Pull btrfs fixes from David Sterba:
- revert device path canonicalization, this does not work as intended
with namespaces and is not reliable in all setups
- fix crash in scrub when checksum tree is not valid, e.g. when mounted
with rescue=ignoredatacsums
- fix crash when tracepoint btrfs_prelim_ref_insert is enabled
- other minor fixups:
- open code folio_index(), meant to be used in MM code
- use matching type for sizeof in compression allocation
* tag 'for-6.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: open code folio_index() in btree_clear_folio_dirty_tag()
Revert "btrfs: canonicalize the device path before adding it"
btrfs: avoid NULL pointer dereference if no valid csum tree
btrfs: handle empty eb->folios in num_extent_folios()
btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref
btrfs: compression: adjust cb->compressed_folios allocation type
Pull device mapper fixes from Mikulas Patocka:
- fix reading past the end of allocated memory
- fix missing dm_put_live_table() in dm_keyslot_evict()
* tag 'for-6.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix copying after src array boundaries
dm: add missing unlock on in dm_keyslot_evict()
Pull uml fix from Johannes Berg:
"There's just a single fix here for the _nofault changes that were
causing issues with clang, and then when we looked at it some other
issues seemed to exist"
* tag 'uml-for-linux-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: fix _nofault accesses
Pull SoC fixes from Arnd Bergmann:
"The main changes are once more for the NXP i.MX platform, addressing
multiple regressions in recent devicetree updates for the i.MX8MM and
i.MX6ULL SoCs, a PCIe fix for i.MX9 and a MAINTAINERS file update to
disambiguate NXP i.MX SoCs from Sony IMX image sensors.
The stm32 platform devicetree files get some compatibility fixes for
the interrupt controller node.
Another compatibility fix is done for the Arm Morello platform's cache
controller node.
The code changes are all for firmware drivers, fixing kernel-side bugs
on the Arm FF-A and SCMI drivers"
* tag 'soc-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp23 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp23 SoCs
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp21 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp21 SoCs
arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs
arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs
arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2
MAINTAINERS: add exclude for dt-bindings to imx entry
ARM: dts: opos6ul: add ksz8081 phy properties
arm64: dts: imx95: Correct the range of PCIe app-reg region
arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI
arm64: dts: morello: Fix-up cache nodes
firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
firmware: arm_scmi: Fix timeout checks on polling path
firmware: arm_scmi: Balance device refcount when destroying devices
Nathan reported [1] that when built with clang, the um kernel
crashes pretty much immediately. This turned out to be an issue
with the inline assembly I had added, when clang used %rax/%eax
for both operands. Reorder it so current->thread.segv_continue
is written first, and then the lifetime of _faulted won't have
overlap with the lifetime of segv_continue.
In the email thread Benjamin also pointed out that current->mm
is only NULL for true kernel tasks, but we could do this for a
userspace task, so the current->thread.segv_continue logic must
be lifted out of the mm==NULL check.
Finally, while looking at this, put a barrier() so the NULL
assignment to thread.segv_continue cannot be reorder before
the possibly faulting operation.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20250402221254.GA384@ax162 [1]
Fixes: d1d7f01f7c ("um: mark rodata read-only and implement _nofault accesses")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull perf tools fixes from Namhyung Kim:
"Just a couple of build fixes on arm64"
* tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Fix in-source libperf build
perf tools: Fix arm64 build by generating unistd_64.h
Pull tracing fixes from Steven Rostedt:
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page.
But the buffer used in tracing_splice_read_pipe() only allocates a
page size. The data copied to the buffer is the amount in sub buffer
which can overflow the buffer.
Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer
level.
- Do not use the array in trace_adjust_address() if there are no
elements
The trace_adjust_address() finds the offset of a module that was
stored in the persistent buffer when reading the previous boot buffer
to see if the address belongs to a module that was loaded in the
previous boot. An array is created that matches currently loaded
modules with previously loaded modules. The trace_adjust_address()
uses that array to find the new offset of the address that's in the
previous buffer. But if no module was loaded, it ends up reading the
last element in an array that was never allocated.
Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events
list and requires the trace_event_sem semaphore held for read. But
this function is always called with that semaphore held for read.
Remove the taking of the semaphore and replace it with
lockdep_assert_held_read(&trace_event_sem)
* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not take trace_event_sem in print_event_fields()
tracing: Fix trace_adjust_address() when there is no modules in scratch area
ftrace: Fix NULL memory allocation check
tracing: Fix oob write in trace_seq_to_buffer()
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org
Pull EDAC fixes from Borislav Petkov:
- Test the correct structure member when handling correctable errors
and avoid spurious interrupts, in altera_edac
* tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Set DDR and SDMMC interrupt mask before registration
EDAC/altera: Test the correct error reg offset
Pull x86 fix from Ingo Molnar:
"Fix SEV-SNP memory acceptance from the EFI stub for guests
running at VMPL >0"
* tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
Pull misc perf fixes from Ingo Molnar:
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
perf/x86/intel: Check the X86 leader for pebs_counter_event_group
perf/x86/intel: Only check the group flag for X86 leader
Pull irq fixes from Ingo Molnar:
- Prevent NULL pointer dereference in msi_domain_debug_show()
- Fix crash in the qcom-mpm irqchip driver when configuring
interrupts for non-wake GPIOs
* tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
Commit:
d54d610243 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e864 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
Pull arm64 fix from Catalin Marinas:
"Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise
is_midr_in_range_list() reads beyond the end of these arrays"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
Pull spi fixes from Mark Brown:
"A fairly small pile of fixes, plus one new compatible string addition
to the Synopsis driver for a new platform.
The most notable thing is the fix for divide by zeros in spi-mem if an
operation has no dummy bytes"
* tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra114: Don't fail set_cs_timing when delays are zero
spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling
spi: spi-mem: Add fix to avoid divide error
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC
spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry
spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase()
spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()
Pull power management fixes from Rafael Wysocki:
"These fix three recent regressions, two in cpufreq and one in the
Intel Soundwire driver, and an unchecked MSR access in the
intel_pstate driver:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits
(Rafael Wysocki)
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with frequency boost during system resume (Viresh Kumar)
- Fix a recent regression causing resume failures to occur in the
Intel Soundwire driver if the device handled by it is in runtime
suspend before a system-wide suspend (Rafael Wysocki)
- Fix an unchecked MSR aceess in the intel_pstate driver occurring
when CPUID indicates no turbo, but the driver attempts to enable
turbo frequencies due to a misleading value read from an MSR
(Srinivas Pandruvada)"
* tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
soundwire: intel_auxdevice: Fix system suspend/resume handling
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
Pull smb client fixes from Steve French:
- fix posix mkdir error to ksmbd (also avoids crash in
cifs_destroy_request_bufs)
- two smb1 fixes: fixing querypath info and setpathinfo to old servers
- fix rsize/wsize when not multiple of page size to address DIO
reads/writes
* tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: ensure aligned IO sizes
cifs: Fix changing times and read-only attr over SMB1 smb_set_file_info() function
cifs: Fix and improve cifs_query_path_info() and cifs_query_file_info()
smb: client: fix zero length for mkdir POSIX create context
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, amdgpu and xe as usual, the new adp driver has a
bunch of vblank fixes, then a bunch of small fixes across the board.
Seems about the right level for this time in the release cycle.
