Ajay Neeli <ajay.neeli@amd.com> says:
This patch series adds support for the UFS driver on the AMD Versal
Gen 2 SoC. It includes:
- Device tree bindings and driver implementation.
- Secure read support for the secure retrieval of UFS calibration
values.
The UFS host driver is based upon the Synopsis DesignWare (DWC) UFS
architecture, utilizing the existing UFSHCD_DWC and UFSHCD_PLATFORM
drivers.
Link: https://patch.msgid.link/20251021113003.13650-1-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
This patch series includes two bug fixes for this development cycle
and six small patches that are intended for the next merge window. If
applying the first two patches only during the current development
cycle would be inconvenient, postponing all patches until the next
merge window is fine with me.
Please consider including these patches in the upstream kernel.
Thanks,
Bart.
[mkp: Applied patches #1 and #2 to 6.18/scsi-fixes]
Link: https://patch.msgid.link/20251014200118.3390839-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building the qla1280 driver with DEBUG_QLA1280 set will emit compiler
warnings. Fix some print formatting strings to reflect the correct type
of printed variables as well as remove unused code. (static function
ql1280_dump_device) in order to avoid compiler warnings.
[mkp: fixed a few more checkpatch warnings]
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20251002052604.24590-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Peter Wang <peter.wang@mediatek.com says>:
Improves the UFS Mediatek driver by correcting clock scaling with PM
QoS, and adjusting power management flows. It addresses
shutdown/suspend race conditions, and removes redundant
functions. Support for new platforms is added with the MMIO_OTSD_CTRL
register, and MT6991 performance is optimized with MRTT and random
improvements. These changes collectively enhance driver performance,
stability, and compatibility.
Changes since v1:
1. Remove two patches that will be fixed in UFS core.
- ufs: host: mediatek: Fix runtime suspend error deadlock
- ufs: host: mediatek: Enable interrupts for MCQ mode
2. Use hba->shutting_down instead of ufshcd_is_user_access_allowed
v1:
https://patch.msgid.link/20250918104000.208856-1-peter.wang@mediatek.com
Link: https://patch.msgid.link/20250924094527.2992256-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce support for a new UFS Mediatek platform by adding the
REG_UFS_UFS_MMIO_OTSD_CTRL register. This update includes checks for
legacy platforms and uses the new register to replace debug selection
and handle specific operations. The changes ensure compatibility across
different hardware versions and prevent potential issues with debug
usage on newer platforms.
Additional updates include error logging improvements during link setup
for newer and legacy platforms, ensuring proper event logging and
debugging.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://patch.msgid.link/20250924094527.2992256-8-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bao D. Nguyen <quic_nguyenb@quicinc.com> says:
Multiple ufs device manufacturers request support for the
UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the Qualcomm's platform
driver. After checking further with the major UFS manufacturers
engineering teams such as Samsung, Kioxia, SK Hynix and Micron, all
the manufacturers require this quirk. Since the quirk is needed by all
the ufs device manufacturers, remove the quirk in the ufs core driver
and implement a universal delay for all the ufs devices.
In addition to verifying with the public device's datasheets, the ufs
device manufacturer's engineering teams confirmed the required vcc
power-off time for the devices is a minimum of 1ms before vcc can be
powered on again. The existing 5ms delay implemented in the ufs core
driver seems too conservative, so replace the hard coded 5ms delay
with a variable default to 2ms setting to improve the system resume
latency. The platform drivers can override this setting as needed.
Link: https://patch.msgid.link/cover.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After the UFS device VCC is turned off, all the UFS device manufacturers
require a period of power-off time before the VCC can be turned on
again. This requirement has been confirmed with all the UFS device
manufacturer's datasheets.
Remove the UFS_DEVICE_QUIRK_DELAY_AFTER_LPM quirk in the UFS core driver
and implement a universal delay that is required by all the UFS device
manufacturers. In addition, remove the support for this quirk in the
platform drivers.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/25f134d5a42e8b8365be64d512d1bb5fc2bce6ff.1760383740.git.quic_nguyenb@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the new TRAILING_OVERLAP() helper to fix the following warnings:
drivers/scsi/megaraid/megaraid_sas_fusion.h:1153:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/scsi/megaraid/megaraid_sas_fusion.h:1198:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM) and a
set of MEMBERS that would otherwise follow it --in this case 'struct
MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES_DYN]' and 'struct
MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES]' in the corresponding
structures.
This overlays the trailing members onto the FAM (struct MR_LD_SPAN_MAP
ldSpanMap[];) while keeping the FAM and the start of MEMBERS aligned.
The static_assert() ensures this alignment remains, and it's
intentionally placed inmediately after the corresponding structures --no
blank line in between.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aM1E7Xa8qYdZ598N@kspp
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration (which happens to be in a union, so
we're moving the entire union) to the end of the corresponding
structure. Notice that `struct ssp_response_iu` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/scsi/isci/task.h:92:11: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aM09bpl1xj9KZSZl@kspp
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
Pull slab fix from Vlastimil Babka:
"A NULL pointer deref hotfix"
* tag 'slab-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: fix barn NULL pointer dereference on memoryless nodes
Pull more updates from Andrew Morton:
"Just one series here - Mike Rappoport has taught KEXEC handover to
preserve vmalloc allocations across handover"
* tag 'mm-nonmm-stable-2025-10-10-15-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/test_kho: use kho_preserve_vmalloc instead of storing addresses in fdt
kho: add support for preserving vmalloc allocations
kho: replace kho_preserve_phys() with kho_preserve_pages()
kho: check if kho is finalized in __kho_preserve_order()
MAINTAINERS, .mailmap: update Umang's email address
