Ido Schimmel says:
====================
nexthop: Various fixes
Patch #1 fixes a NPD that was recently reported by syzbot.
Patch #2 fixes an issue in the existing FIB nexthop selftest.
Patch #3 extends the selftest with test cases for the bug that was fixed
in the first patch.
====================
Link: https://patch.msgid.link/20250921150824.149157-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following test cases for both IPv4 and IPv6:
* Can change from FDB nexthop to non-FDB nexthop and vice versa.
* Can change FDB nexthop address while in a group.
* Cannot change from FDB nexthop to non-FDB nexthop and vice versa while
in a group.
Output without "nexthop: Forbid FDB status change while nexthop is in a
group":
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal"
IPv6 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [FAIL]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [FAIL]
[...]
IPv4 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [FAIL]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [FAIL]
[...]
Tests passed: 36
Tests failed: 4
Tests skipped: 0
Output with "nexthop: Forbid FDB status change while nexthop is in a
group":
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal"
IPv6 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [ OK ]
[...]
Tests passed: 40
Tests failed: 0
Tests skipped: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test creates non-FDB nexthops without a nexthop device which leads
to the expected failure, but for the wrong reason:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 63 via 2001:db8:91::4
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 64 via 2001:db8:91::5
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 63/64 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 14 via 172.16.1.2
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 15 via 172.16.1.3
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 14/15 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-nRsN3E nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 104 group 14/15
Error: Invalid nexthop id.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-0dlhyd ro add 172.16.0.0/22 nhid 15
Error: Nexthop id does not exist.
TEST: Route add with fdb nexthop [ OK ]
In addition, as can be seen in the above output, a couple of IPv4 test
cases used the non-FDB nexthops (14 and 15) when they intended to use
the FDB nexthops (16 and 17). These test cases only passed because
failure was expected, but they failed for the wrong reason.
Fix the test to create the non-FDB nexthops with a nexthop device and
adjust the IPv4 test cases to use the FDB nexthops instead of the
non-FDB nexthops.
Output after the fix:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 63 via 2001:db8:91::4 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 64 via 2001:db8:91::5 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 63/64 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 14 via 172.16.1.2 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 15 via 172.16.1.3 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 14/15 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-lNzfHP nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 104 group 16/17
Error: Non FDB nexthop group cannot have fdb nexthops.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-lNzfHP ro add 172.16.0.0/22 nhid 16
Error: Route cannot point to a fdb nexthop.
TEST: Route add with fdb nexthop [ OK ]
[...]
Tests passed: 30
Tests failed: 0
Tests skipped: 0
Fixes: 0534c5489c ("selftests: net: add fdb nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel forbids the creation of non-FDB nexthop groups with FDB
nexthops:
# ip nexthop add id 1 via 192.0.2.1 fdb
# ip nexthop add id 2 group 1
Error: Non FDB nexthop group cannot have fdb nexthops.
And vice versa:
# ip nexthop add id 3 via 192.0.2.2 dev dummy1
# ip nexthop add id 4 group 3 fdb
Error: FDB nexthop group can only have fdb nexthops.
However, as long as no routes are pointing to a non-FDB nexthop group,
the kernel allows changing the type of a nexthop from FDB to non-FDB and
vice versa:
# ip nexthop add id 5 via 192.0.2.2 dev dummy1
# ip nexthop add id 6 group 5
# ip nexthop replace id 5 via 192.0.2.2 fdb
# echo $?
0
This configuration is invalid and can result in a NPD [1] since FDB
nexthops are not associated with a nexthop device:
# ip route add 198.51.100.1/32 nhid 6
# ping 198.51.100.1
Fix by preventing nexthop FDB status change while the nexthop is in a
group:
# ip nexthop add id 7 via 192.0.2.2 dev dummy1
# ip nexthop add id 8 group 7
# ip nexthop replace id 7 via 192.0.2.2 fdb
Error: Cannot change nexthop FDB status while in a group.
