Add description for 'struct regmap *cci' member of struct imx335.
This will fix the following compile-time warning:
warning: Function parameter or struct member 'cci' not described in 'imx335'
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various HP models with IPU6 +
hi556 sensor, the sensor driver must control the avdd regulator itself.
Add support for having the driver control the sensor's avdd regulator.
Note this relies on the regulator-core providing a dummy regulator
(which it does by default) on platforms where Linux is not aware of
the avdd regulator.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various HP models with IPU6 +
hi556 sensor, the sensor driver must control the sensor's clock itself.
Add support for having the driver control an optional clock.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various HP models with IPU6 +
hi556 sensor, the sensor driver must control the reset GPIO itself.
Add support for having the driver control an optional reset GPIO.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ipu bridge, endpoints may only be created when ipu bridge has
initialised. This may happen after the sensor driver has first probed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is no reason to send OV2680_END_MARGIN extra columns on top of
the mode width and the same for sending extra lines over the mode height.
This sending of extra lines/columns was inherited from the atomisp
ov2680 driver, it is unclear why this was done and this complicates
adding V4L2_CID_VBLANK support, so remove it.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Since commit 63b0cd30b7 ("media: ov2680: Add bus-cfg / endpoint
property verification") the ov2680 driver no longer probes when the
'data-lanes' property is absent.
The OV2680 sensor has only one data lane, so there is no need for
describing it the devicetree.
Remove the unnecessary data-lanes property check.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 63b0cd30b7 ("media: ov2680: Add bus-cfg / endpoint property verification")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The sensor gain (both analog and digital) are controlled by a
single gain value where:
- 0dB to 30dB correspond to analog gain
- 30.3dB to 72dB correspond to digital gain
(with 0.3dB step)
Hence, limit the analogue gain value to 100.
For digital gain, support can be added later if needed.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The imx335 reports a recommended pixel area of - 2592x1944.
The driver supported mode however limits it to height=1940.
Fix the height discrepency by correctly the value of height
(with updates to vblank and mode registers).
The IMX335_REG_HTRIMMING should also be corrected to the start
offset(i.e. 48) instead of chosing a abritrary crop start of 384.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the control handler is in an error state, return that error immediately
in v4l2_ctrl_new_fwnode_properties(). Effectively the change here is that
the same error code (handler's error) is returned in all cases instead of
possibly returning -EINVAL.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the current firmware path in linux-firmware repository. Check the
older paths still in order to avoid causing issues to the users.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
After the frame is submitted to DMA, it may happen that the submitted
list is not updated soon enough, and the DMA callback is triggered
before that.
This can lead to kernel crashes, so move everything in a single
lock/unlock section to prevent such races.
Fixes: b4a3d877dc ("media: ti: Add CSI2RX support for J721E")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When the source device is operating above 1.5 Gbps per lane, it needs to
send the Skew Calibration Sequence before sending any HS data. If the
DPHY is initialized after the source stream is started, then it might
miss the sequence and not be able to receive data properly. Move the
start of source subdev to the end of the sequence to make sure
everything is ready to receive data before the source starts streaming.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Fixes: 3295cf1241 ("media: cadence: Add support for external dphy")
Tested-by: Julien Massot <julien.massot@collabora.com>
Tested-by: Changhuang Liang <Changhuang.liang@starfivetech.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Changhuang Liang <Changhuang.liang@starfivetech.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
First the media device node was created, and if successful it was
marked as 'registered'. This leaves a small race condition where
an application can open the device node and get an error back
because the 'registered' flag was not yet set.
Change the order: first set the 'registered' flag, then actually
register the media device node. If that fails, then clear the flag.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: cf4b9211b5 ("[media] media: Media device node support")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
USB urbs must be allocated with usb_alloc_urb. Quoting the manual
Only use this function (usb_init_urb) if you _really_ understand what you
are doing.
Fix the following smatch error:
drivers/media/usb/siano/smsusb.c:53:38: warning: array of flexible structures
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch warnings:
WARNING:PRINTK_WITHOUT_KERN_LEVEL: printk() should include KERN_<LEVEL> facility level
WARNING:PREFER_PR_LEVEL: Prefer [subsystem eg: netdev]_dbg([subsystem]dev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ...
WARNING:EMBEDDED_FUNCTION_NAME: Prefer using '"%s...", __func__' to using 'ciintf_slot_ts_enable', this function's name, in a string
CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'level' may be better as '(level)' to avoid precedence issues
There was no consistent style of logging functions used so far.
Convert all logging to the appropriate pr_* macros.
Add a global pr_fmt macro for the whole driver.
