Most of the vdo volume belongs to the slab depot. The depot contains a
collection of slabs. The slabs can be up to 32GB, and are divided into
three sections. Most of a slab consists of a linear sequence of 4K blocks.
These blocks are used either to store data, or to hold portions of the
block map (see subsequent patches). In addition to the data blocks, each
slab has a set of reference counters, using 1 byte for each data block.
Finally each slab has a journal. Reference updates are written to the slab
journal, which is written out one block at a time as each block fills. A
copy of the reference counters is kept in memory, and are written out a
block at a time, in oldest-dirtied-order whenever there is a need to
reclaim slab journal space. The journal is used both to ensure that the
main recovery journal (see subsequent patches) can regularly free up space,
and also to amortize the cost of updating individual reference blocks.
This patch adds the slab structure as well as the slab journal and
reference counters.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
When blocks do not deduplicate, vdo will attempt to compress them. Up to 14
compressed blocks may be packed into a single data block (this limitation
is imposed by the block map). The packer implements a simple best-fit
packing algorithm and also manages the formatting and writing of compressed
blocks when bins fill.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
In order to deduplicate concurrent writes of the same data (to different
locations), data_vios which are writing the same data are grouped together
in a "hash lock," named for and keyed by the hash of the data being
written. Each hash lock is assigned to a hash zone based on a portion of
its hash.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This patch adds support for handling incoming flush and/or FUA bios. Each
such bio is assigned to a struct vdo_flush. These are allocated as needed,
but there is always one kept in reserve in case allocations fail. In the
event of an allocation failure, bios may need to wait for an outstanding
flush to complete.
The logical address space is partitioned into logical zones, each handled
by its own thread. Each zone keeps a list of all data_vios handling write
requests for logical addresses in that zone. When a flush bio is processed,
each logical zone is informed of the flush. When all of the writes which
are in progress at the time of the notification have completed in all
zones, the flush bio is then allowed to complete.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This patch adds the admin_state structures which are used to track the
states of individual vdo components for handling of operations like suspend
and resume. It also adds the action manager which is used to schedule and
manage cross-thread administrative and internal operations.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The deduplication index interface for index clients includes the
deduplication request and index session structures. This is the interface
that the rest of the vdo target uses to make requests, receive responses,
and collect statistics.
This patch also adds sysfs nodes for inspecting various index properties at
runtime.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Co-developed-by: John Wiele <jwiele@redhat.com>
Signed-off-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The top-level deduplication index brings all the earlier components
together. The top-level index creates the separate zone structures that
enable the index to handle several requests in parallel, handles
dispatching requests to the right zones and components, and coordinates
metadata to ensure that it remain consistent. It also coordinates recovery
in the event of an unexpected index failure.
If sparse caching is enabled, the top-level index also handles the
coordination required by the sparse chapter index cache, which (unlike most
index structures) is shared among all zones.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Co-developed-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The volume store structures manage the reading and writing of chapter
pages. When a chapter is closed, it is packed into a read-only structure,
split across several pages, and written to storage.
The volume store also contains a cache and specialized queues that sort and
batch requests by the page they need, in order to minimize latency and I/O
requests when records have to be read from storage. The cache and queues
also coordinate with the volume index to ensure that the volume does not
waste resources reading pages that are no longer valid.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Co-developed-by: John Wiele <jwiele@redhat.com>
Signed-off-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Deduplication records are stored in groups called chapters. New records are
collected in a structure called the open chapter, which is optimized for
adding, removing, and sorting records.
When a chapter fills, it is packed into a read-only structure called a
closed chapter, which is optimized for searching and reading. The closed
chapter includes a delta index, called the chapter index, which maps each
record name to the record page containing the record and allows the index
to read at most one record page when looking up a record.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The volume index is a large delta index that maps each record name to the
chapter which contains the newest record for that name. The volume index
can contain several million records and is stored entirely in memory while
the index is operating, accounting for the majority of the deduplication
index's memory budget.
The volume index is composed of two subindexes in order to handle sparse
hook names separately from regular names. If sparse indexing is not
enabled, the sparse hook portion of the volume index is not used or
instantiated.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The delta index is a space and memory efficient alternative to a hashtable.
