- Install i.MX6 PCI abort handler only when DT contains a PCI controller
claimed by the imx6 driver (H. Nikolaus Schaller)
* pci/controller/dwc:
PCI: imx6: Install the fault handler only on compatible match
- Wait longer for devices to become ready after resume (as we do for reset)
to accommodate Intel Titan Ridge xHCI devices (Mika Westerberg)
- Drop pci_bridge_wait_for_secondary_bus() timeout parameter since all
callers pass the same value (Mika Westerberg)
- Extend D3hot delay for NVIDIA HDA controllers to avoid unrecoverable
devices after a bus reset (Alex Williamson)
* pci/reset:
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
PCI/PM: Increase wait time after resume
- Use of_property_present(), instead of lower-level functions like
of_get_property(), for testing DT property presence (Rob Herring)
* pci/enumeration:
PCI: Use of_property_present() for testing DT property presence
- Work around Chromebook firmware issue that corrupts Extended Capability
list (including L1 PM Substates capability) on D3cold -> D0 transitions
(Ron Lee)
* pci/aspm:
PCI: Fix up L1SS capability for Intel Apollo Lake Root Port
- Remove unnecessary <linux/aer.h> includes (Bjorn Helgaas)
- Clear Device Status after EDR error recovery. Firmware collects EDR
error information, but the OS is responsible for clearing it (Kuppuswamy
Sathyanarayanan)
* pci/aer:
PCI/EDR: Add edr_handle_event() comments
PCI/EDR: Clear Device Status after EDR error recovery
efi/cper: Remove unnecessary aer.h include
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property()/of_find_property() functions for reading properties. As
part of this, convert of_get_property()/of_find_property() calls to the
recently added of_property_present() helper when we just want to test for
presence of a property and nothing more.
Link: https://lore.kernel.org/r/20230310144719.1544443-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # pcie-mediatek
Assignment of NVIDIA Ampere-based GPUs have seen a regression since the
below referenced commit, where the reduced D3hot transition delay appears
to introduce a small window where a D3hot->D0 transition followed by a bus
reset can wedge the device. The entire device is subsequently unavailable,
returning -1 on config space read and is unrecoverable without a host
reset.
This has been observed with RTX A2000 and A5000 GPU and audio functions
assigned to a Windows VM, where shutdown of the VM places the devices in
D3hot prior to vfio-pci performing a bus reset when userspace releases the
devices. The issue has roughly a 2-3% chance of occurring per shutdown.
Restoring the HDA controller d3hot_delay to the effective value before the
below commit has been shown to resolve the issue. NVIDIA confirms this
change should be safe for all of their HDA controllers.
Fixes: 3e347969a5 ("PCI/PM: Reduce D3hot delay with usleep_range()")
Link: https://lore.kernel.org/r/20230413194042.605768-1-alex.williamson@redhat.com
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tarun Gupta <targupta@nvidia.com>
Cc: Abhishek Sahu <abhsahu@nvidia.com>
Cc: Tarun Gupta <targupta@nvidia.com>
PCIe r6.0 sec 6.6.1 prescribes that a device must be able to respond to
config requests within 1.0 s (PCI_RESET_WAIT) after exiting conventional
reset and this same delay is prescribed when coming out of D3cold (as that
involves reset too).
A device that requires more than 1 second to initialize after reset may
respond to config requests with Request Retry Status completions (sec
2.3.1), and we accommodate that in Linux with a 60 second cap
(PCIE_RESET_READY_POLL_MS).
Previously we waited up to PCIE_RESET_READY_POLL_MS only in the reset code
path, not in the resume path. However, a device has surfaced, namely Intel
Titan Ridge xHCI, which requires a longer delay also in the resume code
path.
Make the resume code path to use this same extended delay as the reset
path.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216728
Link: https://lore.kernel.org/r/20230404052714.51315-2-mika.westerberg@linux.intel.com
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
In 2013, commits
2e35afaefe ("PCI: pciehp: Add reset_slot() method")
608c388122 ("PCI: Add slot reset option to pci_dev_reset()")
amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset. The reset thus no longer causes gratuitous slot
bringdown and bringup.
However the commits neglected to serialize reset with code paths reading
slot registers. For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.
