Add static inline dst_dev_overhead() function to include/net/dst.h. This
helper function is used by ioam6_iptunnel, rpl_iptunnel and
seg6_iptunnel to get the dev's overhead based on a cache entry
(dst_entry). If the cache is empty, the default and generic value
skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev
is returned.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: add negotiation of in-band capabilities
This is a repost without RFC for this series, shrunk down to 13 patches
by removing the non-Marvell PCS.
Phylink's handling of in-band has been deficient for a long time, and
people keep hitting problems with it. Notably, situations with the way-
to-late standardized 2500Base-X and whether that should or should not
have in-band enabled. We have also been carrying a hack in the form of
phylink_phy_no_inband() for a PHY that has been used on a SFP module,
but has no in-band capabilities, not even for SGMII.
When phylink is trying to operate in in-band mode, this series will look
at the capabilities of the MAC-side PCS and PHY, and work out whether
in-band can or should be used, programming the PHY as appropriate. This
includes in-band bypass mode at the PHY.
We don't... yet... support bypass on the MAC side PCS, because that
requires yet more complexity.
Patch 1 passes struct phylink and struct phylink_pcs into
phylink_pcs_neg_mode() so we can look at more state in this function in
a future patch.
Patch 2 splits "cur_link_an_mode" (the MLO_AN_* mode) into two separate
purposes - a requested and an active mode. The active mode is the one
we will be using for the MAC, which becomes dependent on the result of
in-band negotiation.
Patch 3 adds debug to phylink_major_config() so we can see what is going
on with the requested and active AN modes.
Patch 4 adds to phylib a method to get the in-band capabilities of the
PHY from phylib. Patches 5 and 6 add implementations for BCM84881 and
some Marvell PHYs found on SFPs.
Patch 7 adds to phylib a method to configure the PHY in-band signalling,
and patch 8 implements it for those Marvell PHYs that support the method
in patch 4.
Patch 9 does the same as patch 4 but for the MAC-side PCS, with patches
10 and 11 adding support to Marvell NETA and PP2.
Patch 12 adds the code to phylink_pcs_neg_mode() which looks at the
capabilities, and works out whether to use in-band or out-band mode for
driving the link between the MAC PCS and PHY.
Patch 13 removes the phylink_phy_no_inband() hack now that we are
publishing the in-band capabilities from the BCM84881 PHY driver.
Three more PCS, omitted from this series due to the limit of 15 patches,
will be sent once this has been merged.
====================
Link: https://patch.msgid.link/Z08kCwxdkU4n2V6x@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support for in-band signalling with Serdes links is uncertain. Some
PHYs do not support in-band for e.g. SGMII. Some PCS do not support
in-band for 2500Base-X. Some PCS require in-band for Base-X protocols.
Simply using what is in DT is insufficient when we have hot-pluggable
PHYs e.g. in the form of SFP modules, which may not provide the
in-band signalling.
In order to address this, we have introduced phy_inband_caps() and
pcs_inband_caps() functions to allow phylink to retrieve the
capabilities from each end of the PCS/PHY link. This commit adds code
to resolve whether in-band will be used in the various scenarios that
we have: In-band not being used, PHY present using SGMII or Base-X,
PHY not present. We also deal with no capabilties provided.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUsJ-006IUn-H3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a pcs_inband_caps() method to query the PCS for its inband link
capabilities, and use this to determine whether link modes used with
optical SFPs can be supported.
When a PCS does not provide a method, we allow inband negotiation to
be either on or off, making this a no-op until the pcs_inband_caps()
method is implemented by a PCS driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUs4-006IUU-7K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a method to query the PHY's in-band capabilities for a PHY
interface mode.
Where the interface mode does not have in-band capability, or the PHY
driver has not been updated to return this information, then
phy_inband_caps() should return zero. Otherwise, PHY drivers will
return a value consisting of the following flags:
LINK_INBAND_DISABLE indicates that the hardware does not support
in-band signalling, or can have in-band signalling configured via
software to be disabled.
LINK_INBAND_ENABLE indicates that the hardware will use in-band
signalling, or can have in-band signalling configured via software
to be enabled.
LINK_INBAND_BYPASS indicates that the hardware has the ability to
bypass in-band signalling when enabled after a timeout if the link
partner does not respond to its in-band signalling.
