dts changes for omap variants for v5.4
Remove regulator-boot-off properties that we never had in the mainline
kernel so they won't do anything. We add stdout-path for gta04, and
make am335x-boneblue use am335x-osd335x-common.dtsi file.
* tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi
ARM: dts: gta04: define chosen/stdout-path
ARM: dts: omap3-n950-n9: Remove regulator-boot-off property
ARM: dts: am335x-cm-t335: Remove regulator-boot-off property
Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner DT changes for 5.4
Our usual pile of patches for the next release, which include mostly:
- More fixes thanks to the DT validation using the YAML bindings
- IR receiver support on the H6
- SPDIF support on the H6
- I2C Support on the H6
- CSI support on the A20
- RTC support on the H6
- New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC
* tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits)
arm64: dts: allwinner: orange-pi-3: Enable WiFi
ARM: dts: sunxi: Add missing watchdog clocks
ARM: dts: sunxi: Add missing watchdog interrupts
arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree
ARM: dts: sun7i: Add CSI0 controller
arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC
ARM: dts: v3s: Change the timers compatible
ARM: dts: h3: Change the timers compatible
ARM: dts: a83t: Change the timers compatible
ARM: dts: a23/a33: Change the timers compatible
ARM: dts: sun6i: Add missing timers interrupts
ARM: dts: sun5i: Add missing timers interrupts
ARM: dts: sun4i: Add missing timers interrupts
dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema
arm64: dts: allwinner: h6: Introduce Tanix TX6 board
dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
arm64: allwinner: h6: add I2C nodes
dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.
ARM: dts: sunxi: Add mdio bus sub-node to GMAC
...
Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: dts: Amlogic updates for v5.4
Highlights
- odroid-c1: use MAC address from efuse
- add VDD_EE regulator to several boards
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse
ARM: dts: meson8b: mxq: add the VDDEE regulator
ARM: dts: meson8b: odroidc1: add the VDDEE regulator
ARM: dts: meson8b: ec100: add the VDDEE regulator
ARM: dts: meson8b: add the PWM_D output pin
ARM: dts: meson8b: add ethernet fifo sizes
Link: https://lore.kernel.org/r/7hzhk3bi96.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PWM-Fan and nor-flash for the RockPro64, a better display mode for
the Kevin Chromebook and a new board the Leez P710 SBC.
* tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC
arm64: dts: rockchip: enable internal SPI flash for RockPro64.
arm64: dts: rockchip: Add PWM fan for RockPro64
arm64: dts: rockchip: Specify override mode for kevin panel
Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.org
Link: https://lore.kernel.org/r/2362486.gYoCZEsBuK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot more love for Veyron devices with cleanups in the display and wifi
areas and also a 100ms speedup as a delay isn't needed anymore.
New boards are Tiger and Fievel from the Veyron family and the Mecer Xtreme
Mini S6, which I think is the first consumer-grade rk3229-based device in
the kernel.
* tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: add device tree for Mecer Xtreme Mini S6
Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators"
ARM: dts: rockchip: Add pin names for rk3288-veyron fievel
ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger}
ARM: dts: rockchip: Cleanup style around assignment operator
ARM: dts: rockchip: add veyron-tiger board
ARM: dts: rockchip: add veyron-fievel board
dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-{fievel,tiger}
ARM: dts: rockchip: consolidate veyron panel and backlight settings
ARM: dts: rockchip: move rk3288-veryon display settings into a separate file
ARM: dts: rockchip: Limit WiFi TX power on rk3288-veyron-jerry
ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings
ARM: dts: rockchip: Specify rk3288-veyron-chromebook's display timings
Link: https://lore.kernel.org/r/1611583.rKl1eQBRh8@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.4
1. Add AHCI to Exynos5250,
2. Add camera and GPU power domains to Exynos5422,
3. Minor cleanup.
* tag 'samsung-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add CAM power domain to Exynos5422/5800
ARM: dts: exynos: Add G3D power domain to Exynos542x
ARM: dts: exynos: Move MSC power domain to the right (sorted) place
ARM: dts: exynos: Add port map to Exynos5250 AHCI node
ARM: dts: exynos: Use space after '=' in exynos4412-itop-scp-core
Link: https://lore.kernel.org/r/20190816163042.6604-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the compatibles for Kontron i.MX6UL N6310 SoM and boards.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document the compatible for ANV32E61W 64kb Serial SPI non-volatile SRAM.
Although it is a SRAM device, it can be accessed through EEPROM
interface. At least until there is no proper SRAM driver support for
it.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called
bcm43356 and can be used with the brcmfmac driver. The module is powered by
the two always on regulators (not AXP805).