Instead of storing the entire key for each entry, the entries are sorted by
key and only the difference between adjacent keys (the delta) is stored.
If the keys are evenly distributed, the size of the deltas follows an
exponential distribution, and the deltas can use a Huffman code to take up
even less space.
This structure allows the index to use many fewer bytes per entry than a
traditional hash table, but it is slightly more expensive to look up
entries, because a request must read and sum every entry in a list of
deltas in order to find a given record. The delta index reduces this lookup
cost by splitting its key space into many sub-lists, each starting at a
fixed key value, so that each individual list is short.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This patch adds infrastructure for managing reads and writes to the
underlying storage layer for the deduplication index. The deduplication
index uses dm-bufio for all of its reads and writes, so part of this
infrastructure is managing the various dm-bufio clients required. It also
adds the buffered reader and buffered writer abstractions, which simplify
reading and writing metadata structures that span several blocks.
This patch also includes structures and utilities for encoding and decoding
all of the deduplication index metadata, collectively called the index
layout.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Co-developed-by: John Wiele <jwiele@redhat.com>
Signed-off-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This patch adds two hash maps, one keyed by integers, the other by
pointers, and also a priority heap. The integer map is used for locking of
logical and physical addresses. The pointer map is used for managing
concurrent writes of the same data, ensuring that those writes are
deduplicated. The priority heap is used to minimize the search time for
free blocks.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This patch adds funnel_queue, a mostly lock-free multi-producer,
single-consumer queue. It also adds the request queue used by the dm-vdo
deduplication index, and the work_queue used by the dm-vdo data store. Both
of these are built on top of funnel queue and are intended to support the
dispatching of many short-running tasks. The work_queue also supports
priorities. Finally, this patch adds vdo_completion, the structure which is
enqueued on work_queues.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Co-developed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Add definitions of constants defining the fixed parameters of a VDO
volume, and the default and maximum values of configurable or dynamic
parameters.
Add definitions of internal status codes used for internal
communication within the module and for logging.
Add definitions of types and structs used to manage the processing of
an I/O operation.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This patch adds standardized allocation macros and memory tracking tools to
track and report any allocated memory that is not freed. This makes it
easier to ensure that the vdo target does not leak memory.
This patch also adds utilities for controlling whether certain threads are
allowed to allocate memory, since memory allocation during certain critical
code sections can cause the vdo target to deadlock.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Signed-off-by: Thomas Jaskiewicz <tom@jaskiewicz.us>
Co-developed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
MurmurHash3 is a fast, non-cryptographic, 128-bit hash. It was originally
written by Austin Appleby and placed in the public domain. This version has
been modified to produce the same result on both big endian and little
endian processors, making it suitable for use in portable persistent data.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Co-developed-by: John Wiele <jwiele@redhat.com>
Signed-off-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
This adds the admin-guide documentation for dm-vdo.
vdo.rst is the guide to using dm-vdo. vdo-design is an overview of the
design of dm-vdo.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous bug fixes and cleanups in ext4's multi-block allocator
and extent handling code"
* tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
ext4: make ext4_map_blocks() distinguish delalloc only extent
ext4: add a hole extent entry in cache after punch
ext4: correct the hole length returned by ext4_map_blocks()
ext4: convert to exclusive lock while inserting delalloc extents
ext4: refactor ext4_da_map_blocks()
ext4: remove 'needed' in trace_ext4_discard_preallocations
ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations
ext4: remove unused return value of ext4_mb_release_group_pa
ext4: remove unused return value of ext4_mb_release_inode_pa
ext4: remove unused return value of ext4_mb_release
ext4: remove unused ext4_allocation_context::ac_groups_considered
ext4: remove unneeded return value of ext4_mb_release_context
ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*()
ext4: remove unused return value of __mb_check_buddy
ext4: mark the group block bitmap as corrupted before reporting an error
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks()
...