This reports the PHY capabilities for the particular interface mode,
not the current configuration.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUre-006ITz-KF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is an interdependence between the current link_an_mode and
pcs_neg_mode that some drivers rely upon to know whether inband or PHY
mode will be used.
In order to support detection of PCS and PHY inband capabilities
resulting in automatic selection of inband or PHY mode, we need to
cater for this, and support changing the MAC link_an_mode. However, we
end up with an inter-dependency between the current link_an_mode and
pcs_neg_mode.
To solve this, split the current link_an_mode into the requested
link_an_mode and active link_an_mode. The requested link_an_mode will
always be passed to phylink_pcs_neg_mode(), and the active link_an_mode
will be used for everything else, and only updated during
phylink_major_config(). This will ensure that phylink_pcs_neg_mode()'s
link_an_mode will not depend on the active link_an_mode that will,
in a future patch, depend on pcs_neg_mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrU-006ITn-Ai@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the call to phylink_pcs_neg_mode() in phylink_major_config() after
we have selected the appropriate PCS to allow the PCS to be passed in.
Add struct phylink and struct phylink_pcs pointers to
phylink_pcs_neg_mode() and pass in the appropriate structures. Set
pl->pcs_neg_mode before returning, and remove the return value.
This will allow the capabilities of the PCS and any PHY to be used when
deciding which pcs_neg_mode should be used.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tIUrP-006ITh-6u@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maksym Kutsevol says:
====================
netcons: Add udp send fail statistics to netconsole
Enhance observability of netconsole. Packet sends can fail.
Start tracking at least two failure possibilities: ENOMEM and
NET_XMIT_DROP for every target. Stats are exposed via an additional
attribute in CONFIGFS.
The exposed statistics allows easier debugging of cases when netconsole
messages were not seen by receivers, eliminating the guesswork if the
sender thinks that messages in question were sent out.
Stats are not reset on enable/disable/change remote ip/etc, they
belong to the netcons target itself.
====================
Link: https://patch.msgid.link/20241202-netcons-add-udp-send-fail-statistics-to-netconsole-v5-0-70e82239f922@kutsevol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/ptp to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these drivers, make the alignment of the touched
initializers consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Current release - regressions:
- rtnetlink: fix rtnl_dump_ifinfo() error path
- bluetooth: remove the redundant sco_conn_put
Previous releases - regressions:
- netlink: fix false positive warning in extack during dumps
- sched: sch_fq: don't follow the fast path if Tx is behind now
- ipv6: delete temporary address if mngtmpaddr is removed or
unmanaged
- tcp: fix use-after-free of nreq in reqsk_timer_handler().
- bluetooth: fix slab-use-after-free Read in set_powered_sync
- l2tp: fix warning in l2tp_exit_net found
- eth:
- bnxt_en: fix receive ring space parameters when XDP is active
- lan78xx: fix double free issue with interrupt buffer allocation
- tg3: set coherent DMA mask bits to 31 for BCM57766 chipsets
Previous releases - always broken:
- ipmr: fix tables suspicious RCU usage
- iucv: MSG_PEEK causes memory leak in iucv_sock_destruct()
- eth:
- octeontx2-af: fix low network performance
- stmmac: dwmac-socfpga: set RX watchdog interrupt as broken
- rtase: correct the speed for RTL907XD-V1
Misc:
- some documentation fixup"
* tag 'net-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ipmr: fix build with clang and DEBUG_NET disabled.
Documentation: tls_offload: fix typos and grammar
Fix spelling mistake
ipmr: fix tables suspicious RCU usage
ip6mr: fix tables suspicious RCU usage
ipmr: add debug check for mr table cleanup
selftests: rds: move test.py to TEST_FILES
net_sched: sch_fq: don't follow the fast path if Tx is behind now
tcp: Fix use-after-free of nreq in reqsk_timer_handler().
net: phy: fix phy_ethtool_set_eee() incorrectly enabling LPI
net: Comment copy_from_sockptr() explaining its behaviour
rxrpc: Improve setsockopt() handling of malformed user input
llc: Improve setsockopt() handling of malformed user input
Bluetooth: SCO: remove the redundant sco_conn_put
Bluetooth: MGMT: Fix possible deadlocks
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
bnxt_en: Unregister PTP during PCI shutdown and suspend
bnxt_en: Refactor bnxt_ptp_init()
bnxt_en: Fix receive ring space parameters when XDP is active
bnxt_en: Fix queue start to update vnic RSS table
...
