Loss recovery undo_retrans bookkeeping had a long-standing bug where a
DSACK from a spurious TLP retransmit packet could cause an erroneous
undo of a fast recovery or RTO recovery that repaired a single
really-lost packet (in a sequence range outside that of the TLP
retransmit). Basically, because the loss recovery state machine didn't
account for the fact that it sent a TLP retransmit, the DSACK for the
TLP retransmit could erroneously be implicitly be interpreted as
corresponding to the normal fast recovery or RTO recovery retransmit
that plugged a real hole, thus resulting in an improper undo.
For example, consider the following buggy scenario where there is a
real packet loss but the congestion control response is improperly
undone because of this bug:
+ send packets P1, P2, P3, P4
+ P1 is really lost
+ send TLP retransmit of P4
+ receive SACK for original P2, P3, P4
+ enter fast recovery, fast-retransmit P1, increment undo_retrans to 1
+ receive DSACK for TLP P4, decrement undo_retrans to 0, undo (bug!)
+ receive cumulative ACK for P1-P4 (fast retransmit plugged real hole)
The fix: when we initialize undo machinery in tcp_init_undo(), if
there is a TLP retransmit in flight, then increment tp->undo_retrans
so that we make sure that we receive a DSACK corresponding to the TLP
retransmit, as well as DSACKs for all later normal retransmits, before
triggering a loss recovery undo. Note that we also have to move the
line that clears tp->tlp_high_seq for RTO recovery, so that upon RTO
we remember the tp->tlp_high_seq value until tcp_init_undo() and clear
it only afterward.
Also note that the bug dates back to the original 2013 TLP
implementation, commit 6ba8a3b19e ("tcp: Tail loss probe (TLP)").
However, this patch will only compile and work correctly with kernels
that have tp->tlp_retrans, which was added only in v5.8 in 2020 in
commit 76be93fc07 ("tcp: allow at most one TLP probe per flight").
So we associate this fix with that later commit.
Fixes: 76be93fc07 ("tcp: allow at most one TLP probe per flight")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Kevin Yang <yyd@google.com>
Link: https://patch.msgid.link/20240703171246.1739561-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason A. Donenfeld says:
====================
wireguard fixes for 6.10-rc7
These are four small fixes for WireGuard, which are all marked for
stable:
1) A QEMU command line fix to remove deprecated flags.
2) Use of proper unaligned helpers to avoid unaligned memory access on
some systems, from Helge.
3) Two patches to annotate intentional data races, so KCSAN and syzbot
don't get upset.
====================
Link: https://patch.msgid.link/20240704154517.1572127-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the parisc platform, the kernel issues kernel warnings because
swap_endian() tries to load a 128-bit IPv6 address from an unaligned
memory location:
Kernel: unaligned access to 0x55f4688c in wg_allowedips_insert_v6+0x2c/0x80 [wireguard] (iir 0xf3010df)
Kernel: unaligned access to 0x55f46884 in wg_allowedips_insert_v6+0x38/0x80 [wireguard] (iir 0xf2010dc)
Avoid such unaligned memory accesses by instead using the
get_unaligned_be64() helper macro.
Signed-off-by: Helge Deller <deller@gmx.de>
[Jason: replace src[8] in original patch with src+8]
Cc: stable@vger.kernel.org
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-3-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'phy' parameter supplied to lan9303_phy_read/_write was sometimes a
DSA port number and sometimes a PHY address. This isn't a problem as
long as they are equal. But if the external phy_addr_sel_strap pin is
wired to 'high', the PHY addresses change from 0-1-2 to 1-2-3 (CPU,
slave0, slave1). In this case, lan9303_phy_read/_write must translate
between DSA port numbers and the corresponding PHY address.
Fixes: a1292595e0 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240703145718.19951-1-ceggers@arri.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
Pull s390 fixes from Heiko Carstens:
- Fix and add physical to virtual address translations in dasd and
virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
More code cleanup will follow.
