IDT 79RC3243x SoCs integrated a gpio controller, which handles up
to 32 gpios. All gpios could be used as an interrupt source.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Drop gpio_regmap_set_drvdata() and instead add it to the configuration
data passed to gpio_regmap_register().
gpio_regmap_set_drvdata() can't really be used in a race free way. This
is because the gpio_regmap object which is needed by _set_drvdata() is
returned by gpio_regmap_register(). On the other hand, the callbacks
which use the drvdata might already be called right after the
gpiochip_add() call in gpio_regmap_register(). Therefore, we have to
provide the drvdata early before we call gpiochip_add().
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
For more than 15 years we may not get into ->irq_set_type()
without any meaningful type provided.
Drop redundant check in dwapb_irq_set_type().
See the commit e76de9f8eb ("[PATCH] genirq: add SA_TRIGGER support")
out of curiosity.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fixed multiple bare uses of 'unsigned' without int.
Reported by checkpatch.
Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Split fastpath array to two, i.e. for mask and for bits.
At the same time declare them as bitmaps.
This makes code better to read and gives a clue about use of
bitmap API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Convert the OMAP GPIO Device Tree binding documentation to json-schema.
The GPIO hogs node names defined to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
This change isn't removing the 'DT probe failed' message, as some may find
it useful as a reason for the failed probe. But that can be part of another
change if needed.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The tegra186_gpio_remove hook simply does a return 0.
Not defining it yields pretty much the same result.
So, this can be removed.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The handling of the return value from devm_gpiochip_add_data() is a bit
redundant. It prints messages on error and success cases.
While the success message may be useful, it is more in the area of log
spam, and these can be printed with other forms of kernel logging.
This change does a direct return with devm_gpiochip_add_data() in the probe
function.
The platform_set_drvdata() is needed, as this driver uses the stored
private date in the PM suspend/resume routines.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
This also means that the 'err' label can be removed and all goto statements
replaced with direct returns (with error codes).
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information.
Since the driver doesn't do that, it's not useful to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The sysfs_emit() function was introduced to make it less ambiguous
which function is preferred when writing to the output buffer in
a "show" callback [1].
Convert the GPIO library sysfs interface from sprintf() to sysfs_emit()
accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly
returns the number of bytes written into the buffer.
No functional change intended.
[1] Documentation/filesystems/sysfs.rst
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We have for some time the assign_bit() API to replace open coded
if (foo)
set_bit(n, bar);
else
clear_bit(n, bar);
Use this API in GPIO library code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The platform_set_drvdata() call is only useful if we need to retrieve back
the private information. Since the driver doesn't do that, it's not useful
to have it.
If this is removed, we can also just do a direct return on
devm_gpiochip_add_data(). We don't need to print that this call failed as
there are other ways to log/see this during probe.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The IRQ is registered via devm_request_threaded_irq(), making the driver
only partially device-managed. This changeset converts the entire driver
to using only devres APIs.
This change also removes platform_set_drvdata() since the information is
never retrieved to be used in the driver.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bart: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
In IRQ handler interrupts are already disabled, hence no need
to repeat it. Even in the threaded case, it is not a problem
because IRQ framework keeps interrupt disabled there as well.
Remove disabling IRQ part in the handler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neeli Srinivas <sneeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
It seems that Xilinx GPIO driver operates with bit arrays longer than 32 and
thus can leverage bitmap APIs for that. It makes code better to understand.
The ->probe() function is modified to try read properties for both channels
since is_dual check makes only sense for the amount of pins used for the second
channel. On top of that kzalloc() guarantees zero initial values for the fields
in the private data structure, hence drop unneeded conditionals and assignments.
The change is inspired by Syed Nayyar Waris' ideas about bitmap API extension.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neeli Srinivas <sneeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
With the new helpers, i.e. xgpio_read_chan() / xgpio_write_chan(),
the code is easier to read and maintain. No functional changes
intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neeli Srinivas <sneeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Currently the bitmap_remap() and bitmap_bitremap() are available
only for CONFIG_NUMA=y case, while some users may benefit out of it
and being independent to NUMA code. Make them available to users
by moving out of ifdeffery and exporting for modules.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neeli Srinivas <sneeli@xilinx.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Current dts files with RK3328 GRF 'gpio' nodes are manually verified.
In order to automate this process rk3328-grf-gpio.txt has to be
converted to YAML.
Rename 'grf-gpio' nodename to 'gpio'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Commit b9d79e4ca4 ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.
It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:
drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
^
Fix it.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm fixes from Dave Airlie:
"Bit later than usual, I queued them all up on Friday then promptly
forgot to write the pull request email. This is mainly amdgpu fixes,
with some radeon/msm/fbdev and one i915 gvt fix thrown in.
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
msm:
- NULL ptr dereference fix
fbdev:
- procfs disabled warning fix
i915:
- gvt: Fix a possible division by zero in vgpu display rate
calculation"
* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Use device specific BO size & stride check.
drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
drm/amd/pm: initialize variable
drm/radeon: Avoid power table parsing memory leaks
drm/radeon: Fix off-by-one power_state index heap overwrite
drm/amd/display: Fix two cursor duplication when using overlay
drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
fbmem: Mark proc_fb_seq_ops as __maybe_unused
drm/msm/dpu: Delete bonkers code
drm/i915/gvt: Prevent divided by zero when calculating refresh rate
amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
drm/amdgpu: Register VGA clients after init can no longer fail
drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
drm/amdgpu: fix r initial values
drm/amd/display: fix wrong statement in mst hpd debugfs
amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
drm/amd/display: Reject non-zero src_y and src_x for video planes
Pull block fix from Jens Axboe:
"Turns out the bio max size change still has issues, so let's get it
reverted for 5.13-rc1. We'll shake out the issues there and defer it
to 5.14 instead"
* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
Revert "bio: limit bio max size"
Pull cifs fixes from Steve French:
"Three small SMB3 chmultichannel related changesets (also for stable)
from the SMB3 test event this week.
The other fixes are still in review/testing"
* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: if max_channels set to more than one channel request multichannel
smb3: do not attempt multichannel to server which does not support it
smb3: when mounting with multichannel include it in requested capabilities
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