In 2018, commit
5b3f7b7d06 ("PCI: pciehp: Avoid slot access during reset")
retrofitted the missing locking. It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.
Unfortunately the locking turns out to be overzealous: reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.
Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held. A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.
Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):
pciehp_ist() # down_read(reset_lock)
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
__pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()
pci_stop_and_remove_bus_device()
pci_stop_bus_device()
pci_stop_dev()
device_release_driver()
device_release_driver_internal()
__device_driver_lock() # device_lock()
SYS_munmap()
vfio_device_fops_release()
vfio_device_group_close()
vfio_device_close()
vfio_device_last_close()
vfio_pci_core_close_device()
vfio_pci_core_disable() # device_lock()
__pci_reset_function_locked()
pci_reset_bus_function()
pci_dev_reset_slot_function()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Ian May reports the same deadlock on simultaneous hot-removal and an
AER-induced Secondary Bus Reset:
aer_recover_work_func()
pcie_do_recovery()
aer_root_reset()
pci_bus_error_reset()
pci_slot_reset()
pci_slot_lock() # device_lock()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.
Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset. There's no need to additionally
protect it with the reset_lock. However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.
The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices. That would arguably be the
job of the PCI core, not the PCIe hotplug driver. After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.
Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement. But if the device is physically gone, those
accesses are pointless anyway. If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.
Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset. Otherwise
there should be no impact.
In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.
Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com
Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com
Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: 5b3f7b7d06 ("PCI: pciehp: Avoid slot access during reset")
Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de
Reported-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reported-by: Ian May <ian.may@canonical.com>
Reported-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reported-by: Rahul Kumar <rahul.kumar1@amd.com>
Reported-by: Jialin Zhang <zhangjialin11@huawei.com>
Tested-by: Anatoli Antonovitch <Anatoli.Antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Dan Stein <dstein@hpe.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Alex Michon <amichon@kalrayinc.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
During EDR recovery, the OS must clear error status of the port that
triggered DPC even if firmware retains control of DPC and AER (see the
implementation note in the PCI Firmware spec r3.3, sec 4.6.12).
Prior to 068c29a248 ("PCI/ERR: Clear PCIe Device Status errors only if
OS owns AER"), the port Device Status was cleared in this path:
edr_handle_event
dpc_process_error(dev) # "dev" triggered DPC
pcie_do_recovery(dev, dpc_reset_link)
dpc_reset_link # exit DPC
pcie_clear_device_status(dev) # clear Device Status
After 068c29a248, pcie_do_recovery() no longer clears Device Status when
firmware controls AER, so the error bit remains set even after recovery.
Per the "Downstream Port Containment configuration control" bit in the
returned _OSC Control Field (sec 4.5.1), the OS is allowed to clear error
status until it evaluates _OST, so clear Device Status in
edr_handle_event() if the error recovery was successful.
[bhelgaas: commit log]
Fixes: 068c29a248 ("PCI/ERR: Clear PCIe Device Status errors only if OS owns AER")
Link: https://lore.kernel.org/r/20230315235449.1279209-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reported-by: Tsaur Erwin <erwin.tsaur@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Restruct i.MX PCIe schema, derive the common properties, thus they can
be shared by both the RC and Endpoint schema.
Update the description of fsl,imx6q-pcie.yaml, and move the EP mode
compatible to fsl,imx6q-pcie-ep.yaml.
Add support for i.MX8M PCIe Endpoint modes, and update the MAINTAINER
accordingly.
Link: https://lore.kernel.org/r/1676441915-1394-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
commit bb38919ec5 ("PCI: imx6: Add support for i.MX6 PCIe controller")
added a fault hook to this driver in the probe function. So it was only
installed if needed.
commit bde4a5a00e ("PCI: imx6: Allow probe deferral by reset GPIO")
moved it from probe to driver init which installs the hook unconditionally
as soon as the driver is compiled into a kernel.
When this driver is compiled as a module, the hook is not registered
until after the driver has been matched with a .compatible and
loaded.
commit 415b6185c5 ("PCI: imx6: Fix config read timeout handling")
extended the fault handling code.
commit 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
added some protection for non-ARM architectures, but this does not
protect non-i.MX ARM architectures.