- Small defconfig updates
* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
s390/vfio_ccw: Fix target addresses of TIC CCWs
s390: Update defconfigs
Pull x86 platform driver fix from Hans de Goede:
- Fix regression in toshiba_acpi introduced in 6.10-rc1
* tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: toshiba_acpi: Fix quickstart quirk handling
Pull Kselftest fix from Mickaël Salaün:
"Fix Kselftests timeout.
We can't use CLONE_VFORK, since that blocks the parent - and thus the
timeout handling - until the child exits or execve's.
Go back to using plain fork()"
* tag 'kselftest-fix-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/harness: Fix tests timeout and race condition
Pull misc fixes from, Andrew Morton:
"6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues
and three unrelated MM fixes"
* tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix incorrect inode allocation from reserved inodes
nilfs2: add missing check for inode numbers on directory entries
nilfs2: fix inode number range checks
mm: avoid overflows in dirty throttling logic
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
mm: optimize the redundant loop of mm_update_owner_next()
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
Fixes: 438ba39b25 ("bnxt_en: Improve RSS context reservation infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20240625010210.2002310-1-kuba@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240703180112.78590-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b217127e5e ("mlxsw: core_linecards: Add line card objects and implement provisioning")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a oneliner patch to inconditionally flush
workqueue containing stale objects to be released, syzbot managed to
trigger UaF. Patch from Florian Westphal.
netfilter pull request 24-07-04
* tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: unconditionally flush pending work before notifier
====================
Link: https://patch.msgid.link/20240703223304.1455-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.
inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.
Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.
[1]
BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline]
BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71
raw_lookup net/ipv4/raw_diag.c:49 [inline]
raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71
raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99
inet_diag_cmd_exact+0x7d9/0x980
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline]
inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564
sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x332/0x3d0 net/socket.c:745
____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585
___sys_sendmsg+0x271/0x3b0 net/socket.c:2639
__sys_sendmsg net/socket.c:2668 [inline]
__do_sys_sendmsg net/socket.c:2677 [inline]
__se_sys_sendmsg net/socket.c:2675 [inline]
__x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675
x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71
raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99
inet_diag_cmd_exact+0x7d9/0x980
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline]
inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564
sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x332/0x3d0 net/socket.c:745
____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585
___sys_sendmsg+0x271/0x3b0 net/socket.c:2639
__sys_sendmsg net/socket.c:2668 [inline]
__do_sys_sendmsg net/socket.c:2677 [inline]
__se_sys_sendmsg net/socket.c:2675 [inline]
__x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675
x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable req.i created at:
inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline]
inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426
sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282
CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Fixes: 432490f9d4 ("net: ip, diag -- Add diag interface for raw sockets")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240703091649.111773-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Zijian Zhang says:
====================
fix OOM and order check in msg_zerocopy selftest
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
And, we find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
====================
Link: https://patch.msgid.link/20240701225349.3395580-1-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
IOW, calling _test_bit() avoids potential compile-time optimizations.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc ("ice: read internal temperature sensor")
Acked-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KMSAN reported uninit-value access in __unix_walk_scc() [1].
In the list_for_each_entry_reverse() loop, when the vertex's index
equals it's scc_index, the loop uses the variable vertex as a
temporary variable that points to a vertex in scc. And when the loop
is finished, the variable vertex points to the list head, in this case
scc, which is a local variable on the stack (more precisely, it's not
even scc and might underflow the call stack of __unix_walk_scc():
container_of(&scc, struct unix_vertex, scc_entry)).
However, the variable vertex is used under the label prev_vertex. So
if the edge_stack is not empty and the function jumps to the
prev_vertex label, the function will access invalid data on the
stack. This causes the uninit-value access issue.
Fix this by introducing a new temporary variable for the loop.