[1]
BUG: kernel NULL pointer dereference, address: 00000000000003c0
[...]
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:fib_lookup_good_nhc+0x1e/0x80
[...]
Call Trace:
<TASK>
fib_table_lookup+0x541/0x650
ip_route_output_key_hash_rcu+0x2ea/0x970
ip_route_output_key_hash+0x55/0x80
__ip4_datagram_connect+0x250/0x330
udp_connect+0x2b/0x60
__sys_connect+0x9c/0xd0
__x64_sys_connect+0x18/0x20
do_syscall_64+0xa4/0x2a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 38428d6871 ("nexthop: support for fdb ecmp nexthops")
Reported-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c9a4d2.050a0220.3c6139.0e63.GAE@google.com/
Tested-by: syzbot+6596516dd2b635ba2350@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, alloc_skb_with_frags() will only fill (MAX_SKB_FRAGS - 1)
slots. I think it should use all MAX_SKB_FRAGS slots, as callers of
alloc_skb_with_frags() will size their allocation of frags based
on MAX_SKB_FRAGS.
This issue was discovered via a test patch that sets 'order' to 0
in alloc_skb_with_frags(), which effectively tests/simulates high
fragmentation. In this case sendmsg() on unix sockets will fail every
time for large allocations. If the PAGE_SIZE is 4K, then data_len will
request 68K or 17 pages, but alloc_skb_with_frags() can only allocate
64K in this case or 16 pages.
Fixes: 09c2c90705 ("net: allow alloc_skb_with_frags() to allocate bigger packets")
Signed-off-by: Jason Baron <jbaron@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250922191957.2855612-1-jbaron@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2025-09-23
The 1st patch is by Chen Yufeng and fixes a potential NULL pointer
deref in the hi311x driver.
Duy Nguyen contributes a patch for the rcar_canfd driver to fix the
controller mode setting.
The next 4 patches are by Vincent Mailhol and populate the
ndo_change_mtu(( callback in the etas_es58x, hi311x, sun4i_can and
mcba_usb driver to prevent buffer overflows.
Stéphane Grosjean's patch for the peak_usb driver fixes a
shift-out-of-bounds issue.
* tag 'linux-can-fixes-for-6.17-20250923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix shift-out-of-bounds issue
can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow
can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
can: hi311x: populate ndo_change_mtu() to prevent buffer overflow
can: etas_es58x: populate ndo_change_mtu() to prevent buffer overflow
can: rcar_canfd: Fix controller mode setting
can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled
====================
Link: https://patch.msgid.link/20250923073427.493034-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6
destination values to the source address field (saddr) when
processing pedit offsets within the destination address range.
This patch corrects the assignment to use daddr instead of saddr,
ensuring that pedit operations on IPv6 destination addresses are
applied correctly.
Fixes: 9b9eb518e3 ("bnxt_en: Add support for NAT(L3/L4 rewrite)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2025-09-22
1) Fix 0 assignment for SPIs. 0 is not a valid SPI,
it means no SPI assigned.
2) Fix offloading for inter address family tunnels.
* tag 'ipsec-2025-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix offloading of cross-family tunnels
xfrm: xfrm_alloc_spi shouldn't use 0 as SPI
====================
Link: https://patch.msgid.link/20250922073512.62703-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
i40e: virtchnl improvements
Przemek Kitszel says:
Improvements hardening PF-VF communication for i40e driver.
