When linking a multi_v7_defconfig + CONFIG_KASAN=y kernel with
LD=ld.lld, the following error occurs:
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 zImage
ld.lld: error: section: .exit.data is not contiguous with other relro sections
LLD defaults to '-z relro', which is unneeded for the kernel because
program headers are not used nor is there any position independent code
generation or linking for ARM. Add '-z norelro' to LDFLAGS_vmlinux to
avoid this error.
Link: https://github.com/ClangBuiltLinux/linux/issues/1189
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The DTB magic marker is stored as a 32-bit big-endian value, and thus
depends on the CPU's endianness. Add a macro to define this value in
native endianness, to reduce #ifdef clutter and (future) duplication.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
DTB stores all values as 32-bit big-endian integers.
Add a macro to convert such values to native CPU endianness, to reduce
duplication.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit aaac373317 ("ARM: kvm: replace open coded VA->PA calculations
with adr_l call") removed all uses of .L__boot_cpu_mode_offset, so there
is no longer a need to define it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit f77ac2e378 ("ARM: 9030/1: entry: omit FP emulation for UND
exceptions taken in kernel mode") failed to take into account that there
is in fact a case where we relied on this code path: during boot, the
VFP detection code issues a read of FPSID, which will trigger an undef
exception on cores that lack VFP support.
So let's reinstate this logic using an undef hook which is registered
only for the duration of the initcall to vpf_init(), and which sets
VFP_arch to a non-zero value - as before - if no VFP support is present.
Fixes: f77ac2e378 ("ARM: 9030/1: entry: omit FP emulation for UND ...")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
There are a couple of problems with the exception entry code that deals
with FP exceptions (which are reported as UND exceptions) when building
the kernel in Thumb2 mode:
- the conditional branch to vfp_kmode_exception in vfp_support_entry()
may be out of range for its target, depending on how the linker decides
to arrange the sections;
- when the UND exception is taken in kernel mode, the emulation handling
logic is entered via the 'call_fpe' label, which means we end up using
the wrong value/mask pairs to match and detect the NEON opcodes.
Since UND exceptions in kernel mode are unlikely to occur on a hot path
(as opposed to the user mode version which is invoked for VFP support
code and lazy restore), we can use the existing undef hook machinery for
any kernel mode instruction emulation that is needed, including calling
the existing vfp_kmode_exception() routine for unexpected cases. So drop
the call to call_fpe, and instead, install an undef hook that will get
called for NEON and VFP instructions that trigger an UND exception in
kernel mode.
While at it, make sure that the PC correction is accurate for the
execution mode where the exception was taken, by checking the PSR
Thumb bit.
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Fixes: eff8728fe6 ("vmlinux.lds.h: Add PGO and AutoFDO input sections")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch replaces 6 IWMMXT instructions Clang's integrated assembler
does not support in iwmmxt.S using macros, while making sure GNU
assembler still emit the same instructions. This should be easier than
providing full IWMMXT support in Clang. This is one of the last bits of
kernel code that could be compiled but not assembled with clang. Once
all of it works with IAS, we no longer need to special-case 32-bit Arm
in Kbuild, or turn off CONFIG_IWMMXT when build-testing.
"Intel Wireless MMX Technology - Developer Guide - August, 2002" should
be referenced for the encoding schemes of these extensions.
Link: https://github.com/ClangBuiltLinux/linux/issues/975
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jian Cai <jiancai@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
KASAN uses the routines in stacktrace.c to capture the call stack each
time memory gets allocated or freed. Some of these routines are also
used to log CPU and memory context when exceptions are taken, and so
in some cases, memory accesses may be made that are not strictly in
line with the KASAN constraints, and may therefore trigger false KASAN
positives.
So follow the example set by other architectures, and simply disable
KASAN instrumentation for these routines.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
As "u64" is equivalent to "unsigned long long", there is no need to cast
a "u64" parameter for printing it using the "0x%08llx" format specifier.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit d6d51a96c7 ("ARM: 9014/2: Replace string mem* functions for
KASan") add .weak directives to memcpy/memmove/memset to avoid collision
with KASAN interceptors.
