mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-16 17:12:50 -04:00
104f082f5ed6d19c5d85ca905ccd4e4d01aef66e
1434302 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jiayuan Chen
|
104f082f5e |
selftests: fib_nexthops: test stale has_v4 on nexthop replace
Add test cases that exercise the scenario where an IPv6 nexthop is
replaced with an IPv4 nexthop while being part of a group. The group's
has_v4 flag must be updated so that subsequent IPv6 route additions are
properly rejected.
Two cases are covered:
1. Gateway nexthop replaced across families with an existing IPv6
route on the group (rejected by fib6_check_nh_list).
2. Blackhole nexthop replaced across families with no existing IPv6
route on the group (fib6_check_nh_list returns early) — this is
the path that triggers a NULL ptr deref without the kernel fix.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260413114522.147784-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Jiayuan Chen
|
29c95185ba |
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3
Fixes:
|
||
|
Dudu Lu
|
f9e4066470 |
net/sched: sch_cake: fix NAT destination port not being updated in cake_update_flowkeys
cake_update_flowkeys() is supposed to update the flow dissector keys
with the NAT-translated addresses and ports from conntrack, so that
CAKE's per-flow fairness correctly identifies post-NAT flows as
belonging to the same connection.
For the source port, this works correctly:
keys->ports.src = port;
But for the destination port, the assignment is reversed:
port = keys->ports.dst;
This means the NAT destination port is never updated in the flow keys.
As a result, when multiple connections are NATed to the same destination,
CAKE treats them as separate flows because the original (pre-NAT)
destination ports differ. This breaks CAKE's NAT-aware flow isolation
when using the "nat" mode.
The bug was introduced in commit
|
||
|
Zhengchuan Liang
|
df46016532 |
net: bridge: use a stable FDB dst snapshot in RCU readers
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns.
Fixes:
|
||
|
Dudu Lu
|
fa92a77b0e |
macvlan: fix macvlan_get_size() not reserving space for IFLA_MACVLAN_BC_CUTOFF
macvlan_get_size() does not account for IFLA_MACVLAN_BC_CUTOFF, but macvlan_fill_info() conditionally includes it when port->bc_cutoff != 1. This causes nla_put_s32() to fail with -EMSGSIZE when the netlink skb runs out of space, triggering a WARN_ON in rtnetlink and preventing the interface from being dumped. The bug can be reproduced with: ip link add macvlan0 link eth0 type macvlan mode bridge ip link set macvlan0 type macvlan bc_cutoff 0 ip -d link show macvlan0 # fails with -EMSGSIZE The bc_cutoff feature was added in commit |
||
|
Dudu Lu
|
4510d14052 |
net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir
In tcf_blockcast_redir(), when iterating block ports to redirect
packets to multiple devices, the mac_header_xmit flag is queried
from the wrong device. The loop sends to dev_prev but queries
dev_is_mac_header_xmit(dev) — which is the NEXT device in the
iteration, not the one being sent to.
This causes tcf_mirred_to_dev() to make incorrect decisions about
whether to push or pull the MAC header. When the block contains
mixed device types (e.g., an ethernet veth and a tunnel device),
intermediate devices get the wrong mac_header_xmit flag, leading to
skb header corruption. In the worst case, skb_push_rcsum with an
incorrect mac_len can exhaust headroom and panic.
The last device in the loop is handled correctly (line 365-366 uses
dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste
oversight for the intermediate devices.
Fix by using dev_prev instead of dev for the mac_header_xmit query,
consistent with the device actually being sent to.
Fixes:
|
||
|
Linus Torvalds
|
1f5ffc6721 |
Fix mismerge of the arm64 / timer-core interrupt handling changes
Commit |
||
|
Linus Torvalds
|
5c0f43e853 |
Merge tag 'kernel-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pid_namespace updates from Christian Brauner:
- pid_namespace: make init creation more flexible
Annotate ->child_reaper accesses with {READ,WRITE}_ONCE() to protect
the unlocked readers from cpu/compiler reordering, and enforce that
pid 1 in a pid namespace is always the first allocated pid (the
set_tid path already required this).
On top of that, allow opening pid_for_children before the pid
namespace init has been created. This lets one process create the pid
namespace and a different process create the init via setns(), which
makes clone3(set_tid) usable in all cases evenly and is particularly
useful to CRIU when restoring nested containers.
A new selftest covers both the basic create-pidns-then-init flow and
the cross-process variant, and a MAINTAINERS entry for the pid
namespace code is added.
- unrelated signal cleanup: update outdated comment for the removed
freezable_schedule()
* tag 'kernel-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signal: update outdated comment for removed freezable_schedule()
MAINTAINERS: add a pid namespace entry
selftests: Add tests for creating pidns init via setns
pid_namespace: allow opening pid_for_children before init was created
pid: check init is created first after idr alloc
pid_namespace: avoid optimization of accesses to ->child_reaper
|
||
|
Linus Torvalds
|
7c8a4671dc |
Merge tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for
open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for
container runtimes and other namespace-based isolation mechanisms.
This accompanies OPEN_TREE_NAMESPACE and avoids a needless detour via
OPEN_TREE_NAMESPACE to get the same effect. Will be especially useful
when you mount an actual filesystem to be used as the container
rootfs.
- Currently, creating a new mount namespace always copies the entire
mount tree from the caller's namespace. For containers and sandboxes
that intend to build their mount table from scratch this is wasteful:
they inherit a potentially large mount tree only to immediately tear
it down.
This series adds support for creating a mount namespace that contains
only a clone of the root mount, with none of the child mounts. Two
new flags are introduced:
- CLONE_EMPTY_MNTNS (0x400000000) for clone3(), using the 64-bit flag space
- UNSHARE_EMPTY_MNTNS (0x00100000) for unshare()
Both flags imply CLONE_NEWNS. The resulting namespace contains a
single nullfs root mount with an immutable empty directory. The
intended workflow is to then mount a real filesystem (e.g., tmpfs)
over the root and build the mount table from there.
- Allow MOVE_MOUNT_BENEATH to target the caller's rootfs, allowing to
switch out the rootfs without pivot_root(2).
The traditional approach to switching the rootfs involves
pivot_root(2) or a chroot_fs_refs()-based mechanism that atomically
updates fs->root for all tasks sharing the same fs_struct. This has
consequences for fork(), unshare(CLONE_FS), and setns().
This series instead decomposes root-switching into individually
atomic, locally-scoped steps:
fd_tree = open_tree(-EBADF, "/newroot", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC);
fchdir(fd_tree);
move_mount(fd_tree, "", AT_FDCWD, "/", MOVE_MOUNT_BENEATH | MOVE_MOUNT_F_EMPTY_PATH);
chroot(".");
umount2(".", MNT_DETACH);
Since each step only modifies the caller's own state, the
fork/unshare/setns races are eliminated by design.