Pull smb client fixes from Steve French:
"Five smb3 client fixes, mostly multichannel related:
- four multichannel fixes including fix for channel allocation when
multiple inactive channels, fix for unneeded race in channel
deallocation, correct redundant channel scaling, and redundant
multichannel disabling scenarios
- add warning if max compound requests reached"
* tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: increase number of PDUs allowed in a compound request
cifs: failure to add channel on iface should bump up weight
cifs: do not search for channel if server is terminating
cifs: avoid redundant calls to disable multichannel
cifs: make sure that channel scaling is done only once
Pull xfs fixes from Chandan Babu:
- Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format
attribute fork
- Remove conditional compilation of realtime geometry validator
functions to prevent confusing error messages from being printed on
the console during the mount operation
* tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove conditional building of rt geometry validator functions
xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.8-rc3. They include:
- Android binder long-term bug with epoll finally being fixed
- fastrpc driver shutdown bugfix
- open-dice lockdep fix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: signal epoll threads of self-work
misc: open-dice: Fix spurious lockdep warning
misc: fastrpc: Mark all sessions as invalid in cb_remove
Pull tty and serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.8-rc3 that
resolve a number of reported issues. Included in here are:
- rs485 flag definition fix that affected the user/kernel abi in -rc1
- max310x driver fixes
- 8250_pci1xxxx driver off-by-one fix
- uart_tiocmget locking race fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: max310x: prevent infinite while() loop in port startup
serial: max310x: fail probe if clock crystal is unstable
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
serial: core: Fix atomicity violation in uart_tiocmget
serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data()
tty: serial: Fix bit order in RS485 flag definitions
Pull USB driver fixes from Greg KH:
"Here are a bunch of small USB driver fixes for 6.8-rc3. Included in
here are:
- new usb-serial driver ids
- new dwc3 driver id added
- typec driver change revert
- ncm gadget driver endian bugfix
- xhci bugfixes for a number of reported issues
- usb hub bugfix for alternate settings
- ulpi driver debugfs memory leak fix
- chipidea driver bugfix
- usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
USB: serial: cp210x: add ID for IMST iM871A-USB
usb: typec: tcpm: fix the PD disabled case
usb: ucsi_acpi: Quirk to ack a connector change ack cmd
usb: ucsi_acpi: Fix command completion handling
usb: ucsi: Add missing ppm_lock
usb: ulpi: Fix debugfs directory leak
Revert "usb: typec: tcpm: fix cc role at port reset"
usb: gadget: pch_udc: fix an Excess kernel-doc warning
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
usb: chipidea: core: handle power lost in workqueue
usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend
usb: dwc3: pci: add support for the Intel Arrow Lake-H
usb: core: Prevent null pointer dereference in update_port_device_state
xhci: handle isoc Babble and Buffer Overrun events properly
xhci: process isoc TD properly when there was a transaction error mid TD.
xhci: fix off by one check when adding a secondary interrupter.
xhci: fix possible null pointer dereference at secondary interrupter removal
...
Pull i2c fixlet from Wolfram Sang:
"MAINTAINERS update to point people to the new tree for i2c host driver
changes"
* tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Update i2c host drivers repository
Pull dmaengine fixes from Vinod Koul:
"Core:
- fix return value of is_slave_direction() for D2D dma
Driver fixes for:
- Documentaion fixes to resolve warnings for at_hdmac driver
- bunch of fsl driver fixes for memory leaks, and useless kfree
- TI edma and k3 fixes for packet error and null pointer checks"
* tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: add missing kernel-doc style description
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
dmaengine: fsl-qdma: Remove a useless devm_kfree()
dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA
dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA
dmaengine: ti: k3-udma: Report short packet errors
dmaengine: ti: edma: Add some null pointer checks to the edma_probe
dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools
dmaengine: at_hdmac: fix some kernel-doc warnings
Pull perf tools fixes from Arnaldo Carvalho de Melo:
"Vendor events:
- Intel Alderlake/Sapphire Rapids metric fixes, the CPU type
("cpu_atom", "cpu_core") needs to be used as a prefix to be
considered on a metric formula, detected via one of the 'perf test'
entries.
