Merge updates related to runtime PM for 6.20-rc1/7.0-rc1:
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
* pm-runtime:
drm: Discard pm_runtime_put() return value
genirq/chip: Change irq_chip_pm_put() return type to void
scsi: ufs: core: Discard pm_runtime_put() return values
platform/chrome: cros_hps_i2c: Discard pm_runtime_put() return value
coresight: Discard pm_runtime_put() return values
hwspinlock: omap: Discard pm_runtime_put() return value
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
media: ccs: Discard pm_runtime_put() return value
drm/imagination: Discard pm_runtime_put() return value
USB: core: Discard pm_runtime_put() return value
Merge updates related to system suspend and hibernation for
6.20-rc1/7.0-rc1:
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
* pm-sleep:
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
PM: sleep: Do not flag runtime PM workqueue as freezable
Merge cpuidle updates for 6.20-rc1/7.0-rc1:
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the closest
timer event when the scheduler tick has been stopped to prevent it
from mistakenly selecting the deepest available idle state (Rafael
Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal decisions
in certain corner cases and generally improve idle state selection
accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers (Breno
Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer (Christian
Loehle)
* pm-cpuidle:
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpuidle: governors: teo: Refine tick_intercepts vs total events check
cpuidle: governors: teo: Avoid fake intercepts produced by tick
cpuidle: governors: teo: Avoid selecting states with zero-size bins
cpuidle: governors: menu: Always check timers with tick stopped
MAINTAINERS: Add myself as cpuidle reviewer
cpuidle: menu: Remove incorrect unlikely() annotation
intel_idle: Add C-states validation
intel_idle: Add cmdline option to adjust C-states table
intel_idle: Initialize sysfs after cpuidle driver initialization
intel_idle: Remove the 'preferred_cstates' parameter
intel_idle: Remove unused driver version constant
dev_pm_clear_wake_irq() currently uses a dangerous pattern where
dev->power.wakeirq is read and checked for NULL outside the lock.
If two callers invoke this function concurrently, both might see
a valid pointer and proceed. This could result in a double-free
when the second caller acquires the lock and tries to release the
same object.
Address this by removing the lockless check of dev->power.wakeirq.
Instead, acquire dev->power.lock immediately to ensure the check and
the subsequent operations are atomic. If dev->power.wakeirq is NULL
under the lock, simply unlock and return. This guarantees that
concurrent calls cannot race to free the same object.
Based on a quick scan of current users, I did not find an actual bug as
drivers seem to rely on their own synchronization. However, since
asynchronous usage patterns exist (e.g., in
drivers/net/wireless/ti/wlcore), I believe a race is theoretically
possible if the API is used less carefully in the future. This change
hardens the API to be robust against such cases.
Fixes: 4990d4fe32 ("PM / Wakeirq: Add automated device wake IRQ handling")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260203031943.1924-1-hanguidong02@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the description in the intel_pstate.rst documentation,
Capacity-Aware Scheduling and Energy-Aware Scheduling are only
supported on a hybrid processor without SMT. Previously, the system
used sched_smt_active() for judgment, which is not a strict condition
because users can switch it on or off via /sys at any time.
This could lead to incorrect driver settings in certain scenarios.
For example, on a CPU that supports SMT, a user can disable SMT
via the nosmt parameter to enable asym capacity, and then re-enable
SMT via /sys. In such cases, some settings in the driver would no
longer be correct.
To address this issue, replace sched_smt_active() with cpu_smt_possible(),
and only enable asym capacity when CPU SMT is not possible.
Fixes: 929ebc93cc ("cpufreq: intel_pstate: Set asymmetric CPU capacity on hybrid systems")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260203024852.301066-1-tianyaxiong@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the case of an empty wakeup_sources list, wakeup_sources_walk_start()
will return an invalid but non-NULL address. This also affects wrappers
of the aforementioned function, like for_each_wakeup_source().
Update wakeup_sources_walk_start() to return NULL in case of an empty
list.
Fixes: b4941adb24 ("PM: wakeup: Add routine to help fetch wakeup source object.")
Signed-off-by: Samuel Wu <wusamuel@google.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260124012133.2451708-2-wusamuel@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are cases in which decisions made by the teo governor are
arguably overly conservative.