[1]
BUG: KMSAN: uninit-value in __unix_walk_scc net/unix/garbage.c:478 [inline]
BUG: KMSAN: uninit-value in unix_walk_scc net/unix/garbage.c:526 [inline]
BUG: KMSAN: uninit-value in __unix_gc+0x2589/0x3c20 net/unix/garbage.c:584
__unix_walk_scc net/unix/garbage.c:478 [inline]
unix_walk_scc net/unix/garbage.c:526 [inline]
__unix_gc+0x2589/0x3c20 net/unix/garbage.c:584
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312
worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393
kthread+0x3c4/0x530 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Uninit was stored to memory at:
unix_walk_scc net/unix/garbage.c:526 [inline]
__unix_gc+0x2adf/0x3c20 net/unix/garbage.c:584
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312
worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393
kthread+0x3c4/0x530 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Local variable entries created at:
ref_tracker_free+0x48/0xf30 lib/ref_tracker.c:222
netdev_tracker_free include/linux/netdevice.h:4058 [inline]
netdev_put include/linux/netdevice.h:4075 [inline]
dev_put include/linux/netdevice.h:4101 [inline]
update_gid_event_work_handler+0xaa/0x1b0 drivers/infiniband/core/roce_gid_mgmt.c:813
CPU: 1 PID: 12763 Comm: kworker/u8:31 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: events_unbound __unix_gc
Fixes: 3484f06317 ("af_unix: Detect Strongly Connected Components.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240702160428.10153-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc1/0x5e0 mm/kasan/report.c:475
kasan_report+0xbe/0xf0 mm/kasan/report.c:588
strlen+0x7d/0xa0 lib/string.c:418
__fortify_strlen include/linux/fortify-string.h:210 [inline]
in4_pton+0xa3/0x3f0 net/core/utils.c:130
bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
__bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
__bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
dev_attr_store+0x54/0x80 drivers/base/core.c:2366
sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x96a/0xd80 fs/read_write.c:584
ksys_write+0x122/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---
Fix it by adding a check of string length before using it.
Fixes: f9de11a165 ("bonding: add ip checks when store ip target")
Signed-off-by: Yue Sun <samsun1006219@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The use-after-free is actually in rswitch_tx_free(), which is inlined in
rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the
same pointer, the skb is first freed using dev_kfree_skb_any(), then the
value in skb->len is used to update the interface statistics.
Let's move around the instructions to use skb->len before the skb is
freed.
This bug is trivial to reproduce using KFENCE. It will trigger a splat
every few packets. A simple ARP request or ICMP echo request is enough.
Fixes: 271e015b91 ("net: rswitch: Add unmap_addrs instead of dma address in each desc")
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240702210838.2703228-1-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reports:
KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831
KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530
KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45
[..]
Workqueue: events nf_tables_trans_destroy_work
Call Trace:
nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline]
nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline]
nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Problem is that the notifier does a conditional flush, but its possible
that the table-to-be-removed is still referenced by transactions being
processed by the worker, so we need to flush unconditionally.
We could make the flush_work depend on whether we found a table to delete
in nf-next to avoid the flush for most cases.
AFAICS this problem is only exposed in nf-next, with
commit e169285f8c ("netfilter: nf_tables: do not store nft_ctx in transaction objects"),
with this commit applied there is an unconditional fetch of
table->family which is whats triggering the above splat.
Fixes: 2c9f029328 ("netfilter: nf_tables: flush pending destroy work before netlink notifier")
Reported-and-tested-by: syzbot+4fd66a69358fc15ae2ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4fd66a69358fc15ae2ad
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull tracing fix from Steven Rostedt:
"Fix ioctl conflict with memmapped ring buffer ioctl
It was reported that the ioctl() number used to update the ring buffer
memory mapping conflicted with the TCGETS ioctl causing strace to
report:
$ strace -e ioctl stty
ioctl(0, TCGETS or TRACE_MMAP_IOCTL_GET_READER, {c_iflag=ICRNL|IXON, c_oflag=NL0|CR0|TAB0|BS0|VT0|FF0|OPOST|ONLCR, c_cflag=B38400|CS8|CREAD, c_lflag=ISIG|ICANON|ECHO|ECHOE|ECHOK|IEXTEN|ECHOCTL|ECHOKE, ...}) = 0
Since this ioctl hasn't been in a full release yet, change it from
"T", 0x1 to "R" 0x20, and also reserve 0x20-0x2F for future ioctl
commands, as some more are being worked on for the future"
* tag 'trace-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have memmapped ring buffer use ioctl of "R" range 0x20-2F
If the bitmap block that manages the inode allocation status is corrupted,
nilfs_ifile_create_inode() may allocate a new inode from the reserved
inode area where it should not be allocated.