This does not work with LLVM's integrated assembler (the assembly snippet
`.weak memcpy ... .globl memcpy` produces a STB_GLOBAL memcpy while GNU as
produces a STB_WEAK memcpy). LLVM 12 (since https://reviews.llvm.org/D90108)
will error on such an overridden symbol binding.
Use the appropriate WEAK macro instead.
Link: https://github.com/ClangBuiltLinux/linux/issues/1190
--
Fixes: d6d51a96c7 ("ARM: 9014/2: Replace string mem* functions for KASan")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit
149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region")
created a permanent, read-only section mapping of the device tree blob
provided by the firmware, and added a set of macros to get the base and
size of the virtually mapped FDT based on the physical address. However,
while the mapping code uses the SECTION_SIZE macro correctly, the macros
use PMD_SIZE instead, which means something entirely different on ARM when
using short descriptors, and is therefore not the right quantity to use
here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names
of the macro and its parameter to clarify that it returns the virtual
address of the start of the FDT, based on the physical address in memory.
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch initializes KASan shadow region's page table and memory.
There are two stage for KASan initializing:
1. At early boot stage the whole shadow region is mapped to just
one physical page (kasan_zero_page). It is finished by the function
kasan_early_init which is called by __mmap_switched(arch/arm/kernel/
head-common.S)
2. After the calling of paging_init, we use kasan_zero_page as zero
shadow for some memory that KASan does not need to track, and we
allocate a new shadow space for the other memory that KASan need to
track. These issues are finished by the function kasan_init which is
call by setup_arch.
When using KASan we also need to increase the THREAD_SIZE_ORDER
from 1 to 2 as the extra calls for shadow memory uses quite a bit
of stack.
As we need to make a temporary copy of the PGD when setting up
shadow memory we create a helpful PGD_SIZE definition for both
LPAE and non-LPAE setups.
The KASan core code unconditionally calls pud_populate() so this
needs to be changed from BUG() to do {} while (0) when building
with KASan enabled.
After the initial development by Andre Ryabinin several modifications
have been made to this code:
Abbott Liu <liuwenliang@huawei.com>
- Add support ARM LPAE: If LPAE is enabled, KASan shadow region's
mapping table need be copied in the pgd_alloc() function.
- Change kasan_pte_populate,kasan_pmd_populate,kasan_pud_populate,
kasan_pgd_populate from .meminit.text section to .init.text section.
Reported by Florian Fainelli <f.fainelli@gmail.com>
Linus Walleij <linus.walleij@linaro.org>:
- Drop the custom mainpulation of TTBR0 and just use
cpu_switch_mm() to switch the pgd table.
- Adopt to handle 4th level page tabel folding.
- Rewrite the entire page directory and page entry initialization
sequence to be recursive based on ARM64:s kasan_init.c.
Ard Biesheuvel <ardb@kernel.org>:
- Necessary underlying fixes.
- Crucial bug fixes to the memory set-up code.
Co-developed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Co-developed-by: Abbott Liu <liuwenliang@huawei.com>
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Define KASAN_SHADOW_OFFSET,KASAN_SHADOW_START and KASAN_SHADOW_END for
the Arm kernel address sanitizer. We are "stealing" lowmem (the 4GB
addressable by a 32bit architecture) out of the virtual address
space to use as shadow memory for KASan as follows:
+----+ 0xffffffff
| |
| | |-> Static kernel image (vmlinux) BSS and page table
| |/
+----+ PAGE_OFFSET
| |
| | |-> Loadable kernel modules virtual address space area
| |/
+----+ MODULES_VADDR = KASAN_SHADOW_END
| |
| | |-> The shadow area of kernel virtual address.
| |/
+----+-> TASK_SIZE (start of kernel space) = KASAN_SHADOW_START the
| | shadow address of MODULES_VADDR
| | |
| | |
| | |-> The user space area in lowmem. The kernel address
| | | sanitizer do not use this space, nor does it map it.
| | |
| | |
| | |
| | |
| |/
------ 0
0 .. TASK_SIZE is the memory that can be used by shared
userspace/kernelspace. It us used for userspace processes and for
passing parameters and memory buffers in system calls etc. We do not
need to shadow this area.