For instance, suppose that there are 4 idle states and the values of
the intercepts metric for the first 3 of them are 400, 250, and 251,
respectively. If the total sum computed in teo_update() is 1000, the
governor will select idle state 1 (provided that all idle states are
enabled and the scheduler tick has not been stopped) although arguably
idle state 0 would be a better choice because the likelihood of getting
an idle duration below the target residency of idle state 1 is greater
than the likelihood of getting an idle duration between the target
residency of idle state 1 and the target residency of idle state 2.
To address this, refine the candidate idle state lookup based on
intercepts to start at the state with the maximum intercepts metric,
below the deepest enabled one, to avoid the cases in which the search
may stop before reaching that state.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Fixed typo "intercetps" in new comments (3 places) ]
Link: https://patch.msgid.link/2417298.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If differences between target residency values of adjacent idle states
of a given CPU are relatively large, the corresponding idle state bins
used by the teo governors are large either and the rule by which hits
are distinguished from intercepts is inaccurate.
Namely, by that rule, a wakeup event is classified as a hit if the
sleep length (the time till the closest timer other than the tick)
and the measured idle duration, adjusted for the entered idle state
exit latency, fall into the same idle state bin. However, if that bin
is large enough, the actual difference between the sleep length and
the measured idle duration may be significant. It may in fact be
significantly greater than the analogous difference for an event where
the sleep length and the measured idle duration fall into different
bins.
For this reason, amend the rule in question with a check that will only
allow a wakeup event to be counted as a hit if the sleep length is less
than the "raw" measured idle duration (which means that the wakeup
appears to have occurred after the anticipated timer event). Otherwise,
the event will be counted as an intercept.
Also update the documentation part explaining the difference between
"hits" and "intercepts" to take the above change into account.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5093379.31r3eYUQgx@rafael.j.wysocki
According to the Linux kernel ABI documentation for 'scaling_setspeed':
"It returns the last frequency requested by the governor (in kHz) or
can be written to in order to set a new frequency for the policy."
However, the current implementation of show_speed() returns 'policy->cur'.
'policy->cur' represents the frequency after the driver has
resolved the request against the hardware frequency table and applied
policy limits (min/max).
This creates a discrepancy between the documentation/user expectation
and the actual code behavior. For instance:
1. User writes a value to 'scaling_setspeed' that is not in the OPP
table (e.g., user asks for A, driver rounds it to B).
2. User reads 'scaling_setspeed'.
3. Code returns B ('policy->cur').
4. User expects A (the "frequency requested"), but gets B.
This patch changes show_speed() to return 'userspace->setspeed', which
stores the actual value last requested by the user. This restores the
read/write symmetry of the attribute and aligns the code with the ABI
description.
The effective frequency can still be observed via 'scaling_cur_freq' or
'cpuinfo_cur_freq', preserving the distinction between "what was
requested" (setspeed) and "what is effective" (cur_freq).
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: lihuisong@huawei.com
Link: https://patch.msgid.link/20260116094623.2980031-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since acomp_request_free() checks its argument against NULL, the NULL
pointer checks before calling it added by commit ("7966cf0ebe32 PM:
hibernate: Fix crash when freeing invalid crypto compressor") are
redundant, so drop them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6233709.lOV4Wx5bFT@rafael.j.wysocki
Add generic helper functions for u64 sysfs attributes that follow the
common pattern of calling CPPC get/set APIs:
- cppc_cpufreq_sysfs_show_u64(): reads value and handles -EOPNOTSUPP
- cppc_cpufreq_sysfs_store_u64(): parses input and calls set function
Add CPPC_CPUFREQ_ATTR_RW_U64() macro to generate show/store functions
using these helpers, reducing boilerplate for simple attributes.
Convert auto_act_window and energy_performance_preference_val to use
the new macro.
No functional changes.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
[ rjw: Retained empty code line after a conditional ]
Link: https://patch.msgid.link/20260120145623.2959636-2-sumitg@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull CPUFreq Arm updates for 7.0 from Viresh Kumar:
"- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio).
- Minor improvements to the cpufreq / cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen).
