Pull bcachefs fixes from Kent Overstreet:
- Fix a compatibility issue: we shouldn't be setting incompat feature
bits unless explicitly requested
- Fix another bug where the journal alloc/resize path could spuriously
fail with -BCH_ERR_open_buckets_empty
- Copygc shouldn't run on read-only devices: fragmentation isn't an
issue if we're not currently writing to a given device, and it may
not have anywhere to move the data to
* tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs:
bcachefs: copygc now skips non-rw devices
bcachefs: Fix bch2_dev_journal_alloc() spuriously failing
bcachefs: Don't set BCH_FEATURE_incompat_version_field unless requested
There's no point in doing copygc on non-rw devices: the fragmentation
doesn't matter if we're not writing to them, and we may not have
anywhere to put the data on our other devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we fixed journal resize spuriousl failing with
-BCH_ERR_open_buckets_empty, but initial journal allocation was missed
because it didn't invoke the "block on allocator" loop at all.
Factor out the "loop on allocator" code to fix that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - new code bugs:
- wifi: nl80211: disable multi-link reconfiguration
Previous releases - regressions:
- gso: fix ownership in __udp_gso_segment
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
Pull smb fixes from Steve French:
"Five SMB server fixes, two related client fixes, and minor MAINTAINERS
update:
- Two SMB3 lock fixes fixes (including use after free and bug on fix)
- Fix to race condition that can happen in processing IPC responses
- Four ACL related fixes: one related to endianness of num_aces, and
two related fixes to the checks for num_aces (for both client and
server), and one fixing missing check for num_subauths which can
cause memory corruption
- And minor update to email addresses in MAINTAINERS file"
* tag 'v6.14-rc5-smb3-fixes' of git://git.samba.org/ksmbd:
cifs: fix incorrect validation for num_aces field of smb_acl
ksmbd: fix incorrect validation for num_aces field of smb_acl
smb: common: change the data type of num_aces to le16
ksmbd: fix bug on trap in smb2_lock
ksmbd: fix use-after-free in smb2_lock
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
ksmbd: fix out-of-bounds in parse_sec_desc()
MAINTAINERS: update email address in cifs and ksmbd entry
Pull exfat fixes from Namjae Jeon:
- Optimize new cluster allocation by correctly find empty entry slot
- Add a check to prevent excessive bitmap clearing due to invalid
data size of file/dir entry
- Fix incorrect error return for zero-byte writes
* tag 'exfat-for-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add a check for invalid data size
exfat: short-circuit zero-byte writes in exfat_file_write_iter
exfat: fix soft lockup in exfat_clear_bitmap
exfat: fix just enough dentries but allocate a new cluster to dir
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
This was another case that Rasmus pointed out where the direct access to
the pipe head and tail pointers broke on 32-bit configurations due to
the type changes.
As with the pipe FIONREAD case, fix it by using the appropriate helper
functions that deal with the right pipe index sizing.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/878qpi5wz4.fsf@prevas.dk/
Fixes: 3d252160b8 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg >
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rasmus points out that we do indeed have other cases of breakage from
the type changes that were introduced on 32-bit targets in order to read
the pipe head and tail values atomically (commit 3d252160b8: "fs/pipe:
Read pipe->{head,tail} atomically outside pipe->mutex").
Fix it up by using the proper helper functions that now deal with the
pipe buffer index types properly. This makes the code simpler and more
obvious.
The compiler does the CSE and loop hoisting of the pipe ring size
masking that we used to do manually, so open-coding this was never a
good idea.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/87cyeu5zgk.fsf@prevas.dk/
Fixes: 3d252160b8 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is already difficult for users to troubleshoot which of multiple pid
limits restricts their workload. The per-(hierarchical-)NS pid_max would
contribute to the confusion.
Also, the implementation copies the limit upon creation from
parent, this pattern showed cumbersome with some attributes in legacy
cgroup controllers -- it's subject to race condition between parent's
limit modification and children creation and once copied it must be
changed in the descendant.
Let's do what other places do (ucounts or cgroup limits) -- create new
pid namespaces without any limit at all. The global limit (actually any
ancestor's limit) is still effectively in place, we avoid the
set/unshare race and bumps of global (ancestral) limit have the desired
effect on pid namespace that do not care.