A key step to making this possible is to remove the locked mount
restriction. Originally MOVE_MOUNT_BENEATH doesn't support mounting
beneath a mount that is locked. The locked mount protects the
underlying mount from being revealed. This is a core mechanism of
unshare(CLONE_NEWUSER | CLONE_NEWNS). The mounts in the new mount
namespace become locked. That effectively makes the new mount table
useless as the caller cannot ever get rid of any of the mounts no
matter how useless they are.
We can lift this restriction though. We simply transfer the locked
property from the top mount to the mount beneath. This works because
what we care about is to protect the underlying mount aka the parent.
The mount mounted between the parent and the top mount takes over the
job of protecting the parent mount from the top mount mount. This
leaves us free to remove the locked property from the top mount which
can consequently be unmounted:
unshare(CLONE_NEWUSER | CLONE_NEWNS)
and we inherit a clone of procfs on /proc then currently we cannot
unmount it as:
umount -l /proc
will fail with EINVAL because the procfs mount is locked.
After this series we can now do:
mount --beneath -t tmpfs tmpfs /proc
umount -l /proc
after which a tmpfs mount has been placed beneath the procfs mount.
The tmpfs mount has become locked and the procfs mount has become
unlocked.
This means you can safely modify an inherited mount table after
unprivileged namespace creation.
Afterwards we simply make it possible to move a mount beneath the
rootfs allowing to upgrade the rootfs.
Removing the locked restriction makes this very useful for containers
created with unshare(CLONE_NEWUSER | CLONE_NEWNS) to reshuffle an
inherited mount table safely and MOVE_MOUNT_BENEATH makes it possible
to switch out the rootfs instead of using the costly pivot_root(2).
* tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/namespaces: remove unused utils.h include from listns_efault_test
selftests/fsmount_ns: add missing TARGETS and fix cap test
selftests/empty_mntns: fix wrong CLONE_EMPTY_MNTNS hex value in comment
selftests/empty_mntns: fix statmount_alloc() signature mismatch
selftests/statmount: remove duplicate wait_for_pid()
mount: always duplicate mount
selftests/filesystems: add MOVE_MOUNT_BENEATH rootfs tests
move_mount: allow MOVE_MOUNT_BENEATH on the rootfs
move_mount: transfer MNT_LOCKED
selftests/filesystems: add clone3 tests for empty mount namespaces
selftests/filesystems: add tests for empty mount namespaces
namespace: allow creating empty mount namespaces
selftests: add FSMOUNT_NAMESPACE tests
selftests/statmount: add statmount_alloc() helper
tools: update mount.h header
mount: add FSMOUNT_NAMESPACE
mount: simplify __do_loopback()
mount: start iterating from start of rbtree
|
||
|
Linus Torvalds
|
91a4855d6c |
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
||
|
Linus Torvalds
|
f5ad410100 |
Merge tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
|
||
|
Linus Torvalds
|
e997ac58ad |
Merge tag 'linux_kselftest-next-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- cpu-hotplug: fix to check if cpu hotplug is supported to avoid
test failures when cpu hotplug isn't supported.
- frace: fix to relevant comparisons and path checks in the helper so
it handles those patterns without spurious shell warnings.
- runner.sh: add ktrap support
- tracing: fix to make --logdir option work again
- tracing: fix to check awk supports non POSIX strtonum()
- mqueue: fix incorrectly named settings file to make sure the test
used the correct timeout value
- kselftest:
- fix to treat xpass as successful result
- add ksft_reset_state()
- kselftest_harness:
- validate kselftest exit codes are handled explicitly
- add detection of invalid mixing of kselftest and harness
functionality
- add validation of intermixing of kselftest and harness
functionality
- run_kselftest.sh:
- remove unused $ROOT
- resolve BASE_DIR with pwd -P to avoid dependency on realpath
or readlink commands to generate a physical absolute path for
BASE_DIR
- allow choosing per-test log directory
- preserve subtarget failures in all/install
* tag 'linux_kselftest-next-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Quote check_requires comparisons
selftests: Preserve subtarget failures in all/install
selftests/run_kselftest.sh: Allow choosing per-test log directory
selftests/run_kselftest.sh: Resolve BASE_DIR with pwd -P
selftests/run_kselftest.sh: Remove unused $ROOT
selftests/cpu-hotplug: Fix check for cpu hotplug not supported
selftests/mqueue: Fix incorrectly named file
selftests: Use ktap helpers for runner.sh
selftests: harness: Validate intermixing of kselftest and harness functionality
selftests: harness: Detect illegal mixing of kselftest and harness functionality
selftests: kselftest: Add ksft_reset_state()
selftests: harness: Validate that explicit kselftest exitcodes are handled
selftests: kselftest: Treat xpass as successful result
selftests/tracing: Fix to check awk supports non POSIX strtonum()
selftests/tracing: Fix to make --logdir option work again
|
||
|
Linus Torvalds
|
6198c86a97 |
Merge tag 'linux_kselftest-kunit-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit tool updates from Shuah Khan: - terminate kernel under test on SIGINT when it catches SIGINT to make sure the TTY isn't messed up and terminate the running kernel - recommend --raw_output=all when KTAP header isn't found in the kernel output, it's useful to re-run the test with --raw_output=all to find out the reasons why the test didn't complete. - skip stty when stdin is not a tty to avoid writing noise to stderr. - show suites when user runs --list_suites option instead of entire list of tests to make the output user friendly and concise. * tag 'linux_kselftest-kunit-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Terminate kernel under test on SIGINT kunit: tool: skip stty when stdin is not a tty kunit: tool: Recommend --raw_output=all if no KTAP found kunit: Add --list_suites to show suites |
||
|
Linus Torvalds
|
88b29f3f57 |
Merge tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
|
||
|
Linus Torvalds
|
ee60c510fb |
Merge tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh: - Many new features and optimizations to printf() - Rename non-standard symbols to avoid collisions with application code - Support for byteswap.h, endian.h, err.h and asprintf() - 64-bit dev_t - Smaller cleanups and fixes to the code and build system * tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (61 commits) selftests/nolibc: use gcc 15 tools/nolibc: support UBSAN on gcc tools/nolibc: create __nolibc_no_sanitize_ubsan selftests/nolibc: don't skip tests for unimplemented syscalls anymore selftests/nolibc: explicitly handle ENOSYS from ptrace() tools/nolibc: add byteorder conversions tools/nolibc: add the _syscall() macro tools/nolibc: move the call to __sysret() into syscall() tools/nolibc: rename the internal macros used in syscall() selftests/nolibc: only use libgcc when really necessary selftests/nolibc: test the memory allocator tools/nolibc: check for overflow in calloc() without divisions tools/nolibc: add support for asprintf() tools/nolibc: use __builtin_offsetof() tools/nolibc: use makedev() in fstatat() tools/nolibc: handle all major and minor numbers in makedev() and friends tools/nolibc: make dev_t 64 bits wide tools/nolibc: move the logic of makedev() and friends into functions selftests/nolibc: add a test for stat().st_rdev selftests/nolibc: add some tests for makedev() and friends ... |