This patchset targets several issues that can cause undefined behavior
or be exploited in some other way.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: improve VF MAC filters accounting
i40e: add mask to apply valid bits for itr_idx
i40e: add max boundary check for VF filters
i40e: fix validation of VF state in get resources
i40e: fix input validation logic for action_meta
i40e: fix idx validation in config queues msg
i40e: fix idx validation in i40e_validate_queue_map
i40e: add validation for ring_len param
====================
Link: https://patch.msgid.link/20250919184959.656681-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
broadcom: report the supported flags for ancillary features
James Clark reported off list that the broadcom PHY PTP driver was
incorrectly handling PTP_EXTTS_REQUEST and PTP_PEROUT_REQUEST ioctls since
the conversion to the .supported_*_flags fields. This series fixes the
driver to correctly report its flags through the .supported_perout_flags
and .supported_extts_flags fields. It also contains an update to comment
the behavior of the PTP_STRICT_FLAGS being always enabled for
PTP_EXTTS_REQUEST2.
I plan to follow up this series with some improvements to the PTP
documentation better explaining each flag and the expectation of the driver
APIs.
====================
Link: https://patch.msgid.link/20250918-jk-fix-bcm-phy-supported-flags-v1-0-747b60407c9c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6138e687c7 ("ptp: Introduce strict checking of external time stamp
options.") added the PTP_STRICT_FLAGS to the set of flags supported for the
external timestamp request ioctl.
It is only supported by PTP_EXTTS_REQUEST2, as it was introduced the
introduction of the new ioctls. Further, the kernel has always set this
flag for PTP_EXTTS_REQUEST2 regardless of whether or not the user requested
the behavior.
This effectively means that the flag is not useful for userspace. If the
user issues a PTP_EXTTS_REQUEST ioctl, the flag is ignored due to not being
supported on the old ioctl. If the user issues a PTP_EXTTS_REQUEST2 ioctl,
the flag will be set by the kernel regardless of whether the user set the
flag in their structure.
Add a comment documenting this behavior in the uAPI header file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: James Clark <jjc@jclark.com>
Link: https://patch.msgid.link/20250918-jk-fix-bcm-phy-supported-flags-v1-3-747b60407c9c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7c571ac57d ("net: ptp: introduce .supported_extts_flags to
ptp_clock_info") modified the PTP core kernel logic to validate the
supported flags for the PTP_EXTTS_REQUEST ioctls, rather than relying on
each individual driver correctly checking its flags.
The bcm_ptp_enable() function implements support for PTP_CLK_REQ_EXTTS, but
does not check the flags, and does not forward the request structure into
bcm_ptp_extts_locked().
When originally converting the bcm-phy-ptp.c code, it was unclear what
edges the hardware actually timestamped. Thus, no flags were initialized in
the .supported_extts_flags field. This results in the kernel automatically
rejecting all userspace requests for the PTP_EXTTS_REQUEST2 ioctl.
This occurs because the PTP_STRICT_FLAGS is always assumed when operating
under PTP_EXTTS_REQUEST2. This has been the case since the flags
introduction by commit 6138e687c7 ("ptp: Introduce strict checking of
external time stamp options.").
The bcm-phy-ptp.c logic never properly supported strict flag validation,
as it previously ignored all flags including both PTP_STRICT_FLAGS and the
PTP_FALLING_EDGE and PTP_RISING_EDGE flags.
Reports from users in the field prove that the hardware timestamps the
rising edge. Encode this in the .supported_extts_flags field. This
re-enables support for the PTP_EXTTS_REQUEST2 ioctl.
Reported-by: James Clark <jjc@jclark.com>
Fixes: 7c571ac57d ("net: ptp: introduce .supported_extts_flags to ptp_clock_info")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: James Clark <jjc@jclark.com>
Link: https://patch.msgid.link/20250918-jk-fix-bcm-phy-supported-flags-v1-2-747b60407c9c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bcm_ptp_perout_locked() function has support for handling
PTP_PEROUT_DUTY_CYCLE, but its not listed in the supported_perout_flags.
Attempts to use the duty cycle support will be rejected since commit
d9f3e9ecc4 ("net: ptp: introduce .supported_perout_flags to
ptp_clock_info"), as this flag accidentally missed while doing the
conversion.