Link: https://lore.kernel.org/r/20240408145819.8787-1-mkoutny@suse.com/
Link: https://lore.kernel.org/r/20250221170249.890014-1-mkoutny@suse.com/
Fixes: 7863dcc72d ("pid: allow pid_max to be set per pid namespace")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250305145849.55491-1-mkoutny@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
On MMIO devices (e.g. MT7988 or EN7581) unicast traffic received on lanX
port is flooded on all other user ports if the DSA switch is configured
without VLAN support since PORT_MATRIX in PCR regs contains all user
ports. Similar to MDIO devices (e.g. MT7530 and MT7531) fix the issue
defining default VLAN-ID 0 for MT7530 MMIO devices.
Fixes: 110c18bfed ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20250304-mt7988-flooding-fix-v1-1-905523ae83e9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While looking for incorrect users of the pipe head/tail fields (see
commit c27c66afc4: "fs/pipe: Fix pipe_occupancy() with 16-bit
indexes"), I found a bug in pipe_discard_from() that looked entirely
broken.
However, the fix is trivial: this buggy function isn't actually called
by anything, so let's just remove it ASAP.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When I read through the TSO codes, I found out that we probably
miss initializing the tx_flags of last seg when TSO is turned
off, which means at the following points no more timestamp
(for this last one) will be generated. There are three flags
to be handled in this patch:
1. SKBTX_HW_TSTAMP
2. SKBTX_BPF
3. SKBTX_SCHED_TSTAMP
Note that SKBTX_BPF[1] was added in 6.14.0-rc2 by commit
6b98ec7e88 ("bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback")
and only belongs to net-next branch material for now. The common
issue of the above three flags can be fixed by this single patch.
This patch initializes the tx_flags to SKBTX_ANY_TSTAMP like what
the UDP GSO does to make the newly segmented last skb inherit the
tx_flags so that requested timestamp will be generated in each
certain layer, or else that last one has zero value of tx_flags
which leads to no timestamp at all.
Fixes: 4ed2d765df ("net-timestamp: TCP timestamping")
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a check for invalid data size to avoid corrupted filesystem
from being further corrupted.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When generic_write_checks() returns zero, it means that
iov_iter_count() is zero, and there is no work to do.
Simply return success like all other filesystems do, rather than
proceeding down the write path, which today yields an -EFAULT in
generic_perform_write() via the
(fault_in_iov_iter_readable(i, bytes) == bytes) check when bytes
== 0.
Fixes: 11a347fb6c ("exfat: change to get file size from DataLength")
Reported-by: Noah <kernel-org-10@maxgrass.eu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
bitmap clear loop will take long time in __exfat_free_cluster()
if data size of file/dir enty is invalid.
If cluster bit in bitmap is already clear, stop clearing bitmap go to
out of loop.
Fixes: 31023864e6 ("exfat: add fat entry operations")
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This commit fixes the condition for allocating cluster to parent
directory to avoid allocating new cluster to parent directory when
there are just enough empty directory entries at the end of the
parent directory.
Fixes: af02c72d0b ("exfat: convert exfat_find_empty_entry() to use dentry cache")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Pull AMD microcode loading fixes from Borislav Petkov:
- Load only sha256-signed microcode patch blobs
- Other good cleanups
* tag 'x86_microcode_for_v6.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Load only SHA256-checksummed patches
x86/microcode/AMD: Add get_patch_level()
x86/microcode/AMD: Get rid of the _load_microcode_amd() forward declaration
x86/microcode/AMD: Merge early_apply_microcode() into its single callsite
x86/microcode/AMD: Remove unused save_microcode_in_initrd_amd() declarations
x86/microcode/AMD: Remove ugly linebreak in __verify_patch_section() signature
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization.
