VMs are initialized
* delay clearing and encrypting private memory until it is added to
guest page tables
* this change also enables another small cleanup: the checks in
SNP_LAUNCH_UPDATE that limit it to non-populated, private pages
can now be moved in the common kvm_gmem_populate() function