||
|
Linus Torvalds
|
3203a08c12 |
Merge tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan: - powerpc support for huge pfnmaps - Cleanups to use masked user access - Rework pnv_ioda_pick_m64_pe() to use better bitmap API - Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC - Backup region offset update to eflcorehdr - Fixes for wii/ps3 platform - Implement JIT support for private stack in powerpc - Implement JIT support for fsession in powerpc64 trampoline - Add support for instruction array and indirect jump in powerpc - Misc selftest fixes and cleanups Thanks to Abhishek Dubey, Aditya Gupta, Alex Williamson, Amit Machhiwal, Andrew Donnellan, Bartosz Golaszewski, Cédric Le Goater, Chen Ni, Christophe Leroy (CS GROUP), Hari Bathini, J. Neuschäfer, Mukesh Kumar Chaurasiya (IBM), Nam Cao, Nilay Shroff, Pavithra Prakash, Randy Dunlap, Ritesh Harjani (IBM), Shrikanth Hegde, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote, and Yury Norov (NVIDIA) * tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (47 commits) mailmap: Add entry for Andrew Donnellan powerpc32/bpf: fix loading fsession func metadata using PPC_LI32 selftest/bpf: Enable gotox tests for powerpc64 powerpc64/bpf: Add support for indirect jump selftest/bpf: Enable instruction array test for powerpc powerpc/bpf: Add support for instruction array powerpc32/bpf: Add fsession support powerpc64/bpf: Implement fsession support selftests/bpf: Enable private stack tests for powerpc64 powerpc64/bpf: Implement JIT support for private stack powerpc: pci-ioda: Optimize pnv_ioda_pick_m64_pe() powerpc: pci-ioda: use bitmap_alloc() in pnv_ioda_pick_m64_pe() powerpc/net: Inline checksum wrappers and convert to scoped user access powerpc/sstep: Convert to scoped user access powerpc/align: Convert emulate_spe() to scoped user access powerpc/ptrace: Convert gpr32_set_common_user() to scoped user access powerpc/futex: Use masked user access powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC cpuidle: powerpc: avoid double clear when breaking snooze powerpc/ps3: spu.c: fix enum and Return kernel-doc warnings ... |
||
|
Linus Torvalds
|
e6b162a63f |
Merge tag 'm68knommu-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer: - fix task info flags handling for 68000 nommu * tag 'm68knommu-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: Fix task info flags handling for 68000 |
||
|
Linus Torvalds
|
c43267e679 |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest changes are MPAM enablement in drivers/resctrl and new PMU
support under drivers/perf.
On the core side, FEAT_LSUI lets futex atomic operations with EL0
permissions, avoiding PAN toggling.
The rest is mostly TLB invalidation refactoring, further generic entry
work, sysreg updates and a few fixes.
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for
better control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using
resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can
use resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (109 commits)
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
ACPI: AGDI: fix missing newline in error message
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
...
|
||
|
Linus Torvalds
|
508fed6795 |
Merge tag 'ras_core_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov: - Add new AMD MCA bank names and types to the MCA code, preceded by a clean up of the relevant places to have them more developer-friendly (read: sort them alphanumerically and clean up comments) such that adding new banks is easy * tag 'ras_core_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce, EDAC/mce_amd: Add new SMCA bank types x86/mce, EDAC/mce_amd: Update CS bank type naming x86/mce, EDAC/mce_amd: Reorder SMCA bank type enums |
||
|
Linus Torvalds
|
1834703b84 |
Merge tag 'edac_updates_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov: - amd64_edac: Add support for AMD Zen 3 (family 19h, models 40h–4fh) - i10nm: Add GNR error information decoder support as an alternative to the firmware decoder - versalnet: Restructure the init/teardown logic for correct and more readable error handling. Also, fix two memory leaks and a resource leak - Convert several internal structs to use bounded flex arrays, enabling the kernel's runtime checker to catch out-of-bounds memory accesses - Mark various sysfs attribute tables read-only, preventing accidental modification at runtime - The usual fixes and cleanups across the subsystem * tag 'edac_updates_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/mc: Use kzalloc_flex() EDAC/ie31200: Make rpl_s_cfg static EDAC/i10nm: Fix spelling mistake "readd" -> "read" EDAC/versalnet: Fix device_node leak in mc_probe() EDAC/versalnet: Fix memory leak in remove and probe error paths EDAC/amd64: Add support for family 19h, models 40h-4fh EDAC/i10nm: Add driver decoder for Granite Rapids server EDAC/sb: Use kzalloc_flex() EDAC/i7core: Use kzalloc_flex() EDAC/mpc85xx: Constify device sysfs attributes EDAC/device: Allow addition of const sysfs attributes EDAC/pci_sysfs: Constify instance sysfs attributes EDAC/device: Constify info sysfs attributes EDAC/device: Drop unnecessary and dangerous casts of attributes EDAC/device: Drop unused macro to_edacdev_attr() EDAC/altera: Drop unused field eccmgr_sysfs_attr EDAC/versalnet: Refactor memory controller initialization and cleanup |
||
|
Linus Torvalds
|
60b8d4d492 |
Merge tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov: - Change the SEV host code handling of when SNP gets enabled in order to allow the machine to claim SNP-related resources only when SNP guests are really going to be launched. The user requests this by loading the ccp module and thus it controls when SNP initialization is done So export an API which module code can call and do the necessary SNP setup only when really needed - Drop an unnecessary write-back and invalidate operation that was being performed too early, since the ccp driver already issues its own at the correct point in the initialization sequence - Drop the hotplug callbacks for enabling SNP on newly onlined CPUs, which were both architecturally unsound (the firmware rejects initialization if any CPU lacks the required configuration) and buggy (the MFDM SYSCFG MSR bit was not being set) - Code refactoring and cleanups to accomplish the above * tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: crypto/ccp: Update HV_FIXED page states to allow freeing of memory crypto/ccp: Implement SNP x86 shutdown x86/sev, crypto/ccp: Move HSAVE_PA setup to arch/x86/ x86/sev, crypto/ccp: Move SNP init to ccp driver x86/sev: Create snp_shutdown() x86/sev: Create snp_prepare() x86/sev: Create a function to clear/zero the RMP x86/sev: Rename SNP_FEATURES_PRESENT to SNP_FEATURES_IMPL x86/virt/sev: Keep the RMP table bookkeeping area mapped x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN x86/virt/sev: Drop support for SNP hotplug |