'perf test' fixes:
- Fix the creation of event selector lists on 'perf test' entries, by
initializing the sample ID flag, which is done by 'perf record', so
this fix affects only the tests, the common case isn't affected
- Make 'perf list' respect debug settings (-v) to fix its 'perf test'
entry
- Fix 'perf script' test when python support isn't enabled
- Special case 'perf script' tests on s390, where only DWARF call
graphs are supported and only on software events
- Make 'perf daemon' signal test less racy
Compiler warnings/errors:
- Remove needless malloc(0) call in 'perf top' that triggers
-Walloc-size
- Fix calloc() argument order to address error introduced in gcc-14
Build:
- Make minimal shellcheck version to v0.6.0, avoiding the build to
fail with older versions
Sync kernel header copies:
- stat.h to pick STATX_MNT_ID_UNIQUE
- msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING
- drm.h to pick DRM_IOCTL_MODE_CLOSEFB
- unistd.h to pick {list,stat}mount,
lsm_{[gs]et_self_attr,list_modules} syscall numbers
- x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes
- x86's mem{cpy,set}_64.S used in 'perf bench'
- Also, without tooling effects: asm-generic/unaligned.h, mount.h,
fcntl.h, kvm headers"
* tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits)
perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources
tools include UAPI: Sync linux/mount.h copy with the kernel sources
perf evlist: Fix evlist__new_default() for > 1 core PMU
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes
tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers
perf vendor events intel: Alderlake/sapphirerapids metric fixes
tools headers UAPI: Sync kvm headers with the kernel sources
perf tools: Fix calloc() arguments to address error introduced in gcc-14
perf top: Remove needless malloc(0) call that triggers -Walloc-size
perf build: Make minimal shellcheck version to v0.6.0
tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB
perf test shell daemon: Make signal test less racy
perf test shell script: Fix test for python being disabled
perf test: Workaround debug output in list test
perf list: Add output file option
perf list: Switch error message to pr_err() to respect debug settings (-v)
perf test: Fix 'perf script' tests on s390
tools headers UAPI: Sync linux/fcntl.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING
...
Pull tracing and eventfs fixes from Steven Rostedt:
- Fix the return code for ring_buffer_poll_wait()
It was returing a -EINVAL instead of EPOLLERR.
- Zero out the tracefs_inode so that all fields are initialized.
The ti->private could have had stale data, but instead of just
initializing it to NULL, clear out the entire structure when it is
allocated.
- Fix a crash in timerlat
The hrtimer was initialized at read and not open, but is canceled at
close. If the file was opened and never read the close will pass a
NULL pointer to hrtime_cancel().
- Rewrite of eventfs.
Linus wrote a patch series to remove the dentry references in the
eventfs_inode and to use ref counting and more of proper VFS
interfaces to make it work.
- Add warning to put_ei() if ei is not set to free. That means
something is about to free it when it shouldn't.
- Restructure the eventfs_inode to make it more compact, and remove the
unused llist field.
- Remove the fsnotify*() funtions for when the inodes were being
created in the lookup code. It doesn't make sense to notify about
creation just because something is being looked up.
- The inode hard link count was not accurate.
It was being updated when a file was looked up. The inodes of
directories were updating their parent inode hard link count every
time the inode was created. That means if memory reclaim cleaned a
stale directory inode and the inode was lookup up again, it would
increment the parent inode again as well. Al Viro said to just have
all eventfs directories have a hard link count of 1. That tells user
space not to trust it.
* tag 'trace-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Keep all directory links at 1
eventfs: Remove fsnotify*() functions from lookup()
eventfs: Restructure eventfs_inode structure to be more condensed
eventfs: Warn if an eventfs_inode is freed without is_freed being set
tracing/timerlat: Move hrtimer_init to timerlat_fd open()
eventfs: Get rid of dentry pointers without refcounts
eventfs: Clean up dentry ops and add revalidate function
eventfs: Remove unused d_parent pointer field
tracefs: dentry lookup crapectomy
tracefs: Avoid using the ei->dentry pointer unnecessarily
eventfs: Initialize the tracefs inode properly
tracefs: Zero out the tracefs_inode when allocating it
ring-buffer: Clean ring_buffer_poll_wait() error return
Pull gfs2 revert from Andreas Gruenbacher:
"It turns out that the commit to use GL_NOBLOCK flag for non-blocking
lookups has several issues, and not all of them have a simple fix"
* tag 'gfs2-v6.8-rc2-revert' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Use GL_NOBLOCK flag for non-blocking lookups"
Pull pci fixes from Bjorn Helgaas:
- Fix a potential deadlock that was reintroduced by an ASPM revert
merged for v6.8 (Johan Hovold)
- Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
Pieralisi)
* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
PCI/ASPM: Fix deadlock when enabling ASPM
Pul drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and xe. One nouveau fix is a
better fix for the deadlock and also helps with a sync race we were
seeing.