WiFi uses a PG port with 1.8V voltage level signals. SoC needs to be
configured so that it sets up an 1.8V input bias on this port. This is done
by the pio driver by reading the vcc-pg-supply voltage.
You'll need a fw_bcm43456c5_ag.bin firmware file and nvram.txt
configuration that can be found in the Xulongs's repository for H6:
https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256
Mainline brcmfmac driver expects the firmware and nvram at the following
paths relative to the firmware directory:
brcm/brcmfmac43456-sdio.bin
brcm/brcmfmac43456-sdio.txt
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The watchdog has a clock on all our SoCs, but it wasn't always listed.
Add it to the devicetree where it's missing.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The watchdog has an interrupt on all our SoCs, but it wasn't always listed.
Add it to the devicetree where it's missing.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This patch adds RTC node and fixes the clock properties and nodes
to reflect the real clock tree.
The device nodes for the internal oscillator and osc32k are removed,
as these clocks are now provided by the RTC device. Clock references
are fixed accordingly, too.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The CSI controller embedded in the A20 can be supported by our new driver.
Let's add it to our DT.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In
addition, there are two variants without eMMC. One without eMMC and one with SPI
flash. This suggests the need for separate device tree for the three eMMC
variants.
This patch has been tested on A64-OLinuXino-1Ge16GW with Linux 5.0 from Debain.
Basic benchmarks using Flexible IO Tester show reasonable performance from the
eMMC.
eMMC - Random Write: 21.3MiB/s
eMMC - Sequential Write: 68.2MiB/s
SD Card - Random Write: 1690KiB/s
SD Card - Sequential Write: 11.0MiB/s
Changes:
v3: Separate dts for eMMC variants
v2: Fix descriptions for VCC and VCCQ
Link: 174953de1e
Signed-off-by: Martin Ayotte <martinayotte@gmail.com>
[sunil@medhas.org Fix descriptions for VCC and VCCQ, separate dts for eMMC]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested-by: Sunil Mohan Adapa <sunil@medhas.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In
addition, there are two variants without eMMC. One without eMMC and one with SPI
flash. This suggests the need for separate device tree for the three eMMC
variants.
Add new compatible string to the bindings documentation for the A64 OlinuXino
board variant with on-board eMMC.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Unlike the A10 that has 6 timers available, the v3s has only three, with only
three interrupts. Let's change the compatible to reflect that, and add the
missing interrupts.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Unlike the A10 that has 6 timers available, the H3 has only two, with only
two interrupts, just like the A23. Let's change the compatible to reflect
that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Unlike the A10 that has 6 timers available, the A83t has only two, with
only two interrupts, just like the A23. Let's change the compatible to
reflect that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Unlike the A10 that has 6 timers available, the A23 and A33 has only two,
with only two interrupts. Let's change the compatible to reflect that.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Allwinner SoCs have an embedded GPADC that is doing thermal reading as
well, supported in Linux, with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tanix TX6 is an Allwinner H6 based TV box, which supports:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 4GiB DDR3 RAM (3GiB useable)
- 100Mbps EMAC via AC200 EPHY
- Cdtech 47822BS Wifi/BT
- 2x USB 2.0 Host and 1x USB 3.0 Host
- HDMI port
- IR receiver
- 64GiB eMMC
- 5V/2A DC power supply
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add new Oranth Tanix TX6 board compatible string to the bindings
documentation.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Add device-tree nodes for i2c0 to i2c2, and also add relevant pinctrl
nodes.
Suggested-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner H6 have a mv64xxx i2c interface available to be used.
Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The DWMAC binding never supported having the Ethernet PHY node as a
direct child to the controller, nor did it support the "phy" property
as a way to specify which Ethernet PHY to use. What seemed to work
was simply the implementation ignoring the "phy" property and instead
probing all addresses on the MDIO bus and using the first available
one.
The recent switch from "phy" to "phy-handle" breaks the assumptions
of the implementation, and does not match what the binding requires.
The binding requires that if an MDIO bus is described, it shall be
a sub-node with the "snps,dwmac-mdio" compatible string.
Add a device node for the MDIO bus, and move the Ethernet PHY node
under it. Also fix up the #address-cells and #size-cells properties
where needed.
Fixes: de332de26d ("ARM: dts: sunxi: Switch from phy to phy-handle")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Beelink GS1 has a DDC I2C bus voltage shifter. This is actually missing
and video is limited to 1024x768 due to missing EDID information.
Add the DDC regulator in the device-tree.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Beelink GS1 board has a SPDIF out connector, so enable it in
the device-tree and add a simple SPDIF soundcard.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