Fixes: 22bedad3ce ("net: convert multicast list to list_head")
Reported-by: syzbot+91161fe81857b396c8a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If multiple connection requests attempt to create an implicit mptcp
endpoint in parallel, more than one caller may end up in
mptcp_pm_nl_append_new_local_addr because none found the address in
local_addr_list during their call to mptcp_pm_nl_get_local_id. In this
case, the concurrent new_local_addr calls may delete the address entry
created by the previous caller. These deletes use synchronize_rcu, but
this is not permitted in some of the contexts where this function may be
called. During packet recv, the caller may be in a rcu read critical
section and have preemption disabled.
An example stack:
BUG: scheduling while atomic: swapper/2/0/0x00000302
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
dump_stack (lib/dump_stack.c:124)
__schedule_bug (kernel/sched/core.c:5943)
schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33 kernel/sched/core.c:5970)
__schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207 kernel/sched/features.h:29 kernel/sched/core.c:6621)
schedule (arch/x86/include/asm/preempt.h:84 kernel/sched/core.c:6804 kernel/sched/core.c:6818)
schedule_timeout (kernel/time/timer.c:2160)
wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116 kernel/sched/completion.c:127 kernel/sched/completion.c:148)
__wait_rcu_gp (include/linux/rcupdate.h:311 kernel/rcu/update.c:444)
synchronize_rcu (kernel/rcu/tree.c:3609)
mptcp_pm_nl_append_new_local_addr (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061)
mptcp_pm_nl_get_local_id (net/mptcp/pm_netlink.c:1164)
mptcp_pm_get_local_id (net/mptcp/pm.c:420)
subflow_check_req (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213)
subflow_v4_route_req (net/mptcp/subflow.c:305)
tcp_conn_request (net/ipv4/tcp_input.c:7216)
subflow_v4_conn_request (net/mptcp/subflow.c:651)
tcp_rcv_state_process (net/ipv4/tcp_input.c:6709)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2334)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))
ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234)
ip_local_deliver (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)
ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580)
ip_sublist_rcv (net/ipv4/ip_input.c:640)
ip_list_rcv (net/ipv4/ip_input.c:675)
__netif_receive_skb_list_core (net/core/dev.c:5583 net/core/dev.c:5631)
netif_receive_skb_list_internal (net/core/dev.c:5685 net/core/dev.c:5774)
napi_complete_done (include/linux/list.h:37 include/net/gro.h:449 include/net/gro.h:444 net/core/dev.c:6114)
igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
__napi_poll (net/core/dev.c:6582)
net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787)
handle_softirqs (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)
irq_exit_rcu (kernel/softirq.c:651)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
</IRQ>
This problem seems particularly prevalent if the user advertises an
endpoint that has a different external vs internal address. In the case
where the external address is advertised and multiple connections
already exist, multiple subflow SYNs arrive in parallel which tends to
trigger the race during creation of the first local_addr_list entries
which have the internal address instead.
Fix by skipping the replacement of an existing implicit local address if
called via mptcp_pm_nl_get_local_id.
Fixes: d045b9eb95 ("mptcp: introduce implicit endpoints")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250303-net-mptcp-fix-sched-while-atomic-v1-1-f6a216c5a74c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a netdev's
topology.
It takes as a parameter a const struct nlattr *header that's used for
error handling :
if (!phydev) {
NL_SET_ERR_MSG_ATTR(extack, header,
"no phy matching phyindex");
return ERR_PTR(-ENODEV);
}
In the notify path after a ->set operation however, there's no request
attributes available.
The typical callsite for the above function looks like:
phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER],
info->extack);
So, when tb is NULL (such as in the ethnl notify path), we have a nice
crash.
It turns out that there's only the PLCA command that is in that case, as
the other phydev-specific commands don't have a notification.
This commit fixes the crash by passing the cmd index and the nlattr
array separately, allowing NULL-checking it directly inside the helper.
Fixes: c15e065b46 ("net: ethtool: Allow passing a phy index for some commands")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reported-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20250301141114.97204-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the
ppp driver not initializing a 2-byte header when using socket filter.
