The Arm Komeda (aka Mali-D71) is a display controller that scans out a
framebuffer and hands a signal to a digital encoder to generate a DVI
or HDMI signal. It supports up to two pipelines, each frame can be
composed of up to four layers.
Convert the existing DT binding to DT schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-12-andre.przywara@arm.com
The Arm PL110 and PL111 are IP blocks that provide a display engine with
an LCD interface, being able to drive a variety of LC panels.
Convert the binding over to DT schema, to the DTs can be automatically
checked.
This still contains the deprecated "arm,pl11x,tft-r0g0b0-pads" property,
because this is used by several DTs in the tree.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[robh: make interrupts optional (not connected on Realview EB)]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-9-andre.przywara@arm.com
The Arm Versatile Express system features a bridge device that provides
access to various smaller devices like clocks, reset gates and various
sensors.
Extract the second half of the informal vexpress-sysreg.txt binding and
make it proper DT schema compliant. This makes the old .txt binding
redundant, so remove it.
This describes both the actual parent configuration bridge, as well as
all the possible children devices.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-8-andre.przywara@arm.com
The Arm SP810 IP is a "system controller", providing clocks, timer and a
watchdog.
Convert the DT binding to DT schema, to allow automatic validation.
The existing .txt binding described all properties as required, but the
assigned-clock* and clock-output-names are actually not (from a hardware
perspective). The only existing driver I could find (in Linux) doesn't
require them either, so drop those properties from the "required" list.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-4-andre.przywara@arm.com
The Page Request Interface (PRI) is an optional PCIe feature. As such, a
SMMU would not need to handle it if the PCIe host bridge or the SMMU
itself do not implement it. Also an SMMU could be connected to a platform
device, without any PRI functionality whatsoever.
In all cases there would be no SMMU PRI queue interrupt to be wired up
to an interrupt controller.
At the moment, with the "eventq,gerror,priq,cmdq-sync" order, we
would need to sacrifice the command queue sync interrupt as well, which
might not be desired.
Relax the binding to allow specifying certain useful combinations of
wired interrupts, for instance just the "gerror" interrupt, or omitting
both "pri" and "cmdq-sync".
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-2-andre.przywara@arm.com
GENI(generic interface) based Qualcomm Universal Peripheral controller
can support multiple serial interfaces like SPI,UART and I2C.
Unlike other I2C controllers, QUP I2C bindings are present in parent
schema. Move it out from parent to an individual binding and let parent
refer to child schema later on.
Please note, current schema isn't complete as it misses out few
properties and thus, add these missing properties along the process.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220404182938.29492-2-singh.kuldeep87k@gmail.com
New unittests for overlay notifiers reveal a memory leak in
of_overlay_apply() when a notifier returns an error for action
OF_OVERLAY_POST_APPLY. The pr_err() message is:
OF: ERROR: memory leak, expected refcount 1 instead of 3,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /testcase-data/overlay-node/test-bus/test-unittest17
Change the error path to no longer call free_overlay_changeset(),
and document that the caller of of_overlay_fdt_apply() may choose
to remove the overlay.
Update the unittest that triggered the error to expect the changed
return values and to call of_overlay_remove().
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502181742.1402826-4-frowand.list@gmail.com
Add tests for overlay apply and remove notifiers. Trigger errors
for each of the notifier actions.
These tests will reveal a memory leak problem when a notifier returns
an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is:
OF: ERROR: memory leak, expected refcount 1 instead of 3,
of_node_get()/of_node_put() unbalanced - destroy cset entry: attach
overlay node /testcase-data/overlay-node/test-bus/test-unittest17
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502181742.1402826-3-frowand.list@gmail.com
The values of enum of_overlay_notify_action are used to index into
array of_overlay_action_name. Add an entry to of_overlay_action_name
for the value recently added to of_overlay_notify_action.
Array of_overlay_action_name[] is moved into include/linux/of.h
adjacent to enum of_overlay_notify_action to make the connection
between the two more obvious if either is modified in the future.
The only use of of_overlay_action_name is for error reporting in
overlay_notify(). All callers of overlay_notify() report the same
error, but with fewer details. Remove the redundant error reports
in the callers.
Fixes: 067c098766 ("of: overlay: rework overlay apply and remove kfree()s")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220502181742.1402826-2-frowand.list@gmail.com
The samsung,s524ad0xd1 compatible is in use, but not documented. According
to arch/arm/mach-s3c/mach-smdk6410.c, the samsung,s524ad0xd1 is compatible
with the 24c128. As the schema requires a fallback compatible to the
corresponding Atmel compatible, 'atmel,24c128' is added as a fallback.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220426175938.2262966-1-robh@kernel.org
Convert the fsl,layerscape-scfg binding to the new YAML format.
In the device trees, the device node always have a "syscon"
compatible, which wasn't mentioned in the previous binding.
Also added, compared to the original binding, is the
interrupt-controller subnode as used in arch/arm/boot/dts/ls1021a.dtsi
as well as the litte-endian and big-endian properties.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220427075338.1156449-5-michael@walle.cc
Convert the fsl,ls-extirq binding to the new YAML format.
