symbol__disassemble_capstone_powerpc() goto the 'err' label when it
failed in the loop that created disasm_line, and then used free()
directly to free disasm_line. Since the structure disasm_line contains
members that allocate memory dynamically, this can result in a memory
leak. In fact, we can simply break the loop when it fails in the middle
of the loop, and disasm_line__free() will then be called to properly
free the created line. Other error paths do not need to consider freeing
disasm_line.
Fixes: c5d60de181 ("perf annotate: Add support to use libcapstone in powerpc")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: sesse@google.com
Cc: kjain@linux.ibm.com
Link: https://lore.kernel.org/r/20241019154157.282038-2-lihuafei1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The evsel__detect_missing_features() is to check if the attributes of
the evsel is supported or not. But it checks the attribute based on the
given evsel, it might miss something if the attr doesn't have the bit or
give incorrect results if the event is special.
Also it maintains the order of the feature that was added to the kernel
which means it can assume older features should be supported once it
detects the current feature is working. To minimized the confusion and
to accurately check the kernel features, I think it's better to use a
software event and go through all the features at once.
Also make the function static since it's only used in evsel.c.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It seems perf sets the exclude_guest bit because of Intel PEBS
implementation which uses a virtual address. IIUC now kernel disables
PEBS when it goes to the guest mode regardless of this bit so we don't
need to set it explicitly. At least for the other archs/vendors.
I found the commit 1342798cc1 set the exclude_guest for precise_ip
in the tool and the commit 20b279ddb3 added kernel side enforcement
which was reverted by commit a706d965dc later.
Actually it doesn't set the exclude_guest for the default event
(cycles:P) already.
$ grep -m1 vendor /proc/cpuinfo
vendor_id : GenuineIntel
$ perf record -e cycles:P true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ]
$ perf evlist -v | tr ',' '\n' | grep -e exclude -e precise
precise_ip: 3
But having lower 'p' modifier set the bit for some reason.
$ perf record -e cycles:pp true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ]
$ perf evlist -v | tr ',' '\n' | grep -e exclude -e precise
precise_ip: 2
exclude_guest: 1
Actually AMD IBS suffers from this because it doesn't support excludes
and having this bit effectively disables new features in the current
implementation (due to the missing feature check).
$ grep -m1 vendor /proc/cpuinfo
vendor_id : AuthenticAMD
$ perf record -W -e cycles:p -vv true 2>&1 | grep switching
switching off PERF_FORMAT_LOST support
switching off weight struct support
switching off bpf_event
switching off ksymbol
switching off cloexec flag
switching off mmap2
switching off exclude_guest, exclude_host
By not setting exclude_guest, we can fix this inconsistency and the
troubles.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The exclude_guest in the event attribute is to limit profiling in the
host environment. But I'm not sure why we want to set it by default
cause we don't care about it in most cases and I feel like it just
makes new PMU implementation complicated.
Of course it's useful for perf kvm command so I added the
exclude_GH_default variable to preserve the old behavior for perf kvm
and other commands like perf record and stat won't set the exclude bit.
This is helpful for AMD IBS case since having exclude_guest bit will
clear new feature bit due to the missing feature check logic.
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = 0
$ perf record -W -e ibs_op// -vv true 2>&1 | grep switching
switching off PERF_FORMAT_LOST support
switching off weight struct support
switching off bpf_event
switching off ksymbol
switching off cloexec flag
switching off mmap2
switching off exclude_guest, exclude_host
Intestingly, I found it sets the exclude_bit if "u" modifier is used.
I don't know why but it's neither intuitive nor consistent. Let's
remove the bit there too.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Using it:
$ perf test -w noplop
No workload found: noplop
$
$ perf test -w
Error: switch `w' requires a value
Usage: perf test [<options>] [{list <test-name-fragment>|[<test-name-fragments>|<test-numbers>]}]
-w, --workload <work>
workload to run for testing, use '--list-workloads' to list the available ones.