dma-buf:
- heaps CMA page accounting fix
virtio-gpu:
- fix segment size
xe:
- A crash fix
- A fix for an assert due to missing mem_acces ref
- Only allow a single user-fence per exec / bind.
- Some sparse warning fixes
- Two fixes for compilation failures on various odd combinations of
gcc / arch pointed out on LKML.
- Fix a fragile partial allocation pointed out on LKML.
- A sysfs ABI documentation warning fix
amdgpu:
- Fix reboot issue seen on some 7000 series dGPUs
- Fix client init order for KFD
- Misc display fixes
- USB-C fix
- DCN 3.5 fixes
- Fix issues with GPU scheduler and GPU reset
- GPU firmware loading fix
- Misc fixes
- GC 11.5 fix
- VCN 4.0.5 fix
- IH overflow fix
amdkfd:
- SVM fixes
- Trap handler fix
- Fix device permission lookup
- Properly reserve BO before validating it
nouveau:
- fence/irq lock deadlock fix (second attempt)
- gsp command size fix
* tag 'drm-fixes-2024-02-03' of git://anongit.freedesktop.org/drm/drm: (35 commits)
nouveau: offload fence uevents work to workqueue
nouveau/gsp: use correct size for registry rpc.
drm/amdgpu/pm: Use inline function for IP version check
drm/hwmon: Fix abi doc warnings
drm/xe: Make all GuC ABI shift values unsigned
drm/xe/vm: Subclass userptr vmas
drm/xe: Use LRC prefix rather than CTX prefix in lrc desc defines
drm/xe: Don't use __user error pointers
drm/xe: Annotate mcr_[un]lock()
drm/xe: Only allow 1 ufence per exec / bind IOCTL
drm/xe: Grab mem_access when disabling C6 on skip_guc_pc platforms
drm/xe: Fix crash in trace_dma_fence_init()
drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
drm/amdgpu: remove asymmetrical irq disabling in vcn 4.0.5 suspend
drm/amdgpu: drm/amdgpu: remove golden setting for gfx 11.5.0
drm/amdkfd: reserve the BO before validating it
drm/amdgpu: Fix missing error code in 'gmc_v6/7/8/9_0_hw_init()'
drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()'
drm/amd: Don't init MEC2 firmware when it fails to load
...
Pull input fixes from Dmitry Torokhov:
- a fix for the fix to deal with newer laptops which get confused by
the "GET ID" command when probing for PS/2 keyboards
- a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
laptops
- a change to bcm5974 to validate that the device has appropriate
endpoints
- an addition of new product ID to xpad driver to recognize Lenovo
Legion Go controllers
- a quirk to Goodix controller to deal with extra GPIO described in
ACPI tables on some devices.
* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
Input: bcm5974 - check endpoint type before starting traffic
Input: xpad - add Lenovo Legion Go controllers
Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0
Pull sound fixes from Takashi Iwai:
"A collection of fixes, mostly device-specific ones:
- Minor PCM core fix for name strings
- ASoC Qualcomm fixes, including DAI support extensions
- ASoC AMD platform updates
- ASoC Allwinner platform updates
- Various ASoC codec fixes for WSA, WCD, ES8326 drivers
- Various HD-audio and USB-audio fixes and quirks
- A series of fixes for Cirrus CS35L56 codecs"
* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
ALSA: usb-audio: Ignore clock selector errors for single connection
ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
ALSA: hda: cs35l56: Remove unused test stub function
ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
ALSA: hda: cs35l56: Fix filename string field layout
ALSA: hda: cs35l56: Fix order of searching for firmware files
ASoC: cs35l56: Allow more time for firmware to boot
ASoC: cs35l56: Load tunings for the correct speaker models
ASoC: cs35l56: Firmware file must match the version of preloaded firmware
ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
ASoC: cs35l56: Fix for initializing ASP1 mixer registers
ALSA: hda: cs35l56: Initialize all ASP1 registers
ASoC: cs35l56: Fix default SDW TX mixer registers
ASoC: cs35l56: Fix to ensure ASP1 registers match cache
ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
ASoC: cs35l56: Don't add the same register patch multiple times
ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
ASoC: wm_adsp: Don't overwrite fwf_name with the default
ASoC: wm_adsp: Fix firmware file search order
...