The following code can generate a PPP filter BPF program:
'''
struct bpf_program fp;
pcap_t *handle;
handle = pcap_open_dead(DLT_PPP_PPPD, 65535);
pcap_compile(handle, &fp, "ip and outbound", 0, 0);
bpf_dump(&fp, 1);
'''
Its output is:
'''
(000) ldh [2]
(001) jeq #0x21 jt 2 jf 5
(002) ldb [0]
(003) jeq #0x1 jt 4 jf 5
(004) ret #65535
(005) ret #0
'''
Wen can find similar code at the following link:
https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680
The maintainer of this code repository is also the original maintainer
of the ppp driver.
As you can see the BPF program skips 2 bytes of data and then reads the
'Protocol' field to determine if it's an IP packet. Then it read the first
byte of the first 2 bytes to determine the direction.
The issue is that only the first byte indicating direction is initialized
in current ppp driver code while the second byte is not initialized.
For normal BPF programs generated by libpcap, uninitialized data won't be
used, so it's not a problem. However, for carefully crafted BPF programs,
such as those generated by syzkaller [2], which start reading from offset
0, the uninitialized data will be used and caught by KMSAN.
[1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791
[2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000
Cc: Paul Mackerras <paulus@samba.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luca Weiss says:
====================
Fixes for IPA v4.7
During bringup of IPA v4.7 unfortunately some bits were missed, and it
couldn't be tested much back then due to missing features in tqftpserv
which caused the modem to not enable correctly.
Especially the last commit is important since it makes mobile data
actually functional on SoCs with IPA v4.7 like SM6350 - used on the
Fairphone 4. Before that, you'd get an IP address on the interface but
then e.g. ping never got any response back.
====================
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-0-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During S4 retore flow, quickspi device was resetted by driver and state
was changed to RESETTED. It is needed to be change to ENABLED state
after S4 re-initialization finished, otherwise, device will run in wrong
state and HID input data will be dropped.
Signed-off-by: Even Xu <even.xu@intel.com>
Fixes: 6912aaf3fd ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6e ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pull devicetree fix from Rob Herring:
- Revert reserved-memory 'alignment' property to use '#address-cells'
instead of '#size-cells'. What's in use trumps the spec.
* tag 'devicetree-fixes-for-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "of: reserved-memory: Fix using wrong number of cells to get property 'alignment'"
pipe_readable(), pipe_writable(), and pipe_poll() can read "pipe->head"
and "pipe->tail" outside of "pipe->mutex" critical section. When the
head and the tail are read individually in that order, there is a window
for interruption between the two reads in which both the head and the
tail can be updated by concurrent readers and writers.
One of the problematic scenarios observed with hackbench running
multiple groups on a large server on a particular pipe inode is as
follows:
pipe->head = 36
pipe->tail = 36
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wakes up: pipe not full*
hackbench-118762 [057] ..... 1029.550548: pipe_write: head: 36 -> 37 [tail: 36]
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next reader 118740*
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next writer 118768*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: *writer wakes up*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: head = READ_ONCE(pipe->head) [37]
... CPU 206 interrupted (exact wakeup was not traced but 118768 did read head at 37 in traces)
hackbench-118740 [057] ..... 1029.550558: pipe_read: *reader wakes up: pipe is not empty*
hackbench-118740 [057] ..... 1029.550558: pipe_read: tail: 36 -> 37 [head = 37]
hackbench-118740 [057] ..... 1029.550559: pipe_read: *pipe is empty; wakeup writer 118768*
hackbench-118740 [057] ..... 1029.550559: pipe_read: *sleeps*
hackbench-118766 [185] ..... 1029.550592: pipe_write: *New writer comes in*
hackbench-118766 [185] ..... 1029.550592: pipe_write: head: 37 -> 38 [tail: 37]
hackbench-118766 [185] ..... 1029.550592: pipe_write: *wakes up reader 118766*
hackbench-118740 [185] ..... 1029.550598: pipe_read: *reader wakes up; pipe not empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: tail: 37 -> 38 [head: 38]
hackbench-118740 [185] ..... 1029.550599: pipe_read: *pipe is empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: *reader sleeps; wakeup writer 118768*
... CPU 206 switches back to writer
hackbench-118768 [206] ..... 1029.550601: pipe_write: tail = READ_ONCE(pipe->tail) [38]
hackbench-118768 [206] ..... 1029.550601: pipe_write: pipe_full()? (u32)(37 - 38) >= 16? Yes
hackbench-118768 [206] ..... 1029.550601: pipe_write: *writer goes back to sleep*
[ Tasks 118740 and 118768 can then indefinitely wait on each other. ]
The unsigned arithmetic in pipe_occupancy() wraps around when
"pipe->tail > pipe->head" leading to pipe_full() returning true despite
the pipe being empty.