$
$ perf test --list-workloads
noploop
thloop
leafloop
sqrtloop
brstack
datasym
landlock
$
Would be good at some point to have a description in 'struct test_workload'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/r/20241020021842.1752770-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
For events that count data cache fills, some combinations of the unit
mask bits are useful for counting fills from local caches, DRAM or any
far sources. However, named events currently exist for PMCx044 (Any Data
Cache Fills) only. Add similar events for the following base events.
* PMCx043 (Demand Data Cache Fills)
* PMCx059 (Software Prefetch Data Cache Fills)
* PMCx05A (Hardware Prefetch Data Cache Fills)
While at it, remove "ls_any_fills_from_sys.all_dram_io" since it is a
duplicate of "ls_any_fills_from_sys.dram_io_all".
Event descriptions can be found in Section 2.1.16.5.2 "Load/Store (LS)
Events" of the Processor Programming Reference (PPR) for AMD Family 1Ah
Model 02h Revision C1 Processors document available at the link below.
Link: https://bugzilla.kernel.org/attachment.cgi?id=307010
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ananth.narayan@amd.com
Cc: ravi.bangoria@amd.com
Cc: eranian@google.com
Link: https://lore.kernel.org/r/e036e3c9fb962c939fa06c855b68e532ee609e01.1729242778.git.sandipan.das@amd.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Perf test case 84 'perf pipe recording and injection test'
sometime fails on s390, especially on z/VM virtual machines.
This is caused by a very short run time of workload
# perf test -w noploop
which runs for 1 second. Occasionally this is not long
enough and the perf report has no samples for symbol noploop.
Fix this and enlarge the runtime for the perf work load
to 3 seconds. This ensures the symbol noploop is always
present. Since only s390 is affected, make this loop
architecture dependend.
Output before:
Inject -b build-ids test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.277 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.160 MB
/tmp/perf.data.ELzRdq (4031 samples) ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
Inject -b build-ids test [Success]
Inject --buildid-all build-ids test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB - ]
Inject --buildid-all build-ids test [Failed - cannot find
noploop function in pipe #2]
Output after:
Successful execution for over 10 times in a loop.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Link: https://lore.kernel.org/r/20241018081732.1391060-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Like in the metricgroup tests, it should check the permission first and
then skip relevant failures accordingly.
Also it needs to try again with the system wide flag properly. On the
second round, check if the result has the metric name because other
failure cases are checked in the first round already.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241018204306.741972-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
An issue can be observed when probe C++ demangled symbol with steps:
# nm test_cpp_mangle | grep print_data
0000000000000c94 t _GLOBAL__sub_I__Z10print_datai
0000000000000afc T _Z10print_datai
0000000000000b38 T _Z10print_dataR5Point
# perf probe -x /home/niayan01/test_cpp_mangle -F --demangle
...
print_data(Point&)
print_data(int)
...
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
probe-definition(0): test=print_data(int)
symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(int) address found : afc
Matched function: print_data [2ccf]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xb38
...
When tried to probe symbol "print_data(int)", the log shows:
Symbol print_data(int) address found : afc
The found address is 0xafc - which is right with verifying the output
result from nm. Afterwards when write event, the command uses offset
0xb38 in the last log, which is a wrong address.
The dwarf_diename() gets a common function name, in above case, it
returns string "print_data". As a result, the tool parses the offset
based on the common name. This leads to probe at the wrong symbol
"print_data(Point&)".
To fix the issue, use the die_get_linkage_name() function to retrieve
the distinct linkage name - this is the mangled name for the C++ case.
Based on this unique name, the tool can get a correct offset for
probing. Based on DWARF doc, it is possible the linkage name is missed
in the DIE, it rolls back to use dwarf_diename().
After:
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test=print_data(int)"
probe-definition(0): test=print_data(int)
symbol:print_data(int) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(int) address found : afc
Matched function: print_data [2d06]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0xafc
Added new event:
probe_test_cpp_mangle:test (on print_data(int) in /home/niayan01/test_cpp_mangle)
You can now use it in all perf tools, such as:
perf record -e probe_test_cpp_mangle:test -aR sleep 1
# perf --debug verbose=3 probe -x test_cpp_mangle --add "test2=print_data(Point&)"
probe-definition(0): test2=print_data(Point&)
symbol:print_data(Point&) file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /home/niayan01/test_cpp_mangle
Try to find probe point from debuginfo.