In contrast to the original binding documentation, there are three
compatibles which are used in their corresponding device trees which
have a specific compatible and the (already documented) fallback
compatible:
- "fsl,ls1046a-extirq", "fsl,ls1043a-extirq"
- "fsl,ls2080a-extirq", "fsl,ls1088a-extirq"
- "fsl,lx2160a-extirq", "fsl,ls1088a-extirq"
Depending on the number of the number of the external IRQs which is
usually 12 except for the LS1021A where there are only 6, the
interrupt-map-mask was reduced from 0xffffffff to 0xf and 0x7
respectively and the number of interrupt-map entries have to
match.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220427075338.1156449-4-michael@walle.cc
Convert infracfg bindings to DT schema format. Not all drivers
currently implement resets, so #reset-cells is made a required
property only for those that do. Using power-controller in the
example node name makes #power-domain-cells required causing
a dt_binding_check error. To solve this, the node is renamed to
syscon@10001000.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220424084647.76577-4-y.oudjana@protonmail.com
Convert apmixedsys bindings to DT schema format. MT2701, MT7623 and
MT7629 device trees currently have the syscon compatible without
it being mentioned in the old DT bindings file which introduces
dtbs_check errors when converting to DT schema as-is, so
mediatek,mt2701-apmixedsys and mediatek,mt7629-apmixedsys are placed
in the last items list with the syscon compatible, and syscon is
added to the mediatek,mt7623-apmixedsys list.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220424084647.76577-3-y.oudjana@protonmail.com
Convert topckgen bindings to DT schema format. MT2701, MT7623 and
MT7629 device trees currently have the syscon compatible without
it being mentioned in the old DT bindings file which introduces
dtbs_check errors when converting to DT schema as-is, so
mediatek,mt2701-topckgen and mediatek,mt7629-topckgen are placed
in the last items list with the syscon compatible, and syscon is
added to the mediatek,mt7623-topckgen list.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220424084647.76577-2-y.oudjana@protonmail.com
Let's update the TI timer binding to use yaml. As this binding is specific
to the TI dual-mode timers also known as dm-timers, let's use file name
ti,timer-dm.yaml to avoid confusion with other timers.
We add checks for the deprecated ti,hwmods property as done for other TI
device driver bindings earlier.
We also correct the issue with the old binding that was out of date for
several properties.
The am43 related timers are undocumented, but compatible with the am3
timers. Let's add the am43 timers too.
The dm814 and dm816 timers are missing, let's add them.
Some timers on some SoCs are dual mapped, like the ABE timers on omap4
and 5. The reg property maxItems must be updated to 2.
The timer clocks can be managed by the parent interconnect target module
with no clocks assigned for the timer node. And in some cases, the SoC may
need to configure additional system clock for the timer in addition to the
functional clock.
The clock names are optional and not specific to the comptible property.
For example, dra7 timers on l3 interconnect do not need clock-names, while
the timers on dra7 l4 interconnect need them with both being compatible
with ti,omap5430-timer.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220414085807.7389-2-tony@atomide.com
Convert the fsl,layerscape-dcfg binding to the new YAML format.
In the device trees, the device node always have a "syscon"
compatible, which wasn't mentioned in the previous binding.
One thing added here, compared to the original binding is the clock
controller subnode of the LS1028A SoC and its "simple-mfd" compatible as
used in arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi as well as the
little-endian and big-endian properties.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425140433.33936-1-michael@walle.cc
Fix various kfree() issues related to of_overlay_apply().
- Double kfree() of fdt and tree when init_overlay_changeset()
returns an error.
- free_overlay_changeset() free the root of the unflattened
overlay (variable tree) instead of the memory that contains
the unflattened overlay.
- For the case of a failure during applying an overlay, move kfree()
of new_fdt and overlay_mem into free_overlay_changeset(), which
is called by the function that allocated them.
- For the case of removing an overlay, the kfree() of new_fdt and
overlay_mem remains in free_overlay_changeset().
- Check return value of of_fdt_unflatten_tree() for error instead
of checking the returned value of overlay_root.
- When storing pointers to allocated objects in ovcs, do so as
near to the allocation as possible instead of in deeply layered
function.
More clearly document policy related to lifetime of pointers into
overlay memory.
Double kfree()
Reported-by: Slawomir Stepien <slawomir.stepien@nokia.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420222505.928492-3-frowand.list@gmail.com
Variables change name across function calls when there is not a good
reason to do so. Fix by changing "fdt" to "new_fdt" and "tree" to
"overlay_root".
The name disparity was confusing when creating the following commit.
The name changes are in this separate commit to make review of the
following commmit less complex.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420222505.928492-2-frowand.list@gmail.com
We should not break overlay notifications on NOTIFY_{OK|STOP}
otherwise we might break on the first fragment. We should only stop
notifications if a *real* errno is returned by one of the listeners.
Fixes: a1d19bd4cf ("of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220420130205.89435-1-nuno.sa@analog.com
When the length of the string is zero of_property_read_string should
return -ENODATA according to the description of the function.
However, of_property_read_string doesn't check prop->length. If
prop->length is zero, return -ENODATA.
Without this patch the following command in u-boot:
fdt set /chosen/node property-name
results in of_property_read_string returning -EILSEQ when attempting to
read property-name. With this patch, it returns -ENODATA as expected.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220416003028.1315268-1-sstabellini@kernel.org
Add documentation for the ti,set-io-isolation DT property on the wkup_m3_ipc
node which tells the wkup_m3_ipc driver to use the wkup_m3 to enable
IO Isolation during low power mode transitions on am43xx platforms.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[dfustini: convert to YAML, make DTS example that passes check]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220414192722.2978837-2-dfustini@baylibre.com