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch warnings:
WARNING:RETURN_VOID: void function return statements are not generally useful
WARNING:TRAILING_SEMICOLON: macros should not use a trailing semicolon
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch warnings:
WARNING:CONSTANT_COMPARISON: Comparisons should place the constant on the right side of the test
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch errors:
ERROR:TRAILING_STATEMENTS: trailing statements should be on next line
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch errors:
ERROR:ASSIGN_IN_IF: do not use assignment in if condition
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch warnings:
WARNING:EXPORT_SYMBOL: EXPORT_SYMBOL(foo); should immediately follow its function/variable
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch warnings and errors:
WARNING:BRACES: braces {} are not necessary for any arm of this statement
WARNING:BRACES: braces {} are not necessary for single statement blocks
ERROR:OPEN_BRACE: that open brace { should be on the previous line
CHECK:BRACES: braces {} should be used on all arms of this statement
CHECK:BRACES: Unbalanced braces around else statement
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch warnings:
WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
WARNING: It's generally not useful to have the filename in the file
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It fixes the following checkpatch errors:
ERROR:SPACING: space prohibited before that ',' (ctx:WxW)
ERROR:SPACING: space required after that ',' (ctx:VxV)
ERROR:SWITCH_CASE_INDENT_LEVEL: switch and case should be at the same indent
This patch contains the large multi line blocks.
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch fixes the following checkpatch warnings and errors:
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
ERROR:SPACING: space prohibited after that open parenthesis '('
ERROR:SPACING: space prohibited before that close parenthesis ')'
ERROR:SPACING: space prohibited before that ',' (ctx:WxW)
ERROR:SPACING: space required after that ',' (ctx:VxV)
ERROR:SPACING: space required before that '-' (ctx:OxV)
ERROR:SPACING: space required before the open parenthesis '('
ERROR:SPACING: spaces required around that '!=' (ctx:VxO)
ERROR:SPACING: spaces required around that '<' (ctx:VxV)
ERROR:SPACING: spaces required around that '=' (ctx:VxV)
ERROR:SPACING: spaces required around that '>=' (ctx:VxV)
WARNING:SPACING: space prohibited between function name and open parenthesis '('
WARNING:TABSTOP: Statements should start on a tabstop
WARNING:LEADING_SPACE: please, no spaces at the start of a line
WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements
WARNING:LINE_SPACING: Missing a blank line after declarations
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
i2c_device_probe(), seems to assume that irq = 0 means that there is no
irq to request.
The driver also believes that on the clean path. So lets be consistent
here.
Also make smatch happy.
Fix:
drivers/media/i2c/adv7180.c:1526 adv7180_probe() warn: 'client->irq' from request_threaded_irq() not released on lines: 1526
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Simplify a bit the code introducing a new variable for iterating through
the control list.
It also makes smatch happy:
drivers/media/v4l2-core/v4l2-ctrls-api.c:1091 v4l2_query_ext_ctrl() warn: iterator used outside loop: 'ref'
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix tiny whitespace issue in 'pos = ref': use just one space]
hva->clk cannot be NULL at this point. Simplify the code and make smatch
happy:
drivers/media/platform/st/sti/hva/hva-hw.c:412 hva_hw_probe() warn: 'hva->clk' from clk_prepare() not released on lines: 412
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add missing release_firmware on the error paths.
drivers/media/usb/dvb-usb/dib0700_devices.c:2415 stk9090m_frontend_attach() warn: 'state->frontend_firmware' from request_firmware() not released on lines: 2415.
drivers/media/usb/dvb-usb/dib0700_devices.c:2497 nim9090md_frontend_attach() warn: 'state->frontend_firmware' from request_firmware() not released on lines: 2489,2497.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Do not cache the file, instead load it on demand.
This makes smatch a happy parser:
drivers/media/dvb-frontends/drx39xyj/drxj.c:11908 drx_ctrl_u_code() warn: 'fw' from request_firmware() not released on lines: 11877,11886,11896.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Make sure the firmware is released when we leave
xc_load_fw_and_init_tuner()
This change makes smatch happy:
drivers/media/tuners/xc5000.c:1213 xc_load_fw_and_init_tuner() warn: 'fw' from request_firmware() not released on lines: 1213.
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
release_firmware() in the same function that it was requested. It is
more clear and makes smatch happy.
drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c:1146 load_c8sectpfe_fw() warn: 'fw' from request_firmware() not released on lines: 1125,1132.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The handled version of request_irq let us remove the free_irq and makes
smatch happier:
drivers/media/pci/saa7134/saa7134-alsa.c:1186 alsa_card_saa7134_create() warn: 'dev->pci->irq' from request_irq() not released on lines: 1186
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Let devm handle the life cycle of the irq request.
Makes smatch happier:
drivers/media/pci/solo6x10/solo6x10-core.c:631 solo_pci_probe() warn: 'pdev' from pci_request_regions() not released on lines: 631.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of handling manually the release of the memory regions let devm
do that for us.
Makes smatch happy:
drivers/media/pci/solo6x10/solo6x10-core.c:631 solo_pci_probe() warn: 'pdev' from pci_request_regions() not released on lines: 631.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