KASAN_SHADOW_START:
This value begins with the MODULE_VADDR's shadow address. It is the
start of kernel virtual space. Since we have modules to load, we need
to cover also that area with shadow memory so we can find memory
bugs in modules.
KASAN_SHADOW_END
This value is the 0x100000000's shadow address: the mapping that would
be after the end of the kernel memory at 0xffffffff. It is the end of
kernel address sanitizer shadow area. It is also the start of the
module area.
KASAN_SHADOW_OFFSET:
This value is used to map an address to the corresponding shadow
address by the following formula:
shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;
As you would expect, >> 3 is equal to dividing by 8, meaning each
byte in the shadow memory covers 8 bytes of kernel memory, so one
bit shadow memory per byte of kernel memory is used.
The KASAN_SHADOW_OFFSET is provided in a Kconfig option depending
on the VMSPLIT layout of the system: the kernel and userspace can
split up lowmem in different ways according to needs, so we calculate
the shadow offset depending on this.
When kasan is enabled, the definition of TASK_SIZE is not an 8-bit
rotated constant, so we need to modify the TASK_SIZE access code in the
*.s file.
The kernel and modules may use different amounts of memory,
according to the VMSPLIT configuration, which in turn
determines the PAGE_OFFSET.
We use the following KASAN_SHADOW_OFFSETs depending on how the
virtual memory is split up:
- 0x1f000000 if we have 1G userspace / 3G kernelspace split:
- The kernel address space is 3G (0xc0000000)
- PAGE_OFFSET is then set to 0x40000000 so the kernel static
image (vmlinux) uses addresses 0x40000000 .. 0xffffffff
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0x3f000000
so the modules use addresses 0x3f000000 .. 0x3fffffff
- So the addresses 0x3f000000 .. 0xffffffff need to be
covered with shadow memory. That is 0xc1000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x18200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0x26e00000, to
KASAN_SHADOW_END at 0x3effffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0x3f000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0x26e00000 = (0x3f000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0x26e00000 - (0x3f000000 >> 3)
KASAN_SHADOW_OFFSET = 0x26e00000 - 0x07e00000
KASAN_SHADOW_OFFSET = 0x1f000000
- 0x5f000000 if we have 2G userspace / 2G kernelspace split:
- The kernel space is 2G (0x80000000)
- PAGE_OFFSET is set to 0x80000000 so the kernel static
image uses 0x80000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0x7f000000
so the modules use addresses 0x7f000000 .. 0x7fffffff
- So the addresses 0x7f000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x81000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x10200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0x6ee00000, to
KASAN_SHADOW_END at 0x7effffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0x7f000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0x6ee00000 = (0x7f000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0x6ee00000 - (0x7f000000 >> 3)
KASAN_SHADOW_OFFSET = 0x6ee00000 - 0x0fe00000
KASAN_SHADOW_OFFSET = 0x5f000000
- 0x9f000000 if we have 3G userspace / 1G kernelspace split,
and this is the default split for ARM:
- The kernel address space is 1GB (0x40000000)
- PAGE_OFFSET is set to 0xc0000000 so the kernel static
image uses 0xc0000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0xbf000000
so the modules use addresses 0xbf000000 .. 0xbfffffff
- So the addresses 0xbf000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x41000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x08200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0xb6e00000, to
KASAN_SHADOW_END at 0xbfffffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0xbf000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0xb6e00000 = (0xbf000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0xb6e00000 - (0xbf000000 >> 3)
KASAN_SHADOW_OFFSET = 0xb6e00000 - 0x17e00000
KASAN_SHADOW_OFFSET = 0x9f000000
- 0x8f000000 if we have 3G userspace / 1G kernelspace with
full 1 GB low memory (VMSPLIT_3G_OPT):
- The kernel address space is 1GB (0x40000000)
- PAGE_OFFSET is set to 0xb0000000 so the kernel static
image uses 0xb0000000 .. 0xffffffff.