||
|
Linus Torvalds
|
970216e023 |
Merge tag 'x86_misc_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov: - Reference the tip tree maintainer handbook directly from the relevant MAINTAINERS file entries (covering timers, IRQ, locking, scheduling, perf, x86, and others) so that contributors and tooling can know where to look - Enable interrupt remapping in defconfig, which is an architectural requirement for x2APIC to function correctly on bare metal. Without it, x2APIC was effectively enabled but non-functional. - Ensure that drivers which register custom restart handlers (such as those needed for SoC-based x86 devices like Intel Lightning Mountain) are actually invoked during reboot, bringing x86 in line with how other architectures handle this. - Cleanups * tag 'x86_misc_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add references to tip tree handbook x86/64/defconfig: Add CONFIG_IRQ_REMAP x86/reboot: Execute the kernel restart handler upon machine restart x86/mtrr: Use kstrtoul() in parse_mtrr_spare_reg() |
||
|
Linus Torvalds
|
cd4cdc53cc |
Merge tag 'x86_microcode_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov: "The kernel carries a table of Intel CPUs family, model, stepping, etc tuples which say what is the latest microcode for that particular CPU. Some CPU variants differ only by the platform ID which determines what microcode needs to be loaded on them. Carve out the platform ID handling from the microcode loader and make it available in a more generic place so that the old microcode verification machinery can use it" * tag 'x86_microcode_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Add platform mask to Intel microcode "old" list x86/cpu: Add platform ID to CPU matching structure x86/cpu: Add platform ID to CPU info structure x86/microcode: Refactor platform ID enumeration into a helper |
||
|
Linus Torvalds
|
e9635f2a73 |
Merge tag 'x86_fred_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED updates from Borislav Petkov: "We made the FRED support an opt-in initially out of fear of it breaking machines left and right in the case of a hw bug in the first generation of machines supporting it. Now that that the FRED code has seen a lot of hammering, flip the logic to be opt-out as is the usual case with new hw features" * tag 'x86_fred_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fred: Remove kernel log message when initializing exceptions x86/fred: Enable FRED by default |
||
|
Linus Torvalds
|
fabd5a8d24 |
Merge tag 'x86_cache_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov: - Add return value descriptions to several internal functions, addressing kernel-doc complaints - Add the x86 maintainer mailing list to the resctrl section so they are automatically included in patch submissions, and reference the applicable contribution rules document - Allow users to apply a single Capacity Bitmask to all cache domains at once using '*' as a shorthand, instead of having to specify each domain individually. This is particularly user-friendly on high core-count systems with many cache clusters - When a user provides a non-existent domain ID while configuring cache allocation, ensure the failure reason is properly reported to the user rather than silently returning an error with a misleading "ok" status * tag 'x86_cache_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/resctrl: Add missing return value descriptions MAINTAINERS: Update resctrl entry fs/resctrl: Add "*" shorthand to set io_alloc CBM for all domains fs/resctrl: Report invalid domain ID when parsing io_alloc_cbm |
||
|
Linus Torvalds
|
883af1f8e8 |
Merge tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen: "The only real thing of note here is printing the TDX module version. This is a little silly on its own, but the upcoming TDX module update code needs the same TDX module call. This shrinks that set a wee bit. There's also few minor macro cleanups and a tweak to the GetQuote ABI to make it easier for userspace to detect zero-length (failed) quotes" * tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt: tdx-guest: Return error for GetQuote failures KVM/TDX: Rename KVM_SUPPORTED_TD_ATTRS to KVM_SUPPORTED_TDX_TD_ATTRS x86/tdx: Rename TDX_ATTR_* to TDX_TD_ATTR_* KVM/TDX: Remove redundant definitions of TDX_TD_ATTR_* x86/tdx: Fix the typo in TDX_ATTR_MIGRTABLE x86/virt/tdx: Print TDX module version during init x86/virt/tdx: Retrieve TDX module version |
||
|
Linus Torvalds
|
51efd08647 |
Merge tag 'x86_mm_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen: - Convert x86 code to use generic "pagetable" APIs and ptdescs This aligns some the set_memory*() code better with the new page table APIs, especially using ptdescs as opposed to 'struct page' directly. * tag 'x86_mm_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/pat: Convert split_large_page() to use ptdescs x86/mm/pat: Convert populate_pgd() to use page table apis x86/mm/pat: Convert pmd code to use page table apis x86/mm/pat: Convert pte code to use page table apis |
||
|
Linus Torvalds
|
9f2bb6c7b3 |
Merge tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Dave Hansen: - Complete LASS enabling: deal with vsyscall and EFI The existing Linear Address Space Separation (LASS) support punted on support for common EFI and vsyscall configs. Complete the implementation by supporting EFI and vsyscall=xonly. - Clean up CPUID usage in newer Intel "avs" audio driver and update the x86-cpuid-db file * tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.0 ASoC: Intel: avs: Include CPUID header at file scope ASoC: Intel: avs: Check maximum valid CPUID leaf x86/cpu: Remove LASS restriction on vsyscall emulation x86/vsyscall: Disable LASS if vsyscall mode is set to EMULATE x86/vsyscall: Restore vsyscall=xonly mode under LASS x86/traps: Consolidate user fixups in the #GP handler x86/vsyscall: Reorganize the page fault emulation code x86/cpu: Remove LASS restriction on EFI x86/efi: Disable LASS while executing runtime services x86/cpu: Defer LASS enabling until userspace comes up |
||
|
Linus Torvalds
|
49b30f3e9c |
Merge tag 'x86-vdso-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso updates from Ingo Molnar: "vdso cleanups by Thomas Weißschuh: - Clean up remnants of VDSO32_NOTE_MASK - Drop pointless #ifdeffery in vvar_vclock_fault()" * tag 'x86-vdso-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Drop pointless #ifdeffery in vvar_vclock_fault() x86/vdso: Clean up remnants of VDSO32_NOTE_MASK |
||
|
Linus Torvalds
|
0972ba5605 |
