The current code to deal with named modes will only set the mode name, and
then it's up to drivers to try to match that name to whatever mode or
configuration they see fit.
The plan is to remove that need and move the named mode handling out of
drivers and into the core, and only rely on modes and properties. Let's
start by properly filling drm_cmdline_mode from a named mode.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-11-24b168e5bcd5@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com
Summary:
* Add support to turn on/off backlight when changing values in bl_power
file. This is achieved by using function backlight_get_brightness()
in nva3_set_intensity to get current brightness.
Test plan:
* Turn off:
echo 1 > /sys/class/backlight/nv_backlight/bl_power
* Turn on:
echo 0 > /sys/class/backlight/nv_backlight/bl_power
Signed-off-by: Antonio Gomes <antoniospg100@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104220424.41164-1-antoniospg100@gmail.com
v3d_perfmon_open_file() instantiates a mutex for a particular file
instance, but it never destroys it by calling mutex_destroy() in
v3d_perfmon_close_file().
Similarly, v3d_perfmon_create_ioctl() instantiates a mutex for a
particular perfmon, but it never destroys it by calling mutex_destroy()
in v3d_perfmon_destroy_ioctl().
So, add the missing mutex_destroy on both cases.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108175425.39819-3-mcanal@igalia.com
In case the LCDIFv3 is used to drive a 4k panel via i.MX8MP HDMI bridge,
the LCDIFv3 becomes susceptible to FIFO underflows, these lead to nasty
flicker of the image on the panel, or image being shifted by half frame
horizontally every second frame. The flicker can be easily triggered by
running 3D application on top of weston compositor, like neverball or
chromium. Surprisingly glmark2-es2-wayland or glmark2-es2-drm does not
trigger this effect so easily.
Configure the FIFO Panic threshold register and enable the FIFO Panic
mode, which internally boosts the NoC interconnect priority for LCDIFv3
transactions in case of possible underflow. This mitigates the flicker
effect on 4k panels as well.
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Liu Ying <victor.liu@nxp.com> # i.MX8mp EVK
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101152629.21768-1-marex@denx.de
Move the vmap code for shadow-plane helpers from prepare_fb to
begin_fb_access helpers. Vunmap is now performed at the end of
the current pageflip, instead of the end of the following pageflip.
Reduces the duration of the mapping from while the framebuffer is
being displayed to just the atomic commit. This is safe as outside
of the pageflip, nothing should access the mapped buffer memory.
Unmapping the framebuffer BO memory early allows to reduce address-
space consumption and possibly allows for evicting the memory pages.
The change is effectively a rename of prepare_fb and cleanup_fb
implementations, plus updates to the shadow-plane init macro. As
there's no longer a prepare_fb helper for shadow planes, atomic
helpers will call drm_gem_plane_helper_prepare_fb() automatically.
v2:
* fix typos in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025101737.8874-3-tzimmermann@suse.de
Add {begin,end}_fb_access helpers to run at the beginning and end of
an atomic commit. The begin_fb_access helper acquires resources that
are necessary to perform the atomic commit. It it similar to prepare_fb,
except that the resources are to be released at the end of the commit.
Resources acquired by prepare_fb are held until after the next pageflip.
The end_fb_access helper performs the corresponding resource cleanup.
Atomic helpers call it with the new plane state. This is different from
cleanup_fb, which releases resources of the old plane state.
v2:
* fix typos in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025101737.8874-2-tzimmermann@suse.de
drm_mode_config_init() simply calls drmm_mode_config_init(), hence
cleanup is automatically handled through registering
drm_mode_config_cleanup() with drmm_add_action_or_reset().
While at it, get rid of the deprecated drm_mode_config_init() and
replace it with drmm_mode_config_init() directly.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026153431.72033-5-dakr@redhat.com
The "40nm" MIPI DSI controller found in the A100 and D1 SoCs has the
same register layout as previous SoC integrations. However, its module
clock now comes from the TCON, which means it no longer runs at a fixed
rate, so this needs to be distinguished in the driver.
The controller also now uses pins on Port D instead of dedicated pins,
so it drops the separate power domain.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221107053552.2330-3-samuel@sholland.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