- On top of that we have the MODULES_VADDR which under
the worst case (using ARM instructions) is
PAGE_OFFSET - 16M (0x01000000) = 0xaf000000
so the modules use addresses 0xaf000000 .. 0xaffffff
- So the addresses 0xaf000000 .. 0xffffffff need to be
covered with shadow memory. That is 0x51000000 bytes
of memory.
- 1/8 of that is needed for its shadow memory, so
0x0a200000 bytes of shadow memory is needed. We
"steal" that from the remaining lowmem.
- The KASAN_SHADOW_START becomes 0xa4e00000, to
KASAN_SHADOW_END at 0xaeffffff.
- Now we can calculate the KASAN_SHADOW_OFFSET for any
kernel address as 0xaf000000 needs to map to the first
byte of shadow memory and 0xffffffff needs to map to
the last byte of shadow memory. Since:
SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET
0xa4e00000 = (0xaf000000 >> 3) + KASAN_SHADOW_OFFSET
KASAN_SHADOW_OFFSET = 0xa4e00000 - (0xaf000000 >> 3)
KASAN_SHADOW_OFFSET = 0xa4e00000 - 0x15e00000
KASAN_SHADOW_OFFSET = 0x8f000000
- The default value of 0xffffffff for KASAN_SHADOW_OFFSET
is an error value. We should always match one of the
above shadow offsets.
When we do this, TASK_SIZE will sometimes get a bit odd values
that will not fit into immediate mov assembly instructions.
To account for this, we need to rewrite some assembly using
TASK_SIZE like this:
- mov r1, #TASK_SIZE
+ ldr r1, =TASK_SIZE
or
- cmp r4, #TASK_SIZE
+ ldr r0, =TASK_SIZE
+ cmp r4, r0
this is done to avoid the immediate #TASK_SIZE that need to
fit into a limited number of bits.
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Functions like memset()/memmove()/memcpy() do a lot of memory
accesses.
If a bad pointer is passed to one of these functions it is important
to catch this. Compiler instrumentation cannot do this since these
functions are written in assembly.
KASan replaces these memory functions with instrumented variants.
The original functions are declared as weak symbols so that
the strong definitions in mm/kasan/kasan.c can replace them.
The original functions have aliases with a '__' prefix in their
name, so we can call the non-instrumented variant if needed.
We must use __memcpy()/__memset() in place of memcpy()/memset()
when we copy .data to RAM and when we clear .bss, because
kasan_early_init cannot be called before the initialization of
.data and .bss.
For the kernel compression and EFI libstub's custom string
libraries we need a special quirk: even if these are built
without KASan enabled, they rely on the global headers for their
custom string libraries, which means that e.g. memcpy()
will be defined to __memcpy() and we get link failures.
Since these implementations are written i C rather than
assembly we use e.g. __alias(memcpy) to redirected any
users back to the local implementation.
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Disable instrumentation for arch/arm/boot/compressed/*
since that code is executed before the kernel has even
set up its mappings and definately out of scope for
KASan.
Disable instrumentation of arch/arm/vdso/* because that code
is not linked with the kernel image, so the KASan management
code would fail to link.
Disable instrumentation of arch/arm/mm/physaddr.c. See commit
ec6d06efb0 ("arm64: Add support for CONFIG_DEBUG_VIRTUAL")
for more details.
Disable kasan check in the function unwind_pop_register because
it does not matter that kasan checks failed when unwind_pop_register()
reads the stack memory of a task.
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kasan-dev@googlegroups.com
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G
Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Abbott Liu <liuwenliang@huawei.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
On ARM, setting up the linear region is tricky, given the constraints
around placement and alignment of the memblocks, and how the kernel
itself as well as the DT are placed in physical memory.