Merge tag 'x86-platform-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
- Remove M486/M486SX/ELAN support, first minimal step (Ingo Molnar)
- Print AGESA string from DMI additional information entry (Yazen
Ghannam, Mario Limonciello)
- Improve and fix the DMI code (Mario Limonciello):
- Correct an indexing error in <linux/dmi.h>
- Adjust dmi_decode() to use enums <linux/dmi.h>
- Add pr_fmt() for dmi_scan.c to fix & standardize the log prefixes
* tag 'x86-platform-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Print AGESA string from DMI additional information entry
firmware: dmi: Add pr_fmt() for dmi_scan.c
firmware: dmi: Adjust dmi_decode() to use enums
firmware: dmi: Correct an indexing error in dmi.h
x86/cpu: Remove M486/M486SX/ELAN support
|
||
|
Linus Torvalds
|
ac633ba77c |
Merge tag 'x86-cleanups-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar: - Consolidate AMD and Hygon cases in parse_topology() (Wei Wang) - asm constraints cleanups in __iowrite32_copy() (Uros Bizjak) - Drop AMD Extended Interrupt LVT macros (Naveen N Rao) - Don't use REALLY_SLOW_IO for delays (Juergen Gross) - paravirt cleanups (Juergen Gross) - FPU code cleanups (Borislav Petkov) - split-lock handling code cleanups (Borislav Petkov, Ronan Pigott) * tag 'x86-cleanups-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Correct the comment explaining what xfeatures_in_use() does x86/split_lock: Don't warn about unknown split_lock_detect parameter x86/fpu: Correct misspelled xfeaures_to_write local var x86/apic: Drop AMD Extended Interrupt LVT macros x86/cpu/topology: Consolidate AMD and Hygon cases in parse_topology() block/floppy: Don't use REALLY_SLOW_IO for delays x86/paravirt: Replace io_delay() hook with a bool x86/irqflags: Preemptively move include paravirt.h directive where it belongs x86/split_lock: Restructure the unwieldy switch-case in sld_state_show() x86/local: Remove trailing semicolon from _ASM_XADD in local_add_return() x86/asm: Use inout "+" asm onstraint modifiers in __iowrite32_copy() |
||
|
Linus Torvalds
|
2ee08a8963 |
Merge tag 'x86-asm-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm from Ingo Molnar:
"x86 asm cleanups by Uros Bizjak:
- Remove unnecessary memory clobbers from FS/GS base (read-)
accessors and savesegment()
- Use ASM_INPUT_RM in __loadsegment_fs() to work around clang code
generation problems
- Implement loadsegment()/savesegment() macros with static inline
helpers
- Use savesegment() for segment register reads in ELF core dump and
__show_regs()
- Use correct type for 'gs' variable in __show_regs() to avoid
zero-extension
- Clean up 'sel' variable usage in do_set_thread_area()"
* tag 'x86-asm-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tls: Clean up 'sel' variable usage in do_set_thread_area()
x86/process/32: Use correct type for 'gs' variable in __show_regs() to avoid zero-extension
x86/process/64: Use savesegment() in __show_regs() instead of inline asm
x86/elf: Use savesegment() for segment register reads in ELF core dump
x86/asm/segment: Implement loadsegment()/savesegment() macros with static inline helpers
x86/asm/segment: Use ASM_INPUT_RM in __loadsegment_fs()
x86/asm/segment: Remove unnecessary "memory" clobber from savesegment()
x86/asm/fsgsbase: Remove unnecessary "memory" clobbers from FS/GS base (read-) accessors
|
||
|
Linus Torvalds
|
1c3b68f0d5 |
Merge tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduling updates:
- Skip SCHED_IDLE rq for SCHED_IDLE tasks (Christian Loehle)
- Remove superfluous rcu_read_lock() in the wakeup path (K Prateek Nayak)
- Simplify the entry condition for update_idle_cpu_scan() (K Prateek Nayak)
- Simplify SIS_UTIL handling in select_idle_cpu() (K Prateek Nayak)
- Avoid overflow in enqueue_entity() (K Prateek Nayak)
- Update overutilized detection (Vincent Guittot)
- Prevent negative lag increase during delayed dequeue (Vincent Guittot)
- Clear buddies for preempt_short (Vincent Guittot)
- Implement more complex proportional newidle balance (Peter Zijlstra)
- Increase weight bits for avg_vruntime (Peter Zijlstra)
- Use full weight to __calc_delta() (Peter Zijlstra)
RT and DL scheduling updates:
- Fix incorrect schedstats for rt and dl thread (Dengjun Su)
- Skip group schedulable check with rt_group_sched=0 (Michal Koutný)
- Move group schedulability check to sched_rt_global_validate()
(Michal Koutný)
- Add reporting of runtime left & abs deadline to sched_getattr()
for DEADLINE tasks (Tommaso Cucinotta)
Scheduling topology updates by K Prateek Nayak:
- Compute sd_weight considering cpuset partitions
- Extract "imb_numa_nr" calculation into a separate helper
- Allocate per-CPU sched_domain_shared in s_data
- Switch to assigning "sd->shared" from s_data
- Remove sched_domain_shared allocation with sd_data
Energy-aware scheduling updates:
- Filter false overloaded_group case for EAS (Vincent Guittot)
- PM: EM: Switch to rcu_dereference_all() in wakeup path
(Dietmar Eggemann)
Infrastructure updates:
- Replace use of system_unbound_wq with system_dfl_wq (Marco Crivellari)
Proxy scheduling updates by John Stultz:
- Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
- Minimise repeated sched_proxy_exec() checking
- Fix potentially missing balancing with Proxy Exec
- Fix and improve task::blocked_on et al handling
- Add assert_balance_callbacks_empty() helper
- Add logic to zap balancing callbacks if we pick again
- Move attach_one_task() and attach_task() helpers to sched.h
- Handle blocked-waiter migration (and return migration)
- Add K Prateek Nayak to scheduler reviewers for proxy execution
Misc cleanups and fixes by John Stultz, Joseph Salisbury, Peter
Zijlstra, K Prateek Nayak, Michal Koutný, Randy Dunlap, Shrikanth
Hegde, Vincent Guittot, Zhan Xusheng, Xie Yuanbin and Vincent Guittot"
* tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
sched/eevdf: Clear buddies for preempt_short
sched/rt: Cleanup global RT bandwidth functions
sched/rt: Move group schedulability check to sched_rt_global_validate()
sched/rt: Skip group schedulable check with rt_group_sched=0
sched/fair: Avoid overflow in enqueue_entity()
sched: Use u64 for bandwidth ratio calculations
sched/fair: Prevent negative lag increase during delayed dequeue
sched/fair: Use sched_energy_enabled()
sched: Handle blocked-waiter migration (and return migration)
sched: Move attach_one_task and attach_task helpers to sched.h
sched: Add logic to zap balance callbacks if we pick again
sched: Add assert_balance_callbacks_empty helper
sched/locking: Add special p->blocked_on==PROXY_WAKING value for proxy return-migration
sched: Fix modifying donor->blocked on without proper locking
locking: Add task::blocked_lock to serialize blocked_on state
sched: Fix potentially missing balancing with Proxy Exec
sched: Minimise repeated sched_proxy_exec() checking
sched: Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
MAINTAINERS: Add K Prateek Nayak to scheduler reviewers
sched/core: Get this cpu once in ttwu_queue_cond()
...