- Add support for AM62L3 SoC to ti-cpufreq driver (Dhruva Gole).
- Update FIE arch_freq_scale in ticks for non-PCC regs (Jie Zhan).
- Other minor cleanups / improvements (Felix Gu, Juan Martinez, Luca
Weiss, and Sergey Shtylyov)."
* tag 'cpufreq-arm-updates-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
cpufreq: CPPC: Update FIE arch_freq_scale in ticks for non-PCC regs
cpufreq: CPPC: Factor out cppc_fie_kworker_init()
ACPI: CPPC: Factor out and export per-cpu cppc_perf_ctrs_in_pcc_cpu()
rust: cpufreq: replace `kernel::c_str!` with C-Strings
cpufreq: Add Tegra186 and Tegra194 to cpufreq-dt-platdev blocklist
dt-bindings: cpufreq: qcom-hw: document Milos CPUFREQ Hardware
rust: cpufreq: add __rust_helper to helpers
rust: cpufreq: always inline functions using build_assert with arguments
Pull a CPUFreq driver fix for 6.19 from Viresh Kumar:
- Add sentinel to qcom_cpufreq_ipq806x_match_list (Pei Xiao).
* tag 'cpufreq-arm-fixes-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-nvmem: add sentinel to qcom_cpufreq_ipq806x_match_list
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In scmi_cpu_domain_id(), it does not release the reference.
Fixes: e336baa419 ("cpufreq: scmi: Prepare to move OF parsing of domain-id to cpufreq")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add CPUFreq support for the AM62L3 SoC with the appropriate
AM62L3 speed grade constants according to the datasheet [1].
This follows the same architecture-specific implementation pattern
as other TI SoCs in the AM6x family.
While at it, also sort instances where the SOC family names
were not sorted alphabetically.
[1] https://www.ti.com/lit/pdf/SPRSPA1
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add AM62L3 SoC to the dt-platdev blocklist to ensure proper handling
of CPUFreq functionality. The AM62L3 will use its native TI CPUFreq
driver implementation instead of the generic dt-platdev driver.
This follows the same pattern as other TI SoCs like AM62A7, AM62D2,
and AM62P5 which have been previously added to this blocklist.
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add comment explaining why nominal_perf is used for MinPerf when the
CPU frequency policy is set to CPUFREQ_POLICY_PERFORMANCE, rather than
using highest_perf or lowest_nonlinear_perf.
Signed-off-by: Juan Martinez <juan.martinez@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
SCMI stands for System Control and Management Interface, not System Control
and Power Interface -- apparently, Sudeep Holla copied this line from his
SCPI driver and then just forgot to update the acronym explanation... :-)
Fixes: 99d6bdf338 ("cpufreq: add support for CPU DVFS based on SCMI message protocol")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Rename `as_ref` and `as_mut_ref` to `from_raw` and `from_raw_mut` to
align with the established naming convention for constructing types
from raw pointers in the kernel's Rust codebase.
Signed-off-by: Yilin Chen <1479826151@qq.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently, the CPPC Frequency Invariance Engine (FIE) is invoked from the
scheduler tick but defers the update of arch_freq_scale to a separate
thread because cppc_get_perf_ctrs() would sleep if the CPC regs are in PCC.
However, this deferred update mechanism is unnecessary and introduces extra
overhead for non-PCC register spaces (e.g. System Memory or FFH), where
accessing the regs won't sleep and can be safely performed from the tick
context.
Furthermore, with the CPPC FIE registered, it throws repeated warnings of
"cppc_scale_freq_workfn: failed to read perf counters" on our platform with
the CPC regs in System Memory and a power-down idle state enabled. That's
because the remote CPU can be in a power-down idle state, and reading its
perf counters returns 0. Moving the FIE handling back to the scheduler
tick process makes the CPU handle its own perf counters, so it won't be
idle and the issue would be inherently solved.
To address the above issues, update arch_freq_scale directly in ticks for
non-PCC regs and keep the deferred update mechanism for PCC regs.
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The of_device_id table is expected to be NULL-terminated. Without the
sentinel, the traversal of the array can lead to out-of-bound access,
causing undefined behavior.