Let's simplify matters a bit, by moving the device tree mapping to the
top of the address space, right between the end of the vmalloc region
and the start of the the fixmap region, and create a read-only mapping
for it that is independent of the size of the linear region, and how it
is organized.
Since this region was formerly used as a guard region, which will now be
populated fully on LPAE builds by this read-only mapping (which will
still be able to function as a guard region for stray writes), bump the
start of the [underutilized] fixmap region by 512 KB as well, to ensure
that there is always a proper guard region here. Doing so still leaves
ample room for the fixmap space, even with NR_CPUS set to its maximum
value of 32.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Before moving the DT mapping out of the linear region, let's prepare
for this change by removing all the phys-to-virt translations of the
__atags_pointer variable, and perform this translation only once at
setup time.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace". So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 453431a549 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer fixes from Thomas Gleixner:
"A time namespace fix and a matching selftest. The futex absolute
timeouts which are based on CLOCK_MONOTONIC require time namespace
corrected. This was missed in the original time namesapce support"
* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/timens: Add a test for futex()
futex: Adjust absolute futex timeouts with per time namespace offset
Pull scheduler fixes from Thomas Gleixner:
"Two scheduler fixes:
- A trivial build fix for sched_feat() to compile correctly with
CONFIG_JUMP_LABEL=n
- Replace a zero lenght array with a flexible array"
* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/features: Fix !CONFIG_JUMP_LABEL case
sched: Replace zero-length array with flexible-array
Pull perf fix from Thomas Gleixner:
"A single fix to compute the field offset of the SNOOPX bit in the data
source bitmask of perf events correctly"
* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: correct SNOOPX field offset
Pull locking fix from Thomas Gleixner:
"Just a trivial fix for kernel-doc warnings"
* tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/seqlocks: Fix kernel-doc warnings
Pull NTB fixes from Jon Mason.
* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
NTB: Use struct_size() helper in devm_kzalloc()
ntb: intel: Fix memleak in intel_ntb_pci_probe
NTB: hw: amd: fix an issue about leak system resources
Pull i2c fix from Wolfram Sang:
"Regression fix for rc1 and stable kernels as well"
* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
Pull more cifs updates from Steve French:
"Add support for stat of various special file types (WSL reparse points
for char, block, fifo)"
* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb3: add some missing definitions from MS-FSCC
smb3: remove two unused variables
smb3: add support for stat of WSL reparse points for special file types
Pull more parisc updates from Helge Deller:
- During this merge window O_NONBLOCK was changed to become 000200000,
but we missed that the syscalls timerfd_create(), signalfd4(),
eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
bit-wise check of the flags parameter.
To provide backward compatibility with existing userspace we
introduce parisc specific wrappers for those syscalls which filter
out the old O_NONBLOCK value and replaces it with the new one.
- Prevent HIL bus driver to get stuck when keyboard or mouse isn't
attached
- Improve error return codes when setting rtc time
- Minor documentation fix in pata_ns87415.c
* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
ata: pata_ns87415.c: Document support on parisc with superio chip
parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
hil/parisc: Disable HIL driver when it gets stuck
parisc: Improve error return codes when setting rtc time
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
Pull SafeSetID updates from Micah Morton:
"The changes are mostly contained to within the SafeSetID LSM, with the
exception of a few 1-line changes to change some ns_capable() calls to
ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that
is examined by SafeSetID code and nothing else in the kernel.
The changes to SafeSetID internally allow for setting up GID
transition security policies, as already existed for UIDs"
* tag 'safesetid-5.10' of git://github.com/micah-morton/linux:
LSM: SafeSetID: Fix warnings reported by test bot
LSM: SafeSetID: Add GID security policy handling
LSM: Signal to SafeSetID when setting group IDs
Pull random32 updates from Willy Tarreau:
"Make prandom_u32() less predictable.
This is the cleanup of the latest series of prandom_u32
experimentations consisting in using SipHash instead of Tausworthe to
produce the randoms used by the network stack.