Since fault handlers can be triggered on any architecture for different
reasons, there is no guarantee that they will be triggered only for the
assumed situation, leading to improper error handling (i.MX6-specific
imx6q_pcie_abort_handler) on foreign systems.
I had seen strange L3 imprecise external abort messages several times on
OMAP4 and OMAP5 devices and couldn't make sense of them until I realized
they were related to this unused imx6q driver because I had
CONFIG_PCI_IMX6=y.
Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed
to run on different ARM SoC and be differentiated only by device tree
binaries. So turning off CONFIG_PCI_IMX6 is not a solution.
Therefore we check the compatible in the init function before registering
the fault handler.
Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com
Fixes: bde4a5a00e ("PCI: imx6: Allow probe deferral by reset GPIO")
Fixes: 415b6185c5 ("PCI: imx6: Fix config read timeout handling")
Fixes: 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Commit aa47a7c215 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull crypto fix from Herbert Xu:
"Fix a regression in the caam driver"
* tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - Fix edesc/iv ordering mixup
Pull x86 updates from Thomas Gleixner:
"A small set of updates for x86:
- Return -EIO instead of success when the certificate buffer for SEV
guests is not large enough
- Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
on return to userspace for performance reasons, but the leaves user
space vulnerable to cross-thread attacks which STIBP prevents.
Update the documentation accordingly"
* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt/sev-guest: Return -EIO if certificate buffer is not large enough
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
x86/speculation: Allow enabling STIBP with legacy IBRS
Pull irq updates from Thomas Gleixner:
"A set of updates for the interrupt susbsystem:
- Prevent possible NULL pointer derefences in
irq_data_get_affinity_mask() and irq_domain_create_hierarchy()
- Take the per device MSI lock before invoking code which relies on
it being hold
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted
to use core infrastructure and results in a fals positive warning
- Remove dead code in the MSI subsystem
- Clarify the documentation for pci_msix_free_irq()
- More kobj_type constification"
* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
genirq/msi: Drop dead domain name assignment
irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
genirq/irqdesc: Make kobj_type structures constant
PCI/MSI: Clarify usage of pci_msix_free_irq()
genirq/msi: Take the per-device MSI lock before validating the control structure
genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
Pull vfs update from Al Viro:
"Adding Christian Brauner as VFS co-maintainer"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Adding VFS co-maintainer
Pull VM_FAULT_RETRY fixes from Al Viro:
"Some of the page fault handlers do not deal with the following case
correctly:
- handle_mm_fault() has returned VM_FAULT_RETRY
- there is a pending fatal signal
- fault had happened in kernel mode
Correct action in such case is not "return unconditionally" - fatal
signals are handled only upon return to userland and something like
copy_to_user() would end up retrying the faulting instruction and
triggering the same fault again and again.
What we need to do in such case is to make the caller to treat that as
failed uaccess attempt - handle exception if there is an exception
handler for faulting instruction or oops if there isn't one.
Over the years some architectures had been fixed and now are handling
that case properly; some still do not. This series should fix the
remaining ones.
Status:
- m68k, riscv, hexagon, parisc: tested/acked by maintainers.
- alpha, sparc32, sparc64: tested locally - bug has been reproduced
on the unpatched kernel and verified to be fixed by this series.
- ia64, microblaze, nios2, openrisc: build, but otherwise completely
untested"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
openrisc: fix livelock in uaccess
nios2: fix livelock in uaccess
microblaze: fix livelock in uaccess
ia64: fix livelock in uaccess
sparc: fix livelock in uaccess
alpha: fix livelock in uaccess
parisc: fix livelock in uaccess
hexagon: fix livelock in uaccess
riscv: fix livelock in uaccess
m68k: fix livelock in uaccess
include/linux/compiler-intel.h had no update in the past 3 years.
We often forget about the third C compiler to build the kernel.
For example, commit a0a12c3ed0 ("asm goto: eradicate CC_HAS_ASM_GOTO")
only mentioned GCC and Clang.
init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC,
and nobody has reported any issue.
I guess the Intel Compiler support is broken, and nobody is caring
about it.
Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is
deprecated:
$ icc -v
icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
deprecated and will be removed from product release in the second half
of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
compiler moving forward. Please transition to use this compiler. Use
'-diag-disable=10441' to disable this message.
icc version 2021.7.0 (gcc version 12.1.0 compatibility)
Arnd Bergmann provided a link to the article, "Intel C/C++ compilers
complete adoption of LLVM".
lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept
untouched for better sync with https://github.com/facebook/zstd
Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more i2c updates from Wolfram Sang:
"Some improvements/fixes for the newly added GXP driver and a Kconfig
dependency fix"
* tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: gxp: fix an error code in probe
i2c: gxp: return proper error on address NACK
i2c: gxp: remove "empty" switch statement
i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio. That
all works fine, but gcc does complain about the pointer type mis-use:
mm/migrate.c: In function ‘__migrate_folio_extract’:
mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’
1050 | *anon_vmap = (void *)dst->mapping;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.
This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.
Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.
IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.
[ Side note: there are valid cases where we convert pointers to other
pointer types, notably the whole "folio vs page" situation, where the
types actually have fundamental commonalities.
The fact that the gcc note is limited to just randomized structures
means that we don't see equivalent warnings for those cases, but it
migth also mean that we miss other cases where we do play these kinds
of dodgy games, and this kind of explicit conversion might be a good
idea. ]
I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.
Fixes: 64c8902ed4 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc fixes from Andrew Morton:
"17 hotfixes.
Eight are for MM and seven are for other parts of the kernel. Seven
are cc:stable and eight address post-6.3 issues or were judged
unsuitable for -stable backporting"
* tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: map Dikshita Agarwal's old address to his current one
mailmap: map Vikash Garodia's old address to his current one
fs/cramfs/inode.c: initialize file_ra_state
fs: hfsplus: fix UAF issue in hfsplus_put_super
panic: fix the panic_print NMI backtrace setting
lib: parser: update documentation for match_NUMBER functions
kasan, x86: don't rename memintrinsics in uninstrumented files
kasan: test: fix test for new meminstrinsic instrumentation
kasan: treat meminstrinsic as builtins in uninstrumented files
kasan: emit different calls for instrumentable memintrinsics
ocfs2: fix non-auto defrag path not working issue
ocfs2: fix defrag path triggering jbd2 ASSERT
mailmap: map Georgi Djakov's old Linaro address to his current one
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH
mm/damon/paddr: fix missing folio_put()
mm/mremap: fix dup_anon_vma() in vma_merge() case 4
Pull powerpc fixes from Michael Ellerman:
- Drop orphaned VAS MAINTAINERS entry
- Fix build errors with clang and KCSAN
- Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together
with recordmcount
Thanks to Nathan Chancellor.
* tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Avoid dead code/data elimination when using recordmcount
powerpc/vmlinux.lds: Add .text.asan/tsan sections
powerpc: Drop orphaned VAS MAINTAINERS entry
Pull sound fixes from Takashi Iwai:
"A collection of various small fixes that have been gathered since the
last PR.
The majority of changes are for ASoC, and there is a small change in
ASoC PCM core, but the rest are all for driver- specific fixes /
quirks / updates"
* tag 'sound-fix-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
ALSA: ice1712: Delete unreachable code in aureon_add_controls()
ALSA: ice1712: Do not left ice->gpio_mutex locked in aureon_add_controls()
ALSA: hda/realtek: Add quirk for HP EliteDesk 800 G6 Tower PC
ALSA: hda/realtek: Improve support for Dell Precision 3260
ASoC: mediatek: mt8195: add missing initialization
ASoC: mediatek: mt8188: add missing initialization
ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43)
ASoC: zl38060 add gpiolib dependency
ASoC: sam9g20ek: Disable capture unless building with microphone input
ASoC: mt8192: Fix range for sidetone positive gain
ASoC: mt8192: Report an error if when an invalid sidetone gain is written
ASoC: mt8192: Fix event generation for controls
ASoC: mt8192: Remove spammy log messages
ASoC: mchp-pdmc: fix poc noise at capture startup
ASoC: dt-bindings: sama7g5-pdmc: add microchip,startup-delay-us binding
ASoC: soc-pcm: add option to start DMA after DAI
ASoC: mt8183: Fix event generation for I2S DAI operations
ASoC: mt8183: Remove spammy logging from I2S DAI driver
ASoC: mt6358: Remove undefined HPx Mux enumeration values
ASoC: mt6358: Validate Wake on Voice 2 writes
...