|
||
|
Linus Torvalds
|
33c66eb5e9 |
Merge tag 'perf-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core updates:
- Try to allocate task_ctx_data quickly, to optimize O(N^2) algorithm
on large systems with O(100k) threads (Namhyung Kim)
AMD PMU driver IBS support updates and fixes, by Ravi Bangoria:
- Fix interrupt accounting for discarded samples
- Fix a Zen5-specific quirk
- Fix PhyAddrVal handling
- Fix NMI-safety with perf_allow_kernel()
- Fix a race between event add and NMIs
Intel PMU driver updates:
- Only check GP counters for PEBS constraints validation (Dapeng Mi)
MSR driver:
- Turn SMI_COUNT and PPERF on by default, instead of a long list of
CPU models to enable them on (Kan Liang)
... and misc cleanups and fixes by Aldf Conte, Anshuman Khandual,
Namhyung Kim, Ravi Bangoria and Yen-Hsiang Hsu"
* tag 'perf-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/events: Replace READ_ONCE() with standard pgtable accessors
perf/x86/msr: Make SMI and PPERF on by default
perf/x86/intel/p4: Fix unused variable warning in p4_pmu_init()
perf/x86/intel: Only check GP counters for PEBS constraints validation
perf/x86/amd/ibs: Fix comment typo in ibs_op_data
perf/amd/ibs: Advertise remote socket capability
perf/amd/ibs: Enable streaming store filter
perf/amd/ibs: Enable RIP bit63 hardware filtering
perf/amd/ibs: Enable fetch latency filtering
perf/amd/ibs: Support IBS_{FETCH|OP}_CTL2[Dis] to eliminate RMW race
perf/amd/ibs: Add new MSRs and CPUID bits definitions
perf/amd/ibs: Define macro for ldlat mask and shift
perf/amd/ibs: Avoid race between event add and NMI
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
perf/amd/ibs: Preserve PhyAddrVal bit when clearing PhyAddr MSR
perf/amd/ibs: Limit ldlat->l3missonly dependency to Zen5
perf/amd/ibs: Account interrupt for discarded samples
perf/core: Simplify __detach_global_ctx_data()
perf/core: Try to allocate task_ctx_data quickly
perf/core: Pass GFP flags to attach_task_ctx_data()
|
||
|
Linus Torvalds
|
4b2bdc2221 |
Merge tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar: - KLP support updates and fixes (Song Liu) - KLP-build script updates and fixes (Joe Lawrence) - Support Clang RAX DRAP sequence, to address clang false positive (Josh Poimboeuf) - Reorder ORC register numbering to match regular x86 register numbering (Josh Poimboeuf) - Misc cleanups (Wentong Tian, Song Liu) * tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool/x86: Reorder ORC register numbering objtool: Support Clang RAX DRAP sequence livepatch/klp-build: report patch validation fuzz livepatch/klp-build: add terminal color output livepatch/klp-build: provide friendlier error messages livepatch/klp-build: improve short-circuit validation livepatch/klp-build: fix shellcheck complaints livepatch/klp-build: add Makefile with check target livepatch/klp-build: add grep-override function livepatch/klp-build: switch to GNU patch and recountdiff livepatch/klp-build: support patches that add/remove files objtool/klp: Correlate locals to globals objtool/klp: Match symbols based on demangled_name for global variables objtool/klp: Remove .llvm suffix in demangle_name() objtool/klp: Also demangle global objects objtool/klp: Use sym->demangled_name for symbol_name hash objtool/klp: Remove trailing '_' in demangle_name() objtool/klp: Remove redundant strcmp() in correlate_symbols() objtool: Use section/symbol type helpers |
||
|
Linus Torvalds
|
7393febcb1 |
Merge tag 'locking-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Mutexes:
- Add killable flavor to guard definitions (Davidlohr Bueso)
- Remove the list_head from struct mutex (Matthew Wilcox)
- Rename mutex_init_lockep() (Davidlohr Bueso)
rwsems:
- Remove the list_head from struct rw_semaphore and
replace it with a single pointer (Matthew Wilcox)
- Fix logic error in rwsem_del_waiter() (Andrei Vagin)
Semaphores:
- Remove the list_head from struct semaphore (Matthew Wilcox)
Jump labels:
- Use ATOMIC_INIT() for initialization of .enabled (Thomas Weißschuh)
- Remove workaround for old compilers in initializations
(Thomas Weißschuh)
Lock context analysis changes and improvements:
- Add context analysis for rwsems (Peter Zijlstra)
- Fix rwlock and spinlock lock context annotations (Bart Van Assche)
- Fix rwlock support in <linux/spinlock_up.h> (Bart Van Assche)
- Add lock context annotations in the spinlock implementation
(Bart Van Assche)
- signal: Fix the lock_task_sighand() annotation (Bart Van Assche)
- ww-mutex: Fix the ww_acquire_ctx function annotations
(Bart Van Assche)
- Add lock context support in do_raw_{read,write}_trylock()
(Bart Van Assche)
- arm64, compiler-context-analysis: Permit alias analysis through
__READ_ONCE() with CONFIG_LTO=y (Marco Elver)
- Add __cond_releases() (Peter Zijlstra)
- Add context analysis for mutexes (Peter Zijlstra)
- Add context analysis for rtmutexes (Peter Zijlstra)
- Convert futexes to compiler context analysis (Peter Zijlstra)
Rust integration updates:
- Add atomic fetch_sub() implementation (Andreas Hindborg)
- Refactor various rust_helper_ methods for expansion (Boqun Feng)
- Add Atomic<*{mut,const} T> support (Boqun Feng)
- Add atomic operation helpers over raw pointers (Boqun Feng)
- Add performance-optimal Flag type for atomic booleans, to avoid
slow byte-sized RMWs on architectures that don't support them.
(FUJITA Tomonori)
- Misc cleanups and fixes (Andreas Hindborg, Boqun Feng, FUJITA
Tomonori)
LTO support updates:
- arm64: Optimize __READ_ONCE() with CONFIG_LTO=y (Marco Elver)
- compiler: Simplify generic RELOC_HIDE() (Marco Elver)
Miscellaneous fixes and cleanups by Peter Zijlstra, Randy Dunlap,
Thomas Weißschuh, Davidlohr Bueso and Mikhail Gavrilov"
* tag 'locking-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
compiler: Simplify generic RELOC_HIDE()
locking: Add lock context annotations in the spinlock implementation
locking: Add lock context support in do_raw_{read,write}_trylock()
locking: Fix rwlock support in <linux/spinlock_up.h>
lockdep: Raise default stack trace limits when KASAN is enabled
cleanup: Optimize guards
jump_label: remove workaround for old compilers in initializations
jump_label: use ATOMIC_INIT() for initialization of .enabled
futex: Convert to compiler context analysis
locking/rwsem: Fix logic error in rwsem_del_waiter()
locking/rwsem: Add context analysis
locking/rtmutex: Add context analysis
locking/mutex: Add context analysis
compiler-context-analysys: Add __cond_releases()
locking/mutex: Remove the list_head from struct mutex
locking/semaphore: Remove the list_head from struct semaphore
locking/rwsem: Remove the list_head from struct rw_semaphore
rust: atomic: Update a safety comment in impl of `fetch_add()`
rust: sync: atomic: Update documentation for `fetch_add()`
rust: sync: atomic: Add fetch_sub()
...
