Stephen writes:
After merging the driver-core tree, today's linux-next build (x86_64
allmodconfig) produced this warning:
fs/orangefs/orangefs-debugfs.c: In function 'orangefs_debugfs_init':
fs/orangefs/orangefs-debugfs.c:193:1: warning: label 'out' defined but not used [-Wunused-label]
out:
^~~
fs/orangefs/orangefs-debugfs.c: In function 'orangefs_kernel_debug_init':
fs/orangefs/orangefs-debugfs.c:204:17: warning: unused variable 'ret' [-Wunused-variable]
struct dentry *ret;
^~~
Fix this up and change the return type of the function to void as it can
not fail, which cleans up some more code and variables as well.
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: devel@lists.orangefs.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f095adba36 ("orangefs: no need to check return value of debugfs_create functions")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen writes:
After merging the driver-core tree, today's linux-next build (arm
multi_v7_defconfig) produced this warning:
fs/ubifs/debug.c: In function 'dbg_debugfs_init_fs':
fs/ubifs/debug.c:2812:6: warning: unused variable 'err' [-Wunused-variable]
int err, n;
^~~
So fix this up properly.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some subsystems, such as pinctrl, allow continuing to defer probe
indefinitely. This is useful for devices that depend on resources
provided by devices that are only probed after the init stage.
One example of this can be seen on Tegra, where the DPAUX hardware
contains pinmuxing controls for pins that it shares with an I2C
controller. The I2C controller is typically used for communication
with a monitor over HDMI (DDC). However, other instances of the I2C
controller are used to access system critical components, such as a
PMIC. The I2C controller driver will therefore usually be a builtin
driver, whereas the DPAUX driver is part of the display driver that
is loaded from a module to avoid bloating the kernel image with all
of the DRM/KMS subsystem.
In this particular case the pins used by this I2C/DDC controller
become accessible very late in the boot process. However, since the
controller is only used in conjunction with display, that's not an
issue.
Unfortunately the driver core currently outputs a warning message
when a device fails to get the pinctrl before the end of the init
stage. That can be confusing for the user because it may sound like
an unwanted error occurred, whereas it's really an expected and
harmless situation.
In order to eliminate this warning, this patch allows callers of the
driver_deferred_probe_check_state() helper to specify that they want
to continue deferring probe, regardless of whether we're past the
init stage or not. All of the callers of that function are updated
for the new signature, but only the pinctrl subsystem passes a true
value in the new persist parameter if appropriate.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190621151725.20414-1-thierry.reding@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cacheinfo structures are alloced/freed by cpu online/offline
callbacks. Originally these were only used by sysfs to expose the
cache topology to user space. Without any in-kernel dependencies
CPUHP_AP_ONLINE_DYN was an appropriate choice.
resctrl has started using these structures to identify CPUs that
share a cache. It updates its 'domain' structures from cpu
online/offline callbacks. These depend on the cacheinfo structures
(resctrl_online_cpu()->domain_add_cpu()->get_cache_id()->
get_cpu_cacheinfo()).
These also run as CPUHP_AP_ONLINE_DYN.
Now that there is an in-kernel dependency, move the cacheinfo
work earlier so we know its done before resctrl's CPUHP_AP_ONLINE_DYN
work runs.
Fixes: 2264d9c74d ("x86/intel_rdt: Build structures for each resource based on cache topology")
Cc: <stable@vger.kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20190624173656.202407-1-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().
For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.
Cc: Corey Minyard <minyard@acm.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The prototype of bus_find_device() will be unified with that of
class_find_device() subsequently, but for this purpose the callback
functions passed to it need to take (const void *) as the second
argument. Consequently, they cannot modify the memory pointed to by
that argument which currently is not the case for acpi_dev_match_cb().
However, acpi_dev_match_cb() really need not modify the "match" object
passed to it, because acpi_dev_get_first_match_dev() which uses it via
bus_find_device() can easily convert the result of bus_find_device()
into the pointer to return.
For this reason, update acpi_dev_match_cb() to avoid the redundant
memory updates.
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable ret is being initialized with the value -EINVAL however
this value is never read and ret is being re-assigned later on. Hence
the initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The author of this file should be given an award for creativity:
the What: fields on this file technically fulfills the description
at README. Yet, the way it is, it can't be parsed on a script,
and if someone would try to do something like:
grep hwmon*/jtag_enable
It wouldn't find anything.