Drop the unnecessary supported flags check from the bcm_ptp_perout_locked()
function and correctly set the supported_perout_flags. This fixes use of
the PTP_PEROUT_DUTY_CYCLE support for the broadcom driver.
Reported-by: James Clark <jjc@jclark.com>
Fixes: d9f3e9ecc4 ("net: ptp: introduce .supported_perout_flags to ptp_clock_info")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: James Clark <jjc@jclark.com>
Link: https://patch.msgid.link/20250918-jk-fix-bcm-phy-supported-flags-v1-1-747b60407c9c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hci_resume_advertising_sync is suppose to resume all instance paused by
hci_pause_advertising_sync, this logic is used for procedures are only
allowed when not advertising, but instance 0x00 was not being
re-enabled.
Fixes: ad383c2c65 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some Kconfig dependencies are needed after my recent cleanup, since
the core code has its own option.
Since btmtksdio does not actually call h4_recv_buf(), move the
definitions it uses outside the BT_HCIUART_H4 gate in hci_uart.h to
avoid adding a dependency for btmtksdio.
The rest I touched (bpa10x, btmtkuart, and btnxpuart) do really call
h4_recv_buf(), so the dependency is required, add it for them.
Fixes: 0e272fc7e17d ("Bluetooth: remove duplicate h4_recv_buf() in header")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508300413.OnIedvRh-lkp@intel.com/
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Vincent Mailhol <mailhol@kernel.org> says:
Four drivers, namely etas_es58x, hi311x, sun4i_can and mcba_usb forgot
to populate their net_device_ops->ndo_change_mtu(). Because of that,
the user is free to configure any MTU on these interfaces.
This can be abused by an attacker who could craft some skbs and send
them through PF_PACKET to perform a buffer overflow of up to 247 bytes
in each of these drivers.
This series contains four patches, one for each of the drivers, to add
the missing ndo_change_mtu() callback. The descriptions contain
detailed explanations of how the buffer overflow could be triggered.
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-0-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the mcba_usb driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on these lines:
usb_msg.dlc = cf->len;
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 51f3baad7d ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-4-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:
dlc = cf->len;
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-3-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, hi3110_hard_start_xmit() receives a CAN XL frame which it is
not able to correctly handle and will thus misinterpret it as a CAN
frame. The driver will consume frame->len as-is with no further
checks.
This can result in a buffer overflow later on in hi3110_hw_tx() on
this line:
memcpy(buf + HI3110_FIFO_EXT_DATA_OFF,
frame->data, frame->len);
Here, frame->len corresponds to the flags field of the CAN XL frame.
In our previous example, we set canxl_frame->flags to 0xff. Because
the maximum expected length is 8, a buffer overflow of 247 bytes
occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 57e83fb9b7 ("can: hi311x: Add Holt HI-311x CAN driver")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-2-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the etas_es58x driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL));
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, es58x_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN(FD)
frame.
This can result in a buffer overflow. For example, using the es581.4
variant, the frame will be dispatched to es581_4_tx_can_msg(), go
through the last check at the beginning of this function:
if (can_is_canfd_skb(skb))
return -EMSGSIZE;
and reach this line:
memcpy(tx_can_msg->data, cf->data, cf->len);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU or
CANFD_MTU (depending on the device capabilities). By fixing the root
cause, this prevents the buffer overflow.
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-1-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This issue is similar to the vulnerability in the `mcp251x` driver,
which was fixed in commit 03c427147b ("can: mcp251x: fix resume from
sleep before interface was brought up").
In the `hi311x` driver, when the device resumes from sleep, the driver
schedules `priv->restart_work`. However, if the network interface was
not previously enabled, the `priv->wq` (workqueue) is not allocated and
initialized, leading to a null pointer dereference.
To fix this, we move the allocation and initialization of the workqueue
from the `hi3110_open` function to the `hi3110_can_probe` function.