The changes to the files were kept minimal, and the controversial
commit that used to take noise from the fast_pool (f227e3ec3b) was
reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is
fed from various sources of activities (networking, scheduling) to
perturb the SipHash state using fast, non-trivially predictable data,
instead of keeping it fully deterministic. The goal is essentially to
make any occasional memory leakage or brute-force attempt useless.
The resulting code was verified to be very slightly faster on x86_64
than what is was with the controversial commit above, though this
remains barely above measurement noise. It was also tested on i386 and
arm, and build- tested only on arm64"
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
* tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom:
random32: add a selftest for the prandom32 code
random32: add noise from network and scheduling activity
random32: make prandom_u32() output unpredictable
Commit 21653a4181 ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().
But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().
Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.
This fixes the Microsoft Surface Go 2 hanging at boot.
Fixes: 21653a4181 ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627
Reported-by: Rainer Finke <rainer@finke.cc>
Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Suggested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
- lightnvm out-of-bounds fix (Colin)
- SG allocation leak fix (Doug)
- rnbd fixes (Gioh, Guoqing, Jack)
- zone error translation fixes (Keith)
- kerneldoc markup fix (Mauro)
- zram lockdep fix (Peter)
- Kill unused io_context members (Yufen)
- NUMA memory allocation cleanup (Xianting)
- NBD config wakeup fix (Xiubo)
* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
block: blk-mq: fix a kernel-doc markup
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
null_blk: use zone status for max active/open
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
block: remove unused members for io_context
blk-mq: remove the calling of local_memory_node()
zram: Fix __zram_bvec_{read,write}() locking order
skd_main: remove unused including <linux/version.h>
sgl_alloc_order: fix memory leak
lightnvm: fix out-of-bounds write to array devices->info[]
...
Pull io_uring fixes from Jens Axboe:
- fsize was missed in previous unification of work flags
- Few fixes cleaning up the flags unification creds cases (Pavel)
- Fix NUMA affinities for completely unplugged/replugged node for io-wq
- Two fallout fixes from the set_fs changes. One local to io_uring, one
for the splice entry point that io_uring uses.
- Linked timeout fixes (Pavel)
- Removal of ->flush() ->files work-around that we don't need anymore
with referenced files (Pavel)
- Various cleanups (Pavel)
* tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block:
splice: change exported internal do_splice() helper to take kernel offset
io_uring: make loop_rw_iter() use original user supplied pointers
io_uring: remove req cancel in ->flush()
io-wq: re-set NUMA node affinities if CPUs come online
io_uring: don't reuse linked_timeout
io_uring: unify fsize with def->work_flags
io_uring: fix racy REQ_F_LINK_TIMEOUT clearing
io_uring: do poll's hash_node init in common code
io_uring: inline io_poll_task_handler()
io_uring: remove extra ->file check in poll prep
io_uring: make cached_cq_overflow non atomic_t
io_uring: inline io_fail_links()
io_uring: kill ref get/drop in personality init
io_uring: flags-based creds init in queue
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
Pull dma-mapping fixes from Christoph Hellwig:
- document the new dma_{alloc,free}_pages() API
- two fixups for the dma-mapping.h split
* tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: document dma_{alloc,free}_pages
dma-mapping: move more functions to dma-map-ops.h
ARM/sa1111: add a missing include of dma-map-ops.h
Pull KVM fixes from Paolo Bonzini:
"Two fixes for this merge window, and an unrelated bugfix for a host
hang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ioapic: break infinite recursion on lazy EOI
KVM: vmx: rename pi_init to avoid conflict with paride
KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 build
Pull x86 SEV-ES fixes from Borislav Petkov:
"Three fixes to SEV-ES to correct setting up the new early pagetable on
5-level paging machines, to always map boot_params and the kernel
cmdline, and disable stack protector for ../compressed/head{32,64}.c.
(Arvind Sankar)"
* tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Explicitly map boot_params and command line
x86/head/64: Disable stack protection for head$(BITS).o
x86/boot/64: Initialize 5-level paging variables earlier
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.
This patch restores the spirit of commit f227e3ec3b ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.
The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