Pull spi fixes from Mark Brown:
"A few fairly minor driver specific fixes, plus one core fix for the
handling of deferred probe on ACPI systems - ignoring probe deferral
and incorrectly treating it like a fatal error while parsing the
generic ACPI bindings for SPI devices"
* tag 'spi-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix acpi deferred irq probe
spi: atmel-quadspi: Fix register name in verbose logging function
spi-imx: prevent overflow when estimating transfer time
spi: rockchip-sfc: Embedded DMA only support 4B aligned address
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, plus
documetation of a new device ID for the Qualcomm LABIBB driver.
There's a core fix for the rarely used current constraints and a fix
for the Qualcomm RPMH driver which had described only one of the two
voltage ranges that the hardware could control, creating a potential
incompatibility with the configuration left by firmware"
* tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Ignore unset max_uA constraints in current limit check
dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator
regulator: qcom-rpmh: Update ranges for FTSMPS525
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
Pull ntfs3 updates from Konstantin Komarov:
- additional checks to address issues identified by syzbot
- continuation of the transition from 'page' to 'folio'
* tag 'ntfs3_for_6.13' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: Accumulated refactoring changes
fs/ntfs3: Switch to folio to release resources
fs/ntfs3: Add check in ntfs_extend_initialized_size
fs/ntfs3: Add more checks in mi_enum_attr (part 2)
fs/ntfs3: Equivalent transition from page to folio
fs/ntfs3: Fix case when unmarked clusters intersect with zone
fs/ntfs3: Fix warning in ni_fiemap
Pull exfat updates from Namjae Jeon:
- If the start cluster of stream entry is invalid, treat it as the
empty directory
- Valid size of steam entry cannot be greater than data size. If
valid_size is invalid, use data_size
- Move Direct-IO alignment check to before extending the valid size
- Fix uninit-value issue reported by syzbot
- Optimize finding directory entry-set in write_inode, rename, unlink
* tag 'exfat-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: reduce FAT chain traversal
exfat: code cleanup for exfat_readdir()
exfat: remove argument 'p_dir' from exfat_add_entry()
exfat: move exfat_chain_set() out of __exfat_resolve_path()
exfat: add exfat_get_dentry_set_by_ei() helper
exfat: rename argument name for exfat_move_file and exfat_rename_file
exfat: remove unnecessary read entry in __exfat_rename()
exfat: fix file being changed by unaligned direct write
exfat: fix uninit-value in __exfat_get_dentry_set
exfat: fix out-of-bounds access of directory entries
Paolo Abeni says:
====================
net: fix mcast RCU splats
This series addresses the RCU splat triggered by the forwarding
mroute tests.
The first patch does not address any specific issue, but makes the
following ones more clear. Patch 2 and 3 address the issue for ipv6 and
ipv4 respectively.
====================
Link: https://patch.msgid.link/cover.1732289799.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to the previous patch, plumb the RCU lock inside
the ipmr_get_table(), provided a lockless variant and apply
the latter in the few spots were the lock is already held.
Fixes: 709b46e8d9 ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT")
Fixes: f0ad0860d0 ("ipv4: ipmr: support multiple tables")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Several places call ip6mr_get_table() with no RCU nor RTNL lock.
Add RCU protection inside such helper and provide a lockless variant
for the few callers that already acquired the relevant lock.
Note that some users additionally reference the table outside the RCU
lock. That is actually safe as the table deletion can happen only
after all table accesses are completed.
Fixes: e2d57766e6 ("net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.")
Fixes: d7c31cbde4 ("net: ip6mr: add RTM_GETROUTE netlink op")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The multicast route tables lifecycle, for both ipv4 and ipv6, is
protected by RCU using the RTNL lock for write access. In many
places a table pointer escapes the RCU (or RTNL) protected critical
section, but such scenarios are actually safe because tables are
deleted only at namespace cleanup time or just after allocation, in
case of default rule creation failure.
Tables freed at namespace cleanup time are assured to be alive for the
whole netns lifetime; tables freed just after creation time are never
exposed to other possible users.
Ensure that the free conditions are respected in ip{,6}mr_free_table, to
document the locking schema and to prevent future possible introduction
of 'table del' operation from breaking it.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recent kernels cause a lot of TCP retransmissions
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 2.24 GBytes 19.2 Gbits/sec 2767 442 KBytes
[ 5] 1.00-2.00 sec 2.23 GBytes 19.1 Gbits/sec 2312 350 KBytes
^^^^
Replacing the qdisc with pfifo makes retransmissions go away.