Previous fix commit d325dc6eb7 ("nilfs2: fix use-after-free bug of
struct nilfs_root"), fixed the problem that reserved inodes with inode
numbers less than NILFS_USER_INO (=11) were incorrectly reallocated due to
bitmap corruption, but since the start number of non-reserved inodes is
read from the super block and may change, in which case inode allocation
may occur from the extended reserved inode area.
If that happens, access to that inode will cause an IO error, causing the
file system to degrade to an error state.
Fix this potential issue by adding a wraparound option to the common
metadata object allocation routine and by modifying
nilfs_ifile_create_inode() to disable the option so that it only allocates
inodes with inode numbers greater than or equal to the inode number read
in "nilfs->ns_first_ino", regardless of the bitmap status of reserved
inodes.
Link: https://lkml.kernel.org/r/20240623051135.4180-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "nilfs2: fix potential issues related to reserved inodes".
This series fixes one use-after-free issue reported by syzbot, caused by
nilfs2's internal inode being exposed in the namespace on a corrupted
filesystem, and a couple of flaws that cause problems if the starting
number of non-reserved inodes written in the on-disk super block is
intentionally (or corruptly) changed from its default value.
This patch (of 3):
In the current implementation of nilfs2, "nilfs->ns_first_ino", which
gives the first non-reserved inode number, is read from the superblock,
but its lower limit is not checked.
As a result, if a number that overlaps with the inode number range of
reserved inodes such as the root directory or metadata files is set in the
super block parameter, the inode number test macros (NILFS_MDT_INODE and
NILFS_VALID_INODE) will not function properly.
In addition, these test macros use left bit-shift calculations using with
the inode number as the shift count via the BIT macro, but the result of a
shift calculation that exceeds the bit width of an integer is undefined in
the C specification, so if "ns_first_ino" is set to a large value other
than the default value NILFS_USER_INO (=11), the macros may potentially
malfunction depending on the environment.
Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and
by preventing bit shifts equal to or greater than the NILFS_USER_INO
constant in the inode number test macros.
Also, change the type of "ns_first_ino" from signed integer to unsigned
integer to avoid the need for type casting in comparisons such as the
lower bound check introduced this time.
Link: https://lkml.kernel.org/r/20240623051135.4180-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240623051135.4180-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The dirty throttling logic is interspersed with assumptions that dirty
limits in PAGE_SIZE units fit into 32-bit (so that various multiplications
fit into 64-bits). If limits end up being larger, we will hit overflows,
possible divisions by 0 etc. Fix these problems by never allowing so
large dirty limits as they have dubious practical value anyway. For
dirty_bytes / dirty_background_bytes interfaces we can just refuse to set
so large limits. For dirty_ratio / dirty_background_ratio it isn't so
simple as the dirty limit is computed from the amount of available memory
which can change due to memory hotplug etc. So when converting dirty
limits from ratios to numbers of pages, we just don't allow the result to
exceed UINT_MAX.
This is root-only triggerable problem which occurs when the operator
sets dirty limits to >16 TB.
Link: https://lkml.kernel.org/r/20240621144246.11148-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-By: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: Avoid possible overflows in dirty throttling".
Dirty throttling logic assumes dirty limits in page units fit into
32-bits. This patch series makes sure this is true (see patch 2/2 for
more details).
This patch (of 2):
This reverts commit 9319b64790.
The commit is broken in several ways. Firstly, the removed (u64) cast
from the multiplication will introduce a multiplication overflow on 32-bit
archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the
default settings with 4GB of RAM will trigger this). Secondly, the
div64_u64() is unnecessarily expensive on 32-bit archs. We have
div64_ul() in case we want to be safe & cheap. Thirdly, if dirty
thresholds are larger than 1<<32 pages, then dirty balancing is going to
blow up in many other spectacular ways anyway so trying to fix one
possible overflow is just moot.