|
||
|
Jakub Kicinski
|
35c2c39832 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes in preparation for the net-next PR. Conflicts: include/net/sch_generic.h |
||
|
Kory Maincent
|
6bb6bafa88 |
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
The kernel-doc comment header incorrectly referenced the function name pse_control_find_net_by_id() instead of the actual function name pse_control_find_by_id(). Correct the function name in the documentation to match the implementation. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260414150948.744618-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
18cd10d2af |
Merge branch 'wireguard-fixes-for-7-1-rc1'
Jason A. Donenfeld says: ==================== WireGuard fixes for 7.1-rc1 1) Asbjørn's YNL sample, finally merged. Sorry for the wait on this one. 2) A simplification to use kfree_rcu instead of call_rcu, since kfree_rcu now works with kmem caches. 3) A trivial formatting derp. 4) Fix for a deadlock by moving to using exit_rtnl instead of pre_exit. ==================== Link: https://patch.msgid.link/20260414153944.2742252-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Shardul Bankar
|
60a25ef8da |
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the pernet .pre_exit callback. This causes a hung task when another thread holds rtnl_mutex - the cleanup_net workqueue (or the setup_net failure rollback path) blocks indefinitely in wg_netns_pre_exit() waiting to acquire the lock. Convert to .exit_rtnl, introduced in commit |
||
|
Jason A. Donenfeld
|
f364db381c |
wireguard: allowedips: remove redundant space
Not a contentful commit, but amusingly found when porting
|
||
|
Asbjørn Sloth Tønnesen
|
121f416756 |
tools: ynl: add sample for wireguard
Add a sample application for WireGuard, using the generated C library.
The main benefit of this is to exercise the generated library,
which might be useful for future self-tests.
Example:
$ make -C tools/net/ynl/lib
$ make -C tools/net/ynl/generated
$ make -C tools/net/ynl/tests wireguard
$ ./tools/net/ynl/tests/wireguard
usage: ./tools/net/ynl/tests/wireguard <ifindex|ifname>
$ sudo ./tools/net/ynl/tests/wireguard wg-test
Interface 3: wg-test
Peer 6adfb183a4a2c94a2f92dab5ade762a4788[...]:
Data: rx: 42 / tx: 42 bytes
Allowed IPs:
0.0.0.0/0
::/0
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260414153944.2742252-3-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Fushuai Wang
|
e5549aecdd |
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
Replace call_rcu() + kmem_cache_free() with kfree_rcu() to simplify the code and reduce function size. Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20260414153944.2742252-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
e80d033851 |
Merge tag 'smp-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP core updates from Thomas Gleixner: - Switch smp_call_on_cpu() to user system_percpu_wq instead of system_wq a part of the ongoing workqueue restructuring - Improve the CSD-lock diagnostics for smp_call_function_single() to provide better debug mechanisms on weakly ordered systems. - Cache the current CPU number once in smp_call_function*() instead of retrieving it over and over. - Add missing kernel-doc comments all over the place * tag 'smp-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Use system_percpu_wq instead of system_wq smp: Improve smp_call_function_single() CSD-lock diagnostics smp: Get this_cpu once in smp_call_function smp: Add missing kernel-doc comments |
||
|
Linus Torvalds
|
f21f7b5162 |
Merge tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner: - Make the handling of compat functions consistent and more robust - Rework the underlying data store so that it is dynamically allocated, which allows the conversion of the last holdout SPARC64 to the generic VDSO implementation - Rework the SPARC64 VDSO to utilize the generic implementation - Mop up the left overs of the non-generic VDSO support in the core code - Expand the VDSO selftest and make them more robust - Allow time namespaces to be enabled independently of the generic VDSO support, which was not possible before due to SPARC64 not using it - Various cleanups and improvements in the related code * tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) timens: Use task_lock guard in timens_get*() timens: Use mutex guard in proc_timens_set_offset() timens: Simplify some calls to put_time_ns() timens: Add a __free() wrapper for put_time_ns() timens: Remove dependency on the vDSO vdso/timens: Move functions to new file selftests: vDSO: vdso_test_correctness: Add a test for time() selftests: vDSO: vdso_test_correctness: Use facilities from parse_vdso.c selftests: vDSO: vdso_test_correctness: Handle different tv_usec types selftests: vDSO: vdso_test_correctness: Drop SYS_getcpu fallbacks selftests: vDSO: vdso_test_gettimeofday: Remove nolibc checks Revert "selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers" random: vDSO: Remove ifdeffery random: vDSO: Trim vDSO includes vdso/datapage: Trim down unnecessary includes vdso/datapage: Remove inclusion of gettimeofday.h vdso/helpers: Explicitly include vdso/processor.h vdso/gettimeofday: Add explicit includes random: vDSO: Add explicit includes MIPS: vdso: Explicitly include asm/vdso/vdso.h ... |
||
|
Linus Torvalds
|
c1fe867b5b |
Merge tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- A rework of the hrtimer subsystem to reduce the overhead for
frequently armed timers, especially the hrtick scheduler timer:
- Better timer locality decision
- Simplification of the evaluation of the first expiry time by
keeping track of the neighbor timers in the RB-tree by providing
a RB-tree variant with neighbor links. That avoids walking the
RB-tree on removal to find the next expiry time, but even more
important allows to quickly evaluate whether a timer which is
rearmed changes the position in the RB-tree with the modified
expiry time or not. If not, the dequeue/enqueue sequence which
both can end up in rebalancing can be completely avoided.
- Deferred reprogramming of the underlying clock event device. This
optimizes for the situation where a hrtimer callback sets the
need resched bit. In that case the code attempts to defer the
re-programming of the clock event device up to the point where
the scheduler has picked the next task and has the next hrtick
timer armed. In case that there is no immediate reschedule or
soft interrupts have to be handled before reaching the reschedule
point in the interrupt entry code the clock event is reprogrammed
in one of those code paths to prevent that the timer becomes
stale.
- Support for clocksource coupled clockevents
The TSC deadline timer is coupled to the TSC. The next event is
programmed in TSC time. Currently this is done by converting the
CLOCK_MONOTONIC based expiry value into a relative timeout,
converting it into TSC ticks, reading the TSC adding the delta
ticks and writing the deadline MSR.
As the timekeeping core has the conversion factors for the TSC
already, the whole back and forth conversion can be completely
avoided. The timekeeping core calculates the reverse conversion
factors from nanoseconds to TSC ticks and utilizes the base
timestamps of TSC and CLOCK_MONOTONIC which are updated once per
tick. This allows a direct conversion into the TSC deadline value
without reading the time and as a bonus keeps the deadline
conversion in sync with the TSC conversion factors, which are
updated by adjtimex() on systems with NTP/PTP enabled.