Pull power supply fix from Sebastian Reichel:
- qcom_battmgr: revert broken fix
* tag 'for-v6.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"
Pul iommu fixes from Joerg Roedel:
- Make iommu_ops->default_domain work without CONFIG_IOMMU_DMA to fix
initialization of FSL-PAMU devices
- Fix for Tegra fbdev initialization failure
- Fix for a VFIO device unbinding failure on PowerPC
* tag 'iommu-fixes-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
powerpc: iommu: Bring back table group release_ownership() call
drm/tegra: Do not assume that a NULL domain means no DMA IOMMU
iommu: Allow ops->default_domain to work when !CONFIG_IOMMU_DMA
Pull device mapper fixes from Mike Snitzer:
- Fix DM ioctl interface to avoid INT_MAX overflow warnings from
kvmalloc by limiting the number of targets and parameter size area.
- Fix DM stats to avoid INT_MAX overflow warnings from kvmalloc by
limiting the number of entries supported.
- Fix DM writecache to support mapping devices larger than 1 TiB by
switching from using kvmalloc_array to vmalloc_array -- which avoids
INT_MAX overflow in kvmalloc_node and associated warnings.
- Remove the (ab)use of tasklets from both the DM crypt and verity
targets. They will be converted to use BH workqueue in future.
* tag 'for-6.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt, dm-verity: disable tasklets
dm writecache: allow allocations larger than 2GiB
dm stats: limit the number of entries
dm: limit the number of targets and parameter size area
Pull ata fix from Niklas Cassel:
- Following up on last week's ASMedia ASM1061 43-bit dma_mask quirk, we
sent an email to ASMedia developers that have previously been active
on the mailing list, asking exactly which SATA controllers that are
affected by this hardware limitation.
We got a reply that it affects all the SATA controllers in the
ASM106x family, thus extend the existing 43-bit dma_mask quirk to
apply to all the affected ASMedia SATA controllers.
* tag 'ata-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts
Another Fujitsu-related patch.
In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.
So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Remove duplicated enums (Guixen)
- Use appropriate controller state accessors (Keith)
- Retryable authentication (Hannes)
- Add missing module descriptions (Chaitanya)
- Fibre-channel fixes for blktests (Daniel)
- Various type correctness updates (Caleb)
- Improve fabrics connection debugging prints (Nitin)
- Passthrough command verbose error logging (Adam)
- Fix for where we set IO priority in the bio for drivers that use
fops->submit_bio() to queue IO, like md/dm etc.
* tag 'block-6.8-2024-02-01' of git://git.kernel.dk/linux: (32 commits)
block: Fix where bio IO priority gets set
nvme: allow passthru cmd error logging
nvme-fc: show hostnqn when connecting to fc target
nvme-rdma: show hostnqn when connecting to rdma target
nvme-tcp: show hostnqn when connecting to tcp target
nvmet-fc: use RCU list iterator for assoc_list
nvmet-fc: take ref count on tgtport before delete assoc
nvmet-fc: avoid deadlock on delete association path
nvmet-fc: abort command when there is no binding
nvmet-fc: do not tack refs on tgtports from assoc
nvmet-fc: remove null hostport pointer check
nvmet-fc: hold reference on hostport match
nvmet-fc: free queue and assoc directly
nvmet-fc: defer cleanup using RCU properly
nvmet-fc: release reference on target port
nvmet-fcloop: swap the list_add_tail arguments
nvme-fc: do not wait in vain when unloading module
nvme-fc: log human-readable opcode on timeout
nvme: split out fabrics version of nvme_opcode_str()
nvme: take const cmd pointer in read-only helpers
...