This ensures that the workqueue is properly initialized before it is
used during device resume. And added logic to destroy the workqueue
in the error handling paths of `hi3110_can_probe` and in the
`hi3110_can_remove` function to prevent resource leaks.
Signed-off-by: Chen Yufeng <chenyufeng@iie.ac.cn>
Link: https://patch.msgid.link/20250911150820.250-1-chenyufeng@iie.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When adding new VM MAC, driver checks only *active* filters in
vsi->mac_filter_hash. Each MAC, even in non-active state is using resources.
To determine number of MACs VM uses, count VSI filters in *any* state.
Add i40e_count_all_filters() to simply count all filters, and rename
i40e_count_filters() to i40e_count_active_filters() to avoid ambiguity.
Fixes: cfb1d572c9 ("i40e: Add ensurance of MacVlan resources for every trusted VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ITR index (itr_idx) is only 2 bits wide. When constructing the
register value for QINT_RQCTL, all fields are ORed together. Without
masking, higher bits from itr_idx may overwrite adjacent fields in the
register.
Apply I40E_QINT_RQCTL_ITR_INDX_MASK to ensure only the intended bits are
set.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset.
Fixes: 61125b8be8 ("i40e: Fix failed opcode appearing if handling messages from VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless. No known regressions at this point.
Current release - fix to a fix:
- eth: Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
- wifi: iwlwifi: pcie: fix byte count table for 7000/8000 devices
- net: clear sk->sk_ino in sk_set_socket(sk, NULL), fix CRIU
Previous releases - regressions:
- bonding: set random address only when slaves already exist
- rxrpc: fix untrusted unsigned subtract
- eth:
- ice: fix Rx page leak on multi-buffer frames
- mlx5: don't return mlx5_link_info table when speed is unknown
Previous releases - always broken:
- tls: make sure to abort the stream if headers are bogus
- tcp: fix null-deref when using TCP-AO with TCP_REPAIR
- dpll: fix skipping last entry in clock quality level reporting
- eth: qed: don't collect too many protection override GRC elements,
fix memory corruption"
* tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
cnic: Fix use-after-free bugs in cnic_delete_task
devlink rate: Remove unnecessary 'static' from a couple places
MAINTAINERS: update sundance entry
net: liquidio: fix overflow in octeon_init_instr_queue()
net: clear sk->sk_ino in sk_set_socket(sk, NULL)
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
selftests: tls: test skb copy under mem pressure and OOB
tls: make sure to abort the stream if headers are bogus
selftest: packetdrill: Add tcp_fastopen_server_reset-after-disconnect.pkt.
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
octeon_ep: fix VF MAC address lifecycle handling
selftests: bonding: add vlan over bond testing
bonding: don't set oif to bond dev when getting NS target destination
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
net/mlx5e: Add a miss level for ipsec crypto offload
net/mlx5e: Harden uplink netdev access against device unbind
MAINTAINERS: make the DPLL entry cover drivers
doc/netlink: Fix typos in operation attributes
igc: don't fail igc_probe() on LED setup error
...
Pull kvm fixes from Paolo Bonzini:
"These are mostly Oliver's Arm changes: lock ordering fixes for the
vGIC, and reverts for a buggy attempt to avoid RCU stalls on large
VMs.
Arm:
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly
programming at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding
scenarios where an xarray's spinlock was nested with a *raw*
spinlock
- Permit stage-2 read permission aborts which are possible in the
case of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
- Reverted a couple of fixes for RCU stalls when destroying a stage-2
page table.
There appears to be some nasty refcounting / UAF issues lurking in
those patches and the band-aid we tried to apply didn't hold.
s390:
- mm fixes, including userfaultfd bug fix
x86:
- Sync the vTPR from the local APIC to the VMCB even when AVIC is
active.