It appears that a flow may have a delayed packet with a very near
Tx time. Later, we may get busy processing Rx and the target Tx time
will pass, but we won't service Tx since the CPU is busy with Rx.
If Rx sees an ACK and we try to push more data for the delayed flow
we may fastpath the skb, not realizing that there are already "ready
to send" packets for this flow sitting in the qdisc.
Don't trust the fastpath if we are "behind" according to the projected
Tx time for next flow waiting in the Qdisc. Because we consider anything
within the offload window to be okay for fastpath we must consider
the entire offload window as "now".
Qdisc config:
qdisc fq 8001: dev eth0 parent 1234:1 limit 10000p flow_limit 100p \
buckets 32768 orphan_mask 1023 bands 3 \
priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 \
weights 589824 196608 65536 quantum 3028b initial_quantum 15140b \
low_rate_threshold 550Kbit \
refill_delay 40ms timer_slack 10us horizon 10s horizon_drop
For iperf this change seems to do fine, the reordering is gone.
The fastpath still gets used most of the time:
gc 0 highprio 0 fastpath 142614 throttled 418309 latency 19.1us
xx_behind 2731
where "xx_behind" counts how many times we hit the new "return false".
CC: stable@vger.kernel.org
Fixes: 076433bd78 ("net_sched: sch_fq: add fast path for mostly idle qdisc")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241124022148.3126719-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When phy_ethtool_set_eee_noneg() detects a change in the LPI
parameters, it attempts to update phylib state and trigger the link
to cycle so the MAC sees the updated parameters.
However, in doing so, it sets phydev->enable_tx_lpi depending on
whether the EEE configuration allows the MAC to generate LPI without
taking into account the result of negotiation.
This can be demonstrated with a 1000base-T FD interface by:
# ethtool --set-eee eno0 advertise 8 # cause EEE to be not negotiated
# ethtool --set-eee eno0 tx-lpi off
# ethtool --set-eee eno0 tx-lpi on
This results in being true, despite EEE not having been negotiated and:
# ethtool --show-eee eno0
EEE status: enabled - inactive
Tx LPI: 250 (us)
Supported EEE link modes: 100baseT/Full
1000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
Fix this by keeping track of whether EEE was negotiated via a new
eee_active member in struct phy_device, and include this state in
the decision whether phydev->enable_tx_lpi should be set.
Fixes: 3e43b903da ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tErSe-005RhB-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- SCO: remove the redundant sco_conn_put
- MGMT: Fix slab-use-after-free Read in set_powered_sync
- MGMT: Fix possible deadlocks
* tag 'for-net-2024-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: SCO: remove the redundant sco_conn_put
Bluetooth: MGMT: Fix possible deadlocks
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
====================
Link: https://patch.msgid.link/20241126165149.899213-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Michal Luczaj says:
====================
net: Fix some callers of copy_from_sockptr()
Some callers misinterpret copy_from_sockptr()'s return value. The function
follows copy_from_user(), i.e. returns 0 for success, or the number of
bytes not copied on error. Simply returning the result in a non-zero case
isn't usually what was intended.
Compile tested with CONFIG_LLC, CONFIG_AF_RXRPC, CONFIG_BT enabled.
Last patch probably belongs more to net-next, if any. Here as an RFC.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20241119-sockptr-copy-fixes-v3-0-d752cac4be8e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
copy_from_sockptr() has a history of misuse. Add a comment explaining that
the function follows API of copy_from_user(), i.e. returns 0 for success,
or number of bytes not copied on error.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
copy_from_sockptr() does not return negative value on error; instead, it
reports the number of bytes that failed to copy. Since it's deprecated,
switch to copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(unsigned int)` check as
copy_safe_from_sockptr() by itself would also accept
optlen > sizeof(unsigned int). Which would allow a more lenient handling
of inputs.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
copy_from_sockptr() is used incorrectly: return value is the number of
bytes that could not be copied. Since it's deprecated, switch to
copy_safe_from_sockptr().
Note: Keeping the `optlen != sizeof(int)` check as copy_safe_from_sockptr()
by itself would also accept optlen > sizeof(int). Which would allow a more
lenient handling of inputs.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: David Wei <dw@davidwei.uk>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