Link: https://lkml.kernel.org/r/20240621144017.30993-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240621144246.11148-1-jack@suse.cz
Fixes: 9319b64790 ("mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-By: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull io_uring fix from Jens Axboe:
"A fix for a feature that went into the 6.10 merge window actually
ended up causing a regression in building bundles for receives.
Fix that up by ensuring we don't overwrite msg_inq before we use
it in the loop"
* tag 'io_uring-6.10-20240703' of git://git.kernel.dk/linux:
io_uring/net: don't clear msg_inq before io_recv_buf_select() needs it
Pull media fixes from Mauro Carvalho Chehab:
"Some fixes related to the IPU6 driver"
* tag 'media/v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ivsc: Depend on IPU_BRIDGE or not IPU_BRIDGE
media: intel/ipu6: Fix a null pointer dereference in ipu6_isys_query_stream_by_source
media: ipu6: Use the ISYS auxdev device as the V4L2 device's device
Fix invalid dereferencing of indirect CCW data pointer in
dasd_eckd_dump_sense() that leads to a kernel panic in error cases.
When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer
does not contain the data address itself but a pointer to the IDAL.
This needs to be translated from physical to virtual as well before
using it.
This dereferencing is also used for dasd_page_cache and also fixed
although it is very unlikely that this code path ever gets used.
Fixes: c0bd39601c ("s390/dasd: use new address translation helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 205c50306a ("wifi: wilc1000: fix RCU usage in connect path")
made sure that the IEs data was manipulated under the relevant RCU section.
Unfortunately, while doing so, the commit brought a faulty implicit cast
from int to u8 on the ies_len variable, making the parsing fail to be
performed correctly if the IEs block is larger than 255 bytes. This failure
can be observed with Access Points appending a lot of IEs TLVs in their
beacon frames (reproduced with a Pixel phone acting as an Access Point,
which brough 273 bytes of IE data in my testing environment).
Fix IEs parsing by removing this undesired implicit cast.
Fixes: 205c50306a ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jozef Hopko <jozef.hopko@altana.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240701-wilc_fix_ies_data-v1-1-7486cbacf98a@bootlin.com
The processing of a Transfer-In-Channel (TIC) CCW requires locating
the target of the CCW in the channel program, and updating the
address to reflect what will actually be sent to hardware.
An error exists where the 64-bit virtual address is truncated to
32-bits (variable "cda") when performing this math. Since s390
addresses of that size are 31-bits, this leaves that additional
bit enabled such that the resulting I/O triggers a channel
program check. This shows up occasionally when booting a KVM
guest from a passthrough DASD device:
..snip...
Interrupt Response Block Data:
: 0x0000000000003990
Function Ctrl : [Start]
Activity Ctrl :
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status :
Channel Status : [Program-Check]
cpa=: 0x00000000008d0018
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
...snip...
dasd-ipl: Failed to run IPL1 channel program
The channel program address of "0x008d0018" in the IRB doesn't
look wrong, but tracing the CCWs shows the offending bit enabled:
ccw=0x0000012e808d0000 cda=00a0b030
ccw=0x0000012e808d0008 cda=00a0b038
ccw=0x0000012e808d0010 cda=808d0008
ccw=0x0000012e808d0018 cda=00a0b040
Fix the calculation of the TIC CCW's data address such that it points
to a valid 31-bit address regardless of the input address.
Fixes: bd36cfbbb9 ("s390/vfio_ccw_cp: use new address translation helpers")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240628163738.3643513-1-farman@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 750011e239 ("net: stmmac: Add support for HW-accelerated VLAN
stripping") enables MAC level VLAN tag stripping for all MAC cores, but
leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac
and xgmac.
On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and
driver do nothing about VLAN packets actually, although VLAN works well.
Driver level stripping should be used on gmac and xgmac for now.
Fixes: 750011e239 ("net: stmmac: Add support for HW-accelerated VLAN stripping")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