This fixes a bug where host updates to the vTPR, e.g. via
KVM_SET_LAPIC or emulation of a guest access, are lost and result
in interrupt delivery issues in the guest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active
Revert "KVM: arm64: Split kvm_pgtable_stage2_destroy()"
Revert "KVM: arm64: Reschedule as needed when destroying the stage-2 page-tables"
KVM: arm64: vgic: fix incorrect spinlock API usage
KVM: arm64: Remove stage 2 read fault check
KVM: arm64: Fix parameter ordering for VBAR_EL1 assignment
KVM: arm64: nv: Fix incorrect VNCR invalidation range calculation
KVM: arm64: vgic-v3: Indicate vgic_put_irq() may take LPI xarray lock
KVM: arm64: vgic-v3: Don't require IRQs be disabled for LPI xarray lock
KVM: arm64: vgic-v3: Erase LPIs from xarray outside of raw spinlocks
KVM: arm64: Spin off release helper from vgic_put_irq()
KVM: arm64: vgic-v3: Use bare refcount for VGIC LPIs
KVM: arm64: vgic: Drop stale comment on IRQ active state
KVM: arm64: VHE: Save and restore host MDCR_EL2 value correctly
KVM: arm64: Initialize PMSCR_EL1 when in VHE
KVM: arm64: nv: fix VNCR TLB ASID match logic for non-Global entries
KVM: s390: Fix FOLL_*/FAULT_FLAG_* confusion
KVM: s390: Fix incorrect usage of mmu_notifier_register()
KVM: s390: Fix access to unavailable adapter indicator pages during postcopy
KVM: arm64: Mark freed S2 MMUs as invalid
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and new HW support:
- amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
- amd/pmf: Support new ACPI ID AMDI0108
- asus-wmi: Re-add extra keys to ignore_key_wlan quirk
- oxpec: Add support for AOKZOE A1X and OneXPlayer X1Pro EVA-02"
* tag 'platform-drivers-x86-v6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Re-add extra keys to ignore_key_wlan quirk
platform/x86/amd/pmf: Support new ACPI ID AMDI0108
platform/x86: oxpec: Add support for AOKZOE A1X
platform/x86: oxpec: Add support for OneXPlayer X1Pro EVA-02
platform/x86/amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list
Pull UML fixes from Johannes Berg:
"A few fixes for UML, which I'd meant to send earlier but then forgot.
All of them are pretty long-standing issues that are either not really
happening (the UAF), in rarely used code (the FD buffer issue), or an
issue only for some host configurations (the executable stack):
- mark stack not executable to work on more modern systems with
selinux
- fix use-after-free in a virtio error path
- fix stack buffer overflow in external unix socket FD receive
function"
* tag 'uml-for-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Fix FD copy size in os_rcv_fd_msg()
um: virtio_uml: Fix use-after-free after put_device in probe
um: Don't mark stack executable
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
This is confirmed by a KASAN report:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800aa09a18 by task bash/136
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
otx2_ptp_init+0xb1/0x860
otx2_probe+0x4eb/0xc30
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 136:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
otx2_ptp_destroy+0x38/0x80
otx2_remove+0x10d/0x4c0
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug.
Fixes: 2958d17a89 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
Fixes: fdf24086f4 ("cnic: Defer iscsi connection cleanup")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink_rate_node_get_by_name() and devlink_rate_nodes_destroy() have a
couple of unnecessary static variables for iterating over devlink rates.
This could lead to races/corruption/unhappiness if two concurrent
operations execute the same function.
Remove 'static' from both. It's amazing this was missed for 4+ years.
While at it, I confirmed there are no more examples of this mistake in
net/ with 1, 2 or 3 levels of indentation.
Fixes: a8ecb93ef0 ("devlink: Introduce rate nodes")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The expression `(conf->instr_type == 64) << iq_no` can overflow because
`iq_no` may be as high as 64 (`CN23XX_MAX_RINGS_PER_PF`). Casting the
operand to `u64` ensures correct 64-bit arithmetic.
Fixes: f21fb3ed36 ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