ttm:
- docs warning fix
kunit
- fix leak in shmem tests
fdinfo:
- driver unbind race fix
amdgpu:
- Fix possible UAF in HDCP
- XGMI dma-buf fix
- NBIO 7.11 fix
- VCN 5.0.1 fix
xe:
- EU stall locking fix and disabling on VF
- Documentation fix kernel version supporting hwmon entries
- SVM fixes on error handling
i915:
- Fix build for CONFIG_DRM_I915_PXP=n
nouveau:
- fix race condition in fence handling
ivpu:
- interrupt handling fix
- D0i2 test mode fix
adp:
- vblank fixes
mipi-dbi:
- timing fix"
* tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
drm/gpusvm: set has_dma_mapping inside mapping loop
drm/xe/hwmon: Fix kernel version documentation for temperature
drm/xe/eustall: Do not support EU stall on SRIOV VF
drm/xe/eustall: Resolve a possible circular locking dependency
drm/amdgpu: Add DPG pause for VCN v5.0.1
drm/amdgpu: Fix offset for HDP remap in nbio v7.11
drm/amdgpu: Fail DMABUF map of XGMI-accessible memory
drm/amd/display: Fix slab-use-after-free in hdcp
drm/mipi-dbi: Fix blanking for non-16 bit formats
drm/tests: shmem: Fix memleak
drm/xe/guc: Fix capture of steering registers
drm/xe/svm: fix dereferencing error pointer in drm_gpusvm_range_alloc()
drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS
drm: adp: Remove pointless irq_lock spin lock
drm: adp: Enable vblank interrupts in crtc's .atomic_enable
drm: adp: Handle drm_crtc_vblank_get() errors
drm: adp: Use spin_lock_irqsave for drm device event_lock
drm/fdinfo: Protect against driver unbind
drm/ttm: fix the warning for hit_low and evict_low
accel/ivpu: Fix the D0i2 disable test mode
...
Merge cpufreq fixes for 6.15-rc5:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits (Rafael
Wysocki).
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with them during system resume (Viresh Kumar).
- Fix an unchecked MSR aceess in the intel_pstate driver occurring when
CPUID indicates no turbo, but the driver attempts to enable turbo
frequencies due to a misleading value read from an MSR (Srinivas
Pandruvada).
* pm-cpufreq:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Fixes: a6199bb514 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
Pull SCSI fixes from James Bottomley:
"Two minor updates, both in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove redundant query_complete trace
scsi: myrb: Fix spelling mistake "statux" -> "status"
Pull io_uring fix from Jens Axboe:
"Just a single fix, annotating the fdinfo side SQ/CQ head/tail reads
with data_race() as they are known racy.
Only serves to silence syzbot testing, by definition these debug
outputs are going to be racy as they may change as soon as we've read
them"
* tag 'io_uring-6.15-20250502' of git://git.kernel.dk/linux:
io_uring/fdinfo: annotate racy sq/cq head/tail reads
Pull bcachefs fixes from Kent Overstreet:
"Lots of assorted small fixes...
- Some repair path fixes, a fix for -ENOMEM when reconstructing lots
of alloc info on large filesystems, upgrade for ancient 0.14
filesystems, etc.
- Various assert tweaks; assert -> ERO, ERO -> log the error in the
superblock and continue
- casefolding now uses d_ops like on other casefolding filesystems
- fix device label create on device add, fix bucket array resize on
filesystem resize
- fix xattrs with FORTIFY_SOURCE builds with gcc-15/clang"
* tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs: (22 commits)
bcachefs: Remove incorrect __counted_by annotation
bcachefs: add missing sched_annotate_sleep()
bcachefs: Fix __bch2_dev_group_set()
bcachefs: Kill ERO for i_blocks check in truncate
bcachefs: check for inode.bi_sectors underflow
bcachefs: Kill ERO in __bch2_i_sectors_acct()
bcachefs: readdir fixes
bcachefs: improve missing journal write device error message
bcachefs: Topology error after insert is now an ERO
bcachefs: Use bch2_kvmalloc() for journal keys array
bcachefs: More informative error message when shutting down due to error
bcachefs: btree_root_unreadable_and_scan_found_nothing autofix for non data btrees
bcachefs: btree_node_data_missing is now autofix
bcachefs: Don't generate alloc updates to invalid buckets
bcachefs: Improve bch2_dev_bucket_missing()
bcachefs: fix bch2_dev_buckets_resize()
bcachefs: Add upgrade table entry from 0.14
bcachefs: Run BCH_RECOVERY_PASS_reconstruct_snapshots on missing subvol -> snapshot
bcachefs: Add missing utf8_unload()
bcachefs: Emit unicode version message on startup
...