Fix the What fields in a way that it can be parseable by a
script and other search tools.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes, we just want the parser to retrieve all symbols from
ABI, in order to check for parsing errors. So, add a new
"validate" command.
While here, update the man/help pages.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ABI README file doesn't provide any meaning for a Where:
tag. Yet, a few ABI symbols use it. So, make the parser
handle it, emitting a warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file the Documentation/ABI/testing/sysfs-class-power has
voltage_min, voltage_max and voltage_now symbols duplicated.
They are defined first for "General Properties" and then for
"USB Properties".
This cause those warnings:
get_abi.pl rest --dir $srctree/Documentation/ABI/testing:26933: WARNING: Duplicate explicit target name: "abi_sys_class_power_supply_supply_name_voltage_max".
get_abi.pl rest --dir $srctree/Documentation/ABI/testing:26968: WARNING: Duplicate explicit target name: "abi_sys_class_power_supply_supply_name_voltage_min".
get_abi.pl rest --dir $srctree/Documentation/ABI/testing:27008: WARNING: Duplicate explicit target name: "abi_sys_class_power_supply_supply_name_voltage_now".
And, as the references are not valid, it will also generate
warnings about links to undefined references.
Fix it by storing labels into a hash table and, when a duplicated
one is found, appending random characters at the end.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few files are failing to parse:
Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
Documentation/ABI/testing/sysfs-class-pktcdvd
Documentation/ABI/testing/sysfs-bus-nfit
On all three files, the problem is that there is a ":" character
at the initial file description.
Improve the parse in order to handle those special cases.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several entries at the ABI have multiple What: with the same
description.
Instead of showing those symbols as sections, let's show them
as tables. That makes easier to read on the final output,
and avoid too much recursion at Sphinx parsing.
We need to put file references at the end, as we don't want
non-file tables to be mangled with other entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change its syntax to allow switching between ReST output mode
and a new search mode, with allows to seek for ABI symbols
using regex.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using a ReST compilant label while parsing,
move the label to ReST output. That makes the parsing logic
more generic, allowing it to provide other types of output.
As a side effect, now all files used to generate the output
will be output. We can later add command line arguments to
filter.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usage of literal blocks make the document very complex,
causing the browser to take a long time to load.
On most ABI descriptions, they're a plain text, and don't
require a literal block.
So, add a logic there with identifies when a literal block
is needed.
As, on literal blocks, we need to respect the original
document space, the most complex part of this patch is
to preserve the original spacing where needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It sounds usefult o parse files with has some text at the
beginning. Add support for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a script to parse the Documentation/ABI files and produce
an output with all entries inside an ABI (sub)directory.
Right now, it outputs its contents on ReST format. It shouldn't
be hard to make it produce other kind of outputs, since the ABI
file parser is implemented in separate than the output generator.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the various documents at the driver-model, preparing
them to be part of the driver-api book.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> # ice
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a typo at the name of the vars inside the kernel-doc
comment, causing those warnings:
./drivers/base/node.c:690: warning: Function parameter or member 'mem_nid' not described in 'register_memory_node_under_compute_node'
./drivers/base/node.c:690: warning: Function parameter or member 'cpu_nid' not described in 'register_memory_node_under_compute_node'
./drivers/base/node.c:690: warning: Excess function parameter 'mem_node' description in 'register_memory_node_under_compute_node'
./drivers/base/node.c:690: warning: Excess function parameter 'cpu_node' description in 'register_memory_node_under_compute_node'
There's also a description missing here:
./drivers/base/node.c:78: warning: Function parameter or member 'hmem_attrs' not described in 'node_access_nodes'
Copy an existing description from another function call.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
And even when not checking the return value, no need to cast away the
call to (void), as these functions were never a "must check" type of a
function, so remove that odd cast.
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs fields in
btrfs_raid_ktype and space_info_ktype with default_groups.
Change "raid_attributes" to "raid_attrs", and use the ATTRIBUTE_GROUPS
macro to create raid_groups and space_info_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for ARM SCMI
Message Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects the SPDX License Identifier style
in header file related to Firmware Drivers for Texas
Instruments SCI Protocol.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the kobj refcount increased by kobject_get should be released before
error return, otherwise lead to a memory leak.
Signed-off-by: Lin Yi <teroincn@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
