This reverts commit 88b065943c.
Lenovo 82TQ is unhappy if we do the display on sequence this
late. The display output shows severe corruption.
It's unclear if this is a failure on our part (perhaps
something to do with sending commands in LP mode after HS
/video mode transmission has been started? Though the backlight
on command at least seems to work) or simply that there are
some commands in the sequence that are needed to be done
earlier (eg. could be some DSC init stuff?). If the latter
then I don't think the current Windows code would work
either, but maybe this was originally tested with an older
driver, who knows.
Root causing this fully would likely require a lot of
experimentation which isn't really feasible without direct
access to the machine, so let's just accept failure and
go back to the original sequence.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10071
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116210821.30194-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc'
18 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-3-rdunlap@infradead.org
(cherry picked from commit e4cf1a70fa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
MST connectors don't have a static attached encoder, as their encoder
can change depending on the pipe they use; so the encoder for an MST
connector can't be retrieved using intel_dp_attached_encoder() (which
may return NULL for MST). Most of the PSR debugfs entries depend on a
static connector -> encoder mapping which is only true for eDP and SST
DP connectors and not for MST. These debugfs entries were enabled for
MST connectors as well recently to provide PR information for them, but
handling MST connectors needs more changes.
Fix this by not adding for now the PSR entries on MST connectors. To
make things more uniform add the entries for SST connectors on all
platforms, not just on platforms supporting DP2.0.
v2:
- Keep adding the entries for SST connectors. (Jouni)
- Add a TODO: comment for MST support.
Fixes: ef75c25e8f ("drm/i915/panelreplay: Debugfs support for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9850
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103152609.2434100-1-imre.deak@intel.com
(cherry picked from commit 9b0b61c5bc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Add pll selection check for C20 as well as
clock state verification0. We have been relying
on sw state to select A or B pll's. This is incorrect
as the hw might see this selection differently. This
patch fixes this shortcoming by reading pll selection
for both sw and hw states and compares if these two
selections match.
Fixes: 59be90248b ("drm/i915/mtl: C20 state verification")
v2: reword commit message and include fix to a
original commit (Imre)
Compare pll selection (Jani)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102115741.118525-2-mika.kahola@intel.com
(cherry picked from commit f4304beadd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
With Xe2_LPD, there were changes to the way CDCLK_CTL must be
programmed. Those were reflected on _bxt_set_cdclk() with commit
3d3696c0fe ("drm/i915/lnl: Start using CDCLK through PLL"), but
bxt_sanitize_cdclk() was left out.
This was causing some issues when loading the driver with a pre-existing
active display configuration: the driver would mistakenly take the
current value of CDCLK_CTL as wrong and the sanitization would be
triggered.
In a scenario where the display was already configured with a high
CDCLKC and had plane(s) enabled, FIFO underrun errors were reported,
because the current sanitization code selects the minimum possible
CDCLK.
Fix that by updating bxt_sanitize_cdclk() to match the changes made in
_bxt_set_cdclk(). Ideally, we would have a common function to derive the
value for CDCLK_CTL, but that can be done in a future change.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-2-gustavo.sousa@intel.com
An AUX transfer on any disconnected DP port results in long
timeout/retry delays the same way as this is described for TypeC port in
commit a972cd3f0e ("drm/i915/tc: Abort DP AUX transfer on a disconnected TC port")
Prevent the delay on non-TypeC ports as well by aborting the transfer if
the port is disconnected. For eDP keep the current behavior as the
support for HPD signaling is optional for it.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-13-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Glitches deasserting the connector HPD line can lead to incorrectly
detecting a disconnect event (a glitch asserting the line will only
cause a redundant connect->disconnect transition). The source of such a
glitch can be noise on the line or a 0.5ms-1ms MST IRQ_HPD pulse. TypeC
ports in the DP-alt or TBT-alt mode filter out these glitches inernally,
but for others the driver has to do this. Make it so by polling the HPD
line on these connectors for 4 ms.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-12-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Add hooks to intel_digital_port to lock and unlock the port and add a
helper to check the connector's detect status while the port is locked
already. This simplifies checking the connector detect status in
intel_dp_aux_xfer() and intel_digital_port_connected() in the next two
patches aborting AUX transfers on all DP connectors (except eDP) and
filtering HPD glitches.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-11-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
As described in the previous patch, an unexpected connector
detection/modeset started from the intel_hotplug::hotplug_work can
happen during the driver init/shutdown sequence. Prevent these by
disabling the queuing of and flushing all the intel_hotplug work that
can start them at the beginning of the init/shutdown sequence and allow
the queuing only while the display is in the initialized state.
Other work items - like the intel_connector::modeset_retry_work or the
MST probe works - are still enabled and can start a detection/modeset,
but after the previous patch these will be rejected. Disabling these
works as well is for a follow-up patchset.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-9-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
An unexpected modeset or connector detection by a user (user space or FB
console) during the initialization/shutdown sequence is possible either
via a hotplug IRQ handling work or via the connector sysfs
(status/detect) interface. These modesets/detections should be prevented
by disabling/flushing all related hotplug handling work and
unregistering the interfaces that can start them at the beginning of the
shutdown sequence. Some of this - disabling all related intel_hotplug
work - will be done by the next patch, but others - for instance
disabling the MST hotplug works - require a bigger rework.
