There was a recent update in the BSpec adding an extra step to the PLL
enable sequence, which is for programming the msgbus timer. Since we
also touch PHY registers during hw readout, let's do the programming
when starting a transaction rather than only when doing the PLL enable
sequence.
This might be the missing step that was causing the timeouts
that we have recently seen during C20 SRAM register programming
sequences. With this in place, we shouldn't need the logic to bump the
timer thresholds, since now we have a documented value that should be
set peform programming the registers. As such, let's also remove
intel_cx0_bus_check_and_bump_timer(), but keep the part that checks if
hardware really detected a timeout, which might be useful debugging
information.
v2:
- Use debug level instead of warning for the message notifying that
the hardware did not detect the timeout. (Mika)
- Got a new BSpec update clarifying that we need to program the msgbus
timer of both PHY lanes. Update the changes to reflect that.
(Gustavo)
BSpec: 64568
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912155923.39494-1-gustavo.sousa@intel.com
Populate connector->ddc, and thus create the "ddc" symlink
in sysfs for analog VGA connectors.
As a bonus we can replace a bunch of intel_gmbus_get_adapter()
lookups with just the connector->ddc pointer. Sadly one extra
lookup still remains due to the g4x DVI-I shenanigans. We could
perhaps consider borrowing the ddc proxy idea from SDVO to deal
with that in a perhaps nicer way, but can't really be bothered
right now at least. Also not sure exposing such a dual ddc bus
to userspace would be quite wise.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently drm_sysfs_connector_add() attempts to register
the "ddc" symlink (based one connector->ddc) before the
driver's .early_register() hook has been called. That is
too early for i915 which only fully registers the aux ch
and associated i2c bus from said hook (to prevent half
initialized stuff getting exposed to userspace). This
causes my attempt at using drm_connector_init_with_ddc()
to fail, and the entire connector disappears from sysfs
on account of sysfs_create_link() failing.
To fix that split the sysfs symlink stuff into separate
functions (drm_sysfs_connector_add_late() and
drm_sysfs_connector_remove_early()) which are called
on the opposite side of the .later_register() and
.early_unregister() hooks.
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
Apparently Acer Chromebook C740 (BDW-ULT) doesn't have the
eDP HPD line properly connected, and thus fails the new
HPD check during eDP probe. The result is that we lose the
eDP output.
I suspect all such machines would be Chromebooks or other
Linux exclusive systems as the Windows driver likely wouldn't
work either. I did check a few other BDW machines here and
those do have eDP HPD connected, one of them even is a
different Chromebook (Samus).
To account for these funky machines let's skip the HPD check when
it looks like the eDP port is the only one using that specific AUX
channel. In case of multiple ports sharing the same AUX CH (eg. on
Asrock B250M-HDV) we still do the check and thus should correctly
ignore the eDP port in favor of the other DP port (usually a DP->VGA
converter).
v2: Don't oops during list iteration
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9264
Fixes: cfe5bdfb27 ("drm/i915: Check HPD live state during eDP probe")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230908052527.685-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Pull drm ci scripts from Dave Airlie:
"This is a bunch of ci integration for the freedesktop gitlab instance
where we currently do upstream userspace testing on diverse sets of
GPU hardware. From my perspective I think it's an experiment worth
going with and seeing how the benefits/noise playout keeping these
files useful.
Ideally I'd like to get this so we can do pre-merge testing on PRs
eventually.
Below is some info from danvet on why we've ended up making the
decision and how we can roll it back if we decide it was a bad plan.
Why in upstream?
- like documentation, testcases, tools CI integration is one of these
things where you can waste endless amounts of time if you
accidentally have a version that doesn't match your source code
- but also like the above, there's a balance, this is the initial cut
of what we think makes sense to keep in sync vs out-of-tree,
probably needs adjustment
- gitlab supports out-of-repo gitlab integration and that's what's
been used for the kernel in drm, but it results in per-driver
fragmentation and lots of duplicated effort. the simple act of
smashing an arbitrary winner into a topic branch already started
surfacing patches on dri-devel and sparking good cross driver team
discussions
Why gitlab?
- it's not any more shit than any of the other CI
- drm userspace uses it extensively for everything in userspace, we
have a lot of people and experience with this, including
integration of hw testing labs
- media userspace like gstreamer is also on gitlab.fd.o, and there's
discussion to extend this to the media subsystem in some fashion
Can this be shared?
- there's definitely a pile of code that could move to scripts/ if
other subsystem adopt ci integration in upstream kernel git. other
bits are more drm/gpu specific like the igt-gpu-tests/tools
integration
- docker images can be run locally or in other CI runners
Will we regret this?
- it's all in one directory, intentionally, for easy deletion
- probably 1-2 years in upstream to see whether this is worth it or a
Big Mistake. that's roughly what it took to _really_ roll out solid
CI in the bigger userspace projects we have on gitlab.fd.o like
mesa3d"
* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
drm: ci: docs: fix build warning - add missing escape
drm: Add initial ci/ subdirectory
Pull x86 fixes from Ingo Molnar:
"Fix preemption delays in the SGX code, remove unnecessarily
UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
make the x86 SMP init code a bit more conservative to fix kexec()
lockups"
* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
x86/smp: Don't send INIT to non-present and non-booted CPUs
Pull x86 perf event fix from Ingo Molnar:
"Work around a firmware bug in the uncore PMU driver, affecting certain
Intel systems"
* tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Correct the number of CHAs on EMR
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.
The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it
fails.
We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.
- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.
One can generate the output and upload it to the web interface but
Anup also automated everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.
- Add 'perf test' entries to check the parsing of events
improvements.
- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in
'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.
- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.
- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.
- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.
- Update files for the power10 platform"
* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...
Pull smb client fixes from Steve French:
- six smb3 client fixes including ones to allow controlling smb3
directory caching timeout and limits, and one debugging improvement
- one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option)
- one minor spnego registry update
* tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
spnego: add missing OID to oid registry
smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU
cifs: update internal module version number for cifs.ko
smb3: allow controlling maximum number of cached directories
smb3: add trace point for queryfs (statfs)
nls: Hide new NLS_UCS2_UTILS
smb3: allow controlling length of time directory entries are cached with dir leases
smb: propagate error code of extract_sharename()