Pull pin control fixes from Linus Walleij:
- Fix potential NULL dereference in the i.MX driver
- Fix the pull up/down resistor values in the Meson driver
- Fix the mapping of the PHY LED pins in the Airhoa driver
- Fix EINT interrupts on older controllers and a debounce value issue
in the Mediatek driver
- Fix an erronoeus PINGROUP define in the Qualcomm driver
* tag 'pinctrl-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Fix PINGROUP definition for sm8750
pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()
pinctrl: mediatek: Fix new design debounce issue
pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers
pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines
pinctrl: meson: define the pull up/down resistor value as 60 kOhm
pinctrl: imx: Return NULL if no group is matched and found
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes:
- Fix broken detection of the S2FWB feature
- Ensure page-size bitmap is initialised for SVA domains
- Fix handling of SMMU client devices with duplicate Stream IDs
- Don't fail SMMU probe if Stream IDs are aliased across clients
Intel VT-d fixes:
- Add quirk for IGFX device
- Revert an ATS change to fix a boot failure
AMD IOMMU:
- Fix potential buffer overflow
Core:
- Fix for iommu_copy_struct_from_user()"
* tag 'iommu-fixes-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
iommu/vt-d: Revert ATS timing change to fix boot failure
iommu: Fix two issues in iommu_copy_struct_from_user()
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
iommu/arm-smmu-v3: Fail aliasing StreamIDs more gracefully
iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
iommu/arm-smmu-v3: Add missing S2FWB feature detection
Pull slab fix from Vlastimil Babka:
- Stable fix to avoid bugs due to leftover obj_ext after allocation
profiling is disabled at runtime (Zhenhua Huang)
* tag 'slab-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab: clean up slab->obj_exts always
The folio_index() helper is only needed for mixed usage of page cache
and swap cache, for pure page cache usage, the caller can just use
folio->index instead.
It can't be a swap cache folio here. Swap mapping may only call into fs
through 'swap_rw' but btrfs does not use that method for swap.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 7e06de7c83.
Commit 7e06de7c83 ("btrfs: canonicalize the device path before adding
it") tries to make btrfs to use "/dev/mapper/*" name first, then any
filename inside "/dev/" as the device path.
This is mostly fine when there is only the root namespace involved, but
when multiple namespace are involved, things can easily go wrong for the
d_path() usage.
As d_path() returns a file path that is namespace dependent, the
resulted string may not make any sense in another namespace.
Furthermore, the "/dev/" prefix checks itself is not reliable, one can
still make a valid initramfs without devtmpfs, and fill all needed
device nodes manually.
Overall the userspace has all its might to pass whatever device path for
mount, and we are not going to win the war trying to cover every corner
case.
So just revert that commit, and do no extra d_path() based file path
sanity check.
CC: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/linux-fsdevel/20250115185608.GA2223535@zen.localdomain/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When trying read-only scrub on a btrfs with rescue=idatacsums mount
option, it will crash with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs]
scrub_simple_mirror+0x175/0x290 [btrfs]
scrub_stripe+0x5f7/0x6f0 [btrfs]
scrub_chunk+0x9a/0x150 [btrfs]
scrub_enumerate_chunks+0x333/0x660 [btrfs]
btrfs_scrub_dev+0x23e/0x600 [btrfs]
btrfs_ioctl+0x1dcf/0x2f80 [btrfs]
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[CAUSE]
Mount option "rescue=idatacsums" will completely skip loading the csum
tree, so that any data read will not find any data csum thus we will
ignore data checksum verification.
Normally call sites utilizing csum tree will check the fs state flag
NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all.
This results in scrub to call btrfs_search_slot() on a NULL pointer
and triggered above crash.
[FIX]
Check both extent and csum tree root before doing any tree search.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
num_extent_folios() unconditionally calls folio_order() on
eb->folios[0]. If that is NULL this will be a segfault. It is reasonable
for it to return 0 as the number of folios in the eb when the first
entry is NULL, so do that instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation for making the kmalloc() family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct folio **" but the returned type will be
"struct page **". These are the same allocation size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