This adds the missing sentinel to the qcom_cpufreq_ipq806x_match_list
array.
Fixes: 58f5d39d5e ("cpufreq: qcom-nvmem: add compatible fallback for ipq806x for no SMEM")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull SCSI fixes from James Bottomley:
"Only one core change, the rest are drivers.
The core change reorders some state operations in the error handler to
try to prevent missed wake ups of the error handler (which can halt
error processing and effectively freeze the entire system)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
scsi: core: Wake up the error handler when final completions race against each other
scsi: storvsc: Process unsupported MODE_SENSE_10
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
Pull keys fix from Jarkko Sakkinen.
* tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes for 6.19-rc7 that resolve
some reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues"
* tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Fix not set tty->port race condition
serial: 8250_pci: Fix broken RS485 for F81504/508/512
serial: qcom_geni: Fix BT failure regression on RB2 platform
Pull i2c fix from Wolfram Sang:
- k1: drop wrong IRQF_ONESHOT from IRQ request to fix genirq warning
* tag 'i2c-for-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: spacemit: drop IRQF_ONESHOT flag from IRQ request
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
References:
[1] trustedcomputinggroup.org/wp-content/uploads/
Trusted-Platform-Module-2.0-Library-Part-3-Version-184_pub.pdf
Fixes: 6e9722e9a7 ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
Pull NTB fix from Jon Mason:
"Bug fix for uninitialized mutex in ntb transport"
* tag 'ntb-6.19-bugfixes' of https://github.com/jonmason/ntb:
ntb: transport: Fix uninitialized mutex
Pull tracing fixes from Steven Rostedt:
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single
event that can display fields from both events as well as the time
delta that took place between the events. It can also pass a
stacktrace from the first event so that it can be displayed by the
synthetic event (this is useful to get a stacktrace of a task
scheduling out when blocked and recording the time it was blocked
for).
A synthetic event can also connect an existing synthetic event to
another event. An issue was found that if the first synthetic event
had a stacktrace as one of its fields, and that stacktrace field was
passed to the new synthetic event to be displayed, it would crash the
kernel. This was due to the stacktrace not being saved as a
stacktrace but was still marked as one. When the stacktrace was read,
it would try to read an array but instead read the integer metadata
of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stacktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses
are greater than 2GB apart it could lead to truncation and cause a
bad search result. Use normal compares instead of a subtraction
between addresses to calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two
different types that hold the argument array. The macro
FGRAPH_ENTRY_ARGS() is used to find the correct arguments from the
given type. One location was missed and still referenced the
arguments directly via entry->args and could produce the wrong value
depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
* tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/tracepoint-update: Fix memory leak in add_string() on failure
function_graph: Fix args pointer mismatch in print_graph_retval()
tracing: Avoid possible signed 64-bit truncation
tracing: Fix crash on synthetic stacktrace field usage
Pull driver core fixes from Danilo Krummrich:
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks
* tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: driver: drop device private data post unbind
rust: driver: add DriverData type to the DriverLayout trait
rust: driver: add DEVICE_DRIVER_OFFSET to the DriverLayout trait
rust: driver: introduce a DriverLayout trait
rust: auxiliary: add Driver::unbind() callback
rust: i2c: do not drop device private data on shutdown()
rust: irq: always inline functions using build_assert with arguments
rust: io: always inline functions using build_assert with arguments
Pull timer fixes from Ingo Molnar:
- Fix auxiliary timekeeper update & locking bug
- Reduce the sensitivity of the clocksource watchdog,
to fix false positive measurements that marked the
TSC clocksource unstable
* tag 'timers-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Reduce watchdog readout delay limit to prevent false positives
timekeeping: Adjust the leap state for the correct auxiliary timekeeper
Pull scheduler fixes from Ingo Molnar:
- Fix PELT clock synchronization bug when entering idle
- Disable the NEXT_BUDDY feature, as during extensive testing
Mel found that the negatives outweigh the positives
- Make wakeup preemption less aggressive, which resulted in
an unreasonable increase in preemption frequency
* tag 'sched-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Revert force wakeup preemption
sched/fair: Disable scheduler feature NEXT_BUDDY
sched/fair: Fix pelt clock sync when entering idle