It makes sense - for diagnostic purpose, even with all the above work and
interface disabled - to detect and reject any such user access. This
patch does that for modeset accesses and a follow-up patch for connector
detection.
During driver loading/unloading/system suspend/shutdown and during
system resume after calling intel_display_driver_disable_user_access()
or intel_display_driver_resume_access() correspondigly, the current
thread is allowed to modeset (as this thread requires to do an
initial/restoring modeset or a disabling modeset), other threads (the
user threads) are not allowed to modeset.
During driver loading/system resume after calling
intel_display_driver_enable_user_access() all threads are allowed to
modeset.
During driver unloading/system suspend/shutdown after calling
intel_display_driver_suspend_access() no threads are allowed to modeset
(as the HW got disabled and should stay in this state).
v2: Call intel_display_driver_suspend_access()/resume_access() only
for HAS_DISPLAY(). (CI)
v3: (Jouni)
- Add commit log comments explaining how the permission of modeset
changes during HW init/deinit wrt. to the current and other user
processes.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104132335.2766434-1-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Suspend the FB console during driver shutdown the same way this is done
during system resume. This should prevent any HPD event to trigger a new
FB probe/modeset cycle happening in parallel with the display HW
disable/uninitialize steps.
A preceding FB HPD event handling may be still pending, resulting in a
probe/modeset like the above, these will be prevented by a later change
in this patchset.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-6-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
The only purpose of intel_hpd_poll_disable() during driver loading and
system resume - at which point polling should be disabled anyway, except
for connectors in an IRQ storm, for which the polling will stay enabled -
is to force-detect all the connectors. However this detection in
i915_hpd_poll_init_work() depends on drm.mode_config.poll_enabled, which
will get set in drm_kms_helper_poll_init(), possibly after
i915_hpd_poll_init_work() is scheduled. Hence the initial detection of
connectors during driver loading may not happen.
Fix the above by moving intel_hpd_poll_disable() after
i915_hpd_poll_init_work(), the proper place anyway for doing the above
detection after all the HW initialization steps are complete. Change the
order the same way during system resume as well. The above race
condition shouldn't matter here - as drm.mode_config.poll_enabled will
be set - but the detection should happen here as well after the HW init
steps are done.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-5-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Deinitialize audio during driver unload after disabling polling. This is
in preparation to do all the display HW init/deinit steps at a point
where no HPD IRQ or polling initiated connector detection or modeset can
change the HW state. This may still happen here via an HPD IRQ ->
hotplug detection work or a connector sysfs (state/detect) access, but
these will be prevented by later changes in this patchset.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-4-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
If an HPD IRQ storm is detected on a connector during driver loading or
system suspend/resume - disabling the IRQ and switching to polling - the
polling may get disabled too early - before the intended 2 minute
HPD_STORM_REENABLE_DELAY - with the HPD IRQ staying disabled for this
duration. One such sequence is:
Thread#1 Thread#2
intel_display_driver_probe()->
intel_hpd_init()->
(HPD IRQ gets enabled)
. intel_hpd_irq_handler()->
. intel_hpd_irq_storm_detect()
. intel_hpd_irq_setup()->
. (HPD IRQ gets disabled)
. queue_delayed_work(hotplug.hotplug_work)
. ...
. i915_hotplug_work_func()->
. intel_hpd_irq_storm_switch_to_polling()->
. (polling enabled)
.
intel_hpd_poll_disable()->
queue_work(hotplug.poll_init_work)
...
i915_hpd_poll_init_work()->
(polling gets disabled,
HPD IRQ is still disabled)
...
(Connector is neither polled or
detected via HPD IRQs for 2 minutes)
intel_hpd_irq_storm_reenable_work()->
(HPD IRQ gets enabled)
To avoid the above 2 minute state without either polling or enabled HPD
IRQ, leave the connector's polling mode unchanged in
i915_hpd_poll_init_work() if its HPD IRQ got disabled after an IRQ storm
indicated by the connector's HPD_DISABLED pin state.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-3-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
After an HPD IRQ storm on a connector intel_hpd_irq_storm_detect() will
set the connector's HPD pin state to HPD_MARK_DISABLED and the IRQ gets
disabled. Subsequently intel_hpd_irq_storm_switch_to_polling() will
enable polling for these connectors, setting the pin state to
HPD_DISABLED, but only if the connector's base.polled field is set to
DRM_CONNECTOR_POLL_HPD. intel_hpd_irq_storm_reenable_work() will
reenable the IRQ - after 2 minutes - if the pin state is HPD_DISABLED.
The connectors will be created with their base.polled field set to 0,
which gets initialized only later in i915_hpd_poll_init_work() (using
intel_connector::polled). If a storm is detected on a connector after
it's created and IRQs are enabled on it - by intel_hpd_init() - and
before its bease.polled field is initialized in the above work, the
connector's HPD pin will stay in the HPD_MARK_DISABLED state - leaving
the IRQ disabled indefinitely - and polling will not get enabled on it as
intended.
I can't see a reason for initializing base.polled in a delayed manner,
so do this already when creating the connector, to prevent the above
race condition.
Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-2-imre.deak@intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