The case of genuine wraparound of "pipe->head" is handled since pipe
buffer has data allowing readers to make progress until the pipe->tail
wraps too after which the reader will wakeup a sleeping writer, however,
mistaking the pipe to be full when it is in fact empty can lead to
readers and writers waiting on each other indefinitely.
This issue became more problematic and surfaced as a hang in hackbench
after the optimization in commit aaec5a95d5 ("pipe_read: don't wake up
the writer if the pipe is still full") significantly reduced the number
of spurious wakeups of writers that had previously helped mask the
issue.
To avoid missing any updates between the reads of "pipe->head" and
"pipe->write", unionize the two with a single unsigned long
"pipe->head_tail" member that can be loaded atomically.
Using "pipe->head_tail" to read the head and the tail ensures the
lockless checks do not miss any updates to the head or the tail and
since those two are only updated under "pipe->mutex", it ensures that
the head is always ahead of, or equal to the tail resulting in correct
calculations.
[ prateek: commit log, testing on x86 platforms. ]
Reported-and-debugged-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Closes: https://lore.kernel.org/lkml/e813814e-7094-4673-bc69-731af065a0eb@amd.com/
Reported-by: Alexey Gladkov <legion@kernel.org>
Closes: https://lore.kernel.org/all/Z8Wn0nTvevLRG_4m@example.org/
Fixes: 8cefc107ca ("pipe: Use head and tail pointers for the ring, not cursor and length")
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Berg says:
====================
bugfixes for 6.14:
* regressions from this cycle:
- mac80211: fix sparse warning for monitor
- nl80211: disable multi-link reconfiguration (needs fixing)
* older issues:
- cfg80211: reject badly combined cooked monitor,
fix regulatory hint validity checks
- mac80211: handle TXQ flush w/o driver per-sta flush,
fix debugfs for monitor, fix element inheritance
- iwlwifi: fix rfkill, dead firmware handling, rate API
version, free A-MSDU handling, avoid large
allocations, fix string format
- brcmfmac: fix power handling on some boards
* tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: disable multi-link reconfiguration
wifi: cfg80211: regulatory: improve invalid hints checking
wifi: brcmfmac: keep power during suspend if board requires it
wifi: mac80211: Fix sparse warning for monitor_sdata
wifi: mac80211: fix vendor-specific inheritance
wifi: mac80211: fix MLE non-inheritance parsing
wifi: iwlwifi: Fix A-MSDU TSO preparation
wifi: iwlwifi: Free pages allocated when failing to build A-MSDU
wifi: iwlwifi: limit printed string from FW file
wifi: iwlwifi: mvm: use the right version of the rate API
wifi: iwlwifi: mvm: don't try to talk to a dead firmware
wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend
wifi: iwlwifi: mvm: clean up ROC on failure
wifi: iwlwifi: fw: avoid using an uninitialized variable
wifi: iwlwifi: fw: allocate chained SG tables for dump
wifi: mac80211: remove debugfs dir for virtual monitor
wifi: mac80211: Cleanup sta TXQs on flush
wifi: nl80211: reject cooked mode if it is set along with other flags
====================
Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull affs fixes from David Sterba:
"Two fixes from Simon Tatham. They're real bugfixes for problems with
OFS floppy disks created on linux and then read in the emulated
Workbench environment"
* tag 'affs-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: don't write overlarge OFS data block size fields
affs: generate OFS sequence numbers starting at 1
Pull xfs cleanups from Carlos Maiolino:
"Just a few cleanups"
* tag 'xfs-fixes-6.14-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove the XBF_STALE check from xfs_buf_rele_cached
xfs: remove most in-flight buffer accounting
xfs: decouple buffer readahead from the normal buffer read path
xfs: reduce context switches for synchronous buffered I/O