- Allow inlining of the clocksource read and clockevent write
functions when they are tiny enough, e.g. on x86 RDTSC and WRMSR.
With all those enhancements in place a hrtick enabled scheduler
provides the same performance as without hrtick. But also other
hrtimer users obviously benefit from these optimizations.
- Robustness improvements and cleanups of historical sins in the
hrtimer and timekeeping code.
- Rewrite of the clocksource watchdog.
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design,
which was made in the context of systems far smaller than today, is
based on the assumption that the to be monitored clocksource (TSC)
can be trivially compared against a known to be stable clocksource
(HPET/ACPI-PM timer).
Over the years this rather naive approach turned out to have major
flaws. Long delays between the watchdog invocations can cause wrap
arounds of the reference clocksource. The access to the reference
clocksource degrades on large multi-sockets systems dure to
interconnect congestion. This has been addressed with various
heuristics which degraded the accuracy of the watchdog to the point
that it fails to detect actual TSC problems on older hardware which
exposes slow inter CPU drifts due to firmware manipulating the TSC to
hide SMI time.
The rewrite addresses this by:
- Restricting the validation against the reference clocksource to
the boot CPU which is usually closest to the legacy block which
contains the reference clocksource (HPET/ACPI-PM).
- Do a round robin validation betwen the boot CPU and the other
CPUs based only on the TSC with an algorithm similar to the TSC
synchronization code during CPU hotplug.
- Being more leniant versus remote timeouts
- The usual tiny fixes, cleanups and enhancements all over the place
* tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
alarmtimer: Access timerqueue node under lock in suspend
hrtimer: Fix incorrect #endif comment for BITS_PER_LONG check
posix-timers: Fix stale function name in comment
timers: Get this_cpu once while clearing the idle state
clocksource: Rewrite watchdog code completely
clocksource: Don't use non-continuous clocksources as watchdog
x86/tsc: Handle CLOCK_SOURCE_VALID_FOR_HRES correctly
MIPS: Don't select CLOCKSOURCE_WATCHDOG
parisc: Remove unused clocksource flags
hrtimer: Add a helper to retrieve a hrtimer from its timerqueue node
hrtimer: Remove trailing comma after HRTIMER_MAX_CLOCK_BASES
hrtimer: Mark index and clockid of clock base as const
hrtimer: Drop unnecessary pointer indirection in hrtimer_expire_entry event
hrtimer: Drop spurious space in 'enum hrtimer_base_type'
hrtimer: Don't zero-initialize ret in hrtimer_nanosleep()
hrtimer: Remove hrtimer_get_expires_ns()
timekeeping: Mark offsets array as const
timekeeping/auxclock: Consistently use raw timekeeper for tk_setup_internals()
timer_list: Print offset as signed integer
tracing: Use explicit array size instead of sentinel elements in symbol printing
...
|
||
|
Linus Torvalds
|
1d5e40351e |
Merge tag 'irq-msi-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt update from Thomas Gleixner: "A small update for the MSI interrupt library to check for callers which fail to provide the mandatory irq_write_msi_msg() callback, which prevents a NULL pointer dereference later" * tag 'irq-msi-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/msi-lib: Refuse initialization when irq_write_msi_msg() is missing |
||
|
Linus Torvalds
|
c0ecb2a9ee |
Merge tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- A large refactoring for the Renesas RZV2H driver to add new interrupt
types cleanly
- A large refactoring for the Renesas RZG2L driver to add support the
new RZ/G3L variant
- Add support for the new NXP S32N79 chip in the IMX irq-steer driver
- Add support for the Apple AICv3 variant
- Enhance the Loongson PCH LPC driver so it can be used on MIPS with
device tree firmware
- Allow the PIC32 EVIC driver to be built independent of MIPS in
compile tests
- The usual small fixes and enhancements all over the place
* tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqchip/irq-pic32-evic: Add __maybe_unused for board_bind_eic_interrupt in COMPILE_TEST
irqchip/renesas-rzv2h: Kill icu_err string
irqchip/renesas-rzv2h: Kill swint_names[]
irqchip/renesas-rzv2h: Kill swint_idx[]
irqchip/renesas-rzg2l: Add NMI support
irqchip/renesas-rzg2l: Clear the shared interrupt bit in rzg2l_irqc_free()
irqchip/renesas-rzg2l: Replace raw_spin_{lock,unlock} with guard() in rzg2l_irq_set_type()
irqchip/gic-v3: Print a warning for out-of-range interrupt numbers
irqchip/renesas-rzg2l: Add shared interrupt support
irqchip/renesas-rzg2l: Add RZ/G3L support
irqchip/renesas-rzg2l: Drop IRQC_IRQ_COUNT macro
irqchip/renesas-rzg2l: Drop IRQC_TINT_START macro
irqchip/renesas-rzg2l: Drop IRQC_NUM_IRQ macro
irqchip/renesas-rzg2l: Dynamically allocate fwspec array
irqchip/renesas-rzg2l: Split rzfive_irqc_{mask,unmask} into separate IRQ and TINT handlers
irqchip/renesas-rzg2l: Split rzfive_tint_irq_endisable() into separate IRQ and TINT helpers
irqchip/renesas-rzg2l: Replace rzg2l_irqc_irq_{enable,disable} with TINT-specific handlers
irqchip/renesas-rzg2l: Split set_type handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Split EOI handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Replace single irq_chip with per-region irq_chip instances
...
|
||
|
Linus Torvalds
|
db23954eea |
Merge tag 'irq-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq updates from Thomas Gleixner: - Invoke add_interrupt_randomness() in handle_percpu_devid_irq() and cleanup the workaround in the Hyper-V driver, which would now invoke it twice on ARM64. Removing it from the driver requires to add it to the x86 system vector entry point - Remove the pointles cpu_read_lock() around reading CPU possible mask, which is read only after init - Add documentation for the interaction between device tree bindings and the interrupt type defines in irq.h - Delete stale defines in the matrix allocator and the equivalent in loongarch * tag 'irq-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Drivers: hv: Move add_interrupt_randomness() to hypervisor callback sysvec genirq/chip: Invoke add_interrupt_randomness() in handle_percpu_devid_irq() genirq/affinity: Remove cpus_read_lock() while reading cpu_possible_mask genirq/matrix, LoongArch: Delete IRQ_MATRIX_BITS leftovers genirq: Document interaction between <linux/irq.h> and DT binding defines |
||
|
Linus Torvalds
|
2ad332b0e2 |
Merge tag 'core-debugobjects-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects update from Thomas Gleixner: "A trivial update for debugobjects to drop a pointless likely() around IS_ERR_OR_NULL()" * tag 'core-debugobjects-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Drop likely() around !IS_ERR_OR_NULL() |