Pull more power supply updates from Sebastian Reichel:
- Fix DT binding for Richtek RT9467
- Fix a NULL pointer check in the power-supply core
- Document meaning of absent "present" property
* tag 'for-v6.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
dt-bindings: power: supply: Revise Richtek RT9467 compatible name
ABI: testing: sysfs-class-power: Document absence of "present" property
power: supply: fix null pointer check order in __power_supply_register
Pull more cifs updates from Steve French:
- xfstest generic/208 fix (memory leak)
- minor netfs fix (to address smatch warning)
- a DFS fix for stable
- a reconnect race fix
- two multichannel fixes
- RDMA (smbdirect) fix
- two additional writeback fixes from David
* tag '6.3-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix memory leak in direct I/O
cifs: prevent data race in cifs_reconnect_tcon()
cifs: improve checking of DFS links over STATUS_OBJECT_NAME_INVALID
iov: Fix netfs_extract_user_to_sg()
cifs: Fix cifs_write_back_from_locked_folio()
cifs: reuse cifs_match_ipaddr for comparison of dstaddr too
cifs: match even the scope id for ipv6 addresses
cifs: Fix an uninitialised variable
cifs: Add some missing xas_retry() calls
The usermodehelper code uses two fake pointers for the two capability
cases: CAP_BSET for reading and writing 'usermodehelper_bset', and
CAP_PI to read and write 'usermodehelper_inheritable'.
This seems to be a completely unnecessary indirection, since we could
instead just use the pointers themselves, and never have to do any "if
this then that" kind of logic.
So just get rid of the fake pointer values, and use the real pointer
values instead.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull coccinelle updates from Julia Lawall:
"Changes in make coccicheck and improve a semantic patch
This makes a couple of changes in make coccicheck related to shell
commands.
It also updates the api/atomic_as_refcounter semantic patch to include
WARNING in the output message, as done in other cases"
* tag 'cocci-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: Use /usr/bin/env
scripts: coccicheck: Avoid warning about spurious escape
coccinelle: api/atomic_as_refcounter: include message type in output
Pull Rust fix from Miguel Ojeda:
"A single build error fix: there was a change during the merge window
to a C header parsed by the Rust bindings generator, introducing a
type that it does not handle well.
The fix tells the generator to treat the type as opaque (for now)"
* tag 'rust-fixes-6.3-rc1' of https://github.com/Rust-for-Linux/linux:
rust: bindgen: Add `alt_instr` as opaque type
Pull more SCSI updates from James Bottomley:
"Updates that missed the first pull, mostly because of needing more
soak time.
Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
enclosure services (ses) update (mostly bug fixes) and other minor bug
fixes and changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: zfcp: Trace when request remove fails after qdio send fails
scsi: zfcp: Change the type of all fsf request id fields and variables to u64
scsi: zfcp: Make the type for accessing request hashtable buckets size_t
scsi: ufs: core: Simplify ufshcd_execute_start_stop()
scsi: ufs: core: Rely on the block layer for setting RQF_PM
scsi: core: Extend struct scsi_exec_args
scsi: lpfc: Fix double word in comments
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
scsi: core: Fix a source code comment
scsi: cxgbi: Remove unneeded version.h include
scsi: qedi: Remove unneeded version.h include
scsi: mpi3mr: Remove unneeded version.h include
scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
scsi: mpi3mr: Use number of bits to manage bitmap sizes
scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
scsi: mpi3mr: Fix an issue found by KASAN
scsi: mpi3mr: Replace 1-element array with flex-array
scsi: ipr: Work around fortify-string warning
scsi: ipr: Make ipr_probe_ioa_part2() return void
...
This is passing IS_ERR() instead of PTR_ERR() so instead of an error
code it prints and returns the number 1.
Fixes: 4a55ed6f89 ("i2c: Add GXP SoC I2C Controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