Symbol print_data(Point&) address found : b38
Matched function: print_data [2ccf]
Probe point found: print_data+0
Found 1 probe_trace_events.
Opening /sys/kernel/tracing//uprobe_events write=1
Parsing probe_events: p:probe_test_cpp_mangle/test /home/niayan01/test_cpp_mangle:0x0000000000000afc
Group:probe_test_cpp_mangle Event:test probe:p
Opening /sys/kernel/tracing//README write=0
Writing event: p:probe_test_cpp_mangle/test2 /home/niayan01/test_cpp_mangle:0xb38
Added new event:
probe_test_cpp_mangle:test2 (on print_data(Point&) in /home/niayan01/test_cpp_mangle)
You can now use it in all perf tools, such as:
perf record -e probe_test_cpp_mangle:test2 -aR sleep 1
Fixes: fb1587d869 ("perf probe: List probes with line number and file name")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20241012141432.877894-1-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf list picks the events supported for specific platform
from pmu-events/arch/powerpc/<platform>. Example power10 events
are in pmu-events/arch/powerpc/power10, power9 events are part
of pmu-events/arch/powerpc/power9. The decision of which
platform to pick is determined based on PVR value in powerpc.
The PVR value is matched from pmu-events/arch/powerpc/mapfile.csv
Example:
Format:
PVR,Version,JSON/file/pathname,Type
0x004[bcd][[:xdigit:]]{4},1,power8,core
0x0066[[:xdigit:]]{4},1,power8,core
0x004e[[:xdigit:]]{4},1,power9,core
0x0080[[:xdigit:]]{4},1,power10,core
0x0082[[:xdigit:]]{4},1,power10,core
The code gets the PVR from system using get_cpuid_str function
in arch/powerpc/util/headers.c ( from SPRN_PVR ) and compares
with value from mapfile.csv
In case of compat mode, say when partition is booted in a power9
mode when the system is a power10, this picks incorrectly. Because
PVR will point to power10 where as it should pick events from power9
folder. To support generic events, add new folder
pmu-events/arch/powerpc/compat to contain the ISA architected events
which is supported in compat mode. Also return 0x00ffffff as pvr
when booted in compat mode. Based on this pvr value, json will
pick events from pmu-events/arch/powerpc/compat
Suggested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: hbathini@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20241010145107.51211-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf list picks the events supported for specific platform
from pmu-events/arch/powerpc/<platform>. Example power10 events
are in pmu-events/arch/powerpc/power10, power9 events are part
of pmu-events/arch/powerpc/power9. The decision of which
platform to pick is determined based on PVR value in powerpc.
The PVR value is matched from pmu-events/arch/powerpc/mapfile.csv
Example:
Format:
PVR,Version,JSON/file/pathname,Type
0x004[bcd][[:xdigit:]]{4},1,power8,core
0x0066[[:xdigit:]]{4},1,power8,core
0x004e[[:xdigit:]]{4},1,power9,core
0x0080[[:xdigit:]]{4},1,power10,core
0x0082[[:xdigit:]]{4},1,power10,core
The code gets the PVR from system using get_cpuid_str function
in arch/powerpc/util/headers.c ( from SPRN_PVR ) and compares
with value from mapfile.csv
In case of compat mode, say when partition is booted in a power9
mode when the system is a power10, add an entry to pick the
ISA architected events from "pmu-events/arch/powerpc/compat".
Add json file generic-events.json which will contain these
events which is supported in compat mode.
Suggested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: hbathini@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20241010145107.51211-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
During the rework of the dso structure in patch ee756ef749 an
increment was forgotten for the symtab_type in case the data for
the kernel module are compressed. This affects the probing of the
kernel modules, which fails if the data are not already cached.
Increment the value of the symtab_type to its compressed variant so the
data could be recovered successfully.
Fixes: ee756ef749 ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20241010144836.16424-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
